summaryrefslogtreecommitdiff
path: root/drivers/scsi/hpsa.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/hpsa.c')
-rw-r--r--drivers/scsi/hpsa.c1336
1 files changed, 1077 insertions, 259 deletions
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 7506b65d8e6c..6a8f95808ee0 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -41,6 +41,7 @@
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_transport_sas.h>
#include <scsi/scsi_dbg.h>
#include <linux/cciss_ioctl.h>
#include <linux/string.h>
@@ -54,8 +55,11 @@
#include "hpsa_cmd.h"
#include "hpsa.h"
-/* HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.' */
-#define HPSA_DRIVER_VERSION "3.4.10-0"
+/*
+ * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.'
+ * with an optional trailing '-' followed by a byte value (0-255).
+ */
+#define HPSA_DRIVER_VERSION "3.4.14-0"
#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
#define HPSA "hpsa"
@@ -205,6 +209,16 @@ static struct board_type products[] = {
{0xFFFF103C, "Unknown Smart Array", &SA5_access},
};
+static struct scsi_transport_template *hpsa_sas_transport_template;
+static int hpsa_add_sas_host(struct ctlr_info *h);
+static void hpsa_delete_sas_host(struct ctlr_info *h);
+static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
+ struct hpsa_scsi_dev_t *device);
+static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device);
+static struct hpsa_scsi_dev_t
+ *hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
+ struct sas_rphy *rphy);
+
#define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy)
static const struct scsi_cmnd hpsa_cmd_busy;
#define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle)
@@ -230,6 +244,7 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
int cmd_type);
static void hpsa_free_cmd_pool(struct ctlr_info *h);
#define VPD_PAGE (1 << 8)
+#define HPSA_SIMPLE_ERROR_BITS 0x03
static int hpsa_scsi_queue_command(struct Scsi_Host *h, struct scsi_cmnd *cmd);
static void hpsa_scan_start(struct Scsi_Host *);
@@ -243,7 +258,7 @@ static int hpsa_slave_alloc(struct scsi_device *sdev);
static int hpsa_slave_configure(struct scsi_device *sdev);
static void hpsa_slave_destroy(struct scsi_device *sdev);
-static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
+static void hpsa_update_scsi_devices(struct ctlr_info *h);
static int check_for_unit_attention(struct ctlr_info *h,
struct CommandList *c);
static void check_ioctl_unit_attention(struct ctlr_info *h,
@@ -274,7 +289,10 @@ static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
static void hpsa_command_resubmit_worker(struct work_struct *work);
static u32 lockup_detected(struct ctlr_info *h);
static int detect_controller_lockup(struct ctlr_info *h);
-static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device);
+static void hpsa_disable_rld_caching(struct ctlr_info *h);
+static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
+ struct ReportExtendedLUNdata *buf, int bufsize);
+static int hpsa_luns_changed(struct ctlr_info *h);
static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
{
@@ -606,7 +624,7 @@ static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
}
static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
- "1(+0)ADM", "UNKNOWN"
+ "1(+0)ADM", "UNKNOWN", "PHYS DRV"
};
#define HPSA_RAID_0 0
#define HPSA_RAID_4 1
@@ -615,7 +633,13 @@ static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
#define HPSA_RAID_51 4
#define HPSA_RAID_6 5 /* also used for RAID 60 */
#define HPSA_RAID_ADM 6 /* also used for RAID 1+0 ADM */
-#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 1)
+#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 2)
+#define PHYSICAL_DRIVE (ARRAY_SIZE(raid_label) - 1)
+
+static inline bool is_logical_device(struct hpsa_scsi_dev_t *device)
+{
+ return !device->physical_device;
+}
static ssize_t raid_level_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -637,7 +661,7 @@ static ssize_t raid_level_show(struct device *dev,
}
/* Is this even a logical drive? */
- if (!is_logical_dev_addr_mode(hdev->scsi3addr)) {
+ if (!is_logical_device(hdev)) {
spin_unlock_irqrestore(&h->lock, flags);
l = snprintf(buf, PAGE_SIZE, "N/A\n");
return l;
@@ -726,7 +750,6 @@ static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev,
}
#define MAX_PATHS 8
-#define PATH_STRING_LEN 50
static ssize_t path_info_show(struct device *dev,
struct device_attribute *attr, char *buf)
@@ -742,9 +765,7 @@ static ssize_t path_info_show(struct device *dev,
u8 path_map_index = 0;
char *active;
unsigned char phys_connector[2];
- unsigned char path[MAX_PATHS][PATH_STRING_LEN];
- memset(path, 0, MAX_PATHS * PATH_STRING_LEN);
sdev = to_scsi_device(dev);
h = sdev_to_hba(sdev);
spin_lock_irqsave(&h->devlock, flags);
@@ -764,18 +785,19 @@ static ssize_t path_info_show(struct device *dev,
else
continue;
- output_len = snprintf(path[i],
- PATH_STRING_LEN, "[%d:%d:%d:%d] %20.20s ",
+ output_len += scnprintf(buf + output_len,
+ PAGE_SIZE - output_len,
+ "[%d:%d:%d:%d] %20.20s ",
h->scsi_host->host_no,
hdev->bus, hdev->target, hdev->lun,
scsi_device_type(hdev->devtype));
- if (is_ext_target(h, hdev) ||
- (hdev->devtype == TYPE_RAID) ||
- is_logical_dev_addr_mode(hdev->scsi3addr)) {
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN, "%s\n",
- active);
+ if (hdev->external ||
+ hdev->devtype == TYPE_RAID ||
+ is_logical_device(hdev)) {
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len,
+ "%s\n", active);
continue;
}
@@ -787,36 +809,33 @@ static ssize_t path_info_show(struct device *dev,
if (phys_connector[1] < '0')
phys_connector[1] = '0';
if (hdev->phys_connector[i] > 0)
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN,
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len,
"PORT: %.2s ",
phys_connector);
- if (hdev->devtype == TYPE_DISK &&
- hdev->expose_state != HPSA_DO_NOT_EXPOSE) {
+ if (hdev->devtype == TYPE_DISK && hdev->expose_device) {
if (box == 0 || box == 0xFF) {
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN,
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len,
"BAY: %hhu %s\n",
bay, active);
} else {
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN,
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len,
"BOX: %hhu BAY: %hhu %s\n",
box, bay, active);
}
} else if (box != 0 && box != 0xFF) {
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN, "BOX: %hhu %s\n",
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len, "BOX: %hhu %s\n",
box, active);
} else
- output_len += snprintf(path[i] + output_len,
- PATH_STRING_LEN, "%s\n", active);
+ output_len += snprintf(buf + output_len,
+ PAGE_SIZE - output_len, "%s\n", active);
}
spin_unlock_irqrestore(&h->devlock, flags);
- return snprintf(buf, output_len+1, "%s%s%s%s%s%s%s%s",
- path[0], path[1], path[2], path[3],
- path[4], path[5], path[6], path[7]);
+ return output_len;
}
static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
@@ -848,7 +867,6 @@ static struct device_attribute *hpsa_sdev_attrs[] = {
&dev_attr_unique_id,
&dev_attr_hp_ssd_smart_path_enabled,
&dev_attr_path_info,
- &dev_attr_lockup_detected,
NULL,
};
@@ -860,6 +878,7 @@ static struct device_attribute *hpsa_shost_attrs[] = {
&dev_attr_resettable,
&dev_attr_hp_ssd_smart_path_status,
&dev_attr_raid_offload_debug,
+ &dev_attr_lockup_detected,
NULL,
};
@@ -1134,25 +1153,62 @@ static int hpsa_find_target_lun(struct ctlr_info *h,
return !found;
}
-static inline void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
+static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
struct hpsa_scsi_dev_t *dev, char *description)
{
+#define LABEL_SIZE 25
+ char label[LABEL_SIZE];
+
+ if (h == NULL || h->pdev == NULL || h->scsi_host == NULL)
+ return;
+
+ switch (dev->devtype) {
+ case TYPE_RAID:
+ snprintf(label, LABEL_SIZE, "controller");
+ break;
+ case TYPE_ENCLOSURE:
+ snprintf(label, LABEL_SIZE, "enclosure");
+ break;
+ case TYPE_DISK:
+ if (dev->external)
+ snprintf(label, LABEL_SIZE, "external");
+ else if (!is_logical_dev_addr_mode(dev->scsi3addr))
+ snprintf(label, LABEL_SIZE, "%s",
+ raid_label[PHYSICAL_DRIVE]);
+ else
+ snprintf(label, LABEL_SIZE, "RAID-%s",
+ dev->raid_level > RAID_UNKNOWN ? "?" :
+ raid_label[dev->raid_level]);
+ break;
+ case TYPE_ROM:
+ snprintf(label, LABEL_SIZE, "rom");
+ break;
+ case TYPE_TAPE:
+ snprintf(label, LABEL_SIZE, "tape");
+ break;
+ case TYPE_MEDIUM_CHANGER:
+ snprintf(label, LABEL_SIZE, "changer");
+ break;
+ default:
+ snprintf(label, LABEL_SIZE, "UNKNOWN");
+ break;
+ }
+
dev_printk(level, &h->pdev->dev,
- "scsi %d:%d:%d:%d: %s %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n",
+ "scsi %d:%d:%d:%d: %s %s %.8s %.16s %s SSDSmartPathCap%c En%c Exp=%d\n",
h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
description,
scsi_device_type(dev->devtype),
dev->vendor,
dev->model,
- dev->raid_level > RAID_UNKNOWN ?
