diff options
Diffstat (limited to 'drivers/scsi/Kconfig')
| -rw-r--r-- | drivers/scsi/Kconfig | 56 |
1 files changed, 32 insertions, 24 deletions
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index eb46cb0e3cb7..9d2119b53ac9 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -10,6 +10,7 @@ config RAID_ATTRS config SCSI tristate "SCSI device support" depends on BLOCK + select SCSI_DMA if HAS_DMA ---help--- If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or any other SCSI device under Linux, say Y and make sure that you know @@ -29,6 +30,10 @@ config SCSI However, do not compile this as a module if your root file system (the one containing the directory /) is located on a SCSI device. +config SCSI_DMA + bool + default n + config SCSI_TGT tristate "SCSI target support" depends on SCSI && EXPERIMENTAL @@ -739,7 +744,7 @@ config SCSI_GENERIC_NCR53C400 config SCSI_IBMMCA tristate "IBMMCA SCSI support" - depends on MCA_LEGACY && SCSI + depends on MCA && SCSI ---help--- This is support for the IBM SCSI adapter found in many of the PS/2 series computers. These machines have an MCA bus, so you need to @@ -1007,6 +1012,11 @@ config SCSI_STEX To compile this driver as a module, choose M here: the module will be called stex. +config 53C700_BE_BUS + bool + depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI + default y + config SCSI_SYM53C8XX_2 tristate "SYM53C8XX Version 2 SCSI support" depends on PCI && SCSI @@ -1611,13 +1621,25 @@ config FASTLANE_SCSI If you have the Phase5 Fastlane Z3 SCSI controller, or plan to use one in the near future, say Y to this question. Otherwise, say N. -config SCSI_AMIGA7XX - bool "Amiga NCR53c710 SCSI support (EXPERIMENTAL)" - depends on AMIGA && SCSI && EXPERIMENTAL && BROKEN +config SCSI_A4000T + tristate "A4000T NCR53c710 SCSI support (EXPERIMENTAL)" + depends on AMIGA && SCSI && EXPERIMENTAL + select SCSI_SPI_ATTRS help - Support for various NCR53c710-based SCSI controllers on the Amiga. + If you have an Amiga 4000T and have SCSI devices connected to the + built-in SCSI controller, say Y. Otherwise, say N. + + To compile this driver as a module, choose M here: the + module will be called a4000t. + +config SCSI_ZORRO7XX + tristate "Zorro NCR53c710 SCSI support (EXPERIMENTAL)" + depends on ZORRO && SCSI && EXPERIMENTAL + select SCSI_SPI_ATTRS + help + Support for various NCR53c710-based SCSI controllers on Zorro + expansion boards for the Amiga. This includes: - - the builtin SCSI controller on the Amiga 4000T, - the Amiga 4091 Zorro III SCSI-2 controller, - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller (info at @@ -1625,10 +1647,6 @@ config SCSI_AMIGA7XX - the SCSI controller on the Phase5 Blizzard PowerUP 603e+ accelerator card for the Amiga 1200, - the SCSI controller on the GVP Turbo 040/060 accelerator. - Note that all of the above SCSI controllers, except for the builtin - SCSI controller on the Amiga 4000T, reside on the Zorro expansion - bus, so you also have to enable Zorro bus support if you want to use - them. config OKTAGON_SCSI tristate "BSC Oktagon SCSI support (EXPERIMENTAL)" @@ -1712,8 +1730,8 @@ config MVME147_SCSI single-board computer. config MVME16x_SCSI - bool "NCR53C710 SCSI driver for MVME16x" - depends on MVME16x && SCSI && BROKEN + tristate "NCR53C710 SCSI driver for MVME16x" + depends on MVME16x && SCSI select SCSI_SPI_ATTRS help The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 @@ -1721,22 +1739,14 @@ config MVME16x_SCSI will want to say Y to this question. config BVME6000_SCSI - bool "NCR53C710 SCSI driver for BVME6000" - depends on BVME6000 && SCSI && BROKEN + tristate "NCR53C710 SCSI driver for BVME6000" + depends on BVME6000 && SCSI select SCSI_SPI_ATTRS help The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 SCSI controller chip. Almost everyone using one of these boards will want to say Y to this question. -config SCSI_NCR53C7xx_FAST - bool "allow FAST-SCSI [10MHz]" - depends on SCSI_AMIGA7XX || MVME16x_SCSI || BVME6000_SCSI - help - This will enable 10MHz FAST-SCSI transfers with your host - adapter. Some systems have problems with that speed, so it's safest - to say N here. - config SUN3_SCSI tristate "Sun3 NCR5380 SCSI" depends on SUN3 && SCSI @@ -1766,8 +1776,6 @@ config SCSI_SUNESP To compile this driver as a module, choose M here: the module will be called esp. -# bool 'Cyberstorm Mk III SCSI support (EXPERIMENTAL)' CONFIG_CYBERSTORMIII_SCSI - config ZFCP tristate "FCP host bus adapter driver for IBM eServer zSeries" depends on S390 && QDIO && SCSI |