summaryrefslogtreecommitdiff
path: root/drivers/scsi/aacraid/linit.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/aacraid/linit.c')
-rw-r--r--drivers/scsi/aacraid/linit.c749
1 files changed, 749 insertions, 0 deletions
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
new file mode 100644
index 000000000000..c9b82687ba1a
--- /dev/null
+++ b/drivers/scsi/aacraid/linit.c
@@ -0,0 +1,749 @@
+/*
+ * Adaptec AAC series RAID controller driver
+ * (c) Copyright 2001 Red Hat Inc. <alan@redhat.com>
+ *
+ * based on the old aacraid driver that is..
+ * Adaptec aacraid device driver for Linux.
+ *
+ * Copyright (c) 2000 Adaptec, Inc. (aacraid@adaptec.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; see the file COPYING. If not, write to
+ * the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Module Name:
+ * linit.c
+ *
+ * Abstract: Linux Driver entry module for Adaptec RAID Array Controller
+ */
+
+#define AAC_DRIVER_VERSION "1.1.2-lk2"
+#define AAC_DRIVER_BUILD_DATE __DATE__
+#define AAC_DRIVERNAME "aacraid"
+
+#include <linux/compat.h>
+#include <linux/blkdev.h>
+#include <linux/completion.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+#include <linux/syscalls.h>
+#include <linux/ioctl32.h>
+#include <linux/delay.h>
+#include <linux/smp_lock.h>
+#include <asm/semaphore.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/scsicam.h>
+#include <scsi/scsi_eh.h>
+
+#include "aacraid.h"
+
+
+MODULE_AUTHOR("Red Hat Inc and Adaptec");
+MODULE_DESCRIPTION("Dell PERC2, 2/Si, 3/Si, 3/Di, "
+ "Adaptec Advanced Raid Products, "
+ "and HP NetRAID-4M SCSI driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(AAC_DRIVER_VERSION);
+
+static LIST_HEAD(aac_devices);
+static int aac_cfg_major = -1;
+
+/*
+ * Because of the way Linux names scsi devices, the order in this table has
+ * become important. Check for on-board Raid first, add-in cards second.
+ *
+ * Note: The last field is used to index into aac_drivers below.
+ */
+static struct pci_device_id aac_pci_tbl[] = {
+ { 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */
+ { 0x1028, 0x0002, 0x1028, 0x0002, 0, 0, 1 }, /* PERC 3/Di (Opal/PERC3Di) */
+ { 0x1028, 0x0003, 0x1028, 0x0003, 0, 0, 2 }, /* PERC 3/Si (SlimFast/PERC3Si */
+ { 0x1028, 0x0004, 0x1028, 0x00d0, 0, 0, 3 }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
+ { 0x1028, 0x0002, 0x1028, 0x00d1, 0, 0, 4 }, /* PERC 3/Di (Viper/PERC3DiV) */
+ { 0x1028, 0x0002, 0x1028, 0x00d9, 0, 0, 5 }, /* PERC 3/Di (Lexus/PERC3DiL) */
+ { 0x1028, 0x000a, 0x1028, 0x0106, 0, 0, 6 }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
+ { 0x1028, 0x000a, 0x1028, 0x011b, 0, 0, 7 }, /* PERC 3/Di (Dagger/PERC3DiD) */
+ { 0x1028, 0x000a, 0x1028, 0x0121, 0, 0, 8 }, /* PERC 3/Di (Boxster/PERC3DiB) */
+ { 0x9005, 0x0283, 0x9005, 0x0283, 0, 0, 9 }, /* catapult */
+ { 0x9005, 0x0284, 0x9005, 0x0284, 0, 0, 10 }, /* tomcat */
+ { 0x9005, 0x0285, 0x9005, 0x0286, 0, 0, 11 }, /* Adaptec 2120S (Crusader) */
+ { 0x9005, 0x0285, 0x9005, 0x0285, 0, 0, 12 }, /* Adaptec 2200S (Vulcan) */
+ { 0x9005, 0x0285, 0x9005, 0x0287, 0, 0, 13 }, /* Adaptec 2200S (Vulcan-2m) */
