summaryrefslogtreecommitdiff
path: root/drivers/scsi/53c700.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/53c700.c')
-rw-r--r--drivers/scsi/53c700.c2175
1 files changed, 2175 insertions, 0 deletions
diff --git a/drivers/scsi/53c700.c b/drivers/scsi/53c700.c
new file mode 100644
index 000000000000..a591fcb8aab1
--- /dev/null
+++ b/drivers/scsi/53c700.c
@@ -0,0 +1,2175 @@
+/* -*- mode: c; c-basic-offset: 8 -*- */
+
+/* NCR (or Symbios) 53c700 and 53c700-66 Driver
+ *
+ * Copyright (C) 2001 by James.Bottomley@HansenPartnership.com
+**-----------------------------------------------------------------------------
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** This program is distributed in the hope that it will be useful,
+** but WITHOUT ANY WARRANTY; without even the implied warranty of
+** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+** GNU General Public License for more details.
+**
+** You should have received a copy of the GNU General Public License
+** along with this program; if not, write to the Free Software
+** Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+**
+**-----------------------------------------------------------------------------
+ */
+
+/* Notes:
+ *
+ * This driver is designed exclusively for these chips (virtually the
+ * earliest of the scripts engine chips). They need their own drivers
+ * because they are missing so many of the scripts and snazzy register
+ * features of their elder brothers (the 710, 720 and 770).
+ *
+ * The 700 is the lowliest of the line, it can only do async SCSI.
+ * The 700-66 can at least do synchronous SCSI up to 10MHz.
+ *
+ * The 700 chip has no host bus interface logic of its own. However,
+ * it is usually mapped to a location with well defined register
+ * offsets. Therefore, if you can determine the base address and the
+ * irq your board incorporating this chip uses, you can probably use
+ * this driver to run it (although you'll probably have to write a
+ * minimal wrapper for the purpose---see the NCR_D700 driver for
+ * details about how to do this).
+ *
+ *
+ * TODO List:
+ *
+ * 1. Better statistics in the proc fs
+ *
+ * 2. Implement message queue (queues SCSI messages like commands) and make
+ * the abort and device reset functions use them.
+ * */
+
+/* CHANGELOG
+ *
+ * Version 2.8
+ *
+ * Fixed bad bug affecting tag starvation processing (previously the
+ * driver would hang the system if too many tags starved. Also fixed
+ * bad bug having to do with 10 byte command processing and REQUEST
+ * SENSE (the command would loop forever getting a transfer length
+ * mismatch in the CMD phase).
+ *
+ * Version 2.7
+ *
+ * Fixed scripts problem which caused certain devices (notably CDRWs)
+ * to hang on initial INQUIRY. Updated NCR_700_readl/writel to use
+ * __raw_readl/writel for parisc compatibility (Thomas
+ * Bogendoerfer). Added missing SCp->request_bufflen initialisation
+ * for sense requests (Ryan Bradetich).
+ *
+ * Version 2.6
+ *
+ * Following test of the 64 bit parisc kernel by Richard Hirst,
+ * several problems have now been corrected. Also adds support for
+ * consistent memory allocation.
+ *
+ * Version 2.5
+ *
+ * More Compatibility changes for 710 (now actually works). Enhanced
+ * support for odd clock speeds which constrain SDTR negotiations.
+ * correct cacheline separation for scsi messages and status for
+ * incoherent architectures. Use of the pci mapping functions on
+ * buffers to begin support for 64 bit drivers.
+ *
+ * Version 2.4
+ *
+ * Added support for the 53c710 chip (in 53c700 emulation mode only---no
+ * special 53c710 instructions or registers are used).
+ *
+ * Version 2.3
+ *
+ * More endianness/cache coherency changes.
+ *
+ * Better bad device handling (handles devices lying about tag
+ * queueing support and devices which fail to provide sense data on
+ * contingent allegiance conditions)
+ *
+ * Many thanks to Richard Hirst <rhirst@linuxcare.com> for patiently
+ * debugging this driver on the parisc architecture and suggesting
+ * many improvements and bug fixes.
+ *
+ * Thanks also go to Linuxcare Inc. for providing several PARISC
+ * machines for me to debug the driver on.
+ *
+ * Version 2.2
+ *
+ * Made the driver mem or io mapped; added endian invariance; added
+ * dma cache flushing operations for architectures which need it;
+ * added support for more varied clocking speeds.
+ *
+ * Version 2.1
+ *
+ * Initial modularisation from the D700. See NCR_D700.c for the rest of
+ * the changelog.
+ * */
+#define NCR_700_VERSION "2.8"
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/completion.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/proc_fs.h>
+#include <linux/blkdev.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <asm/dma.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/byteorder.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_dbg.h>
+#include <scsi/scsi_eh.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_spi.h>
+
+#include "53c700.h"
+
+/* NOTE: For 64 bit drivers there are points in the code where we use
+ * a non dereferenceable pointer to point to a structure in dma-able
+ * memory (which is 32 bits) so that we can use all of the structure
+ * operations but take the address at the end. This macro allows us
+ * to truncate the 64 bit pointer down to 32 bits without the compiler
+ * complaining */
+#define to32bit(x) ((__u32)((unsigned long)(x)))
+
+#ifdef NCR_700_DEBUG
+#define STATIC
+#else
+#define STATIC static
+#endif
+
+MODULE_AUTHOR("James Bottomley");
+MODULE_DESCRIPTION("53c700 and 53c700-66 Driver");
+MODULE_LICENSE("GPL");
+
+/* This is the script */
+#include "53c700_d.h"
+
+
+STATIC int NCR_700_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+STATIC int NCR_700_abort(struct scsi_cmnd * SCpnt);
+STATIC int NCR_700_bus_reset(struct scsi_cmnd * SCpnt);
+STATIC int NCR_700_dev_reset(struct scsi_cmnd * SCpnt);
+STATIC int NCR_700_host_reset(struct scsi_cmnd * SCpnt);
+STATIC void NCR_700_chip_setup(struct Scsi_Host *host);
+STATIC void NCR_700_chip_reset(struct Scsi_Host *host);
+STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
+STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt);
+static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
+static int NCR_700_change_queue_type(struct scsi_device *SDpnt, int depth);
+
+STATIC struct device_attribute *NCR_700_dev_attrs[];
+
+STATIC struct scsi_transport_template *NCR_700_transport_template = NULL;
+
+static char *NCR_700_phase[] = {
+ "",
+ "after selection",
+ "before command phase",
+ "after command phase",
+ "after status phase",
+ "after data in phase",
+ "after data out phase",
+ "during data phase",
+};
+
+static char *NCR_700_condition[] = {
+ "",
+ "NOT MSG_OUT",
+ "UNEXPECTED PHASE",
+ "NOT MSG_IN",
+ "UNEXPECTED MSG",
+ "MSG_IN",
+ "SDTR_MSG RECEIVED",
+ "REJECT_MSG RECEIVED",
+ "DISCONNECT_MSG RECEIVED",
+ "MSG_OUT",
+ "DATA_IN",
+
+};
+
+static char *NCR_700_fatal_messages[] = {
+ "unexpected message after reselection",
+ "still MSG_OUT after message injection",
+ "not MSG_IN after selection",
+ "Illegal message length received",
+};
+
+static char *NCR_700_SBCL_bits[] = {
+ "IO ",
+ "CD ",
+ "MSG ",
+ "ATN ",
+ "SEL ",
+ "BSY ",
+ "ACK ",
+ "REQ ",
+};
+
+static char *NCR_700_SBCL_to_phase[] = {
+ "DATA_OUT",
+ "DATA_IN",
+ "CMD_OUT",
+ "STATE",
+ "ILLEGAL PHASE",
+ "ILLEGAL PHASE",
+ "MSG OUT",
+ "MSG IN",
+};
+
+static __u8 NCR_700_SDTR_msg[] = {
+ 0x01, /* Extended message */
+ 0x03, /* Extended message Length */
+ 0x01, /* SDTR Extended message */
+ NCR_700_MIN_PERIOD,
+ NCR_700_MAX_OFFSET
+};
+
+/* This translates the SDTR message offset and period to a value
+ * which can be loaded into the SXFER_REG.
