diff options
Diffstat (limited to 'drivers/scsi/bnx2i')
| -rw-r--r-- | drivers/scsi/bnx2i/bnx2i.h | 4 | ||||
| -rw-r--r-- | drivers/scsi/bnx2i/bnx2i_init.c | 33 | ||||
| -rw-r--r-- | drivers/scsi/bnx2i/bnx2i_iscsi.c | 12 |
3 files changed, 40 insertions, 9 deletions
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h index c17c3a3d52b8..fed1a686da67 100644 --- a/drivers/scsi/bnx2i/bnx2i.h +++ b/drivers/scsi/bnx2i/bnx2i.h @@ -295,6 +295,7 @@ struct iscsi_cid_queue { * @max_cqes: CQ size * @num_ccell: number of command cells per connection * @ofld_conns_active: active connection list + * @eh_wait: wait queue for the endpoint to shutdown * @max_active_conns: max offload connections supported by this device * @cid_que: iscsi cid queue * @ep_rdwr_lock: read / write lock to synchronize various ep lists @@ -306,6 +307,7 @@ struct iscsi_cid_queue { * @dummy_buffer: Dummy buffer to be used with zero length scsicmd reqs * @dummy_buf_dma: DMA address of 'dummy_buffer' memory buffer * @lock: lock to synchonize access to hba structure + * @hba_shutdown_tmo: Timeout value to shutdown each connection * @pci_did: PCI device ID * @pci_vid: PCI vendor ID * @pci_sdid: PCI subsystem device ID @@ -770,6 +772,8 @@ extern struct bnx2i_endpoint *bnx2i_find_ep_in_destroy_list( extern int bnx2i_map_ep_dbell_regs(struct bnx2i_endpoint *ep); extern void bnx2i_arm_cq_event_coalescing(struct bnx2i_endpoint *ep, u8 action); +extern int bnx2i_hw_ep_disconnect(struct bnx2i_endpoint *bnx2i_ep); + /* Debug related function prototypes */ extern void bnx2i_print_pend_cmd_queue(struct bnx2i_conn *conn); extern void bnx2i_print_active_cmd_queue(struct bnx2i_conn *conn); diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c index af6a00a600fb..f0f8361af4e9 100644 --- a/drivers/scsi/bnx2i/bnx2i_init.c +++ b/drivers/scsi/bnx2i/bnx2i_init.c @@ -176,6 +176,9 @@ void bnx2i_start(void *handle) void bnx2i_stop(void *handle) { struct bnx2i_hba *hba = handle; + struct list_head *pos, *tmp; + struct bnx2i_endpoint *bnx2i_ep; + int conns_active; /* check if cleanup happened in GOING_DOWN context */ if (!test_and_clear_bit(ADAPTER_STATE_GOING_DOWN, @@ -187,9 +190,33 @@ void bnx2i_stop(void *handle) * control returns to network driver. So it is required to cleanup and * release all connection resources before returning from this routine. */ - wait_event_interruptible_timeout(hba->eh_wait, - (hba->ofld_conns_active == 0), - hba->hba_shutdown_tmo); + while (hba->ofld_conns_active) { + conns_active = hba->ofld_conns_active; + wait_event_interruptible_timeout(hba->eh_wait, + (hba->ofld_conns_active != conns_active), + hba->hba_shutdown_tmo); + if (hba->ofld_conns_active == conns_active) + break; + } + if (hba->ofld_conns_active) { + /* Stage to force the disconnection + * This is the case where the daemon is either slow or + * not present + */ + printk(KERN_ALERT "bnx2i: Wait timeout, force all eps " + "to disconnect (%d)\n", hba->ofld_conns_active); + mutex_lock(&hba->net_dev_lock); + list_for_each_safe(pos, tmp, &hba->ep_active_list) { + bnx2i_ep = list_entry(pos, struct bnx2i_endpoint, link); + /* Clean up the chip only */ + bnx2i_hw_ep_disconnect(bnx2i_ep); + } + mutex_unlock(&hba->net_dev_lock); + if (hba->ofld_conns_active) + printk(KERN_ERR "bnx2i: EP disconnect timeout (%d)!\n", + hba->ofld_conns_active); + } + /* This flag should be cleared last so that ep_disconnect() gracefully * cleans up connection context */ diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index fb5fe88de90f..1600e7cae191 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -708,7 +708,6 @@ bnx2i_find_ep_in_destroy_list(struct bnx2i_hba *hba, u32 iscsi_cid) return ep; } - /** * bnx2i_ep_active_list_add - add an entry to ep active list * @hba: pointer to adapter instance @@ -856,9 +855,9 @@ struct bnx2i_hba *bnx2i_alloc_hba(struct cnic_dev *cnic) mutex_init(&hba->net_dev_lock); init_waitqueue_head(&hba->eh_wait); if (test_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type)) - hba->hba_shutdown_tmo = 240 * HZ; + hba->hba_shutdown_tmo = 20 * HZ; else /* 5706/5708/5709 */ - hba->hba_shutdown_tmo = 30 * HZ; + hba->hba_shutdown_tmo = 20 * HZ; if (iscsi_host_add(shost, &hba->pcidev->dev)) goto free_dump_mem; @@ -1700,10 +1699,11 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost, if (!hba || test_bit(ADAPTER_STATE_GOING_DOWN, &hba->adapter_state)) { rc = -EINVAL; - goto check_busy; + goto nohba; } cnic = hba->cnic; + mutex_lock(&hba->net_dev_lock); ep = bnx2i_alloc_ep(hba); if (!ep) { rc = -ENOMEM; @@ -1711,7 +1711,6 @@ static struct iscsi_endpoint *bnx2i_ep_connect(struct Scsi_Host *shost, } bnx2i_ep = ep->dd_data; - mutex_lock(&hba->net_dev_lock); if (bnx2i_adapter_ready(hba)) { rc = -EPERM; goto net_if_down; @@ -1813,8 +1812,9 @@ iscsi_cid_err: bnx2i_free_qp_resc(hba, bnx2i_ep); qp_resc_err: bnx2i_free_ep(ep); - mutex_unlock(&hba->net_dev_lock); check_busy: + mutex_unlock(&hba->net_dev_lock); +nohba: bnx2i_unreg_dev_all(); return ERR_PTR(rc); } |