+ { 0x9005, 0x0285, 0x17aa, 0x0286, 0, 0, 14 }, /* Legend S220 (Legend Crusader) */
+ { 0x9005, 0x0285, 0x17aa, 0x0287, 0, 0, 15 }, /* Legend S230 (Legend Vulcan) */
+
+ { 0x9005, 0x0285, 0x9005, 0x0288, 0, 0, 16 }, /* Adaptec 3230S (Harrier) */
+ { 0x9005, 0x0285, 0x9005, 0x0289, 0, 0, 17 }, /* Adaptec 3240S (Tornado) */
+ { 0x9005, 0x0285, 0x9005, 0x028a, 0, 0, 18 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
+ { 0x9005, 0x0285, 0x9005, 0x028b, 0, 0, 19 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
+ { 0x9005, 0x0286, 0x9005, 0x028c, 0, 0, 20 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x028d, 0, 0, 21 }, /* ASR-2130S (Lancer) */
+ { 0x9005, 0x0286, 0x9005, 0x029b, 0, 0, 22 }, /* AAR-2820SA (Intruder) */
+ { 0x9005, 0x0286, 0x9005, 0x029c, 0, 0, 23 }, /* AAR-2620SA (Intruder) */
+ { 0x9005, 0x0286, 0x9005, 0x029d, 0, 0, 24 }, /* AAR-2420SA (Intruder) */
+ { 0x9005, 0x0286, 0x9005, 0x0800, 0, 0, 25 }, /* Callisto Jupiter Platform */
+ { 0x9005, 0x0285, 0x9005, 0x028e, 0, 0, 26 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
+ { 0x9005, 0x0285, 0x9005, 0x028f, 0, 0, 27 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
+ { 0x9005, 0x0285, 0x9005, 0x0290, 0, 0, 28 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
+ { 0x9005, 0x0285, 0x1028, 0x0291, 0, 0, 29 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
+ { 0x9005, 0x0285, 0x9005, 0x0292, 0, 0, 30 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
+ { 0x9005, 0x0285, 0x9005, 0x0293, 0, 0, 31 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
+ { 0x9005, 0x0285, 0x9005, 0x0294, 0, 0, 32 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
+ { 0x9005, 0x0285, 0x103C, 0x3227, 0, 0, 33 }, /* AAR-2610SA PCI SATA 6ch */
+ { 0x9005, 0x0285, 0x9005, 0x0296, 0, 0, 34 }, /* ASR-2240S (SabreExpress) */
+ { 0x9005, 0x0285, 0x9005, 0x0297, 0, 0, 35 }, /* ASR-4005SAS */
+ { 0x9005, 0x0285, 0x1014, 0x02F2, 0, 0, 36 }, /* IBM 8i (AvonPark) */
+ { 0x9005, 0x0285, 0x9005, 0x0298, 0, 0, 37 }, /* ASR-4000SAS (BlackBird) */
+ { 0x9005, 0x0285, 0x9005, 0x0299, 0, 0, 38 }, /* ASR-4800SAS (Marauder-X) */
+ { 0x9005, 0x0285, 0x9005, 0x029A, 0, 0, 39 }, /* ASR-4805SAS (Marauder-E) */
+
+ { 0x9005, 0x0285, 0x1028, 0x0287, 0, 0, 40 }, /* Perc 320/DC*/
+ { 0x1011, 0x0046, 0x9005, 0x0365, 0, 0, 41 }, /* Adaptec 5400S (Mustang)*/
+ { 0x1011, 0x0046, 0x9005, 0x0364, 0, 0, 42 }, /* Adaptec 5400S (Mustang)*/
+ { 0x1011, 0x0046, 0x9005, 0x1364, 0, 0, 43 }, /* Dell PERC2/QC */
+ { 0x1011, 0x0046, 0x103c, 0x10c2, 0, 0, 44 }, /* HP NetRAID-4M */
+
+ { 0x9005, 0x0285, 0x1028, PCI_ANY_ID, 0, 0, 45 }, /* Dell Catchall */
+ { 0x9005, 0x0285, 0x17aa, PCI_ANY_ID, 0, 0, 46 }, /* Legend Catchall */
+ { 0x9005, 0x0285, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 47 }, /* Adaptec Catch All */
+ { 0x9005, 0x0286, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 48 }, /* Adaptec Rocket Catch All */
+ { 0,}
+};
+MODULE_DEVICE_TABLE(pci, aac_pci_tbl);
+
+/*
+ * dmb - For now we add the number of channels to this structure.