+ *
+ * NOTE: According to SCSI-2, the true transfer period (in ns) is
+ * actually four times this period value */
+static inline __u8
+NCR_700_offset_period_to_sxfer(struct NCR_700_Host_Parameters *hostdata,
+ __u8 offset, __u8 period)
+{
+ int XFERP;
+
+ __u8 min_xferp = (hostdata->chip710
+ ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
+ __u8 max_offset = (hostdata->chip710
+ ? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET);
+
+ if(offset == 0)
+ return 0;
+
+ if(period < hostdata->min_period) {
+ printk(KERN_WARNING "53c700: Period %dns is less than this chip's minimum, setting to %d\n", period*4, NCR_700_SDTR_msg[3]*4);
+ period = hostdata->min_period;
+ }
+ XFERP = (period*4 * hostdata->sync_clock)/1000 - 4;
+ if(offset > max_offset) {
+ printk(KERN_WARNING "53c700: Offset %d exceeds chip maximum, setting to %d\n",
+ offset, max_offset);
+ offset = max_offset;
+ }
+ if(XFERP < min_xferp) {
+ printk(KERN_WARNING "53c700: XFERP %d is less than minium, setting to %d\n",
+ XFERP, min_xferp);
+ XFERP = min_xferp;
+ }
+ return (offset & 0x0f) | (XFERP & 0x07)<<4;
+}
+
+static inline __u8
+NCR_700_get_SXFER(struct scsi_device *SDp)
+{
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
+
+ return NCR_700_offset_period_to_sxfer(hostdata,
+ spi_offset(SDp->sdev_target),
+ spi_period(SDp->sdev_target));
+}
+
+struct Scsi_Host *
+NCR_700_detect(struct scsi_host_template *tpnt,
+ struct NCR_700_Host_Parameters *hostdata, struct device *dev)
+{
+ dma_addr_t pScript, pSlots;
+ __u8 *memory;
+ __u32 *script;
+ struct Scsi_Host *host;
+ static int banner = 0;
+ int j;
+
+ if(tpnt->sdev_attrs == NULL)
+ tpnt->sdev_attrs = NCR_700_dev_attrs;
+
+ memory = dma_alloc_noncoherent(hostdata->dev, TOTAL_MEM_SIZE,
+ &pScript, GFP_KERNEL);
+ if(memory == NULL) {
+ printk(KERN_ERR "53c700: Failed to allocate memory for driver, detatching\n");
+ return NULL;
+ }
+
+ script = (__u32 *)memory;
+ hostdata->msgin = memory + MSGIN_OFFSET;
+ hostdata->msgout = memory + MSGOUT_OFFSET;
+ hostdata->status = memory + STATUS_OFFSET;
+ /* all of these offsets are L1_CACHE_BYTES separated. It is fatal
+ * if this isn't sufficient separation to avoid dma flushing issues */
+ BUG_ON(!dma_is_consistent(pScript) && L1_CACHE_BYTES < dma_get_cache_alignment());
+ hostdata->slots = (struct NCR_700_command_slot *)(memory + SLOTS_OFFSET);
+ hostdata->dev = dev;
+
+ pSlots = pScript + SLOTS_OFFSET;
+
+ /* Fill in the missing routines from the host template */
+ tpnt->queuecommand = NCR_700_queuecommand;
+ tpnt->eh_abort_handler = NCR_700_abort;
+ tpnt->eh_device_reset_handler = NCR_700_dev_reset;
+ tpnt->eh_bus_reset_handler = NCR_700_bus_reset;
+ tpnt->eh_host_reset_handler = NCR_700_host_reset;
+ tpnt->can_queue = NCR_700_COMMAND_SLOTS_PER_HOST;
+ tpnt->sg_tablesize = NCR_700_SG_SEGMENTS;
+ tpnt->cmd_per_lun = NCR_700_CMD_PER_LUN;
+ tpnt->use_clustering = ENABLE_CLUSTERING;
+ tpnt->slave_configure = NCR_700_slave_configure;
+ tpnt->slave_destroy = NCR_700_slave_destroy;
+ tpnt->change_queue_depth = NCR_700_change_queue_depth;
+ tpnt->change_queue_type = NCR_700_change_queue_type;
+
+ if(tpnt->name == NULL)
+ tpnt->name = "53c700";
+ if(tpnt->proc_name == NULL)
+ tpnt->proc_name = "53c700";
+
+
+ host = scsi_host_alloc(tpnt, 4);
+ if (!host)
+ return NULL;
+ memset(hostdata->slots, 0, sizeof(struct NCR_700_command_slot)
+ * NCR_700_COMMAND_SLOTS_PER_HOST);
+ for(j = 0; j < NCR_700_COMMAND_SLOTS_PER_HOST; j++) {
+ dma_addr_t offset = (dma_addr_t)((unsigned long)&hostdata->slots[j].SG[0]
+ - (unsigned long)&hostdata->slots[0].SG[0]);
+ hostdata->slots[j].pSG = (struct NCR_700_SG_List *)((unsigned long)(pSlots + offset));
+ if(j == 0)
+ hostdata->free_list = &hostdata->slots[j];
+ else
+ hostdata->slots[j-1].ITL_forw = &hostdata->slots[j];
+ hostdata->slots[j].state = NCR_700_SLOT_FREE;
+ }
+
+ for(j = 0; j < sizeof(SCRIPT)/sizeof(SCRIPT[0]); j++) {
+ script[j] = bS_to_host(SCRIPT[j]);
+ }
+
+ /* adjust all labels to be bus physical */
+ for(j = 0; j < PATCHES; j++) {
+ script[LABELPATCHES[j]] = bS_to_host(pScript + SCRIPT[LABELPATCHES[j]]);
+ }
+ /* now patch up fixed addresses. */
+ script_patch_32(script, MessageLocation,
+ pScript + MSGOUT_OFFSET);
+ script_patch_32(script, StatusAddress,
+ pScript + STATUS_OFFSET);
+ script_patch_32(script, ReceiveMsgAddress,
+ pScript + MSGIN_OFFSET);
+
+ hostdata->script = script;
+ hostdata->pScript = pScript;
+ dma_sync_single_for_device(hostdata->dev, pScript, sizeof(SCRIPT), DMA_TO_DEVICE);
+ hostdata->state = NCR_700_HOST_FREE;
+ hostdata->cmd = NULL;
+ host->max_id = 7;
+ host->max_lun = NCR_700_MAX_LUNS;
+ BUG_ON(NCR_700_transport_template == NULL);
+ host->transportt = NCR_700_transport_template;
+ host->unique_id = hostdata->base;
+ host->base = hostdata->base;
+ hostdata->eh_complete = NULL;
+ host->hostdata[0] = (unsigned long)hostdata;
+ /* kick the chip */
+ NCR_700_writeb(0xff, host, CTEST9_REG);
+ if(hostdata->chip710)
+ hostdata->rev = (NCR_700_readb(host, CTEST8_REG)>>4) & 0x0f;
+ else
+ hostdata->rev = (NCR_700_readb(host, CTEST7_REG)>>4) & 0x0f;
+ hostdata->fast = (NCR_700_readb(host, CTEST9_REG) == 0);
+ if(banner == 0) {
+ printk(KERN_NOTICE "53c700: Version " NCR_700_VERSION " By James.Bottomley@HansenPartnership.com\n");
+ banner = 1;
+ }
+ printk(KERN_NOTICE "scsi%d: %s rev %d %s\n", host->host_no,
+ hostdata->chip710 ? "53c710" :
+ (hostdata->fast ? "53c700-66" : "53c700"),
+ hostdata->rev, hostdata->differential ?
+ "(Differential)" : "");
+ /* reset the chip */
+ NCR_700_chip_reset(host);
+
+ if (scsi_add_host(host, dev)) {
+ dev_printk(KERN_ERR, dev, "53c700: scsi_add_host failed\n");
+ scsi_host_put(host);
+ return NULL;
+ }
+
+ spi_signalling(host) = hostdata->differential ? SPI_SIGNAL_HVD :
+ SPI_SIGNAL_SE;
+
+ return host;
+}
+
+int
+NCR_700_release(struct Scsi_Host *host)
+{
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)host->hostdata[0];
+
+ dma_free_noncoherent(hostdata->dev, TOTAL_MEM_SIZE,
+ hostdata->script, hostdata->pScript);
+ return 1;
+}
+
+static inline __u8
+NCR_700_identify(int can_disconnect, __u8 lun)
+{
+ return IDENTIFY_BASE |
+ ((can_disconnect) ? 0x40 : 0) |
+ (lun & NCR_700_LUN_MASK);
+}
+
+/*
+ * Function : static int data_residual (Scsi_Host *host)
+ *
+ * Purpose : return residual data count of what's in the chip. If you
+ * really want to know what this function is doing, it's almost a
+ * direct transcription of the algorithm described in the 53c710
+ * guide, except that the DBC and DFIFO registers are only 6 bits
+ * wide on a 53c700.
+ *
+ * Inputs : host - SCSI host */
+static inline int
+NCR_700_data_residual (struct Scsi_Host *host) {
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)host->hostdata[0];
+ int count, synchronous = 0;
+ unsigned int ddir;
+
+ if(hostdata->chip710) {
+ count = ((NCR_700_readb(host, DFIFO_REG) & 0x7f) -
+ (NCR_700_readl(host, DBC_REG) & 0x7f)) & 0x7f;
+ } else {
+ count = ((NCR_700_readb(host, DFIFO_REG) & 0x3f) -
+ (NCR_700_readl(host, DBC_REG) & 0x3f)) & 0x3f;
+ }
+
+ if(hostdata->fast)
+ synchronous = NCR_700_readb(host, SXFER_REG) & 0x0f;
+
+ /* get the data direction */
+ ddir = NCR_700_readb(host, CTEST0_REG) & 0x01;
+
+ if (ddir) {
+ /* Receive */
+ if (synchronous)
+ count += (NCR_700_readb(host, SSTAT2_REG) & 0xf0) >> 4;
+ else
+ if (NCR_700_readb(host, SSTAT1_REG) & SIDL_REG_FULL)
+ ++count;
+ } else {
+ /* Send */
+ __u8 sstat = NCR_700_readb(host, SSTAT1_REG);
+ if (sstat & SODL_REG_FULL)
+ ++count;
+ if (synchronous && (sstat & SODR_REG_FULL))
+ ++count;
+ }
+#ifdef NCR_700_DEBUG
+ if(count)
+ printk("RESIDUAL IS %d (ddir %d)\n", count, ddir);
+#endif
+ return count;
+}
+
+/* print out the SCSI wires and corresponding phase from the SBCL register
+ * in the chip */
+static inline char *
+sbcl_to_string(__u8 sbcl)
+{
+ int i;
+ static char ret[256];
+
+ ret[0]='\0';
+ for(i=0; i<8; i++) {
+ if((1<<i) & sbcl)
+ strcat(ret, NCR_700_SBCL_bits[i]);
+ }
+ strcat(ret, NCR_700_SBCL_to_phase[sbcl & 0x07]);
+ return ret;
+}
+
+static inline __u8
+bitmap_to_number(__u8 bitmap)
+{
+ __u8 i;
+
+ for(i=0; i<8 && !(bitmap &(1<<i)); i++)
+ ;
+ return i;
+}
+
+/* Pull a slot off the free list */
+STATIC struct NCR_700_command_slot *
+find_empty_slot(struct NCR_700_Host_Parameters *hostdata)
+{
+ struct NCR_700_command_slot *slot = hostdata->free_list;
+
+ if(slot == NULL) {
+ /* sanity check */
+ if(hostdata->command_slot_count != NCR_700_COMMAND_SLOTS_PER_HOST)
+ printk(KERN_ERR "SLOTS FULL, but count is %d, should be %d\n", hostdata->command_slot_count, NCR_700_COMMAND_SLOTS_PER_HOST);
+ return NULL;
+ }
+
+ if(slot->state != NCR_700_SLOT_FREE)
