diff options
Diffstat (limited to 'drivers/scsi/isci/phy.h')
| -rw-r--r-- | drivers/scsi/isci/phy.h | 504 |
1 files changed, 504 insertions, 0 deletions
diff --git a/drivers/scsi/isci/phy.h b/drivers/scsi/isci/phy.h new file mode 100644 index 000000000000..67699c8e321c --- /dev/null +++ b/drivers/scsi/isci/phy.h @@ -0,0 +1,504 @@ +/* + * This file is provided under a dual BSD/GPLv2 license. When using or + * redistributing this file, you may do so under either license. + * + * GPL LICENSE SUMMARY + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * The full GNU General Public License is included in this distribution + * in the file called LICENSE.GPL. + * + * BSD LICENSE + * + * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Intel Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef _ISCI_PHY_H_ +#define _ISCI_PHY_H_ + +#include <scsi/sas.h> +#include <scsi/libsas.h> +#include "isci.h" +#include "sas.h" + +/* This is the timeout value for the SATA phy to wait for a SIGNATURE FIS + * before restarting the starting state machine. Technically, the old parallel + * ATA specification required up to 30 seconds for a device to issue its + * signature FIS as a result of a soft reset. Now we see that devices respond + * generally within 15 seconds, but we'll use 25 for now. + */ +#define SCIC_SDS_SIGNATURE_FIS_TIMEOUT 25000 + +/* This is the timeout for the SATA OOB/SN because the hardware does not + * recognize a hot plug after OOB signal but before the SN signals. We need to + * make sure after a hotplug timeout if we have not received the speed event + * notification from the hardware that we restart the hardware OOB state + * machine. + */ +#define SCIC_SDS_SATA_LINK_TRAINING_TIMEOUT 250 + +enum sci_phy_protocol { + SCIC_SDS_PHY_PROTOCOL_UNKNOWN, + SCIC_SDS_PHY_PROTOCOL_SAS, + SCIC_SDS_PHY_PROTOCOL_SATA, + SCIC_SDS_MAX_PHY_PROTOCOLS +}; + +/** + * isci_phy - hba local phy infrastructure + * @sm: + * @protocol: attached device protocol + * @phy_index: physical index relative to the controller (0-3) + * @bcn_received_while_port_unassigned: bcn to report after port association + * @sata_timer: timeout SATA signature FIS arrival + */ +struct isci_phy { + struct sci_base_state_machine sm; + struct isci_port *owning_port; + enum sas_linkrate max_negotiated_speed; + enum sci_phy_protocol protocol; + u8 phy_index; + bool bcn_received_while_port_unassigned; + bool is_in_link_training; + struct sci_timer sata_timer; + struct scu_transport_layer_registers __iomem *transport_layer_registers; + struct scu_link_layer_registers __iomem *link_layer_registers; + struct asd_sas_phy sas_phy; + struct isci_port *isci_port; + u8 sas_addr[SAS_ADDR_SIZE]; + union { + struct sas_identify_frame iaf; + struct dev_to_host_fis fis; + } frame_rcvd; +}; + +static inline struct isci_phy *to_iphy(struct asd_sas_phy *sas_phy) +{ + struct isci_phy *iphy = container_of(sas_phy, typeof(*iphy), sas_phy); + + return iphy; +} + +struct sci_phy_cap { + union { + struct { + /* + * The SAS specification indicates the start bit shall + * always be set to + * 1. This implementation will have the start bit set + * to 0 if the PHY CAPABILITIES were either not + * received or speed negotiation failed. + */ + u8 start:1; + u8 tx_ssc_type:1; + u8 res1:2; + u8 req_logical_linkrate:4; + + u32 gen1_no_ssc:1; + u32 gen1_ssc:1; + u32 gen2_no_ssc:1; + u32 gen2_ssc:1; + u32 gen3_no_ssc:1; + u32 gen3_ssc:1; + u32 res2:17; + u32 parity:1; + }; + u32 all; + }; +} __packed; + +/* this data structure reflects the link layer transmit identification reg */ +struct sci_phy_proto { + union { + struct { + u16 _r_a:1; + u16 smp_iport:1; + u16 stp_iport:1; + u16 ssp_iport:1; + u16 _r_b:4; + u16 _r_c:1; + u16 smp_tport:1; + u16 stp_tport:1; + u16 ssp_tport:1; + u16 _r_d:4; + }; + u16 all; + }; +} __packed; + + +/** + * struct sci_phy_properties - This structure defines the properties common to + * all phys that can be retrieved. + * + * + */ +struct sci_phy_properties { + /** + * This field specifies