+ * In the future we should add a fib that reports the number of channels
+ * for the card. At that time we can remove the channels from here
+ */
+static struct aac_driver_ident aac_drivers[] = {
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 2/Si (Iguana/PERC2Si) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Opal/PERC3Di) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Si (SlimFast/PERC3Si */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Iguana FlipChip/PERC3DiF */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Viper/PERC3DiV) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Lexus/PERC3DiL) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Jaguar/PERC3DiJ) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Dagger/PERC3DiD) */
+ { aac_rx_init, "percraid", "DELL ", "PERCRAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* PERC 3/Di (Boxster/PERC3DiB) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "catapult ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* catapult */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "tomcat ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* tomcat */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2120S ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2120S (Crusader) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 2200S ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec 2200S (Vulcan-2m) */
+ { aac_rx_init, "aacraid", "Legend ", "Legend S220 ", 1, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S220 (Legend Crusader) */
+ { aac_rx_init, "aacraid", "Legend ", "Legend S230 ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend S230 (Legend Vulcan) */
+
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3230S ", 2 }, /* Adaptec 3230S (Harrier) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "Adaptec 3240S ", 2 }, /* Adaptec 3240S (Tornado) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020ZCR ", 2 }, /* ASR-2020ZCR SCSI PCI-X ZCR (Skyhawk) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025ZCR ", 2 }, /* ASR-2025ZCR SCSI SO-DIMM PCI-X ZCR (Terminator) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2230S PCI-X ", 2 }, /* ASR-2230S + ASR-2230SLP PCI-X (Lancer) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "ASR-2130S PCI-X ", 1 }, /* ASR-2130S (Lancer) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2820SA ", 1 }, /* AAR-2820SA (Intruder) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2620SA ", 1 }, /* AAR-2620SA (Intruder) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "AAR-2420SA ", 1 }, /* AAR-2420SA (Intruder) */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "Callisto ", 2, AAC_QUIRK_MASTER }, /* Jupiter Platform */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2020SA ", 1 }, /* ASR-2020SA SATA PCI-X ZCR (Skyhawk) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2025SA ", 1 }, /* ASR-2025SA SATA SO-DIMM PCI-X ZCR (Terminator) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2410SA SATA ", 1 }, /* AAR-2410SA PCI SATA 4ch (Jaguar II) */
+ { aac_rx_init, "aacraid", "DELL ", "CERC SR2 ", 1 }, /* CERC SATA RAID 2 PCI SATA 6ch (DellCorsair) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2810SA SATA ", 1 }, /* AAR-2810SA PCI SATA 8ch (Corsair-8) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-21610SA SATA", 1 }, /* AAR-21610SA PCI SATA 16ch (Corsair-16) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2026ZCR ", 1 }, /* ESD SO-DIMM PCI-X SATA ZCR (Prowler) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "AAR-2610SA ", 1 }, /* SATA 6Ch (Bearcat) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-2240S ", 1 }, /* ASR-2240S (SabreExpress) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4005SAS ", 1 }, /* ASR-4005SAS */