+ /* should panic! */
+ printk(KERN_ERR "BUSY SLOT ON FREE LIST!!!\n");
+
+
+ hostdata->free_list = slot->ITL_forw;
+ slot->ITL_forw = NULL;
+
+
+ /* NOTE: set the state to busy here, not queued, since this
+ * indicates the slot is in use and cannot be run by the IRQ
+ * finish routine. If we cannot queue the command when it
+ * is properly build, we then change to NCR_700_SLOT_QUEUED */
+ slot->state = NCR_700_SLOT_BUSY;
+ hostdata->command_slot_count++;
+
+ return slot;
+}
+
+STATIC void
+free_slot(struct NCR_700_command_slot *slot,
+ struct NCR_700_Host_Parameters *hostdata)
+{
+ if((slot->state & NCR_700_SLOT_MASK) != NCR_700_SLOT_MAGIC) {
+ printk(KERN_ERR "53c700: SLOT %p is not MAGIC!!!\n", slot);
+ }
+ if(slot->state == NCR_700_SLOT_FREE) {
+ printk(KERN_ERR "53c700: SLOT %p is FREE!!!\n", slot);
+ }
+
+ slot->resume_offset = 0;
+ slot->cmnd = NULL;
+ slot->state = NCR_700_SLOT_FREE;
+ slot->ITL_forw = hostdata->free_list;
+ hostdata->free_list = slot;
+ hostdata->command_slot_count--;
+}
+
+
+/* This routine really does very little. The command is indexed on
+ the ITL and (if tagged) the ITLQ lists in _queuecommand */
+STATIC void
+save_for_reselection(struct NCR_700_Host_Parameters *hostdata,
+ struct scsi_cmnd *SCp, __u32 dsp)
+{
+ /* Its just possible that this gets executed twice */
+ if(SCp != NULL) {
+ struct NCR_700_command_slot *slot =
+ (struct NCR_700_command_slot *)SCp->host_scribble;
+
+ slot->resume_offset = dsp;
+ }
+ hostdata->state = NCR_700_HOST_FREE;
+ hostdata->cmd = NULL;
+}
+
+STATIC inline void
+NCR_700_unmap(struct NCR_700_Host_Parameters *hostdata, struct scsi_cmnd *SCp,
+ struct NCR_700_command_slot *slot)
+{
+ if(SCp->sc_data_direction != DMA_NONE &&
+ SCp->sc_data_direction != DMA_BIDIRECTIONAL) {
+ if(SCp->use_sg) {
+ dma_unmap_sg(hostdata->dev, SCp->buffer,
+ SCp->use_sg, SCp->sc_data_direction);
+ } else {
+ dma_unmap_single(hostdata->dev, slot->dma_handle,
+ SCp->request_bufflen,
+ SCp->sc_data_direction);
+ }
+ }
+}
+
+STATIC inline void
+NCR_700_scsi_done(struct NCR_700_Host_Parameters *hostdata,
+ struct scsi_cmnd *SCp, int result)
+{
+ hostdata->state = NCR_700_HOST_FREE;
+ hostdata->cmd = NULL;
+
+ if(SCp != NULL) {
+ struct NCR_700_command_slot *slot =
+ (struct NCR_700_command_slot *)SCp->host_scribble;
+
+ NCR_700_unmap(hostdata, SCp, slot);
+ dma_unmap_single(hostdata->dev, slot->pCmd,
+ sizeof(SCp->cmnd), DMA_TO_DEVICE);
+ if(SCp->cmnd[0] == REQUEST_SENSE && SCp->cmnd[6] == NCR_700_INTERNAL_SENSE_MAGIC) {
+#ifdef NCR_700_DEBUG
+ printk(" ORIGINAL CMD %p RETURNED %d, new return is %d sense is\n",
+ SCp, SCp->cmnd[7], result);
+ scsi_print_sense("53c700", SCp);
+
+#endif
+ /* restore the old result if the request sense was
+ * successful */
+ if(result == 0)
+ result = SCp->cmnd[7];
+ /* now restore the original command */
+ memcpy((void *) SCp->cmnd, (void *) SCp->data_cmnd,
+ sizeof(SCp->data_cmnd));
+ SCp->request_buffer = SCp->buffer;
+ SCp->request_bufflen = SCp->bufflen;
+ SCp->use_sg = SCp->old_use_sg;
+ SCp->cmd_len = SCp->old_cmd_len;
+ SCp->sc_data_direction = SCp->sc_old_data_direction;
+ SCp->underflow = SCp->old_underflow;
+
+ }
+ free_slot(slot, hostdata);
+#ifdef NCR_700_DEBUG
+ if(NCR_700_get_depth(SCp->device) == 0 ||
+ NCR_700_get_depth(SCp->device) > SCp->device->queue_depth)
+ printk(KERN_ERR "Invalid depth in NCR_700_scsi_done(): %d\n",
+ NCR_700_get_depth(SCp->device));
+#endif /* NCR_700_DEBUG */
+ NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) - 1);
+
+ SCp->host_scribble = NULL;
+ SCp->result = result;
+ SCp->scsi_done(SCp);
+ } else {
+ printk(KERN_ERR "53c700: SCSI DONE HAS NULL SCp\n");
+ }
+}
+
+
+STATIC void
+NCR_700_internal_bus_reset(struct Scsi_Host *host)
+{
+ /* Bus reset */
+ NCR_700_writeb(ASSERT_RST, host, SCNTL1_REG);
+ udelay(50);
+ NCR_700_writeb(0, host, SCNTL1_REG);
+
+}
+
+STATIC void
+NCR_700_chip_setup(struct Scsi_Host *host)
+{
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)host->hostdata[0];
+ __u32 dcntl_extra = 0;
+ __u8 min_period;
+ __u8 min_xferp = (hostdata->chip710 ? NCR_710_MIN_XFERP : NCR_700_MIN_XFERP);
+
+ if(hostdata->chip710) {
+ __u8 burst_disable = hostdata->burst_disable
+ ? BURST_DISABLE : 0;
+ dcntl_extra = COMPAT_700_MODE;
+
+ NCR_700_writeb(dcntl_extra, host, DCNTL_REG);
+ NCR_700_writeb(BURST_LENGTH_8 | hostdata->dmode_extra,
+ host, DMODE_710_REG);
+ NCR_700_writeb(burst_disable | (hostdata->differential ?
+ DIFF : 0), host, CTEST7_REG);
+ NCR_700_writeb(BTB_TIMER_DISABLE, host, CTEST0_REG);
+ NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY | PARITY
+ | AUTO_ATN, host, SCNTL0_REG);
+ } else {
+ NCR_700_writeb(BURST_LENGTH_8 | hostdata->dmode_extra,
+ host, DMODE_700_REG);
+ NCR_700_writeb(hostdata->differential ?
+ DIFF : 0, host, CTEST7_REG);
+ if(hostdata->fast) {
+ /* this is for 700-66, does nothing on 700 */
+ NCR_700_writeb(LAST_DIS_ENBL | ENABLE_ACTIVE_NEGATION
+ | GENERATE_RECEIVE_PARITY, host,
+ CTEST8_REG);
+ } else {
+ NCR_700_writeb(FULL_ARBITRATION | ENABLE_PARITY
+ | PARITY | AUTO_ATN, host, SCNTL0_REG);
+ }
+ }
+
+ NCR_700_writeb(1 << host->this_id, host, SCID_REG);
+ NCR_700_writeb(0, host, SBCL_REG);
+ NCR_700_writeb(ASYNC_OPERATION, host, SXFER_REG);
+
+ NCR_700_writeb(PHASE_MM_INT | SEL_TIMEOUT_INT | GROSS_ERR_INT | UX_DISC_INT
+ | RST_INT | PAR_ERR_INT | SELECT_INT, host, SIEN_REG);
+
+ NCR_700_writeb(ABORT_INT | INT_INST_INT | ILGL_INST_INT, host, DIEN_REG);
+ NCR_700_writeb(ENABLE_SELECT, host, SCNTL1_REG);
+ if(hostdata->clock > 75) {
+ printk(KERN_ERR "53c700: Clock speed %dMHz is too high: 75Mhz is the maximum this chip can be driven at\n", hostdata->clock);
+ /* do the best we can, but the async clock will be out
+ * of spec: sync divider 2, async divider 3 */
+ DEBUG(("53c700: sync 2 async 3\n"));
+ NCR_700_writeb(SYNC_DIV_2_0, host, SBCL_REG);
+ NCR_700_writeb(ASYNC_DIV_3_0 | dcntl_extra, host, DCNTL_REG);
+ hostdata->sync_clock = hostdata->clock/2;
+ } else if(hostdata->clock > 50 && hostdata->clock <= 75) {
+ /* sync divider 1.5, async divider 3 */
+ DEBUG(("53c700: sync 1.5 async 3\n"));
+ NCR_700_writeb(SYNC_DIV_1_5, host, SBCL_REG);
+ NCR_700_writeb(ASYNC_DIV_3_0 | dcntl_extra, host, DCNTL_REG);
+ hostdata->sync_clock = hostdata->clock*2;
+ hostdata->sync_clock /= 3;
+
+ } else if(hostdata->clock > 37 && hostdata->clock <= 50) {
+ /* sync divider 1, async divider 2 */
+ DEBUG(("53c700: sync 1 async 2\n"));
+ NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
+ NCR_700_writeb(ASYNC_DIV_2_0 | dcntl_extra, host, DCNTL_REG);
+ hostdata->sync_clock = hostdata->clock;
+ } else if(hostdata->clock > 25 && hostdata->clock <=37) {
+ /* sync divider 1, async divider 1.5 */
+ DEBUG(("53c700: sync 1 async 1.5\n"));
+ NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
+ NCR_700_writeb(ASYNC_DIV_1_5 | dcntl_extra, host, DCNTL_REG);
+ hostdata->sync_clock = hostdata->clock;
+ } else {
+ DEBUG(("53c700: sync 1 async 1\n"));
+ NCR_700_writeb(SYNC_DIV_1_0, host, SBCL_REG);
+ NCR_700_writeb(ASYNC_DIV_1_0 | dcntl_extra, host, DCNTL_REG);
+ /* sync divider 1, async divider 1 */
+ hostdata->sync_clock = hostdata->clock;
+ }
+ /* Calculate the actual minimum period that can be supported
+ * by our synchronous clock speed. See the 710 manual for
+ * exact details of this calculation which is based on a
+ * setting of the SXFER register */
+ min_period = 1000*(4+min_xferp)/(4*hostdata->sync_clock);
+ hostdata->min_period = NCR_700_MIN_PERIOD;
+ if(min_period > NCR_700_MIN_PERIOD)
+ hostdata->min_period = min_period;
+}
+
+STATIC void
+NCR_700_chip_reset(struct Scsi_Host *host)
+{
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)host->hostdata[0];
+ if(hostdata->chip710) {
+ NCR_700_writeb(SOFTWARE_RESET_710, host, ISTAT_REG);
+ udelay(100);
+
+ NCR_700_writeb(0, host, ISTAT_REG);
+ } else {
+ NCR_700_writeb(SOFTWARE_RESET, host, DCNTL_REG);
+ udelay(100);
+
+ NCR_700_writeb(0, host, DCNTL_REG);
+ }
+
+ mdelay(1000);
+
+ NCR_700_chip_setup(host);
+}
+
+/* The heart of the message processing engine is that the instruction
+ * immediately after the INT is the normal case (and so must be CLEAR
+ * ACK). If we want to do something else, we call that routine in
+ * scripts and set temp to be the normal case + 8 (skipping the CLEAR
+ * ACK) so that the routine returns correctly to resume its activity
+ * */
+STATIC __u32
+process_extended_message(struct Scsi_Host *host,
+ struct NCR_700_Host_Parameters *hostdata,
+ struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps)
+{
+ __u32 resume_offset = dsp, temp = dsp + 8;
+ __u8 pun = 0xff, lun = 0xff;
+
+ if(SCp != NULL) {
+ pun = SCp->device->id;
+ lun = SCp->device->lun;