- "RAID-?" : raid_label[dev->raid_level],
+ label,
dev->offload_config ? '+' : '-',
dev->offload_enabled ? '+' : '-',
- dev->expose_state);
+ dev->expose_device);
}
/* Add an entry into h->dev[] array. */
-static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno,
+static int hpsa_scsi_add_entry(struct ctlr_info *h,
struct hpsa_scsi_dev_t *device,
struct hpsa_scsi_dev_t *added[], int *nadded)
{
@@ -1221,14 +1277,14 @@ lun_assigned:
added[*nadded] = device;
(*nadded)++;
hpsa_show_dev_msg(KERN_INFO, h, device,
- device->expose_state & HPSA_SCSI_ADD ? "added" : "masked");
+ device->expose_device ? "added" : "masked");
device->offload_to_be_enabled = device->offload_enabled;
device->offload_enabled = 0;
return 0;
}
/* Update an entry in h->dev[] array. */
-static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
+static void hpsa_scsi_update_entry(struct ctlr_info *h,
int entry, struct hpsa_scsi_dev_t *new_entry)
{
int offload_enabled;
@@ -1276,7 +1332,7 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno,
}
/* Replace an entry from h->dev[] array. */
-static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
+static void hpsa_scsi_replace_entry(struct ctlr_info *h,
int entry, struct hpsa_scsi_dev_t *new_entry,
struct hpsa_scsi_dev_t *added[], int *nadded,
struct hpsa_scsi_dev_t *removed[], int *nremoved)
@@ -1304,7 +1360,7 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno,
}
/* Remove an entry from h->dev[] array. */
-static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry,
+static void hpsa_scsi_remove_entry(struct ctlr_info *h, int entry,
struct hpsa_scsi_dev_t *removed[], int *nremoved)
{
/* assumes h->devlock is held */
@@ -1415,6 +1471,9 @@ static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle,
#define DEVICE_CHANGED 1
#define DEVICE_SAME 2
#define DEVICE_UPDATED 3
+ if (needle == NULL)
+ return DEVICE_NOT_FOUND;
+
for (i = 0; i < haystack_size; i++) {
if (haystack[i] == NULL) /* previously removed. */
continue;
@@ -1577,9 +1636,11 @@ static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
if (!logical_drive->offload_config)
continue;
for (j = 0; j < ndevices; j++) {
+ if (dev[j] == NULL)
+ continue;
if (dev[j]->devtype != TYPE_DISK)
continue;
- if (is_logical_dev_addr_mode(dev[j]->scsi3addr))
+ if (is_logical_device(dev[j]))
continue;
if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle)
continue;
@@ -1620,9 +1681,11 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
int i;
for (i = 0; i < ndevices; i++) {
+ if (dev[i] == NULL)
+ continue;
if (dev[i]->devtype != TYPE_DISK)
continue;
- if (!is_logical_dev_addr_mode(dev[i]->scsi3addr))
+ if (!is_logical_device(dev[i]))
continue;
/*
@@ -1638,7 +1701,50 @@ static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
}
}
-static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
+static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
+{
+ int rc = 0;
+
+ if (!h->scsi_host)
+ return 1;
+
+ if (is_logical_device(device)) /* RAID */
+ rc = scsi_add_device(h->scsi_host, device->bus,
+ device->target, device->lun);
+ else /* HBA */
+ rc = hpsa_add_sas_device(h->sas_host, device);
+
+ return rc;
+}
+
+static void hpsa_remove_device(struct ctlr_info *h,
+ struct hpsa_scsi_dev_t *device)
+{
+ struct scsi_device *sdev = NULL;
+
+ if (!h->scsi_host)
+ return;
+
+ if (is_logical_device(device)) { /* RAID */
+ sdev = scsi_device_lookup(h->scsi_host, device->bus,
+ device->target, device->lun);
+ if (sdev) {
+ scsi_remove_device(sdev);
+ scsi_device_put(sdev);
+ } else {
+ /*
+ * We don't expect to get here. Future commands
+ * to this device will get a selection timeout as
+ * if the device were gone.
+ */
+ hpsa_show_dev_msg(KERN_WARNING, h, device,
+ "didn't find device for removal.");
+ }
+ } else /* HBA */
+ hpsa_remove_sas_device(device);
+}
+
+static void adjust_hpsa_scsi_table(struct ctlr_info *h,
struct hpsa_scsi_dev_t *sd[], int nsds)
{
/* sd contains scsi3 addresses and devtypes, and inquiry
@@ -1650,7 +1756,15 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
unsigned long flags;
struct hpsa_scsi_dev_t **added, **removed;
int nadded, nremoved;
- struct Scsi_Host *sh = NULL;
+
+ /*
+ * A reset can cause a device status to change
+ * re-schedule the scan to see what happened.
+ */
+ if (h->reset_in_progress) {
+ h->drv_req_rescan = 1;
+ return;
+ }
added = kzalloc(sizeof(*added) * HPSA_MAX_DEVICES, GFP_KERNEL);
removed = kzalloc(sizeof(*removed) * HPSA_MAX_DEVICES, GFP_KERNEL);
@@ -1678,19 +1792,18 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry);
if (device_change == DEVICE_NOT_FOUND) {
changes++;
- hpsa_scsi_remove_entry(h, hostno, i,
- removed, &nremoved);
+ hpsa_scsi_remove_entry(h, i, removed, &nremoved);
continue; /* remove ^^^, hence i not incremented */
} else if (device_change == DEVICE_CHANGED) {
changes++;
- hpsa_scsi_replace_entry(h, hostno, i, sd[entry],
+ hpsa_scsi_replace_entry(h, i, sd[entry],
added, &nadded, removed, &nremoved);
/* Set it to NULL to prevent it from being freed
* at the bottom of hpsa_update_scsi_devices()
*/
sd[entry] = NULL;
} else if (device_change == DEVICE_UPDATED) {
- hpsa_scsi_update_entry(h, hostno, i, sd[entry]);
+ hpsa_scsi_update_entry(h, i, sd[entry]);
}
i++;
}
@@ -1718,8 +1831,7 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
h->ndevices, &entry);
if (device_change == DEVICE_NOT_FOUND) {
changes++;
- if (hpsa_scsi_add_entry(h, hostno, sd[i],
- added, &nadded) != 0)
+ if (hpsa_scsi_add_entry(h, sd[i], added, &nadded) != 0)
break;
sd[i] = NULL; /* prevent from being freed later. */
} else if (device_change == DEVICE_CHANGED) {
@@ -1735,8 +1847,11 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
/* Now that h->dev[]->phys_disk[] is coherent, we can enable
* any logical drives that need it enabled.
*/
- for (i = 0; i < h->ndevices; i++)
+ for (i = 0; i < h->ndevices; i++) {
+ if (h->dev[i] == NULL)
+ continue;
h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled;
+ }
spin_unlock_irqrestore(&h->devlock, flags);
@@ -1755,47 +1870,37 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno,
* (or if there are no changes) scsi_scan_host will do it later the
* first time through.
*/
- if (hostno == -1 || !changes)
+ if (!changes)
goto free_and_out;
- sh = h->scsi_host;
/* Notify scsi mid layer of any removed devices */
for (i = 0; i < nremoved; i++) {
- if (removed[i]->expose_state & HPSA_SCSI_ADD) {
- struct scsi_device *sdev =
- scsi_device_lookup(sh, removed[i]->bus,
- removed[i]->target, removed[i]->lun);
- if (sdev != NULL) {
- scsi_remove_device(sdev);
- scsi_device_put(sdev);
- } else {
- /*
- * We don't expect to get here.
- * future cmds to this device will get selection
- * timeout as if the device was gone.