+ { aac_rx_init, "aacraid", "IBM ", "ServeRAID 8i ", 1 }, /* IBM 8i (AvonPark) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4000SAS ", 1 }, /* ASR-4000SAS (BlackBird & AvonPark) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4800SAS ", 1 }, /* ASR-4800SAS (Marauder-X) */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "ASR-4805SAS ", 1 }, /* ASR-4805SAS (Marauder-E) */
+
+ { aac_rx_init, "percraid", "DELL ", "PERC 320/DC ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Perc 320/DC*/
+ { aac_sa_init, "aacraid", "ADAPTEC ", "Adaptec 5400S ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
+ { aac_sa_init, "aacraid", "ADAPTEC ", "AAC-364 ", 4, AAC_QUIRK_34SG }, /* Adaptec 5400S (Mustang)*/
+ { aac_sa_init, "percraid", "DELL ", "PERCRAID ", 4, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell PERC2/QC */
+ { aac_sa_init, "hpnraid", "HP ", "NetRAID ", 4, AAC_QUIRK_34SG }, /* HP NetRAID-4M */
+
+ { aac_rx_init, "aacraid", "DELL ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Dell Catchall */
+ { aac_rx_init, "aacraid", "Legend ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Legend Catchall */
+ { aac_rx_init, "aacraid", "ADAPTEC ", "RAID ", 2, AAC_QUIRK_31BIT | AAC_QUIRK_34SG }, /* Adaptec Catch All */
+ { aac_rkt_init, "aacraid", "ADAPTEC ", "RAID ", 2 } /* Adaptec Rocket Catch All */
+};
+
+/**
+ * aac_queuecommand - queue a SCSI command
+ * @cmd: SCSI command to queue
+ * @done: Function to call on command completion
+ *
+ * Queues a command for execution by the associated Host Adapter.
+ *
+ * TODO: unify with aac_scsi_cmd().
+ */
+
+static int aac_queuecommand(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+{
+ cmd->scsi_done = done;
+ return (aac_scsi_cmd(cmd) ? FAILED : 0);
+}
+
+/**
+ * aac_info - Returns the host adapter name
+ * @shost: Scsi host to report on
+ *
+ * Returns a static string describing the device in question
+ */
+
+const char *aac_info(struct Scsi_Host *shost)
+{
+ struct aac_dev *dev = (struct aac_dev *)shost->hostdata;
+ return aac_drivers[dev->cardtype].name;
+}
+
+/**
+ * aac_get_driver_ident
+ * @devtype: index into lookup table
+ *
+ * Returns a pointer to the entry in the driver lookup table.
+ */
+
+struct aac_driver_ident* aac_get_driver_ident(int devtype)
+{
+ return &aac_drivers[devtype];
+}
+
+/**
+ * aac_biosparm - return BIOS parameters for disk
+ * @sdev: The scsi device corresponding to the disk
+ * @bdev: the block device corresponding to the disk
+ * @capacity: the sector capacity of the disk
+ * @geom: geometry block to fill in
+ *
+ * Return the Heads/Sectors/Cylinders BIOS Disk Parameters for Disk.
+ * The default disk geometry is 64 heads, 32 sectors, and the appropriate
+ * number of cylinders so as not to exceed drive capacity. In order for
+ * disks equal to or larger than 1 GB to be addressable by the BIOS
+ * without exceeding the BIOS limitation of 1024 cylinders, Extended
+ * Translation should be enabled. With Extended Translation enabled,
+ * drives between 1 GB inclusive and 2 GB exclusive are given a disk
+ * geometry of 128 heads and 32 sectors, and drives above 2 GB inclusive
+ * are given a disk geometry of 255 heads and 63 sectors. However, if
+ * the BIOS detects that the Extended Translation setting does not match
+ * the geometry in the partition table, then the translation inferred
+ * from the partition table will be used by the BIOS, and a warning may
+ * be displayed.