+ }
+
+ switch(hostdata->msgin[2]) {
+ case A_SDTR_MSG:
+ if(SCp != NULL && NCR_700_is_flag_set(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION)) {
+ struct scsi_target *starget = SCp->device->sdev_target;
+ __u8 period = hostdata->msgin[3];
+ __u8 offset = hostdata->msgin[4];
+
+ if(offset == 0 || period == 0) {
+ offset = 0;
+ period = 0;
+ }
+
+ spi_offset(starget) = offset;
+ spi_period(starget) = period;
+
+ if(NCR_700_is_flag_set(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION)) {
+ spi_display_xfer_agreement(starget);
+ NCR_700_clear_flag(SCp->device, NCR_700_DEV_PRINT_SYNC_NEGOTIATION);
+ }
+
+ NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
+ NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
+
+ NCR_700_writeb(NCR_700_get_SXFER(SCp->device),
+ host, SXFER_REG);
+
+ } else {
+ /* SDTR message out of the blue, reject it */
+ printk(KERN_WARNING "scsi%d Unexpected SDTR msg\n",
+ host->host_no);
+ hostdata->msgout[0] = A_REJECT_MSG;
+ dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
+ script_patch_16(hostdata->script, MessageCount, 1);
+ /* SendMsgOut returns, so set up the return
+ * address */
+ resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
+ }
+ break;
+
+ case A_WDTR_MSG:
+ printk(KERN_INFO "scsi%d: (%d:%d), Unsolicited WDTR after CMD, Rejecting\n",
+ host->host_no, pun, lun);
+ hostdata->msgout[0] = A_REJECT_MSG;
+ dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
+ script_patch_16(hostdata->script, MessageCount, 1);
+ resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
+
+ break;
+
+ default:
+ printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
+ host->host_no, pun, lun,
+ NCR_700_phase[(dsps & 0xf00) >> 8]);
+ scsi_print_msg(hostdata->msgin);
+ printk("\n");
+ /* just reject it */
+ hostdata->msgout[0] = A_REJECT_MSG;
+ dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
+ script_patch_16(hostdata->script, MessageCount, 1);
+ /* SendMsgOut returns, so set up the return
+ * address */
+ resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
+ }
+ NCR_700_writel(temp, host, TEMP_REG);
+ return resume_offset;
+}
+
+STATIC __u32
+process_message(struct Scsi_Host *host, struct NCR_700_Host_Parameters *hostdata,
+ struct scsi_cmnd *SCp, __u32 dsp, __u32 dsps)
+{
+ /* work out where to return to */
+ __u32 temp = dsp + 8, resume_offset = dsp;
+ __u8 pun = 0xff, lun = 0xff;
+
+ if(SCp != NULL) {
+ pun = SCp->device->id;
+ lun = SCp->device->lun;
+ }
+
+#ifdef NCR_700_DEBUG
+ printk("scsi%d (%d:%d): message %s: ", host->host_no, pun, lun,
+ NCR_700_phase[(dsps & 0xf00) >> 8]);
+ scsi_print_msg(hostdata->msgin);
+ printk("\n");
+#endif
+
+ switch(hostdata->msgin[0]) {
+
+ case A_EXTENDED_MSG:
+ resume_offset = process_extended_message(host, hostdata, SCp,
+ dsp, dsps);
+ break;
+
+ case A_REJECT_MSG:
+ if(SCp != NULL && NCR_700_is_flag_set(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION)) {
+ /* Rejected our sync negotiation attempt */
+ spi_period(SCp->device->sdev_target) =
+ spi_offset(SCp->device->sdev_target) = 0;
+ NCR_700_set_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
+ NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
+ } else if(SCp != NULL && NCR_700_get_tag_neg_state(SCp->device) == NCR_700_DURING_TAG_NEGOTIATION) {
+ /* rejected our first simple tag message */
+ printk(KERN_WARNING "scsi%d (%d:%d) Rejected first tag queue attempt, turning off tag queueing\n", host->host_no, pun, lun);
+ /* we're done negotiating */
+ NCR_700_set_tag_neg_state(SCp->device, NCR_700_FINISHED_TAG_NEGOTIATION);
+ hostdata->tag_negotiated &= ~(1<<SCp->device->id);
+ SCp->device->tagged_supported = 0;
+ scsi_deactivate_tcq(SCp->device, host->cmd_per_lun);
+ } else {
+ printk(KERN_WARNING "scsi%d (%d:%d) Unexpected REJECT Message %s\n",
+ host->host_no, pun, lun,
+ NCR_700_phase[(dsps & 0xf00) >> 8]);
+ /* however, just ignore it */
+ }
+ break;
+
+ case A_PARITY_ERROR_MSG:
+ printk(KERN_ERR "scsi%d (%d:%d) Parity Error!\n", host->host_no,
+ pun, lun);
+ NCR_700_internal_bus_reset(host);
+ break;
+ case A_SIMPLE_TAG_MSG:
+ printk(KERN_INFO "scsi%d (%d:%d) SIMPLE TAG %d %s\n", host->host_no,
+ pun, lun, hostdata->msgin[1],
+ NCR_700_phase[(dsps & 0xf00) >> 8]);
+ /* just ignore it */
+ break;
+ default:
+ printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
+ host->host_no, pun, lun,
+ NCR_700_phase[(dsps & 0xf00) >> 8]);
+
+ scsi_print_msg(hostdata->msgin);
+ printk("\n");
+ /* just reject it */
+ hostdata->msgout[0] = A_REJECT_MSG;
+ dma_cache_sync(hostdata->msgout, 1, DMA_TO_DEVICE);
+ script_patch_16(hostdata->script, MessageCount, 1);
+ /* SendMsgOut returns, so set up the return
+ * address */
+ resume_offset = hostdata->pScript + Ent_SendMessageWithATN;
+
+ break;
+ }
+ NCR_700_writel(temp, host, TEMP_REG);
+ /* set us up to receive another message */
+ dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE, DMA_FROM_DEVICE);
+ return resume_offset;
+}
+
+STATIC __u32
+process_script_interrupt(__u32 dsps, __u32 dsp, struct scsi_cmnd *SCp,
+ struct Scsi_Host *host,
+ struct NCR_700_Host_Parameters *hostdata)
+{
+ __u32 resume_offset = 0;
+ __u8 pun = 0xff, lun=0xff;
+
+ if(SCp != NULL) {
+ pun = SCp->device->id;
+ lun = SCp->device->lun;
+ }
+
+ if(dsps == A_GOOD_STATUS_AFTER_STATUS) {
+ DEBUG((" COMMAND COMPLETE, status=%02x\n",
+ hostdata->status[0]));
+ /* OK, if TCQ still under negotiation, we now know it works */
+ if (NCR_700_get_tag_neg_state(SCp->device) == NCR_700_DURING_TAG_NEGOTIATION)
+ NCR_700_set_tag_neg_state(SCp->device,
+ NCR_700_FINISHED_TAG_NEGOTIATION);
+
+ /* check for contingent allegiance contitions */
+ if(status_byte(hostdata->status[0]) == CHECK_CONDITION ||
+ status_byte(hostdata->status[0]) == COMMAND_TERMINATED) {
+ struct NCR_700_command_slot *slot =
+ (struct NCR_700_command_slot *)SCp->host_scribble;
+ if(SCp->cmnd[0] == REQUEST_SENSE) {
+ /* OOPS: bad device, returning another
+ * contingent allegiance condition */
+ printk(KERN_ERR "scsi%d (%d:%d) broken device is looping in contingent allegiance: ignoring\n", host->host_no, pun, lun);
+ NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]);
+ } else {
+#ifdef NCR_DEBUG
+ scsi_print_command(SCp);
+ printk(" cmd %p has status %d, requesting sense\n",
+ SCp, hostdata->status[0]);
+#endif
+ /* we can destroy the command here
+ * because the contingent allegiance
+ * condition will cause a retry which
+ * will re-copy the command from the
+ * saved data_cmnd. We also unmap any
+ * data associated with the command
+ * here */
+ NCR_700_unmap(hostdata, SCp, slot);
+
+ SCp->cmnd[0] = REQUEST_SENSE;
+ SCp->cmnd[1] = (SCp->device->lun & 0x7) << 5;
+ SCp->cmnd[2] = 0;
+ SCp->cmnd[3] = 0;
+ SCp->cmnd[4] = sizeof(SCp->sense_buffer);
+ SCp->cmnd[5] = 0;
+ SCp->cmd_len = 6;
+ /* Here's a quiet hack: the
+ * REQUEST_SENSE command is six bytes,
+ * so store a flag indicating that
+ * this was an internal sense request
+ * and the original status at the end
+ * of the command */
+ SCp->cmnd[6] = NCR_700_INTERNAL_SENSE_MAGIC;
+ SCp->cmnd[7] = hostdata->status[0];
+ SCp->use_sg = 0;
+ SCp->sc_data_direction = DMA_FROM_DEVICE;
+ dma_sync_single_for_device(hostdata->dev, slot->pCmd,
+ SCp->cmd_len, DMA_TO_DEVICE);
+ SCp->request_bufflen = sizeof(SCp->sense_buffer);
+ slot->dma_handle = dma_map_single(hostdata->dev, SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
+ slot->SG[0].ins = bS_to_host(SCRIPT_MOVE_DATA_IN | sizeof(SCp->sense_buffer));
+ slot->SG[0].pAddr = bS_to_host(slot->dma_handle);
+ slot->SG[1].ins = bS_to_host(SCRIPT_RETURN);
+ slot->SG[1].pAddr = 0;
+ slot->resume_offset = hostdata->pScript;
+ dma_cache_sync(slot->SG, sizeof(slot->SG[0])*2, DMA_TO_DEVICE);
+ dma_cache_sync(SCp->sense_buffer, sizeof(SCp->sense_buffer), DMA_FROM_DEVICE);
+
+ /* queue the command for reissue */
+ slot->state = NCR_700_SLOT_QUEUED;
+ hostdata->state = NCR_700_HOST_FREE;
+ hostdata->cmd = NULL;
+ }
+ } else {
+ // Currently rely on the mid layer evaluation
+ // of the tag queuing capability
+ //
+ //if(status_byte(hostdata->status[0]) == GOOD &&
+ // SCp->cmnd[0] == INQUIRY && SCp->use_sg == 0) {
+ // /* Piggy back the tag queueing support
+ // * on this command */
+ // dma_sync_single_for_cpu(hostdata->dev,
+ // slot->dma_handle,
+ // SCp->request_bufflen,
+ // DMA_FROM_DEVICE);
+ // if(((char *)SCp->request_buffer)[7] & 0x02) {
+ // printk(KERN_INFO "scsi%d: (%d:%d) Enabling Tag Command Queuing\n", host->host_no, pun, lun);
+ // hostdata->tag_negotiated |= (1<<SCp->device->id);
+ // NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_TAG_QUEUEING);
+ // } else {