- */
- hpsa_show_dev_msg(KERN_WARNING, h, removed[i],
- "didn't find device for removal.");
- }
- }
+ if (removed[i] == NULL)
+ continue;
+ if (removed[i]->expose_device)
+ hpsa_remove_device(h, removed[i]);
kfree(removed[i]);
removed[i] = NULL;
}
/* Notify scsi mid layer of any added devices */
for (i = 0; i < nadded; i++) {
- if (!(added[i]->expose_state & HPSA_SCSI_ADD))
+ int rc = 0;
+
+ if (added[i] == NULL)
continue;
- if (scsi_add_device(sh, added[i]->bus,
- added[i]->target, added[i]->lun) == 0)
+ if (!(added[i]->expose_device))
+ continue;
+ rc = hpsa_add_device(h, added[i]);
+ if (!rc)
continue;
- hpsa_show_dev_msg(KERN_WARNING, h, added[i],
- "addition failed, device not added.");
+ dev_warn(&h->pdev->dev,
+ "addition failed %d, device not added.", rc);
/* now we have to remove it from h->dev,
* since it didn't get added to scsi mid layer
*/
fixup_botched_add(h, added[i]);
- added[i] = NULL;
+ h->drv_req_rescan = 1;
}
free_and_out:
@@ -1829,11 +1934,24 @@ static int hpsa_slave_alloc(struct scsi_device *sdev)
h = sdev_to_hba(sdev);
spin_lock_irqsave(&h->devlock, flags);
- sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
- sdev_id(sdev), sdev->lun);
- if (likely(sd)) {
+ if (sdev_channel(sdev) == HPSA_PHYSICAL_DEVICE_BUS) {
+ struct scsi_target *starget;
+ struct sas_rphy *rphy;
+
+ starget = scsi_target(sdev);
+ rphy = target_to_rphy(starget);
+ sd = hpsa_find_device_by_sas_rphy(h, rphy);
+ if (sd) {
+ sd->target = sdev_id(sdev);
+ sd->lun = sdev->lun;
+ }
+ } else
+ sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
+ sdev_id(sdev), sdev->lun);
+
+ if (sd && sd->expose_device) {
atomic_set(&sd->ioaccel_cmds_out, 0);
- sdev->hostdata = (sd->expose_state & HPSA_SCSI_ADD) ? sd : NULL;
+ sdev->hostdata = sd;
} else
sdev->hostdata = NULL;
spin_unlock_irqrestore(&h->devlock, flags);
@@ -1847,7 +1965,7 @@ static int hpsa_slave_configure(struct scsi_device *sdev)
int queue_depth;
sd = sdev->hostdata;
- sdev->no_uld_attach = !sd || !(sd->expose_state & HPSA_ULD_ATTACH);
+ sdev->no_uld_attach = !sd || !sd->expose_device;
if (sd)
queue_depth = sd->queue_depth != 0 ?
@@ -1955,7 +2073,7 @@ static int hpsa_map_ioaccel2_sg_chain_block(struct ctlr_info *h,
u32 chain_size;
chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex];
- chain_size = le32_to_cpu(cp->data_len);
+ chain_size = le32_to_cpu(cp->sg[0].length);
temp64 = pci_map_single(h->pdev, chain_block, chain_size,
PCI_DMA_TODEVICE);
if (dma_mapping_error(&h->pdev->dev, temp64)) {
@@ -1976,7 +2094,7 @@ static void hpsa_unmap_ioaccel2_sg_chain_block(struct ctlr_info *h,
chain_sg = cp->sg;
temp64 = le64_to_cpu(chain_sg->address);
- chain_size = le32_to_cpu(cp->data_len);
+ chain_size = le32_to_cpu(cp->sg[0].length);
pci_unmap_single(h->pdev, temp64, chain_size, PCI_DMA_TODEVICE);
}
@@ -2210,7 +2328,7 @@ static void process_ioaccel2_completion(struct ctlr_info *h,
* the normal I/O path so the controller can handle whatever's
* wrong.
*/
- if (is_logical_dev_addr_mode(dev->scsi3addr) &&
+ if (is_logical_device(dev) &&
c2->error_data.serv_response ==
IOACCEL2_SERV_RESPONSE_FAILURE) {
if (c2->error_data.status ==
@@ -2330,7 +2448,7 @@ static void complete_scsi_command(struct CommandList *cp)
* the normal I/O path so the controller can handle whatever's
* wrong.
*/
- if (is_logical_dev_addr_mode(dev->scsi3addr)) {
+ if (is_logical_device(dev)) {
if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
dev->offload_enabled = 0;
return hpsa_retry_cmd(h, cp);
@@ -2709,9 +2827,8 @@ static int hpsa_send_reset(struct ctlr_info *h, unsigned char *scsi3addr,
/* fill_cmd can't fail here, no data buffer to map. */
- (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
+ (void) fill_cmd(c, reset_type, h, NULL, 0, 0,
scsi3addr, TYPE_MSG);
- c->Request.CDB[1] = reset_type; /* fill_cmd defaults to LUN reset */
rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
if (rc) {
dev_warn(&h->pdev->dev, "Failed to send reset command\n");
@@ -2984,6 +3101,66 @@ out:
return rc;
}
+static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h,
+ unsigned char scsi3addr[], u16 bmic_device_index,
+ struct bmic_sense_subsystem_info *buf, size_t bufsize)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+
+ c = cmd_alloc(h);
+
+ rc = fill_cmd(c, BMIC_SENSE_SUBSYSTEM_INFORMATION, h, buf, bufsize,
+ 0, RAID_CTLR_LUNID, TYPE_CMD);
+ if (rc)
+ goto out;
+
+ c->Request.CDB[2] = bmic_device_index & 0xff;
+ c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ hpsa_scsi_interpret_error(h, c);
+ rc = -1;
+ }
+out:
+ cmd_free(h, c);
+ return rc;
+}
+
+static int hpsa_bmic_id_controller(struct ctlr_info *h,
+ struct bmic_identify_controller *buf, size_t bufsize)
+{
+ int rc = IO_OK;
+ struct CommandList *c;
+ struct ErrorInfo *ei;
+
+ c = cmd_alloc(h);
+
+ rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize,
+ 0, RAID_CTLR_LUNID, TYPE_CMD);
+ if (rc)
+ goto out;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if (rc)
+ goto out;
+ ei = c->err_info;
+ if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
+ hpsa_scsi_interpret_error(h, c);
+ rc = -1;
+ }
+out:
+ cmd_free(h, c);
+ return rc;
+}
+
static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
unsigned char scsi3addr[], u16 bmic_device_index,
struct bmic_identify_physical_device *buf, size_t bufsize)
@@ -3010,9 +3187,71 @@ static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
}
out:
cmd_free(h, c);
+
return rc;
}
+static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h,
+ unsigned char *scsi3addr)
+{
+ struct ReportExtendedLUNdata *physdev;
+ u32 nphysicals;
+ u64 sa = 0;
+ int i;
+
+ physdev = kzalloc(sizeof(*physdev), GFP_KERNEL);
+ if (!physdev)
+ return 0;
+
+ if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
+ dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
+ kfree(physdev);
+ return 0;
+ }
+ nphysicals = get_unaligned_be32(physdev->LUNListLength) / 24;
+
+ for (i = 0; i < nphysicals; i++)
+ if (!memcmp(&physdev->LUN[i].lunid[0], scsi3addr, 8)) {
+ sa = get_unaligned_be64(&physdev->LUN[i].wwid[0]);
+ break;
+ }
+
+ kfree(physdev);
+
+ return sa;
+}
+
+static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr,
+ struct hpsa_scsi_dev_t *dev)
+{
+ int rc;
+ u64 sa = 0;
+
+ if (is_hba_lunid(scsi3addr)) {
+ struct bmic_sense_subsystem_info *ssi;
+
+ ssi = kzalloc(sizeof(*ssi), GFP_KERNEL);
+ if (ssi == NULL) {
+ dev_warn(&h->pdev->dev,
+ "%s: out of memory\n", __func__);
+ return;
+ }
+
+ rc = hpsa_bmic_sense_subsystem_information(h,
+ scsi3addr, 0, ssi, sizeof(*ssi));
+ if (rc == 0) {
+ sa = get_unaligned_be64(ssi->primary_world_wide_id);
+ h->sas_address = sa;
+ }
+
+ kfree(ssi);
+ } else
+ sa = hpsa_get_sas_address_from_report_physical(h, scsi3addr);
+
+ dev->sas_address = sa;
+}
+
+/* Get a device id from inquiry page 0x83 */
static int hpsa_vpd_page_supported(struct ctlr_info *h,
unsigned char scsi3addr[], u8 page)
{
@@ -3097,7 +3336,7 @@ out:
/* Get the device id from inquiry page 0x83 */
static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
- unsigned char *device_id, int buflen)
+ unsigned char *device_id, int index, int buflen)
{
int rc;
unsigned char *buf;
@@ -3109,8 +3348,10 @@ static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
return -ENOMEM;
rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | 0x83, buf, 64);
if (rc == 0)
- memcpy(device_id, &buf[8], buflen);
+ memcpy(device_id, &buf[index], buflen);
+
kfree(buf);
+
return rc != 0;
}
@@ -3339,6 +3580,18 @@ static int hpsa_device_supports_aborts(struct ctlr_info *h,
return rc;
}
+static void sanitize_inquiry_string(unsigned char *s, int len)
+{
+ bool terminated = false;
+
+ for (; len > 0; (--len, ++s)) {
+ if (*s == 0)
+ terminated = true;
+ if (terminated || *s < 0x20 || *s > 0x7e)
+ *s = ' ';
+ }
+}
+
static int hpsa_update_device_info(struct ctlr_info *h,
unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
unsigned char *is_OBDR_device)
@@ -3351,10 +3604,13 @@ static int hpsa_update_device_info(struct ctlr_info *h,
unsigned char *inq_buff;
unsigned char *obdr_sig;
+ int rc = 0;
inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
- if (!inq_buff)
+ if (!inq_buff) {
+ rc = -ENOMEM;
goto bail_out;
+ }
/* Do an inquiry to the device to see what it is. */
if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
@@ -3362,9 +3618,13 @@ static int hpsa_update_device_info(struct ctlr_info *h,
/* Inquiry failed (msg printed already) */
dev_err(&h->pdev->dev,
"hpsa_update_device_info: inquiry failed\n");
+ rc = -EIO;
goto bail_out;
}
+ sanitize_inquiry_string(&inq_buff[8], 8);
+ sanitize_inquiry_string(&inq_buff[16], 16);
+
this_device->devtype = (inq_buff[0] & 0x1f);
memcpy(this_device->scsi3addr, scsi3addr, 8);
memcpy(this_device->vendor, &inq_buff[8],
@@ -3373,7 +3633,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
sizeof(this_device->model));
memset(this_device->device_id, 0,
sizeof(this_device->device_id));
- hpsa_get_device_id(h, scsi3addr, this_device->device_id,
+ hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8,
sizeof(this_device->device_id));
if (this_device->devtype == TYPE_DISK &&
@@ -3411,7 +3671,7 @@ static int hpsa_update_device_info(struct ctlr_info *h,
bail_out:
kfree(inq_buff);
- return 1;
+ return rc;
}
static void hpsa_update_device_supports_aborts(struct ctlr_info *h,
@@ -3439,115 +3699,39 @@ static void hpsa_update_device_supports_aborts(struct ctlr_info *h,
}
}
-static unsigned char *ext_target_model[] = {
- "MSA2012",
- "MSA2024",
- "MSA2312",
- "MSA2324",
- "P2000 G3 SAS",
- "MSA 2040 SAS",
- NULL,
-};
-
-static int is_ext_target(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
-{
- int i;
-
- for (i = 0; ext_target_model[i]; i++)
- if (strncmp(device->model, ext_target_model[i],
- strlen(ext_target_model[i])) == 0)
- return 1;
- return 0;
-}
-
-/* Helper function to assign bus, target, lun mapping of devices.
- * Puts non-external target logical volumes on bus 0, external target logical
- * volumes on bus 1, physical devices on bus 2. and the hba on bus 3.
+/*
+ * Helper function to assign bus, target, lun mapping of devices.
* Logical drive target and lun are assigned at this time, but
* physical device lun and target assignment are deferred (assigned
* in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
- */
+*/
static void figure_bus_target_lun(struct ctlr_info *h,
u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device)
{
- u32 lunid = le32_to_cpu(*((__le32 *) lunaddrbytes));
+ u32 lunid = get_unaligned_le32(lunaddrbytes);
if (!is_logical_dev_addr_mode(lunaddrbytes)) {
/* physical device, target and lun filled in later */
if (is_hba_lunid(lunaddrbytes))
- hpsa_set_bus_target_lun(device, 3, 0, lunid & 0x3fff);
+ hpsa_set_bus_target_lun(device,
+ HPSA_HBA_BUS, 0, lunid & 0x3fff);
else
/* defer target, lun assignment for physical devices */
- hpsa_set_bus_target_lun(device, 2, -1, -1);
+ hpsa_set_bus_target_lun(device,
+ HPSA_PHYSICAL_DEVICE_BUS, -1, -1);
return;
}
/* It's a logical device */
- if (is_ext_target(h, device)) {
- /* external target way, put logicals on bus 1
- * and match target/lun numbers box
- * reports, other smart array, bus 0, target 0, match lunid
- */
+ if (device->external) {
hpsa_set_bus_target_lun(device,
- 1, (lunid >> 16) & 0x3fff, lunid & 0x00ff);
+ HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff,
+ lunid & 0x00ff);
return;
}
- hpsa_set_bus_target_lun(device, 0, 0, lunid & 0x3fff);
+ hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS,
+ 0, lunid & 0x3fff);
}
-/*
- * If there is no lun 0 on a target, linux won't find any devices.
- * For the external targets (arrays), we have to manually detect the enclosure
- * which is at lun zero, as CCISS_REPORT_PHYSICAL_LUNS doesn't report
- * it for some reason. *tmpdevice is the target we're adding,
- * this_device is a pointer into the current element of currentsd[]
- * that we're building up in update_scsi_devices(), below.
- * lunzerobits is a bitmap that tracks which targets already have a
- * lun 0 assigned.
- * Returns 1 if an enclosure was added, 0 if not.
- */
-static int add_ext_target_dev(struct ctlr_info *h,
- struct hpsa_scsi_dev_t *tmpdevice,
- struct hpsa_scsi_dev_t *this_device, u8 *lunaddrbytes,
- unsigned long lunzerobits[], int *n_ext_target_devs)
-{
- unsigned char scsi3addr[8];
-
- if (test_bit(tmpdevice->target, lunzerobits))
- return 0; /* There is already a lun 0 on this target. */
-
- if (!is_logical_dev_addr_mode(lunaddrbytes))
- return 0; /* It's the logical targets that may lack lun 0. */
-
- if (!is_ext_target(h, tmpdevice))
- return 0; /* Only external target devices have this problem. */
-
- if (tmpdevice->lun == 0) /* if lun is 0, then we have a lun 0. */
- return 0;
-
- memset(scsi3addr, 0, 8);
- scsi3addr[3] = tmpdevice->target;
- if (is_hba_lunid(scsi3addr))
- return 0; /* Don't add the RAID controller here. */
-
- if (is_scsi_rev_5(h))
- return 0; /* p1210m doesn't need to do this. */
-
- if (*n_ext_target_devs >= MAX_EXT_TARGETS) {
- dev_warn(&h->pdev->dev, "Maximum number of external "
- "target devices exceeded. Check your hardware "
- "configuration.");
- return 0;
- }
-
- if (hpsa_update_device_info(h, scsi3addr, this_device, NULL))
- return 0;
- (*n_ext_target_devs)++;
- hpsa_set_bus_target_lun(this_device,
- tmpdevice->bus, tmpdevice->target, 0);
- hpsa_update_device_supports_aborts(h, this_device, scsi3addr);
- set_bit(tmpdevice->target, lunzerobits);
- return 1;
-}
/*
* Get address of physical disk used for an ioaccel2 mode command:
@@ -3577,6 +3761,27 @@ static int hpsa_get_pdisk_of_ioaccel2(struct ctlr_info *h,
return 0;
}
+static int figure_external_status(struct ctlr_info *h, int raid_ctlr_position,
+ int i, int nphysicals, int nlocal_logicals)
+{
+ /* In report logicals, local logicals are listed first,
+ * then any externals.