+ */
+
+static int aac_biosparm(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int *geom)
+{
+ struct diskparm *param = (struct diskparm *)geom;
+ unsigned char *buf;
+
+ dprintk((KERN_DEBUG "aac_biosparm.\n"));
+
+ /*
+ * Assuming extended translation is enabled - #REVISIT#
+ */
+ if (capacity >= 2 * 1024 * 1024) { /* 1 GB in 512 byte sectors */
+ if(capacity >= 4 * 1024 * 1024) { /* 2 GB in 512 byte sectors */
+ param->heads = 255;
+ param->sectors = 63;
+ } else {
+ param->heads = 128;
+ param->sectors = 32;
+ }
+ } else {
+ param->heads = 64;
+ param->sectors = 32;
+ }
+
+ param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
+
+ /*
+ * Read the first 1024 bytes from the disk device, if the boot
+ * sector partition table is valid, search for a partition table
+ * entry whose end_head matches one of the standard geometry
+ * translations ( 64/32, 128/32, 255/63 ).
+ */
+ buf = scsi_bios_ptable(bdev);
+ if(*(unsigned short *)(buf + 0x40) == cpu_to_le16(0xaa55)) {
+ struct partition *first = (struct partition * )buf;
+ struct partition *entry = first;
+ int saved_cylinders = param->cylinders;
+ int num;
+ unsigned char end_head, end_sec;
+
+ for(num = 0; num < 4; num++) {
+ end_head = entry->end_head;
+ end_sec = entry->end_sector & 0x3f;
+
+ if(end_head == 63) {
+ param->heads = 64;
+ param->sectors = 32;
+ break;
+ } else if(end_head == 127) {
+ param->heads = 128;
+ param->sectors = 32;
+ break;
+ } else if(end_head == 254) {
+ param->heads = 255;
+ param->sectors = 63;
+ break;
+ }
+ entry++;
+ }
+
+ if (num == 4) {
+ end_head = first->end_head;
+ end_sec = first->end_sector & 0x3f;
+ }
+
+ param->cylinders = cap_to_cyls(capacity, param->heads * param->sectors);
+ if (num < 4 && end_sec == param->sectors) {
+ if (param->cylinders != saved_cylinders)
+ dprintk((KERN_DEBUG "Adopting geometry: heads=%d, sectors=%d from partition table %d.\n",
+ param->heads, param->sectors, num));
+ } else if (end_head > 0 || end_sec > 0) {
+ dprintk((KERN_DEBUG "Strange geometry: heads=%d, sectors=%d in partition table %d.\n",
+ end_head + 1, end_sec, num));
+ dprintk((KERN_DEBUG "Using geometry: heads=%d, sectors=%d.\n",
+ param->heads, param->sectors));
+ }
+ }
+ kfree(buf);
+ return 0;
+}
+
+/**
+ * aac_slave_configure - compute queue depths
+ * @sdev: SCSI device we are considering
+ *
+ * Selects queue depths for each target device based on the host adapter's
+ * total capacity and the queue depth supported by the target device.
+ * A queue depth of one automatically disables tagged queueing.
+ */
+
+static int aac_slave_configure(struct scsi_device *sdev)
+{
+ if (sdev->tagged_supported)
+ scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, 128);
+ else
+ scsi_adjust_queue_depth(sdev, 0, 1);
+ return 0;
+}
+
+static int aac_ioctl(struct scsi_device *sdev, int cmd, void __user * arg)
+{
+ struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+ return aac_do_ioctl(dev, cmd, arg);
+}
+
+/*
+ * XXX: does aac really need no error handling??
+ */
+static int aac_eh_abort(struct scsi_cmnd *cmd)
+{
+ return FAILED;
+}
+
+/*
+ * aac_eh_reset - Reset command handling
+ * @scsi_cmd: SCSI command block causing the reset
+ *
+ */
+static int aac_eh_reset(struct scsi_cmnd* cmd)
+{
+ struct scsi_device * dev = cmd->device;
+ struct Scsi_Host * host = dev->host;
+ struct scsi_cmnd * command;
+ int count;
+ struct aac_dev * aac;
+ unsigned long flags;
+
+ printk(KERN_ERR "%s: Host adapter reset request. SCSI hang ?\n",
+ AAC_DRIVERNAME);
+
+
+ aac = (struct aac_dev *)host->hostdata;
+ if (aac_adapter_check_health(aac)) {
+ printk(KERN_ERR "%s: Host adapter appears dead\n",
+ AAC_DRIVERNAME);
+ return -ENODEV;
+ }
+ /*
+ * Wait for all commands to complete to this specific
+ * target (block maximum 60 seconds).