+ // NCR_700_clear_flag(SCp->device, NCR_700_DEV_BEGIN_TAG_QUEUEING);
+ // hostdata->tag_negotiated &= ~(1<<SCp->device->id);
+ // }
+ //}
+ NCR_700_scsi_done(hostdata, SCp, hostdata->status[0]);
+ }
+ } else if((dsps & 0xfffff0f0) == A_UNEXPECTED_PHASE) {
+ __u8 i = (dsps & 0xf00) >> 8;
+
+ printk(KERN_ERR "scsi%d: (%d:%d), UNEXPECTED PHASE %s (%s)\n",
+ host->host_no, pun, lun,
+ NCR_700_phase[i],
+ sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
+ printk(KERN_ERR " len = %d, cmd =", SCp->cmd_len);
+ scsi_print_command(SCp);
+
+ NCR_700_internal_bus_reset(host);
+ } else if((dsps & 0xfffff000) == A_FATAL) {
+ int i = (dsps & 0xfff);
+
+ printk(KERN_ERR "scsi%d: (%d:%d) FATAL ERROR: %s\n",
+ host->host_no, pun, lun, NCR_700_fatal_messages[i]);
+ if(dsps == A_FATAL_ILLEGAL_MSG_LENGTH) {
+ printk(KERN_ERR " msg begins %02x %02x\n",
+ hostdata->msgin[0], hostdata->msgin[1]);
+ }
+ NCR_700_internal_bus_reset(host);
+ } else if((dsps & 0xfffff0f0) == A_DISCONNECT) {
+#ifdef NCR_700_DEBUG
+ __u8 i = (dsps & 0xf00) >> 8;
+
+ printk("scsi%d: (%d:%d), DISCONNECTED (%d) %s\n",
+ host->host_no, pun, lun,
+ i, NCR_700_phase[i]);
+#endif
+ save_for_reselection(hostdata, SCp, dsp);
+
+ } else if(dsps == A_RESELECTION_IDENTIFIED) {
+ __u8 lun;
+ struct NCR_700_command_slot *slot;
+ __u8 reselection_id = hostdata->reselection_id;
+ struct scsi_device *SDp;
+
+ lun = hostdata->msgin[0] & 0x1f;
+
+ hostdata->reselection_id = 0xff;
+ DEBUG(("scsi%d: (%d:%d) RESELECTED!\n",
+ host->host_no, reselection_id, lun));
+ /* clear the reselection indicator */
+ SDp = __scsi_device_lookup(host, 0, reselection_id, lun);
+ if(unlikely(SDp == NULL)) {
+ printk(KERN_ERR "scsi%d: (%d:%d) HAS NO device\n",
+ host->host_no, reselection_id, lun);
+ BUG();
+ }
+ if(hostdata->msgin[1] == A_SIMPLE_TAG_MSG) {
+ struct scsi_cmnd *SCp = scsi_find_tag(SDp, hostdata->msgin[2]);
+ if(unlikely(SCp == NULL)) {
+ printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n",
+ host->host_no, reselection_id, lun, hostdata->msgin[2]);
+ BUG();
+ }
+
+ slot = (struct NCR_700_command_slot *)SCp->host_scribble;
+ DEBUG(("53c700: %d:%d:%d, reselection is tag %d, slot %p(%d)\n",
+ host->host_no, SDp->id, SDp->lun,
+ hostdata->msgin[2], slot, slot->tag));
+ } else {
+ struct scsi_cmnd *SCp = scsi_find_tag(SDp, SCSI_NO_TAG);
+ if(unlikely(SCp == NULL)) {
+ printk(KERN_ERR "scsi%d: (%d:%d) no saved request for untagged cmd\n",
+ host->host_no, reselection_id, lun);
+ BUG();
+ }
+ slot = (struct NCR_700_command_slot *)SCp->host_scribble;
+ }
+
+ if(slot == NULL) {
+ printk(KERN_ERR "scsi%d: (%d:%d) RESELECTED but no saved command (MSG = %02x %02x %02x)!!\n",
+ host->host_no, reselection_id, lun,
+ hostdata->msgin[0], hostdata->msgin[1],
+ hostdata->msgin[2]);
+ } else {
+ if(hostdata->state != NCR_700_HOST_BUSY)
+ printk(KERN_ERR "scsi%d: FATAL, host not busy during valid reselection!\n",
+ host->host_no);
+ resume_offset = slot->resume_offset;
+ hostdata->cmd = slot->cmnd;
+
+ /* re-patch for this command */
+ script_patch_32_abs(hostdata->script, CommandAddress,
+ slot->pCmd);
+ script_patch_16(hostdata->script,
+ CommandCount, slot->cmnd->cmd_len);
+ script_patch_32_abs(hostdata->script, SGScriptStartAddress,
+ to32bit(&slot->pSG[0].ins));
+
+ /* Note: setting SXFER only works if we're
+ * still in the MESSAGE phase, so it is vital
+ * that ACK is still asserted when we process
+ * the reselection message. The resume offset
+ * should therefore always clear ACK */
+ NCR_700_writeb(NCR_700_get_SXFER(hostdata->cmd->device),
+ host, SXFER_REG);
+ dma_cache_sync(hostdata->msgin,
+ MSG_ARRAY_SIZE, DMA_FROM_DEVICE);
+ dma_cache_sync(hostdata->msgout,
+ MSG_ARRAY_SIZE, DMA_TO_DEVICE);
+ /* I'm just being paranoid here, the command should
+ * already have been flushed from the cache */
+ dma_cache_sync(slot->cmnd->cmnd,
+ slot->cmnd->cmd_len, DMA_TO_DEVICE);
+
+
+
+ }
+ } else if(dsps == A_RESELECTED_DURING_SELECTION) {
+
+ /* This section is full of debugging code because I've
+ * never managed to reach it. I think what happens is
+ * that, because the 700 runs with selection
+ * interrupts enabled the whole time that we take a
+ * selection interrupt before we manage to get to the
+ * reselected script interrupt */
+
+ __u8 reselection_id = NCR_700_readb(host, SFBR_REG);
+ struct NCR_700_command_slot *slot;
+
+ /* Take out our own ID */
+ reselection_id &= ~(1<<host->this_id);
+
+ /* I've never seen this happen, so keep this as a printk rather
+ * than a debug */
+ printk(KERN_INFO "scsi%d: (%d:%d) RESELECTION DURING SELECTION, dsp=%08x[%04x] state=%d, count=%d\n",
+ host->host_no, reselection_id, lun, dsp, dsp - hostdata->pScript, hostdata->state, hostdata->command_slot_count);
+
+ {
+ /* FIXME: DEBUGGING CODE */
+ __u32 SG = (__u32)bS_to_cpu(hostdata->script[A_SGScriptStartAddress_used[0]]);
+ int i;
+
+ for(i=0; i< NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
+ if(SG >= to32bit(&hostdata->slots[i].pSG[0])
+ && SG <= to32bit(&hostdata->slots[i].pSG[NCR_700_SG_SEGMENTS]))
+ break;
+ }
+ printk(KERN_INFO "IDENTIFIED SG segment as being %08x in slot %p, cmd %p, slot->resume_offset=%08x\n", SG, &hostdata->slots[i], hostdata->slots[i].cmnd, hostdata->slots[i].resume_offset);
+ SCp = hostdata->slots[i].cmnd;
+ }
+
+ if(SCp != NULL) {
+ slot = (struct NCR_700_command_slot *)SCp->host_scribble;
+ /* change slot from busy to queued to redo command */
+ slot->state = NCR_700_SLOT_QUEUED;
+ }
+ hostdata->cmd = NULL;
+
+ if(reselection_id == 0) {
+ if(hostdata->reselection_id == 0xff) {
+ printk(KERN_ERR "scsi%d: Invalid reselection during selection!!\n", host->host_no);
+ return 0;
+ } else {
+ printk(KERN_ERR "scsi%d: script reselected and we took a selection interrupt\n",
+ host->host_no);
+ reselection_id = hostdata->reselection_id;
+ }
+ } else {
+
+ /* convert to real ID */
+ reselection_id = bitmap_to_number(reselection_id);
+ }
+ hostdata->reselection_id = reselection_id;
+ /* just in case we have a stale simple tag message, clear it */
+ hostdata->msgin[1] = 0;
+ dma_cache_sync(hostdata->msgin,
+ MSG_ARRAY_SIZE, DMA_BIDIRECTIONAL);
+ if(hostdata->tag_negotiated & (1<<reselection_id)) {
+ resume_offset = hostdata->pScript + Ent_GetReselectionWithTag;
+ } else {
+ resume_offset = hostdata->pScript + Ent_GetReselectionData;
+ }
+ } else if(dsps == A_COMPLETED_SELECTION_AS_TARGET) {
+ /* we've just disconnected from the bus, do nothing since
+ * a return here will re-run the queued command slot
+ * that may have been interrupted by the initial selection */
+ DEBUG((" SELECTION COMPLETED\n"));
+ } else if((dsps & 0xfffff0f0) == A_MSG_IN) {
+ resume_offset = process_message(host, hostdata, SCp,
+ dsp, dsps);
+ } else if((dsps & 0xfffff000) == 0) {
+ __u8 i = (dsps & 0xf0) >> 4, j = (dsps & 0xf00) >> 8;
+ printk(KERN_ERR "scsi%d: (%d:%d), unhandled script condition %s %s at %04x\n",
+ host->host_no, pun, lun, NCR_700_condition[i],
+ NCR_700_phase[j], dsp - hostdata->pScript);
+ if(SCp != NULL) {
+ scsi_print_command(SCp);
+
+ if(SCp->use_sg) {
+ for(i = 0; i < SCp->use_sg + 1; i++) {
+ printk(KERN_INFO " SG[%d].length = %d, move_insn=%08x, addr %08x\n", i, ((struct scatterlist *)SCp->buffer)[i].length, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].ins, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].pAddr);
+ }
+ }
+ }
+ NCR_700_internal_bus_reset(host);
+ } else if((dsps & 0xfffff000) == A_DEBUG_INTERRUPT) {
+ printk(KERN_NOTICE "scsi%d (%d:%d) DEBUG INTERRUPT %d AT %08x[%04x], continuing\n",
+ host->host_no, pun, lun, dsps & 0xfff, dsp, dsp - hostdata->pScript);
+ resume_offset = dsp;
+ } else {
+ printk(KERN_ERR "scsi%d: (%d:%d), unidentified script interrupt 0x%x at %04x\n",
+ host->host_no, pun, lun, dsps, dsp - hostdata->pScript);
+ NCR_700_internal_bus_reset(host);
+ }
+ return resume_offset;
+}
+
+/* We run the 53c700 with selection interrupts always enabled. This
+ * means that the chip may be selected as soon as the bus frees. On a
+ * busy bus, this can be before the scripts engine finishes its
+ * processing. Therefore, part of the selection processing has to be
+ * to find out what the scripts engine is doing and complete the
+ * function if necessary (i.e. process the pending disconnect or save
+ * the interrupted initial selection */
+STATIC inline __u32
+process_selection(struct Scsi_Host *host, __u32 dsp)
+{
+ __u8 id = 0; /* Squash compiler warning */
+ int count = 0;
+ __u32 resume_offset = 0;
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)host->hostdata[0];
+ struct scsi_cmnd *SCp = hostdata->cmd;
+ __u8 sbcl;
+
+ for(count = 0; count < 5; count++) {
+ id = NCR_700_readb(host, hostdata->chip710 ?