+ */
+ int logicals_start = nphysicals + (raid_ctlr_position == 0);
+
+ if (i == raid_ctlr_position)
+ return 0;
+
+ if (i < logicals_start)
+ return 0;
+
+ /* i is in logicals range, but still within local logicals */
+ if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals)
+ return 0;
+
+ return 1; /* it's an external lun */
+}
+
/*
* Do CISS_REPORT_PHYS and CISS_REPORT_LOG. Data is returned in physdev,
* logdev. The number of luns in physdev and logdev are returned in
@@ -3650,19 +3855,18 @@ static u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position,
/* get physical drive ioaccel handle and queue depth */
static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
struct hpsa_scsi_dev_t *dev,
- u8 *lunaddrbytes,
+ struct ReportExtendedLUNdata *rlep, int rle_index,
struct bmic_identify_physical_device *id_phys)
{
int rc;
- struct ext_report_lun_entry *rle =
- (struct ext_report_lun_entry *) lunaddrbytes;
+ struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
dev->ioaccel_handle = rle->ioaccel_handle;
- if (PHYS_IOACCEL(lunaddrbytes) && dev->ioaccel_handle)
+ if ((rle->device_flags & 0x08) && dev->ioaccel_handle)
dev->hba_ioaccel_enabled = 1;
memset(id_phys, 0, sizeof(*id_phys));
- rc = hpsa_bmic_id_physical_device(h, lunaddrbytes,
- GET_BMIC_DRIVE_NUMBER(lunaddrbytes), id_phys,
+ rc = hpsa_bmic_id_physical_device(h, &rle->lunid[0],
+ GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]), id_phys,
sizeof(*id_phys));
if (!rc)
/* Reserve space for FW operations */
@@ -3673,16 +3877,15 @@ static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
DRIVE_CMDS_RESERVED_FOR_FW;
else
dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */
- atomic_set(&dev->ioaccel_cmds_out, 0);
- atomic_set(&dev->reset_cmds_out, 0);
}
static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device,
- u8 *lunaddrbytes,
+ struct ReportExtendedLUNdata *rlep, int rle_index,
struct bmic_identify_physical_device *id_phys)
{
- if (PHYS_IOACCEL(lunaddrbytes)
- && this_device->ioaccel_handle)
+ struct ext_report_lun_entry *rle = &rlep->LUN[rle_index];
+
+ if ((rle->device_flags & 0x08) && this_device->ioaccel_handle)
this_device->hba_ioaccel_enabled = 1;
memcpy(&this_device->active_path_index,
@@ -3702,7 +3905,33 @@ static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device,
sizeof(this_device->bay));
}
-static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
+/* get number of local logical disks. */
+static int hpsa_set_local_logical_count(struct ctlr_info *h,
+ struct bmic_identify_controller *id_ctlr,
+ u32 *nlocals)
+{
+ int rc;
+
+ if (!id_ctlr) {
+ dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n",
+ __func__);
+ return -ENOMEM;
+ }
+ memset(id_ctlr, 0, sizeof(*id_ctlr));
+ rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr));
+ if (!rc)
+ if (id_ctlr->configured_logical_drive_count < 256)
+ *nlocals = id_ctlr->configured_logical_drive_count;
+ else
+ *nlocals = le16_to_cpu(
+ id_ctlr->extended_logical_unit_count);
+ else
+ *nlocals = -1;
+ return rc;
+}
+
+
+static void hpsa_update_scsi_devices(struct ctlr_info *h)
{
/* the idea here is we could get notified
* that some devices have changed, so we do a report
@@ -3717,13 +3946,16 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
struct ReportExtendedLUNdata *physdev_list = NULL;
struct ReportLUNdata *logdev_list = NULL;
struct bmic_identify_physical_device *id_phys = NULL;
+ struct bmic_identify_controller *id_ctlr = NULL;
u32 nphysicals = 0;
u32 nlogicals = 0;
+ u32 nlocal_logicals = 0;
u32 ndev_allocated = 0;
struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
int ncurrent = 0;
int i, n_ext_target_devs, ndevs_to_allocate;
int raid_ctlr_position;
+ bool physical_device;
DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
@@ -3731,17 +3963,29 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
id_phys = kzalloc(sizeof(*id_phys), GFP_KERNEL);
+ id_ctlr = kzalloc(sizeof(*id_ctlr), GFP_KERNEL);
if (!currentsd || !physdev_list || !logdev_list ||
- !tmpdevice || !id_phys) {
+ !tmpdevice || !id_phys || !id_ctlr) {
dev_err(&h->pdev->dev, "out of memory\n");
goto out;
}
memset(lunzerobits, 0, sizeof(lunzerobits));
+ h->drv_req_rescan = 0; /* cancel scheduled rescan - we're doing it. */
+
if (hpsa_gather_lun_info(h, physdev_list, &nphysicals,
- logdev_list, &nlogicals))
+ logdev_list, &nlogicals)) {
+ h->drv_req_rescan = 1;
goto out;
+ }
+
+ /* Set number of local logicals (non PTRAID) */
+ if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) {
+ dev_warn(&h->pdev->dev,
+ "%s: Can't determine number of local logical devices.\n",
+ __func__);
+ }
/* We might see up to the maximum number of logical and physical disks
* plus external target devices, and a device for the local RAID
@@ -3762,6 +4006,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
if (!currentsd[i]) {
dev_warn(&h->pdev->dev, "out of memory at %s:%d\n",
__FILE__, __LINE__);
+ h->drv_req_rescan = 1;
goto out;
}
ndev_allocated++;
@@ -3776,49 +4021,74 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
n_ext_target_devs = 0;
for (i = 0; i < nphysicals + nlogicals + 1; i++) {
u8 *lunaddrbytes, is_OBDR = 0;
+ int rc = 0;
+ int phys_dev_index = i - (raid_ctlr_position == 0);
+
+ physical_device = i < nphysicals + (raid_ctlr_position == 0);
/* Figure out where the LUN ID info is coming from */
lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
i, nphysicals, nlogicals, physdev_list, logdev_list);
/* skip masked non-disk devices */
- if (MASKED_DEVICE(lunaddrbytes))
- if (i < nphysicals + (raid_ctlr_position == 0) &&
- NON_DISK_PHYS_DEV(lunaddrbytes))
- continue;
+ if (MASKED_DEVICE(lunaddrbytes) && physical_device &&
+ (physdev_list->LUN[phys_dev_index].device_flags & 0x01))
+ continue;
/* Get device type, vendor, model, device id */
- if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
- &is_OBDR))
- continue; /* skip it if we can't talk to it. */
+ rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
+ &is_OBDR);
+ if (rc == -ENOMEM) {
+ dev_warn(&h->pdev->dev,
+ "Out of memory, rescan deferred.\n");
+ h->drv_req_rescan = 1;
+ goto out;
+ }
+ if (rc) {
+ dev_warn(&h->pdev->dev,
+ "Inquiry failed, skipping device.\n");
+ continue;
+ }
+
+ /* Determine if this is a lun from an external target array */
+ tmpdevice->external =
+ figure_external_status(h, raid_ctlr_position, i,
+ nphysicals, nlocal_logicals);
+
figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
hpsa_update_device_supports_aborts(h, tmpdevice, lunaddrbytes);
this_device = currentsd[ncurrent];
- /*
- * For external target devices, we have to insert a LUN 0 which
- * doesn't show up in CCISS_REPORT_PHYSICAL data, but there
- * is nonetheless an enclosure device there. We have to
- * present that otherwise linux won't find anything if
- * there is no lun 0.
+ /* Turn on discovery_polling if there are ext target devices.
+ * Event-based change notification is unreliable for those.
*/
- if (add_ext_target_dev(h, tmpdevice, this_device,
- lunaddrbytes, lunzerobits,
- &n_ext_target_devs)) {
- ncurrent++;
- this_device = currentsd[ncurrent];
+ if (!h->discovery_polling) {
+ if (tmpdevice->external) {
+ h->discovery_polling = 1;
+ dev_info(&h->pdev->dev,
+ "External target, activate discovery polling.\n");
+ }
}
+
*this_device = *tmpdevice;
+ this_device->physical_device = physical_device;
- /* do not expose masked devices */
- if (MASKED_DEVICE(lunaddrbytes) &&
- i < nphysicals + (raid_ctlr_position == 0)) {
- this_device->expose_state = HPSA_DO_NOT_EXPOSE;
- } else {
- this_device->expose_state =
- HPSA_SG_ATTACH | HPSA_ULD_ATTACH;
- }
+ /*
+ * Expose all devices except for physical devices that
+ * are masked.
+ */
+ if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device)
+ this_device->expose_device = 0;
+ else
+ this_device->expose_device = 1;
+
+
+ /*
+ * Get the SAS address for physical devices that are exposed.