+ */
+ for (count = 60; count; --count) {
+ int active = 0;
+ __shost_for_each_device(dev, host) {
+ spin_lock_irqsave(&dev->list_lock, flags);
+ list_for_each_entry(command, &dev->cmd_list, list) {
+ if (command->serial_number) {
+ active++;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&dev->list_lock, flags);
+ if (active)
+ break;
+
+ }
+ /*
+ * We can exit If all the commands are complete
+ */
+ if (active == 0)
+ return SUCCESS;
+ spin_unlock_irq(host->host_lock);
+ ssleep(1);
+ spin_lock_irq(host->host_lock);
+ }
+ printk(KERN_ERR "%s: SCSI bus appears hung\n", AAC_DRIVERNAME);
+ return -ETIMEDOUT;
+}
+
+/**
+ * aac_cfg_open - open a configuration file
+ * @inode: inode being opened
+ * @file: file handle attached
+ *
+ * Called when the configuration device is opened. Does the needed
+ * set up on the handle and then returns
+ *
+ * Bugs: This needs extending to check a given adapter is present
+ * so we can support hot plugging, and to ref count adapters.
+ */
+
+static int aac_cfg_open(struct inode *inode, struct file *file)
+{
+ struct aac_dev *aac;
+ unsigned minor = iminor(inode);
+ int err = -ENODEV;
+
+ list_for_each_entry(aac, &aac_devices, entry) {
+ if (aac->id == minor) {
+ file->private_data = aac;
+ err = 0;
+ break;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * aac_cfg_ioctl - AAC configuration request
+ * @inode: inode of device
+ * @file: file handle
+ * @cmd: ioctl command code
+ * @arg: argument
+ *
+ * Handles a configuration ioctl. Currently this involves wrapping it
+ * up and feeding it into the nasty windowsalike glue layer.
+ *
+ * Bugs: Needs locking against parallel ioctls lower down
+ * Bugs: Needs to handle hot plugging
+ */
+
+static int aac_cfg_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ return aac_do_ioctl(file->private_data, cmd, (void __user *)arg);
+}
+
+#ifdef CONFIG_COMPAT
+static long aac_compat_do_ioctl(struct aac_dev *dev, unsigned cmd, unsigned long arg)
+{
+ long ret;
+ lock_kernel();
+ switch (cmd) {
+ case FSACTL_MINIPORT_REV_CHECK:
+ case FSACTL_SENDFIB:
+ case FSACTL_OPEN_GET_ADAPTER_FIB:
+ case FSACTL_CLOSE_GET_ADAPTER_FIB:
+ case FSACTL_SEND_RAW_SRB:
+ case FSACTL_GET_PCI_INFO:
+ case FSACTL_QUERY_DISK:
+ case FSACTL_DELETE_DISK:
+ case FSACTL_FORCE_DELETE_DISK:
+ case FSACTL_GET_CONTAINERS:
+ ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
+ break;
+
+ case FSACTL_GET_NEXT_ADAPTER_FIB: {
+ struct fib_ioctl __user *f;
+
+ f = compat_alloc_user_space(sizeof(*f));
+ ret = 0;
+ if (clear_user(f, sizeof(*f) != sizeof(*f)))
+ ret = -EFAULT;
+ if (copy_in_user(f, (void __user *)arg, sizeof(struct fib_ioctl) - sizeof(u32)))
+ ret = -EFAULT;
+ if (!ret)
+ ret = aac_do_ioctl(dev, cmd, (void __user *)arg);
+ break;
+ }
+
+ default:
+ ret = -ENOIOCTLCMD;
+ break;
+ }
+ unlock_kernel();
+ return ret;
+}
+
+static int aac_compat_ioctl(struct scsi_device *sdev, int cmd, void __user *arg)