+ CTEST9_REG : SFBR_REG);
+
+ /* Take out our own ID */
+ id &= ~(1<<host->this_id);
+ if(id != 0)
+ break;
+ udelay(5);
+ }
+ sbcl = NCR_700_readb(host, SBCL_REG);
+ if((sbcl & SBCL_IO) == 0) {
+ /* mark as having been selected rather than reselected */
+ id = 0xff;
+ } else {
+ /* convert to real ID */
+ hostdata->reselection_id = id = bitmap_to_number(id);
+ DEBUG(("scsi%d: Reselected by %d\n",
+ host->host_no, id));
+ }
+ if(hostdata->state == NCR_700_HOST_BUSY && SCp != NULL) {
+ struct NCR_700_command_slot *slot =
+ (struct NCR_700_command_slot *)SCp->host_scribble;
+ DEBUG((" ID %d WARNING: RESELECTION OF BUSY HOST, saving cmd %p, slot %p, addr %x [%04x], resume %x!\n", id, hostdata->cmd, slot, dsp, dsp - hostdata->pScript, resume_offset));
+
+ switch(dsp - hostdata->pScript) {
+ case Ent_Disconnect1:
+ case Ent_Disconnect2:
+ save_for_reselection(hostdata, SCp, Ent_Disconnect2 + hostdata->pScript);
+ break;
+ case Ent_Disconnect3:
+ case Ent_Disconnect4:
+ save_for_reselection(hostdata, SCp, Ent_Disconnect4 + hostdata->pScript);
+ break;
+ case Ent_Disconnect5:
+ case Ent_Disconnect6:
+ save_for_reselection(hostdata, SCp, Ent_Disconnect6 + hostdata->pScript);
+ break;
+ case Ent_Disconnect7:
+ case Ent_Disconnect8:
+ save_for_reselection(hostdata, SCp, Ent_Disconnect8 + hostdata->pScript);
+ break;
+ case Ent_Finish1:
+ case Ent_Finish2:
+ process_script_interrupt(A_GOOD_STATUS_AFTER_STATUS, dsp, SCp, host, hostdata);
+ break;
+
+ default:
+ slot->state = NCR_700_SLOT_QUEUED;
+ break;
+ }
+ }
+ hostdata->state = NCR_700_HOST_BUSY;
+ hostdata->cmd = NULL;
+ /* clear any stale simple tag message */
+ hostdata->msgin[1] = 0;
+ dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE,
+ DMA_BIDIRECTIONAL);
+
+ if(id == 0xff) {
+ /* Selected as target, Ignore */
+ resume_offset = hostdata->pScript + Ent_SelectedAsTarget;
+ } else if(hostdata->tag_negotiated & (1<<id)) {
+ resume_offset = hostdata->pScript + Ent_GetReselectionWithTag;
+ } else {
+ resume_offset = hostdata->pScript + Ent_GetReselectionData;
+ }
+ return resume_offset;
+}
+
+static inline void
+NCR_700_clear_fifo(struct Scsi_Host *host) {
+ const struct NCR_700_Host_Parameters *hostdata
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+ if(hostdata->chip710) {
+ NCR_700_writeb(CLR_FIFO_710, host, CTEST8_REG);
+ } else {
+ NCR_700_writeb(CLR_FIFO, host, DFIFO_REG);
+ }
+}
+
+static inline void
+NCR_700_flush_fifo(struct Scsi_Host *host) {
+ const struct NCR_700_Host_Parameters *hostdata
+ = (struct NCR_700_Host_Parameters *)host->hostdata[0];
+ if(hostdata->chip710) {
+ NCR_700_writeb(FLUSH_DMA_FIFO_710, host, CTEST8_REG);
+ udelay(10);
+ NCR_700_writeb(0, host, CTEST8_REG);
+ } else {
+ NCR_700_writeb(FLUSH_DMA_FIFO, host, DFIFO_REG);
+ udelay(10);
+ NCR_700_writeb(0, host, DFIFO_REG);
+ }
+}
+
+
+/* The queue lock with interrupts disabled must be held on entry to
+ * this function */
+STATIC int
+NCR_700_start_command(struct scsi_cmnd *SCp)
+{
+ struct NCR_700_command_slot *slot =
+ (struct NCR_700_command_slot *)SCp->host_scribble;
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
+ __u16 count = 1; /* for IDENTIFY message */
+
+ if(hostdata->state != NCR_700_HOST_FREE) {
+ /* keep this inside the lock to close the race window where
+ * the running command finishes on another CPU while we don't
+ * change the state to queued on this one */
+ slot->state = NCR_700_SLOT_QUEUED;
+
+ DEBUG(("scsi%d: host busy, queueing command %p, slot %p\n",
+ SCp->device->host->host_no, slot->cmnd, slot));
+ return 0;
+ }
+ hostdata->state = NCR_700_HOST_BUSY;
+ hostdata->cmd = SCp;
+ slot->state = NCR_700_SLOT_BUSY;
+ /* keep interrupts disabled until we have the command correctly
+ * set up so we cannot take a selection interrupt */
+
+ hostdata->msgout[0] = NCR_700_identify(SCp->cmnd[0] != REQUEST_SENSE,
+ SCp->device->lun);
+ /* for INQUIRY or REQUEST_SENSE commands, we cannot be sure
+ * if the negotiated transfer parameters still hold, so
+ * always renegotiate them */
+ if(SCp->cmnd[0] == INQUIRY || SCp->cmnd[0] == REQUEST_SENSE) {
+ NCR_700_clear_flag(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC);
+ }
+
+ /* REQUEST_SENSE is asking for contingent I_T_L(_Q) status.
+ * If a contingent allegiance condition exists, the device
+ * will refuse all tags, so send the request sense as untagged
+ * */
+ if((hostdata->tag_negotiated & (1<<SCp->device->id))
+ && (slot->tag != SCSI_NO_TAG && SCp->cmnd[0] != REQUEST_SENSE)) {
+ count += scsi_populate_tag_msg(SCp, &hostdata->msgout[count]);
+ }
+
+ if(hostdata->fast &&
+ NCR_700_is_flag_clear(SCp->device, NCR_700_DEV_NEGOTIATED_SYNC)) {
+ memcpy(&hostdata->msgout[count], NCR_700_SDTR_msg,
+ sizeof(NCR_700_SDTR_msg));
+ hostdata->msgout[count+3] = spi_period(SCp->device->sdev_target);
+ hostdata->msgout[count+4] = spi_offset(SCp->device->sdev_target);
+ count += sizeof(NCR_700_SDTR_msg);
+ NCR_700_set_flag(SCp->device, NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
+ }
+
+ script_patch_16(hostdata->script, MessageCount, count);
+
+
+ script_patch_ID(hostdata->script,
+ Device_ID, 1<<SCp->device->id);
+
+ script_patch_32_abs(hostdata->script, CommandAddress,
+ slot->pCmd);
+ script_patch_16(hostdata->script, CommandCount, SCp->cmd_len);
+ /* finally plumb the beginning of the SG list into the script
+ * */
+ script_patch_32_abs(hostdata->script, SGScriptStartAddress,
+ to32bit(&slot->pSG[0].ins));
+ NCR_700_clear_fifo(SCp->device->host);
+
+ if(slot->resume_offset == 0)
+ slot->resume_offset = hostdata->pScript;
+ /* now perform all the writebacks and invalidates */
+ dma_cache_sync(hostdata->msgout, count, DMA_TO_DEVICE);
+ dma_cache_sync(hostdata->msgin, MSG_ARRAY_SIZE,
+ DMA_FROM_DEVICE);
+ dma_cache_sync(SCp->cmnd, SCp->cmd_len, DMA_TO_DEVICE);
+ dma_cache_sync(hostdata->status, 1, DMA_FROM_DEVICE);
+
+ /* set the synchronous period/offset */
+ NCR_700_writeb(NCR_700_get_SXFER(SCp->device),
+ SCp->device->host, SXFER_REG);
+ NCR_700_writel(slot->temp, SCp->device->host, TEMP_REG);
+ NCR_700_writel(slot->resume_offset, SCp->device->host, DSP_REG);
+
+ return 1;
+}
+
+irqreturn_t
+NCR_700_intr(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct Scsi_Host *host = (struct Scsi_Host *)dev_id;
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)host->hostdata[0];
+ __u8 istat;
+ __u32 resume_offset = 0;
+ __u8 pun = 0xff, lun = 0xff;
+ unsigned long flags;
+ int handled = 0;
+
+ /* Use the host lock to serialise acess to the 53c700
+ * hardware. Note: In future, we may need to take the queue
+ * lock to enter the done routines. When that happens, we
+ * need to ensure that for this driver, the host lock and the
+ * queue lock point to the same thing. */
+ spin_lock_irqsave(host->host_lock, flags);
+ if((istat = NCR_700_readb(host, ISTAT_REG))
+ & (SCSI_INT_PENDING | DMA_INT_PENDING)) {
+ __u32 dsps;
+ __u8 sstat0 = 0, dstat = 0;
+ __u32 dsp;
+ struct scsi_cmnd *SCp = hostdata->cmd;
+ enum NCR_700_Host_State state;
+
+ handled = 1;
+ state = hostdata->state;
+ SCp = hostdata->cmd;
+
+ if(istat & SCSI_INT_PENDING) {
+ udelay(10);
+
+ sstat0 = NCR_700_readb(host, SSTAT0_REG);
+ }
+
+ if(istat & DMA_INT_PENDING) {
+ udelay(10);
+
+ dstat = NCR_700_readb(host, DSTAT_REG);
+ }
+
+ dsps = NCR_700_readl(host, DSPS_REG);
+ dsp = NCR_700_readl(host, DSP_REG);
+
+ DEBUG(("scsi%d: istat %02x sstat0 %02x dstat %02x dsp %04x[%08x] dsps 0x%x\n",
+ host->host_no, istat, sstat0, dstat,
+ (dsp - (__u32)(hostdata->pScript))/4,
+ dsp, dsps));
+
+ if(SCp != NULL) {
+ pun = SCp->device->id;
+ lun = SCp->device->lun;
+ }
+
+ if(sstat0 & SCSI_RESET_DETECTED) {
+ struct scsi_device *SDp;
+ int i;
+
+ hostdata->state = NCR_700_HOST_BUSY;
+
+ printk(KERN_ERR "scsi%d: Bus Reset detected, executing command %p, slot %p, dsp %08x[%04x]\n",
+ host->host_no, SCp, SCp == NULL ? NULL : SCp->host_scribble, dsp, dsp - hostdata->pScript);
+
+ scsi_report_bus_reset(host, 0);
+
+ /* clear all the negotiated parameters */
+ __shost_for_each_device(SDp, host)
+ SDp->hostdata = NULL;
+
+ /* clear all the slots and their pending commands */
+ for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
+ struct scsi_cmnd *SCp;
+ struct NCR_700_command_slot *slot =
+ &hostdata->slots[i];
+
+ if(slot->state == NCR_700_SLOT_FREE)
+ continue;
+
+ SCp = slot->cmnd;
+ printk(KERN_ERR " failing command because of reset, slot %p, cmnd %p\n",
+ slot, SCp);
+ free_slot(slot, hostdata);
+ SCp->host_scribble = NULL;
+ NCR_700_set_depth(SCp->device, 0);
+ /* NOTE: deadlock potential here: we
+ * rely on mid-layer guarantees that
+ * scsi_done won't try to issue the
+ * command again otherwise we'll
+ * deadlock on the
+ * hostdata->state_lock */
+ SCp->result = DID_RESET << 16;
+ SCp->scsi_done(SCp);
+ }
+ mdelay(25);
+ NCR_700_chip_setup(host);
+
+ hostdata->state = NCR_700_HOST_FREE;
+ hostdata->cmd = NULL;
+ /* signal back if this was an eh induced reset */
+ if(hostdata->eh_complete != NULL)
+ complete(hostdata->eh_complete);