+ */
+ if (this_device->physical_device && this_device->expose_device)
+ hpsa_get_sas_address(h, lunaddrbytes, this_device);
switch (this_device->devtype) {
case TYPE_ROM:
@@ -3833,14 +4103,14 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
ncurrent++;
break;
case TYPE_DISK:
- if (i < nphysicals + (raid_ctlr_position == 0)) {
+ if (this_device->physical_device) {
/* The disk is in HBA mode. */
/* Never use RAID mapper in HBA mode. */
this_device->offload_enabled = 0;
hpsa_get_ioaccel_drive_info(h, this_device,
- lunaddrbytes, id_phys);
- hpsa_get_path_info(this_device, lunaddrbytes,
- id_phys);
+ physdev_list, phys_dev_index, id_phys);
+ hpsa_get_path_info(this_device,
+ physdev_list, phys_dev_index, id_phys);
}
ncurrent++;
break;
@@ -3865,7 +4135,19 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno)
if (ncurrent >= HPSA_MAX_DEVICES)
break;
}
- adjust_hpsa_scsi_table(h, hostno, currentsd, ncurrent);
+
+ if (h->sas_host == NULL) {
+ int rc = 0;
+
+ rc = hpsa_add_sas_host(h);
+ if (rc) {
+ dev_warn(&h->pdev->dev,
+ "Could not add sas host %d\n", rc);
+ goto out;
+ }
+ }
+
+ adjust_hpsa_scsi_table(h, currentsd, ncurrent);
out:
kfree(tmpdevice);
for (i = 0; i < ndev_allocated; i++)
@@ -3873,6 +4155,7 @@ out:
kfree(currentsd);
kfree(physdev_list);
kfree(logdev_list);
+ kfree(id_ctlr);
kfree(id_phys);
}
@@ -3978,19 +4261,14 @@ static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len)
case READ_6:
case READ_12:
if (*cdb_len == 6) {
- block = (((u32) cdb[2]) << 8) | cdb[3];
+ block = get_unaligned_be16(&cdb[2]);
block_cnt = cdb[4];
+ if (block_cnt == 0)
+ block_cnt = 256;
} else {
BUG_ON(*cdb_len != 12);
- block = (((u32) cdb[2]) << 24) |
- (((u32) cdb[3]) << 16) |
- (((u32) cdb[4]) << 8) |
- cdb[5];
- block_cnt =
- (((u32) cdb[6]) << 24) |
- (((u32) cdb[7]) << 16) |
- (((u32) cdb[8]) << 8) |
- cdb[9];
+ block = get_unaligned_be32(&cdb[2]);
+ block_cnt = get_unaligned_be32(&cdb[6]);
}
if (block_cnt > 0xffff)
return IO_ACCEL_INELIGIBLE;
@@ -4272,6 +4550,7 @@ static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
/* fill in sg elements */
if (use_sg > h->ioaccel_maxsg) {
cp->sg_count = 1;
+ cp->sg[0].length = cpu_to_le32(use_sg * sizeof(cp->sg[0]));
if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) {
atomic_dec(&phys_disk->ioaccel_cmds_out);
scsi_dma_unmap(cmd);
@@ -4376,9 +4655,7 @@ static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
case WRITE_6:
is_write = 1;
case READ_6:
- first_block =
- (((u64) cmd->cmnd[2]) << 8) |
- cmd->cmnd[3];
+ first_block = get_unaligned_be16(&cmd->cmnd[2]);
block_cnt = cmd->cmnd[4];
if (block_cnt == 0)
block_cnt = 256;
@@ -4947,7 +5224,7 @@ static void hpsa_scan_start(struct Scsi_Host *sh)
if (unlikely(lockup_detected(h)))
return hpsa_scan_complete(h);
- hpsa_update_scsi_devices(h, h->scsi_host->host_no);
+ hpsa_update_scsi_devices(h);
hpsa_scan_complete(h);
}
@@ -5000,6 +5277,7 @@ static int hpsa_scsi_host_alloc(struct ctlr_info *h)
sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
sh->cmd_per_lun = sh->can_queue;
sh->sg_tablesize = h->maxsgentries;
+ sh->transportt = hpsa_sas_transport_template;
sh->hostdata[0] = (unsigned long) h;
sh->irq = h->intr[h->intr_mode];
sh->unique_id = sh->irq;
@@ -5159,6 +5437,7 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
int rc;
struct ctlr_info *h;
struct hpsa_scsi_dev_t *dev;
+ u8 reset_type;
char msg[48];
/* find the controller to which the command to be aborted was sent */
@@ -5197,14 +5476,25 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
if (is_hba_lunid(dev->scsi3addr))
return SUCCESS;
- hpsa_show_dev_msg(KERN_WARNING, h, dev, "resetting");
+ if (is_logical_dev_addr_mode(dev->scsi3addr))
+ reset_type = HPSA_DEVICE_RESET_MSG;
+ else
+ reset_type = HPSA_PHYS_TARGET_RESET;
+
+ sprintf(msg, "resetting %s",
+ reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ");
+ hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
+
+ h->reset_in_progress = 1;
/* send a reset to the SCSI LUN which the command was sent to */
- rc = hpsa_do_reset(h, dev, dev->scsi3addr, HPSA_RESET_TYPE_LUN,
+ rc = hpsa_do_reset(h, dev, dev->scsi3addr, reset_type,
DEFAULT_REPLY_QUEUE);
- snprintf(msg, sizeof(msg), "reset %s",
- rc == 0 ? "completed successfully" : "failed");
+ sprintf(msg, "reset %s %s",
+ reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ",
+ rc == 0 ? "completed successfully" : "failed");
hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
+ h->reset_in_progress = 0;
return rc == 0 ? SUCCESS : FAILED;
}
@@ -6262,6 +6552,24 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.CDB[8] = (size >> 8) & 0xFF;
c->Request.CDB[9] = size & 0xFF;
break;
+ case BMIC_SENSE_DIAG_OPTIONS:
+ c->Request.CDBLen = 16;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ /* Spec says this should be BMIC_WRITE */
+ c->Request.CDB[0] = BMIC_READ;
+ c->Request.CDB[6] = BMIC_SENSE_DIAG_OPTIONS;
+ break;
+ case BMIC_SET_DIAG_OPTIONS:
+ c->Request.CDBLen = 16;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type,
+ ATTR_SIMPLE, XFER_WRITE);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_WRITE;
+ c->Request.CDB[6] = BMIC_SET_DIAG_OPTIONS;
+ break;
case HPSA_CACHE_FLUSH:
c->Request.CDBLen = 12;
c->Request.type_attr_dir =
@@ -6311,6 +6619,32 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
c->Request.CDB[7] = (size >> 16) & 0xFF;
c->Request.CDB[8] = (size >> 8) & 0XFF;
break;
+ case BMIC_SENSE_SUBSYSTEM_INFORMATION:
+ c->Request.CDBLen = 10;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_READ;
+ c->Request.CDB[6] = BMIC_SENSE_SUBSYSTEM_INFORMATION;
+ c->Request.CDB[7] = (size >> 16) & 0xFF;
+ c->Request.CDB[8] = (size >> 8) & 0XFF;
+ break;
+ case BMIC_IDENTIFY_CONTROLLER:
+ c->Request.CDBLen = 10;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
+ c->Request.Timeout = 0;
+ c->Request.CDB[0] = BMIC_READ;
+ c->Request.CDB[1] = 0;
+ c->Request.CDB[2] = 0;
+ c->Request.CDB[3] = 0;
+ c->Request.CDB[4] = 0;
+ c->Request.CDB[5] = 0;
+ c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER;
+ c->Request.CDB[7] = (size >> 16) & 0xFF;
+ c->Request.CDB[8] = (size >> 8) & 0XFF;
+ c->Request.CDB[9] = 0;
+ break;
default:
dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
BUG();
@@ -6319,6 +6653,20 @@ static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
} else if (cmd_type == TYPE_MSG) {
switch (cmd) {
+ case HPSA_PHYS_TARGET_RESET:
+ c->Request.CDBLen = 16;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
+ c->Request.Timeout = 0; /* Don't time out */
+ memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
+ c->Request.CDB[0] = HPSA_RESET;
+ c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE;
+ /* Physical target reset needs no control bytes 4-7*/
+ c->Request.CDB[4] = 0x00;
+ c->Request.CDB[5] = 0x00;
+ c->Request.CDB[6] = 0x00;
+ c->Request.CDB[7] = 0x00;
+ break;
case HPSA_DEVICE_RESET_MSG:
c->Request.CDBLen = 16;
c->Request.type_attr_dir =
@@ -6432,16 +6780,6 @@ static inline void finish_cmd(struct CommandList *c)
complete(c->waiting);
}
-
-static inline u32 hpsa_tag_discard_error_bits(struct ctlr_info *h, u32 tag)
-{
-#define HPSA_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1)
-#define HPSA_SIMPLE_ERROR_BITS 0x03
- if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
- return tag & ~HPSA_SIMPLE_ERROR_BITS;
- return tag & ~HPSA_PERF_ERROR_BITS;
-}
-
/* process completion of an indexed ("direct lookup") command */
static inline void process_indexed_cmd(struct ctlr_info *h,
u32 raw_tag)
@@ -7852,6 +8190,11 @@ static void hpsa_ack_ctlr_events(struct ctlr_info *h)
*/
static int hpsa_ctlr_needs_rescan(struct ctlr_info *h)
{
+ if (h->drv_req_rescan) {
+ h->drv_req_rescan = 0;
+ return 1;
+ }
+
if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
return 0;
@@ -7885,6 +8228,41 @@ static int hpsa_offline_devices_ready(struct ctlr_info *h)
return 0;
}
+static int hpsa_luns_changed(struct ctlr_info *h)
+{
+ int rc = 1; /* assume there are changes */
+ struct ReportLUNdata *logdev = NULL;
+
+ /* if we can't find out if lun data has changed,
+ * assume that it has.