the port that currently contains the + * supplied phy. This field may be set to NULL + * if the phy is not currently contained in a port. + */ + struct isci_port *iport; + + /** + * This field specifies the link rate at which the phy is + * currently operating. + */ + enum sas_linkrate negotiated_link_rate; + + /** + * This field specifies the index of the phy in relation to other + * phys within the controller. This index is zero relative. + */ + u8 index; +}; + +/** + * struct sci_sas_phy_properties - This structure defines the properties, + * specific to a SAS phy, that can be retrieved. + * + * + */ +struct sci_sas_phy_properties { + /** + * This field delineates the Identify Address Frame received + * from the remote end point. + */ + struct sas_identify_frame rcvd_iaf; + + /** + * This field delineates the Phy capabilities structure received + * from the remote end point. + */ + struct sci_phy_cap rcvd_cap; + +}; + +/** + * struct sci_sata_phy_properties - This structure defines the properties, + * specific to a SATA phy, that can be retrieved. + * + * + */ +struct sci_sata_phy_properties { + /** + * This field delineates the signature FIS received from the + * attached target. + */ + struct dev_to_host_fis signature_fis; + + /** + * This field specifies to the user if a port selector is connected + * on the specified phy. + */ + bool is_port_selector_present; + +}; + +/** + * enum sci_phy_counter_id - This enumeration depicts the various pieces of + * optional information that can be retrieved for a specific phy. + * + * + */ +enum sci_phy_counter_id { + /** + * This PHY information field tracks the number of frames received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME, + + /** + * This PHY information field tracks the number of frames transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME, + + /** + * This PHY information field tracks the number of DWORDs received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WORD, + + /** + * This PHY information field tracks the number of DWORDs transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_FRAME_DWORD, + + /** + * This PHY information field tracks the number of times DWORD + * synchronization was lost. + */ + SCIC_PHY_COUNTER_LOSS_OF_SYNC_ERROR, + + /** + * This PHY information field tracks the number of received DWORDs with + * running disparity errors. + */ + SCIC_PHY_COUNTER_RECEIVED_DISPARITY_ERROR, + + /** + * This PHY information field tracks the number of received frames with a + * CRC error (not including short or truncated frames). + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_CRC_ERROR, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (ACK/NAK TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_ACK_NAK_TIMEOUT, + + /** + * This PHY information field tracks the number of times the inactivity + * timer for connections on the phy has been utilized. + */ + SCIC_PHY_COUNTER_INACTIVITY_TIMER_EXPIRED, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives received. + */ + SCIC_PHY_COUNTER_RECEIVED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of DONE (CREDIT TIMEOUT) + * primitives transmitted. + */ + SCIC_PHY_COUNTER_TRANSMITTED_DONE_CREDIT_TIMEOUT, + + /** + * This PHY information field tracks the number of CREDIT BLOCKED + * primitives received. + * @note Depending on remote device implementation, credit blocks + * may occur regularly. + */ + SCIC_PHY_COUNTER_RECEIVED_CREDIT_BLOCKED, + + /** + * This PHY information field contains the number of short frames + * received. A short frame is simply a frame smaller then what is + * allowed by either the SAS or SATA specification. + */ + SCIC_PHY_COUNTER_RECEIVED_SHORT_FRAME, + + /** + * This PHY information field contains the number of frames received after + * credit has been exhausted. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_WITHOUT_CREDIT, + + /** + * This PHY information field contains the number of frames received after + * a DONE has been received. + */ + SCIC_PHY_COUNTER_RECEIVED_FRAME_AFTER_DONE, + + /** + * This PHY information field contains the number of times the phy + * failed to achieve DWORD synchronization during speed negotiation. + */ + SCIC_PHY_COUNTER_SN_DWORD_SYNC_ERROR +}; + +enum sci_phy_states { + /** + * Simply the initial state for the base domain state machine. + */ + SCI_PHY_INITIAL, + + /** + * This state indicates that the phy has successfully been stopped. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the INITIAL state. + * This state is entered from the STARTING state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_PHY_STOPPED, + + /** + * This state indicates that the phy is in the process of becomming + * ready. In this state no new IO operations are permitted on this phy. + * This state is entered from the STOPPED state. + * This state is entered from the READY state. + * This state is entered from the RESETTING state. + */ + SCI_PHY_STARTING, + + /** + * Initial state + */ + SCI_PHY_SUB_INITIAL, + + /** + * Wait state for the hardware OSSP event type notification + */ + SCI_PHY_SUB_AWAIT_OSSP_EN, + + /** + * Wait state for the PHY speed notification + */ + SCI_PHY_SUB_AWAIT_SAS_SPEED_EN, + + /** + * Wait state for the IAF Unsolicited frame notification + */ + SCI_PHY_SUB_AWAIT_IAF_UF, + + /** + * Wait state for the request to consume power + */ + SCI_PHY_SUB_AWAIT_SAS_POWER, + + /** + * Wait state for request to consume power + */ + SCI_PHY_SUB_AWAIT_SATA_POWER, + + /** + * Wait state for the SATA PHY notification + */ + SCI_PHY_SUB_AWAIT_SATA_PHY_EN, + + /** + * Wait for the SATA PHY speed notification + */ + SCI_PHY_SUB_AWAIT_SATA_SPEED_EN, + + /** + * Wait state for the SIGNATURE FIS unsolicited frame notification + */ + SCI_PHY_SUB_AWAIT_SIG_FIS_UF, + + /** + * Exit state for this state machine + */ + SCI_PHY_SUB_FINAL, + + /** + * This state indicates the the phy is now ready. Thus, the user + * is able to perform IO operations utilizing this phy as long as it + * is currently part of a valid port. + * This state is entered from the STARTING state. + */ + SCI_PHY_READY, + + /** + * This state indicates that the phy is in the process of being reset. + * In this state no new IO operations are permitted on this phy. + * This state is entered from the READY state. + */ + SCI_PHY_RESETTING, + + /** + * Simply the final state for the base phy state machine. + */ + SCI_PHY_FINAL, +}; + +void sci_phy_construct( + struct isci_phy *iphy, + struct isci_port *iport, + u8 phy_index); + +struct isci_port *phy_get_non_dummy_port(struct isci_phy *iphy); + +void sci_phy_set_port( + struct isci_phy *iphy, + struct isci_port *iport); + +enum sci_status sci_phy_initialize( + struct isci_phy *iphy, + struct scu_transport_layer_registers __iomem *transport_layer_registers, + struct scu_link_layer_registers __iomem *link_layer_registers); + +enum sci_status sci_phy_start( + struct isci_phy *iphy); + +enum sci_status sci_phy_stop( + struct isci_phy *iphy); + +enum sci_status sci_phy_reset( + struct isci_phy *iphy); + +void sci_phy_resume( + struct isci_phy *iphy); + +void sci_phy_setup_transport( + struct isci_phy *iphy, + u32 device_id); + +enum sci_status sci_phy_event_handler( + struct isci_phy *iphy, + u32 event_code); + +enum sci_status sci_phy_frame_handler( + struct isci_phy *iphy, + u32 frame_index); + +enum sci_status sci_phy_consume_power_handler( + struct isci_phy *iphy); + +void sci_phy_get_sas_address( + struct isci_phy *iphy, + struct sci_sas_address *sas_address); + +void sci_phy_get_attached_sas_address( + struct isci_phy *iphy, + struct sci_sas_address *sas_address); + +struct sci_phy_proto; +void sci_phy_get_protocols( + struct isci_phy *iphy, + struct sci_phy_proto *protocols); +enum sas_linkrate sci_phy_linkrate(struct isci_phy *iphy); + +struct isci_host; +void isci_phy_init(struct isci_phy *iphy, struct isci_host *ihost, int index); +int isci_phy_control(struct asd_sas_phy *phy, enum phy_func func, void *buf); + +#endif /* !defined(_ISCI_PHY_H_) */ |