+ goto out_unlock;
+ } else if(sstat0 & SELECTION_TIMEOUT) {
+ DEBUG(("scsi%d: (%d:%d) selection timeout\n",
+ host->host_no, pun, lun));
+ NCR_700_scsi_done(hostdata, SCp, DID_NO_CONNECT<<16);
+ } else if(sstat0 & PHASE_MISMATCH) {
+ struct NCR_700_command_slot *slot = (SCp == NULL) ? NULL :
+ (struct NCR_700_command_slot *)SCp->host_scribble;
+
+ if(dsp == Ent_SendMessage + 8 + hostdata->pScript) {
+ /* It wants to reply to some part of
+ * our message */
+#ifdef NCR_700_DEBUG
+ __u32 temp = NCR_700_readl(host, TEMP_REG);
+ int count = (hostdata->script[Ent_SendMessage/4] & 0xffffff) - ((NCR_700_readl(host, DBC_REG) & 0xffffff) + NCR_700_data_residual(host));
+ printk("scsi%d (%d:%d) PHASE MISMATCH IN SEND MESSAGE %d remain, return %p[%04x], phase %s\n", host->host_no, pun, lun, count, (void *)temp, temp - hostdata->pScript, sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
+#endif
+ resume_offset = hostdata->pScript + Ent_SendMessagePhaseMismatch;
+ } else if(dsp >= to32bit(&slot->pSG[0].ins) &&
+ dsp <= to32bit(&slot->pSG[NCR_700_SG_SEGMENTS].ins)) {
+ int data_transfer = NCR_700_readl(host, DBC_REG) & 0xffffff;
+ int SGcount = (dsp - to32bit(&slot->pSG[0].ins))/sizeof(struct NCR_700_SG_List);
+ int residual = NCR_700_data_residual(host);
+ int i;
+#ifdef NCR_700_DEBUG
+ __u32 naddr = NCR_700_readl(host, DNAD_REG);
+
+ printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x\n",
+ host->host_no, pun, lun,
+ SGcount, data_transfer);
+ scsi_print_command(SCp);
+ if(residual) {
+ printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x, residual %d\n",
+ host->host_no, pun, lun,
+ SGcount, data_transfer, residual);
+ }
+#endif
+ data_transfer += residual;
+
+ if(data_transfer != 0) {
+ int count;
+ __u32 pAddr;
+
+ SGcount--;
+
+ count = (bS_to_cpu(slot->SG[SGcount].ins) & 0x00ffffff);
+ DEBUG(("DATA TRANSFER MISMATCH, count = %d, transferred %d\n", count, count-data_transfer));
+ slot->SG[SGcount].ins &= bS_to_host(0xff000000);
+ slot->SG[SGcount].ins |= bS_to_host(data_transfer);
+ pAddr = bS_to_cpu(slot->SG[SGcount].pAddr);
+ pAddr += (count - data_transfer);
+#ifdef NCR_700_DEBUG
+ if(pAddr != naddr) {
+ printk("scsi%d (%d:%d) transfer mismatch pAddr=%lx, naddr=%lx, data_transfer=%d, residual=%d\n", host->host_no, pun, lun, (unsigned long)pAddr, (unsigned long)naddr, data_transfer, residual);
+ }
+#endif
+ slot->SG[SGcount].pAddr = bS_to_host(pAddr);
+ }
+ /* set the executed moves to nops */
+ for(i=0; i<SGcount; i++) {
+ slot->SG[i].ins = bS_to_host(SCRIPT_NOP);
+ slot->SG[i].pAddr = 0;
+ }
+ dma_cache_sync(slot->SG, sizeof(slot->SG), DMA_TO_DEVICE);
+ /* and pretend we disconnected after
+ * the command phase */
+ resume_offset = hostdata->pScript + Ent_MsgInDuringData;
+ /* make sure all the data is flushed */
+ NCR_700_flush_fifo(host);
+ } else {
+ __u8 sbcl = NCR_700_readb(host, SBCL_REG);
+ printk(KERN_ERR "scsi%d: (%d:%d) phase mismatch at %04x, phase %s\n",
+ host->host_no, pun, lun, dsp - hostdata->pScript, sbcl_to_string(sbcl));
+ NCR_700_internal_bus_reset(host);
+ }
+
+ } else if(sstat0 & SCSI_GROSS_ERROR) {
+ printk(KERN_ERR "scsi%d: (%d:%d) GROSS ERROR\n",
+ host->host_no, pun, lun);
+ NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
+ } else if(sstat0 & PARITY_ERROR) {
+ printk(KERN_ERR "scsi%d: (%d:%d) PARITY ERROR\n",
+ host->host_no, pun, lun);
+ NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
+ } else if(dstat & SCRIPT_INT_RECEIVED) {
+ DEBUG(("scsi%d: (%d:%d) ====>SCRIPT INTERRUPT<====\n",
+ host->host_no, pun, lun));
+ resume_offset = process_script_interrupt(dsps, dsp, SCp, host, hostdata);
+ } else if(dstat & (ILGL_INST_DETECTED)) {
+ printk(KERN_ERR "scsi%d: (%d:%d) Illegal Instruction detected at 0x%08x[0x%x]!!!\n"
+ " Please email James.Bottomley@HansenPartnership.com with the details\n",
+ host->host_no, pun, lun,
+ dsp, dsp - hostdata->pScript);
+ NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
+ } else if(dstat & (WATCH_DOG_INTERRUPT|ABORTED)) {
+ printk(KERN_ERR "scsi%d: (%d:%d) serious DMA problem, dstat=%02x\n",
+ host->host_no, pun, lun, dstat);
+ NCR_700_scsi_done(hostdata, SCp, DID_ERROR<<16);
+ }
+
+
+ /* NOTE: selection interrupt processing MUST occur
+ * after script interrupt processing to correctly cope
+ * with the case where we process a disconnect and
+ * then get reselected before we process the
+ * disconnection */
+ if(sstat0 & SELECTED) {
+ /* FIXME: It currently takes at least FOUR
+ * interrupts to complete a command that
+ * disconnects: one for the disconnect, one
+ * for the reselection, one to get the
+ * reselection data and one to complete the
+ * command. If we guess the reselected
+ * command here and prepare it, we only need
+ * to get a reselection data interrupt if we
+ * guessed wrongly. Since the interrupt
+ * overhead is much greater than the command
+ * setup, this would be an efficient
+ * optimisation particularly as we probably
+ * only have one outstanding command on a
+ * target most of the time */
+
+ resume_offset = process_selection(host, dsp);
+
+ }
+
+ }
+
+ if(resume_offset) {
+ if(hostdata->state != NCR_700_HOST_BUSY) {
+ printk(KERN_ERR "scsi%d: Driver error: resume at 0x%08x [0x%04x] with non busy host!\n",
+ host->host_no, resume_offset, resume_offset - hostdata->pScript);
+ hostdata->state = NCR_700_HOST_BUSY;
+ }
+
+ DEBUG(("Attempting to resume at %x\n", resume_offset));
+ NCR_700_clear_fifo(host);
+ NCR_700_writel(resume_offset, host, DSP_REG);
+ }
+ /* There is probably a technical no-no about this: If we're a
+ * shared interrupt and we got this interrupt because the
+ * other device needs servicing not us, we're still going to
+ * check our queued commands here---of course, there shouldn't
+ * be any outstanding.... */
+ if(hostdata->state == NCR_700_HOST_FREE) {
+ int i;
+
+ for(i = 0; i < NCR_700_COMMAND_SLOTS_PER_HOST; i++) {
+ /* fairness: always run the queue from the last
+ * position we left off */
+ int j = (i + hostdata->saved_slot_position)
+ % NCR_700_COMMAND_SLOTS_PER_HOST;
+
+ if(hostdata->slots[j].state != NCR_700_SLOT_QUEUED)
+ continue;
+ if(NCR_700_start_command(hostdata->slots[j].cmnd)) {
+ DEBUG(("scsi%d: Issuing saved command slot %p, cmd %p\t\n",
+ host->host_no, &hostdata->slots[j],
+ hostdata->slots[j].cmnd));
+ hostdata->saved_slot_position = j + 1;
+ }
+
+ break;
+ }
+ }
+ out_unlock:
+ spin_unlock_irqrestore(host->host_lock, flags);
+ return IRQ_RETVAL(handled);
+}
+
+STATIC int
+NCR_700_queuecommand(struct scsi_cmnd *SCp, void (*done)(struct scsi_cmnd *))
+{
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
+ __u32 move_ins;
+ enum dma_data_direction direction;
+ struct NCR_700_command_slot *slot;
+
+ if(hostdata->command_slot_count >= NCR_700_COMMAND_SLOTS_PER_HOST) {
+ /* We're over our allocation, this should never happen
+ * since we report the max allocation to the mid layer */
+ printk(KERN_WARNING "scsi%d: Command depth has gone over queue depth\n", SCp->device->host->host_no);
+ return 1;
+ }
+ /* check for untagged commands. We cannot have any outstanding
+ * commands if we accept them. Commands could be untagged because:
+ *
+ * - The tag negotiated bitmap is clear
+ * - The blk layer sent and untagged command
+ */
+ if(NCR_700_get_depth(SCp->device) != 0
+ && (!(hostdata->tag_negotiated & (1<<SCp->device->id))
+ || !blk_rq_tagged(SCp->request))) {
+ DEBUG((KERN_ERR "scsi%d (%d:%d) has non zero depth %d\n",
+ SCp->device->host->host_no, SCp->device->id, SCp->device->lun,
+ NCR_700_get_depth(SCp->device)));
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+ if(NCR_700_get_depth(SCp->device) >= SCp->device->queue_depth) {
+ DEBUG((KERN_ERR "scsi%d (%d:%d) has max tag depth %d\n",
+ SCp->device->host->host_no, SCp->device->id, SCp->device->lun,
+ NCR_700_get_depth(SCp->device)));
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+ NCR_700_set_depth(SCp->device, NCR_700_get_depth(SCp->device) + 1);
+
+ /* begin the command here */
+ /* no need to check for NULL, test for command_slot_count above
+ * ensures a slot is free */
+ slot = find_empty_slot(hostdata);
+
+ slot->cmnd = SCp;
+
+ SCp->scsi_done = done;
+ SCp->host_scribble = (unsigned char *)slot;
+ SCp->SCp.ptr = NULL;
+ SCp->SCp.buffer = NULL;
+
+#ifdef NCR_700_DEBUG
+ printk("53c700: scsi%d, command ", SCp->device->host->host_no);
+ scsi_print_command(SCp);
+#endif
+ if(blk_rq_tagged(SCp->request)
+ && (hostdata->tag_negotiated &(1<<SCp->device->id)) == 0
+ && NCR_700_get_tag_neg_state(SCp->device) == NCR_700_START_TAG_NEGOTIATION) {
+ printk(KERN_ERR "scsi%d: (%d:%d) Enabling Tag Command Queuing\n", SCp->device->host->host_no, SCp->device->id, SCp->device->lun);
+ hostdata->tag_negotiated |= (1<<SCp->device->id);
+ NCR_700_set_tag_neg_state(SCp->device, NCR_700_DURING_TAG_NEGOTIATION);
+ }
+
+ /* here we may have to process an untagged command. The gate
+ * above ensures that this will be the only one outstanding,
+ * so clear the tag negotiated bit.