+ */
+
+ if (!h->lastlogicals)
+ goto out;
+
+ logdev = kzalloc(sizeof(*logdev), GFP_KERNEL);
+ if (!logdev) {
+ dev_warn(&h->pdev->dev,
+ "Out of memory, can't track lun changes.\n");
+ goto out;
+ }
+ if (hpsa_scsi_do_report_luns(h, 1, logdev, sizeof(*logdev), 0)) {
+ dev_warn(&h->pdev->dev,
+ "report luns failed, can't track lun changes.\n");
+ goto out;
+ }
+ if (memcmp(logdev, h->lastlogicals, sizeof(*logdev))) {
+ dev_info(&h->pdev->dev,
+ "Lun changes detected.\n");
+ memcpy(h->lastlogicals, logdev, sizeof(*logdev));
+ goto out;
+ } else
+ rc = 0; /* no changes detected. */
+out:
+ kfree(logdev);
+ return rc;
+}
+
static void hpsa_rescan_ctlr_worker(struct work_struct *work)
{
unsigned long flags;
@@ -7900,6 +8278,19 @@ static void hpsa_rescan_ctlr_worker(struct work_struct *work)
hpsa_ack_ctlr_events(h);
hpsa_scan_start(h->scsi_host);
scsi_host_put(h->scsi_host);
+ } else if (h->discovery_polling) {
+ hpsa_disable_rld_caching(h);
+ if (hpsa_luns_changed(h)) {
+ struct Scsi_Host *sh = NULL;
+
+ dev_info(&h->pdev->dev,
+ "driver discovery polling rescan.\n");
+ sh = scsi_host_get(h->scsi_host);
+ if (sh != NULL) {
+ hpsa_scan_start(sh);
+ scsi_host_put(sh);
+ }
+ }
}
spin_lock_irqsave(&h->lock, flags);
if (!h->remove_in_progress)
@@ -8140,6 +8531,8 @@ reinit_after_soft_reset:
/* Enable Accelerated IO path at driver layer */
h->acciopath_status = 1;
+ /* Disable discovery polling.*/
+ h->discovery_polling = 0;
/* Turn the interrupts on so we can service requests */
@@ -8147,6 +8540,11 @@ reinit_after_soft_reset:
hpsa_hba_inquiry(h);
+ h->lastlogicals = kzalloc(sizeof(*(h->lastlogicals)), GFP_KERNEL);
+ if (!h->lastlogicals)
+ dev_info(&h->pdev->dev,
+ "Can't track change to report lun data\n");
+
/* Monitor the controller for firmware lockups */
h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
@@ -8219,6 +8617,71 @@ out:
kfree(flush_buf);
}
+/* Make controller gather fresh report lun data each time we
+ * send down a report luns request
+ */
+static void hpsa_disable_rld_caching(struct ctlr_info *h)
+{
+ u32 *options;
+ struct CommandList *c;
+ int rc;
+
+ /* Don't bother trying to set diag options if locked up */
+ if (unlikely(h->lockup_detected))
+ return;
+
+ options = kzalloc(sizeof(*options), GFP_KERNEL);
+ if (!options) {
+ dev_err(&h->pdev->dev,
+ "Error: failed to disable rld caching, during alloc.\n");
+ return;
+ }
+
+ c = cmd_alloc(h);
+
+ /* first, get the current diag options settings */
+ if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
+ RAID_CTLR_LUNID, TYPE_CMD))
+ goto errout;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if ((rc != 0) || (c->err_info->CommandStatus != 0))
+ goto errout;
+
+ /* Now, set the bit for disabling the RLD caching */
+ *options |= HPSA_DIAG_OPTS_DISABLE_RLD_CACHING;
+
+ if (fill_cmd(c, BMIC_SET_DIAG_OPTIONS, h, options, 4, 0,
+ RAID_CTLR_LUNID, TYPE_CMD))
+ goto errout;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_TODEVICE, NO_TIMEOUT);
+ if ((rc != 0) || (c->err_info->CommandStatus != 0))
+ goto errout;
+
+ /* Now verify that it got set: */
+ if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
+ RAID_CTLR_LUNID, TYPE_CMD))
+ goto errout;
+
+ rc = hpsa_scsi_do_simple_cmd_with_retry(h, c,
+ PCI_DMA_FROMDEVICE, NO_TIMEOUT);
+ if ((rc != 0) || (c->err_info->CommandStatus != 0))
+ goto errout;
+
+ if (*options && HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
+ goto out;
+
+errout:
+ dev_err(&h->pdev->dev,
+ "Error: failed to disable report lun data caching.\n");
+out:
+ cmd_free(h, c);
+ kfree(options);
+}
+
static void hpsa_shutdown(struct pci_dev *pdev)
{
struct ctlr_info *h;
@@ -8284,6 +8747,7 @@ static void hpsa_remove_one(struct pci_dev *pdev)
hpsa_free_performant_mode(h); /* init_one 7 */
hpsa_free_sg_chain_blocks(h); /* init_one 6 */
hpsa_free_cmd_pool(h); /* init_one 5 */
+ kfree(h->lastlogicals);
/* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */
@@ -8296,6 +8760,9 @@ static void hpsa_remove_one(struct pci_dev *pdev)
free_percpu(h->lockup_detected); /* init_one 2 */
h->lockup_detected = NULL; /* init_one 2 */
/* (void) pci_disable_pcie_error_reporting(pdev); */ /* init_one 1 */
+
+ hpsa_delete_sas_host(h);
+
kfree(h); /* init_one 1 */
}
@@ -8758,18 +9225,369 @@ static void hpsa_drain_accel_commands(struct ctlr_info *h)
} while (1);
}
+static struct hpsa_sas_phy *hpsa_alloc_sas_phy(
+ struct hpsa_sas_port *hpsa_sas_port)
+{
+ struct hpsa_sas_phy *hpsa_sas_phy;
+ struct sas_phy *phy;
+
+ hpsa_sas_phy = kzalloc(sizeof(*hpsa_sas_phy), GFP_KERNEL);
+ if (!hpsa_sas_phy)
+ return NULL;
+
+ phy = sas_phy_alloc(hpsa_sas_port->parent_node->parent_dev,
+ hpsa_sas_port->next_phy_index);
+ if (!phy) {
+ kfree(hpsa_sas_phy);
+ return NULL;
+ }
+
+ hpsa_sas_port->next_phy_index++;
+ hpsa_sas_phy->phy = phy;
+ hpsa_sas_phy->parent_port = hpsa_sas_port;
+
+ return hpsa_sas_phy;
+}
+
+static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy)
+{
+ struct sas_phy *phy = hpsa_sas_phy->phy;
+
+ sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
+ sas_phy_free(phy);
+ if (hpsa_sas_phy->added_to_port)
+ list_del(&hpsa_sas_phy->phy_list_entry);
+ kfree(hpsa_sas_phy);
+}
+
+static int hpsa_sas_port_add_phy(struct hpsa_sas_phy *hpsa_sas_phy)
+{
+ int rc;
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct sas_phy *phy;
+ struct sas_identify *identify;
+
+ hpsa_sas_port = hpsa_sas_phy->parent_port;
+ phy = hpsa_sas_phy->phy;
+
+ identify = &phy->identify;
+ memset(identify, 0, sizeof(*identify));
+ identify->sas_address = hpsa_sas_port->sas_address;
+ identify->device_type = SAS_END_DEVICE;
+ identify->initiator_port_protocols = SAS_PROTOCOL_STP;
+ identify->target_port_protocols = SAS_PROTOCOL_STP;
+ phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+ phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
+ phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
+ phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;
+
+ rc = sas_phy_add(hpsa_sas_phy->phy);
+ if (rc)
+ return rc;
+
+ sas_port_add_phy(hpsa_sas_port->port, hpsa_sas_phy->phy);
+ list_add_tail(&hpsa_sas_phy->phy_list_entry,
+ &hpsa_sas_port->phy_list_head);
+ hpsa_sas_phy->added_to_port = true;
+
+ return 0;
+}
+
+static int
+ hpsa_sas_port_add_rphy(struct hpsa_sas_port *hpsa_sas_port,
+ struct sas_rphy *rphy)
+{
+ struct sas_identify *identify;
+
+ identify = &rphy->identify;