+{
+ struct aac_dev *dev = (struct aac_dev *)sdev->host->hostdata;
+ return aac_compat_do_ioctl(dev, cmd, (unsigned long)arg);
+}
+
+static long aac_compat_cfg_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+ return aac_compat_do_ioctl((struct aac_dev *)file->private_data, cmd, arg);
+}
+#endif
+
+static struct file_operations aac_cfg_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = aac_cfg_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = aac_compat_cfg_ioctl,
+#endif
+ .open = aac_cfg_open,
+};
+
+static struct scsi_host_template aac_driver_template = {
+ .module = THIS_MODULE,
+ .name = "AAC",
+ .proc_name = "aacraid",
+ .info = aac_info,
+ .ioctl = aac_ioctl,
+#ifdef CONFIG_COMPAT
+ .compat_ioctl = aac_compat_ioctl,
+#endif
+ .queuecommand = aac_queuecommand,
+ .bios_param = aac_biosparm,
+ .slave_configure = aac_slave_configure,
+ .eh_abort_handler = aac_eh_abort,
+ .eh_host_reset_handler = aac_eh_reset,
+ .can_queue = AAC_NUM_IO_FIB,
+ .this_id = 16,
+ .sg_tablesize = 16,
+ .max_sectors = 128,
+#if (AAC_NUM_IO_FIB > 256)
+ .cmd_per_lun = 256,
+#else
+ .cmd_per_lun = AAC_NUM_IO_FIB,
+#endif
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+
+static int __devinit aac_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ unsigned index = id->driver_data;
+ struct Scsi_Host *shost;
+ struct aac_dev *aac;
+ struct list_head *insert = &aac_devices;
+ int error = -ENODEV;
+ int unique_id = 0;
+
+ list_for_each_entry(aac, &aac_devices, entry) {
+ if (aac->id > unique_id)
+ break;
+ insert = &aac->entry;
+ unique_id++;
+ }
+
+ if (pci_enable_device(pdev))
+ goto out;
+
+ if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL) ||
+ pci_set_consistent_dma_mask(pdev, 0xFFFFFFFFULL))
+ goto out;
+ /*
+ * If the quirk31 bit is set, the adapter needs adapter
+ * to driver communication memory to be allocated below 2gig
+ */
+ if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
+ if (pci_set_dma_mask(pdev, 0x7FFFFFFFULL) ||
+ pci_set_consistent_dma_mask(pdev, 0x7FFFFFFFULL))
+ goto out;
+
+ pci_set_master(pdev);
+
+ shost = scsi_host_alloc(&aac_driver_template, sizeof(struct aac_dev));
+ if (!shost)
+ goto out_disable_pdev;
+
+ shost->irq = pdev->irq;
+ shost->base = pci_resource_start(pdev, 0);
+ shost->unique_id = unique_id;
+
+ aac = (struct aac_dev *)shost->hostdata;
+ aac->scsi_host_ptr = shost;
+ aac->pdev = pdev;
+ aac->name = aac_driver_template.name;
+ aac->id = shost->unique_id;
+ aac->cardtype = index;
+ INIT_LIST_HEAD(&aac->entry);
+
+ aac->fibs = kmalloc(sizeof(struct fib) * AAC_NUM_FIB, GFP_KERNEL);
+ if (!aac->fibs)
+ goto out_free_host;
+ spin_lock_init(&aac->fib_lock);
+
+ if ((*aac_drivers[index].init)(aac))
+ goto out_free_fibs;
+
+ /*
+ * If we had set a smaller DMA mask earlier, set it to 4gig
+ * now since the adapter can dma data to at least a 4gig
+ * address space.