+ *
+ * FIXME: This will royally screw up on multiple LUN devices
+ * */
+ if(!blk_rq_tagged(SCp->request)
+ && (hostdata->tag_negotiated &(1<<SCp->device->id))) {
+ printk(KERN_INFO "scsi%d: (%d:%d) Disabling Tag Command Queuing\n", SCp->device->host->host_no, SCp->device->id, SCp->device->lun);
+ hostdata->tag_negotiated &= ~(1<<SCp->device->id);
+ }
+
+ if((hostdata->tag_negotiated &(1<<SCp->device->id))
+ && scsi_get_tag_type(SCp->device)) {
+ slot->tag = SCp->request->tag;
+ DEBUG(("53c700 %d:%d:%d, sending out tag %d, slot %p\n",
+ SCp->device->host->host_no, SCp->device->id, SCp->device->lun, slot->tag,
+ slot));
+ } else {
+ slot->tag = SCSI_NO_TAG;
+ /* must populate current_cmnd for scsi_find_tag to work */
+ SCp->device->current_cmnd = SCp;
+ }
+ /* sanity check: some of the commands generated by the mid-layer
+ * have an eccentric idea of their sc_data_direction */
+ if(!SCp->use_sg && !SCp->request_bufflen
+ && SCp->sc_data_direction != DMA_NONE) {
+#ifdef NCR_700_DEBUG
+ printk("53c700: Command");
+ scsi_print_command(SCp);
+ printk("Has wrong data direction %d\n", SCp->sc_data_direction);
+#endif
+ SCp->sc_data_direction = DMA_NONE;
+ }
+
+ switch (SCp->cmnd[0]) {
+ case REQUEST_SENSE:
+ /* clear the internal sense magic */
+ SCp->cmnd[6] = 0;
+ /* fall through */
+ default:
+ /* OK, get it from the command */
+ switch(SCp->sc_data_direction) {
+ case DMA_BIDIRECTIONAL:
+ default:
+ printk(KERN_ERR "53c700: Unknown command for data direction ");
+ scsi_print_command(SCp);
+
+ move_ins = 0;
+ break;
+ case DMA_NONE:
+ move_ins = 0;
+ break;
+ case DMA_FROM_DEVICE:
+ move_ins = SCRIPT_MOVE_DATA_IN;
+ break;
+ case DMA_TO_DEVICE:
+ move_ins = SCRIPT_MOVE_DATA_OUT;
+ break;
+ }
+ }
+
+ /* now build the scatter gather list */
+ direction = SCp->sc_data_direction;
+ if(move_ins != 0) {
+ int i;
+ int sg_count;
+ dma_addr_t vPtr = 0;
+ __u32 count = 0;
+
+ if(SCp->use_sg) {
+ sg_count = dma_map_sg(hostdata->dev, SCp->buffer,
+ SCp->use_sg, direction);
+ } else {
+ vPtr = dma_map_single(hostdata->dev,
+ SCp->request_buffer,
+ SCp->request_bufflen,
+ direction);
+ count = SCp->request_bufflen;
+ slot->dma_handle = vPtr;
+ sg_count = 1;
+ }
+
+
+ for(i = 0; i < sg_count; i++) {
+
+ if(SCp->use_sg) {
+ struct scatterlist *sg = SCp->buffer;
+
+ vPtr = sg_dma_address(&sg[i]);
+ count = sg_dma_len(&sg[i]);
+ }
+
+ slot->SG[i].ins = bS_to_host(move_ins | count);
+ DEBUG((" scatter block %d: move %d[%08x] from 0x%lx\n",
+ i, count, slot->SG[i].ins, (unsigned long)vPtr));
+ slot->SG[i].pAddr = bS_to_host(vPtr);
+ }
+ slot->SG[i].ins = bS_to_host(SCRIPT_RETURN);
+ slot->SG[i].pAddr = 0;
+ dma_cache_sync(slot->SG, sizeof(slot->SG), DMA_TO_DEVICE);
+ DEBUG((" SETTING %08lx to %x\n",
+ (&slot->pSG[i].ins),
+ slot->SG[i].ins));
+ }
+ slot->resume_offset = 0;
+ slot->pCmd = dma_map_single(hostdata->dev, SCp->cmnd,
+ sizeof(SCp->cmnd), DMA_TO_DEVICE);
+ NCR_700_start_command(SCp);
+ return 0;
+}
+
+STATIC int
+NCR_700_abort(struct scsi_cmnd * SCp)
+{
+ struct NCR_700_command_slot *slot;
+
+ printk(KERN_INFO "scsi%d (%d:%d) New error handler wants to abort command\n\t",
+ SCp->device->host->host_no, SCp->device->id, SCp->device->lun);
+ scsi_print_command(SCp);
+
+ slot = (struct NCR_700_command_slot *)SCp->host_scribble;
+
+ if(slot == NULL)
+ /* no outstanding command to abort */
+ return SUCCESS;
+ if(SCp->cmnd[0] == TEST_UNIT_READY) {
+ /* FIXME: This is because of a problem in the new
+ * error handler. When it is in error recovery, it
+ * will send a TUR to a device it thinks may still be
+ * showing a problem. If the TUR isn't responded to,
+ * it will abort it and mark the device off line.
+ * Unfortunately, it does no other error recovery, so
+ * this would leave us with an outstanding command
+ * occupying a slot. Rather than allow this to
+ * happen, we issue a bus reset to force all
+ * outstanding commands to terminate here. */
+ NCR_700_internal_bus_reset(SCp->device->host);
+ /* still drop through and return failed */
+ }
+ return FAILED;
+
+}
+
+STATIC int
+NCR_700_bus_reset(struct scsi_cmnd * SCp)
+{
+ DECLARE_COMPLETION(complete);
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)SCp->device->host->hostdata[0];
+
+ printk(KERN_INFO "scsi%d (%d:%d) New error handler wants BUS reset, cmd %p\n\t",
+ SCp->device->host->host_no, SCp->device->id, SCp->device->lun, SCp);
+ scsi_print_command(SCp);
+ /* In theory, eh_complete should always be null because the
+ * eh is single threaded, but just in case we're handling a
+ * reset via sg or something */
+ while(hostdata->eh_complete != NULL) {
+ spin_unlock_irq(SCp->device->host->host_lock);
+ msleep_interruptible(100);
+ spin_lock_irq(SCp->device->host->host_lock);
+ }
+ hostdata->eh_complete = &complete;
+ NCR_700_internal_bus_reset(SCp->device->host);
+ spin_unlock_irq(SCp->device->host->host_lock);
+ wait_for_completion(&complete);
+ spin_lock_irq(SCp->device->host->host_lock);
+ hostdata->eh_complete = NULL;
+ /* Revalidate the transport parameters of the failing device */
+ if(hostdata->fast)
+ spi_schedule_dv_device(SCp->device);
+ return SUCCESS;
+}
+
+STATIC int
+NCR_700_dev_reset(struct scsi_cmnd * SCp)
+{
+ printk(KERN_INFO "scsi%d (%d:%d) New error handler wants device reset\n\t",
+ SCp->device->host->host_no, SCp->device->id, SCp->device->lun);
+ scsi_print_command(SCp);
+
+ return FAILED;
+}
+
+STATIC int
+NCR_700_host_reset(struct scsi_cmnd * SCp)
+{
+ printk(KERN_INFO "scsi%d (%d:%d) New error handler wants HOST reset\n\t",
+ SCp->device->host->host_no, SCp->device->id, SCp->device->lun);
+ scsi_print_command(SCp);
+
+ NCR_700_internal_bus_reset(SCp->device->host);
+ NCR_700_chip_reset(SCp->device->host);
+ return SUCCESS;
+}
+
+STATIC void
+NCR_700_set_period(struct scsi_target *STp, int period)
+{
+ struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent);
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)SHp->hostdata[0];
+
+ if(!hostdata->fast)
+ return;
+
+ if(period < hostdata->min_period)
+ period = hostdata->min_period;
+
+ spi_period(STp) = period;
+ spi_flags(STp) &= ~(NCR_700_DEV_NEGOTIATED_SYNC |
+ NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
+ spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION;
+}
+
+STATIC void
+NCR_700_set_offset(struct scsi_target *STp, int offset)
+{
+ struct Scsi_Host *SHp = dev_to_shost(STp->dev.parent);
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)SHp->hostdata[0];
+ int max_offset = hostdata->chip710
+ ? NCR_710_MAX_OFFSET : NCR_700_MAX_OFFSET;
+
+ if(!hostdata->fast)
+ return;
+
+ if(offset > max_offset)
+ offset = max_offset;
+
+ /* if we're currently async, make sure the period is reasonable */
+ if(spi_offset(STp) == 0 && (spi_period(STp) < hostdata->min_period ||
+ spi_period(STp) > 0xff))
+ spi_period(STp) = hostdata->min_period;
+
+ spi_offset(STp) = offset;
+ spi_flags(STp) &= ~(NCR_700_DEV_NEGOTIATED_SYNC |
+ NCR_700_DEV_BEGIN_SYNC_NEGOTIATION);
+ spi_flags(STp) |= NCR_700_DEV_PRINT_SYNC_NEGOTIATION;
+}
+
+
+
+STATIC int
+NCR_700_slave_configure(struct scsi_device *SDp)
+{
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
+
+ /* to do here: allocate memory; build a queue_full list */
+ if(SDp->tagged_supported) {
+ scsi_set_tag_type(SDp, MSG_ORDERED_TAG);
+ scsi_activate_tcq(SDp, NCR_700_DEFAULT_TAGS);
+ NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION);
+ } else {
+ /* initialise to default depth */
+ scsi_adjust_queue_depth(SDp, 0, SDp->host->cmd_per_lun);
+ }
+ if(hostdata->fast) {
+ /* Find the correct offset and period via domain validation */
+ if (!spi_initial_dv(SDp->sdev_target))
+ spi_dv_device(SDp);
+ } else {
+ spi_offset(SDp->sdev_target) = 0;
+ spi_period(SDp->sdev_target) = 0;
+ }
+ return 0;
+}
+
+STATIC void
+NCR_700_slave_destroy(struct scsi_device *SDp)
+{
+ /* to do here: deallocate memory */
+}
+
+static int
+NCR_700_change_queue_depth(struct scsi_device *SDp, int depth)
+{
+ if (depth > NCR_700_MAX_TAGS)
+ depth = NCR_700_MAX_TAGS;
+
+ scsi_adjust_queue_depth(SDp, scsi_get_tag_type(SDp), depth);
+ return depth;
+}
+
+static int NCR_700_change_queue_type(struct scsi_device *SDp, int tag_type)
+{
+ int change_tag = ((tag_type ==0 && scsi_get_tag_type(SDp) != 0)
+ || (tag_type != 0 && scsi_get_tag_type(SDp) == 0));
+ struct NCR_700_Host_Parameters *hostdata =
+ (struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
+
+ scsi_set_tag_type(SDp, tag_type);
+
+ /* We have a global (per target) flag to track whether TCQ is
+ * enabled, so we'll be turning it off for the entire target here.
+ * our tag algorithm will fail if we mix tagged and untagged commands,
+ * so quiesce the device before doing this */
+ if (change_tag)
+ scsi_target_quiesce(SDp->sdev_target);
+
+ if (!tag_type) {
+ /* shift back to the default unqueued number of commands
+ * (the user can still raise this) */
+ scsi_deactivate_tcq(SDp, SDp->host->cmd_per_lun);
+ hostdata->tag_negotiated &= ~(1 << SDp->id);
+ } else {
+ /* Here, we cleared the negotiation flag above, so this
+ * will force the driver to renegotiate */
+ scsi_activate_tcq(SDp, SDp->queue_depth);
+ if (change_tag)
+ NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION);
+ }
+ if (change_tag)
+ scsi_target_resume(SDp->sdev_target);
+
+ return tag_type;
+}
+
+static ssize_t
+NCR_700_show_active_tags(struct device *dev, char *buf)
+{
+ struct scsi_device *SDp = to_scsi_device(dev);
+
+ return snprintf(buf, 20, "%d\n", NCR_700_get_depth(SDp));
+}
+
+static struct device_attribute NCR_700_active_tags_attr = {
+ .attr = {
+ .name = "active_tags",
+ .mode = S_IRUGO,
+ },
+ .show = NCR_700_show_active_tags,
+};
+
+STATIC struct device_attribute *NCR_700_dev_attrs[] = {
+ &NCR_700_active_tags_attr,
+ NULL,
+};
+
+EXPORT_SYMBOL(NCR_700_detect);
+EXPORT_SYMBOL(NCR_700_release);
+EXPORT_SYMBOL(NCR_700_intr);
+
+static struct spi_function_template NCR_700_transport_functions = {
+ .set_period = NCR_700_set_period,
+ .show_period = 1,
+ .set_offset = NCR_700_set_offset,
+ .show_offset = 1,
+};
+
+static int __init NCR_700_init(void)
+{
+ NCR_700_transport_template = spi_attach_transport(&NCR_700_transport_functions);
+ if(!NCR_700_transport_template)
+ return -ENODEV;
+ return 0;
+}
+
+static void __exit NCR_700_exit(void)
+{
+ spi_release_transport(NCR_700_transport_template);
+}
+
+module_init(NCR_700_init);
+module_exit(NCR_700_exit);
+