+ identify->sas_address = hpsa_sas_port->sas_address;
+ identify->initiator_port_protocols = SAS_PROTOCOL_STP;
+ identify->target_port_protocols = SAS_PROTOCOL_STP;
+
+ return sas_rphy_add(rphy);
+}
+
+static struct hpsa_sas_port
+ *hpsa_alloc_sas_port(struct hpsa_sas_node *hpsa_sas_node,
+ u64 sas_address)
+{
+ int rc;
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct sas_port *port;
+
+ hpsa_sas_port = kzalloc(sizeof(*hpsa_sas_port), GFP_KERNEL);
+ if (!hpsa_sas_port)
+ return NULL;
+
+ INIT_LIST_HEAD(&hpsa_sas_port->phy_list_head);
+ hpsa_sas_port->parent_node = hpsa_sas_node;
+
+ port = sas_port_alloc_num(hpsa_sas_node->parent_dev);
+ if (!port)
+ goto free_hpsa_port;
+
+ rc = sas_port_add(port);
+ if (rc)
+ goto free_sas_port;
+
+ hpsa_sas_port->port = port;
+ hpsa_sas_port->sas_address = sas_address;
+ list_add_tail(&hpsa_sas_port->port_list_entry,
+ &hpsa_sas_node->port_list_head);
+
+ return hpsa_sas_port;
+
+free_sas_port:
+ sas_port_free(port);
+free_hpsa_port:
+ kfree(hpsa_sas_port);
+
+ return NULL;
+}
+
+static void hpsa_free_sas_port(struct hpsa_sas_port *hpsa_sas_port)
+{
+ struct hpsa_sas_phy *hpsa_sas_phy;
+ struct hpsa_sas_phy *next;
+
+ list_for_each_entry_safe(hpsa_sas_phy, next,
+ &hpsa_sas_port->phy_list_head, phy_list_entry)
+ hpsa_free_sas_phy(hpsa_sas_phy);
+
+ sas_port_delete(hpsa_sas_port->port);
+ list_del(&hpsa_sas_port->port_list_entry);
+ kfree(hpsa_sas_port);
+}
+
+static struct hpsa_sas_node *hpsa_alloc_sas_node(struct device *parent_dev)
+{
+ struct hpsa_sas_node *hpsa_sas_node;
+
+ hpsa_sas_node = kzalloc(sizeof(*hpsa_sas_node), GFP_KERNEL);
+ if (hpsa_sas_node) {
+ hpsa_sas_node->parent_dev = parent_dev;
+ INIT_LIST_HEAD(&hpsa_sas_node->port_list_head);
+ }
+
+ return hpsa_sas_node;
+}
+
+static void hpsa_free_sas_node(struct hpsa_sas_node *hpsa_sas_node)
+{
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct hpsa_sas_port *next;
+
+ if (!hpsa_sas_node)
+ return;
+
+ list_for_each_entry_safe(hpsa_sas_port, next,
+ &hpsa_sas_node->port_list_head, port_list_entry)
+ hpsa_free_sas_port(hpsa_sas_port);
+
+ kfree(hpsa_sas_node);
+}
+
+static struct hpsa_scsi_dev_t
+ *hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
+ struct sas_rphy *rphy)
+{
+ int i;
+ struct hpsa_scsi_dev_t *device;
+
+ for (i = 0; i < h->ndevices; i++) {
+ device = h->dev[i];
+ if (!device->sas_port)
+ continue;
+ if (device->sas_port->rphy == rphy)
+ return device;
+ }
+
+ return NULL;
+}
+
+static int hpsa_add_sas_host(struct ctlr_info *h)
+{
+ int rc;
+ struct device *parent_dev;
+ struct hpsa_sas_node *hpsa_sas_node;
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct hpsa_sas_phy *hpsa_sas_phy;
+
+ parent_dev = &h->scsi_host->shost_gendev;
+
+ hpsa_sas_node = hpsa_alloc_sas_node(parent_dev);
+ if (!hpsa_sas_node)
+ return -ENOMEM;
+
+ hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, h->sas_address);
+ if (!hpsa_sas_port) {
+ rc = -ENODEV;
+ goto free_sas_node;
+ }
+
+ hpsa_sas_phy = hpsa_alloc_sas_phy(hpsa_sas_port);
+ if (!hpsa_sas_phy) {
+ rc = -ENODEV;
+ goto free_sas_port;
+ }
+
+ rc = hpsa_sas_port_add_phy(hpsa_sas_phy);
+ if (rc)
+ goto free_sas_phy;
+
+ h->sas_host = hpsa_sas_node;
+
+ return 0;
+
+free_sas_phy:
+ hpsa_free_sas_phy(hpsa_sas_phy);
+free_sas_port:
+ hpsa_free_sas_port(hpsa_sas_port);
+free_sas_node:
+ hpsa_free_sas_node(hpsa_sas_node);
+
+ return rc;
+}
+
+static void hpsa_delete_sas_host(struct ctlr_info *h)
+{
+ hpsa_free_sas_node(h->sas_host);
+}
+
+static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
+ struct hpsa_scsi_dev_t *device)
+{
+ int rc;
+ struct hpsa_sas_port *hpsa_sas_port;
+ struct sas_rphy *rphy;
+
+ hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, device->sas_address);
+ if (!hpsa_sas_port)
+ return -ENOMEM;
+
+ rphy = sas_end_device_alloc(hpsa_sas_port->port);
+ if (!rphy) {
+ rc = -ENODEV;
+ goto free_sas_port;
+ }
+
+ hpsa_sas_port->rphy = rphy;
+ device->sas_port = hpsa_sas_port;
+
+ rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy);
+ if (rc)
+ goto free_sas_port;
+
+ return 0;
+
+free_sas_port:
+ hpsa_free_sas_port(hpsa_sas_port);
+ device->sas_port = NULL;
+
+ return rc;
+}
+
+static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device)
+{
+ if (device->sas_port) {
+ hpsa_free_sas_port(device->sas_port);
+ device->sas_port = NULL;
+ }
+}
+
+static int
+hpsa_sas_get_linkerrors(struct sas_phy *phy)
+{
+ return 0;
+}
+
+static int
+hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
+{
+ return 0;
+}
+
+static int
+hpsa_sas_get_bay_identifier(struct sas_rphy *rphy)
+{
+ return -ENXIO;
+}
+
+static int
+hpsa_sas_phy_reset(struct sas_phy *phy, int hard_reset)
+{
+ return 0;
+}
+
+static int
+hpsa_sas_phy_enable(struct sas_phy *phy, int enable)
+{
+ return 0;
+}
+
+static int
+hpsa_sas_phy_setup(struct sas_phy *phy)
+{
+ return 0;
+}
+
+static void
+hpsa_sas_phy_release(struct sas_phy *phy)
+{
+}
+
+static int
+hpsa_sas_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
+{
+ return -EINVAL;
+}
+
+/* SMP = Serial Management Protocol */
+static int
+hpsa_sas_smp_handler(struct Scsi_Host *shost, struct sas_rphy *rphy,
+struct request *req)
+{
+ return -EINVAL;
+}
+
+static struct sas_function_template hpsa_sas_transport_functions = {
+ .get_linkerrors = hpsa_sas_get_linkerrors,
+ .get_enclosure_identifier = hpsa_sas_get_enclosure_identifier,
+ .get_bay_identifier = hpsa_sas_get_bay_identifier,
+ .phy_reset = hpsa_sas_phy_reset,
+ .phy_enable = hpsa_sas_phy_enable,
+ .phy_setup = hpsa_sas_phy_setup,
+ .phy_release = hpsa_sas_phy_release,
+ .set_phy_speed = hpsa_sas_phy_speed,
+ .smp_handler = hpsa_sas_smp_handler,
+};
+
/*
* This is it. Register the PCI driver information for the cards we control
* the OS will call our registered routines when it finds one of our cards.
*/
static int __init hpsa_init(void)
{
- return pci_register_driver(&hpsa_pci_driver);
+ int rc;
+
+ hpsa_sas_transport_template =
+ sas_attach_transport(&hpsa_sas_transport_functions);
+ if (!hpsa_sas_transport_template)
+ return -ENODEV;
+
+ rc = pci_register_driver(&hpsa_pci_driver);
+
+ if (rc)
+ sas_release_transport(hpsa_sas_transport_template);
+
+ return rc;
}
static void __exit hpsa_cleanup(void)
{
pci_unregister_driver(&hpsa_pci_driver);
+ sas_release_transport(hpsa_sas_transport_template);
}
static void __attribute__((unused)) verify_offsets(void)