+ */
+ if (aac_drivers[index].quirks & AAC_QUIRK_31BIT)
+ if (pci_set_dma_mask(pdev, 0xFFFFFFFFULL))
+ goto out_free_fibs;
+
+ aac_get_adapter_info(aac);
+
+ /*
+ * max channel will be the physical channels plus 1 virtual channel
+ * all containers are on the virtual channel 0
+ * physical channels are address by their actual physical number+1
+ */
+ if (aac->nondasd_support == 1)
+ shost->max_channel = aac_drivers[index].channels+1;
+ else
+ shost->max_channel = 1;
+
+ aac_get_config_status(aac);
+ aac_get_containers(aac);
+ list_add(&aac->entry, insert);
+
+ shost->max_id = aac->maximum_num_containers;
+ if (shost->max_id < MAXIMUM_NUM_CONTAINERS)
+ shost->max_id = MAXIMUM_NUM_CONTAINERS;
+ else
+ shost->this_id = shost->max_id;
+
+ /*
+ * dmb - we may need to move the setting of these parms somewhere else once
+ * we get a fib that can report the actual numbers
+ */
+ shost->max_lun = AAC_MAX_LUN;
+
+ pci_set_drvdata(pdev, shost);
+
+ error = scsi_add_host(shost, &pdev->dev);
+ if (error)
+ goto out_deinit;
+ scsi_scan_host(shost);
+
+ return 0;
+
+out_deinit:
+ kill_proc(aac->thread_pid, SIGKILL, 0);
+ wait_for_completion(&aac->aif_completion);
+
+ aac_send_shutdown(aac);
+ fib_map_free(aac);
+ pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr, aac->comm_phys);
+ kfree(aac->queues);
+ free_irq(pdev->irq, aac);
+ iounmap(aac->regs.sa);
+ out_free_fibs:
+ kfree(aac->fibs);
+ kfree(aac->fsa_dev);
+ out_free_host:
+ scsi_host_put(shost);
+ out_disable_pdev:
+ pci_disable_device(pdev);
+ out:
+ return error;
+}
+
+static void __devexit aac_remove_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct aac_dev *aac = (struct aac_dev *)shost->hostdata;
+
+ scsi_remove_host(shost);
+
+ kill_proc(aac->thread_pid, SIGKILL, 0);
+ wait_for_completion(&aac->aif_completion);
+
+ aac_send_shutdown(aac);
+ fib_map_free(aac);
+ pci_free_consistent(aac->pdev, aac->comm_size, aac->comm_addr,
+ aac->comm_phys);
+ kfree(aac->queues);
+
+ free_irq(pdev->irq, aac);
+ iounmap(aac->regs.sa);
+
+ kfree(aac->fibs);
+
+ list_del(&aac->entry);
+ scsi_host_put(shost);
+ pci_disable_device(pdev);
+}
+
+static struct pci_driver aac_pci_driver = {
+ .name = AAC_DRIVERNAME,
+ .id_table = aac_pci_tbl,
+ .probe = aac_probe_one,
+ .remove = __devexit_p(aac_remove_one),
+};
+
+static int __init aac_init(void)
+{
+ int error;
+
+ printk(KERN_INFO "Red Hat/Adaptec aacraid driver (%s %s)\n",
+ AAC_DRIVER_VERSION, AAC_DRIVER_BUILD_DATE);
+
+ error = pci_module_init(&aac_pci_driver);
+ if (error)
+ return error;
+
+ aac_cfg_major = register_chrdev( 0, "aac", &aac_cfg_fops);
+ if (aac_cfg_major < 0) {
+ printk(KERN_WARNING
+ "aacraid: unable to register \"aac\" device.\n");
+ }
+ return 0;
+}
+
+static void __exit aac_exit(void)
+{
+ unregister_chrdev(aac_cfg_major, "aac");
+ pci_unregister_driver(&aac_pci_driver);
+}
+
+module_init(aac_init);
+module_exit(aac_exit);