summaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc/lpfc_init.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/lpfc/lpfc_init.c')
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c137
1 files changed, 128 insertions, 9 deletions
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index dfea2dada02c..b38f99f3be32 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -32,6 +32,7 @@
#include <linux/aer.h>
#include <linux/slab.h>
#include <linux/firmware.h>
+#include <linux/miscdevice.h>
#include <scsi/scsi.h>
#include <scsi/scsi_device.h>
@@ -1474,8 +1475,12 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
phba->sli4_hba.u.if_type2.STATUSregaddr,
&portstat_reg.word0);
/* consider PCI bus read error as pci_channel_offline */
- if (pci_rd_rc1 == -EIO)
+ if (pci_rd_rc1 == -EIO) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3151 PCI bus read access failure: x%x\n",
+ readl(phba->sli4_hba.u.if_type2.STATUSregaddr));
return;
+ }
reg_err1 = readl(phba->sli4_hba.u.if_type2.ERR1regaddr);
reg_err2 = readl(phba->sli4_hba.u.if_type2.ERR2regaddr);
if (bf_get(lpfc_sliport_status_oti, &portstat_reg)) {
@@ -1525,6 +1530,9 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba)
}
/* fall through for not able to recover */
}
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "3152 Unrecoverable error, bring the port "
+ "offline\n");
lpfc_sli4_offline_eratt(phba);
break;
case LPFC_SLI_INTF_IF_TYPE_1:
@@ -2333,13 +2341,20 @@ lpfc_cleanup(struct lpfc_vport *vport)
continue;
}
+ /* take care of nodes in unused state before the state
+ * machine taking action.
+ */
+ if (ndlp->nlp_state == NLP_STE_UNUSED_NODE) {
+ lpfc_nlp_put(ndlp);
+ continue;
+ }
+
if (ndlp->nlp_type & NLP_FABRIC)
lpfc_disc_state_machine(vport, ndlp, NULL,
NLP_EVT_DEVICE_RECOVERY);
lpfc_disc_state_machine(vport, ndlp, NULL,
NLP_EVT_DEVICE_RM);
-
}
/* At this point, ALL ndlp's should be gone
@@ -2513,6 +2528,42 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba)
}
/**
+ * lpfc_sli4_node_prep - Assign RPIs for active nodes.
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * Allocate RPIs for all active remote nodes. This is needed whenever
+ * an SLI4 adapter is reset and the driver is not unloading. Its purpose
+ * is to fixup the temporary rpi assignments.
+ **/
+void
+lpfc_sli4_node_prep(struct lpfc_hba *phba)
+{
+ struct lpfc_nodelist *ndlp, *next_ndlp;
+ struct lpfc_vport **vports;
+ int i;
+
+ if (phba->sli_rev != LPFC_SLI_REV4)
+ return;
+
+ vports = lpfc_create_vport_work_array(phba);
+ if (vports != NULL) {
+ for (i = 0; i <= phba->max_vports && vports[i] != NULL; i++) {
+ if (vports[i]->load_flag & FC_UNLOADING)
+ continue;
+
+ list_for_each_entry_safe(ndlp, next_ndlp,
+ &vports[i]->fc_nodes,
+ nlp_listp) {
+ if (NLP_CHK_NODE_ACT(ndlp))
+ ndlp->nlp_rpi =
+ lpfc_sli4_alloc_rpi(phba);
+ }
+ }
+ }
+ lpfc_destroy_vport_work_array(phba, vports);
+}
+
+/**
* lpfc_online - Initialize and bring a HBA online
* @phba: pointer to lpfc hba data structure.
*
@@ -2653,6 +2704,15 @@ lpfc_offline_prep(struct lpfc_hba * phba)
}
spin_lock_irq(shost->host_lock);
ndlp->nlp_flag &= ~NLP_NPR_ADISC;
+
+ /*
+ * Whenever an SLI4 port goes offline, free the
+ * RPI. A new RPI when the adapter port comes
+ * back online.
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ lpfc_sli4_free_rpi(phba, ndlp->nlp_rpi);
+
spin_unlock_irq(shost->host_lock);
lpfc_unreg_rpi(vports[i], ndlp);
}
@@ -4327,6 +4387,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
uint8_t pn_page[LPFC_MAX_SUPPORTED_PAGES] = {0};
struct lpfc_mqe *mqe;
int longs, sli_family;
+ int sges_per_segment;
/* Before proceed, wait for POST done and device ready */
rc = lpfc_sli4_post_status_check(phba);
@@ -4390,6 +4451,11 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
phba->fc_map[1] = LPFC_FCOE_FCF_MAP1;
phba->fc_map[2] = LPFC_FCOE_FCF_MAP2;
+ /* With BlockGuard we can have multiple SGEs per Data Segemnt */
+ sges_per_segment = 1;
+ if (phba->cfg_enable_bg)
+ sges_per_segment = 2;
+
/*
* Since the sg_tablesize is module parameter, the sg_dma_buf_size
* used to create the sg_dma_buf_pool must be dynamically calculated.
@@ -4398,7 +4464,8 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
* sgl sizes of must be a power of 2.
*/
buf_size = (sizeof(struct fcp_cmnd) + sizeof(struct fcp_rsp) +
- ((phba->cfg_sg_seg_cnt + 2) * sizeof(struct sli4_sge)));
+ (((phba->cfg_sg_seg_cnt * sges_per_segment) + 2) *
+ sizeof(struct sli4_sge)));
sli_family = bf_get(lpfc_sli_intf_sli_family, &phba->sli4_hba.sli_intf);
max_buf_size = LPFC_SLI4_MAX_BUF_SIZE;
@@ -4415,6 +4482,7 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
default:
break;
}
+
for (dma_buf_size = LPFC_SLI4_MIN_BUF_SIZE;
dma_buf_size < max_buf_size && buf_size > dma_buf_size;
dma_buf_size = dma_buf_size << 1)
@@ -7223,19 +7291,17 @@ lpfc_pci_function_reset(struct lpfc_hba *phba)
rc = -ENODEV;
goto out;
}
- if (bf_get(lpfc_sliport_status_rdy, &reg_data))
- break;
- if (bf_get(lpfc_sliport_status_rn, &reg_data)) {
+ if (bf_get(lpfc_sliport_status_rn, &reg_data))
reset_again++;
+ if (bf_get(lpfc_sliport_status_rdy, &reg_data))
break;
- }
}
/*
* If the port responds to the init request with
* reset needed, delay for a bit and restart the loop.
*/
- if (reset_again) {
+ if (reset_again && (rdy_chk < 1000)) {
msleep(10);
reset_again = 0;
continue;
@@ -8112,6 +8178,9 @@ lpfc_unset_hba(struct lpfc_hba *phba)
vport->load_flag |= FC_UNLOADING;
spin_unlock_irq(shost->host_lock);
+ kfree(phba->vpi_bmask);
+ kfree(phba->vpi_ids);
+
lpfc_stop_hba_timers(phba);
phba->pport->work_port_events = 0;
@@ -8644,6 +8713,9 @@ lpfc_pci_remove_one_s3(struct pci_dev *pdev)
/* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
+ kfree(phba->vpi_bmask);
+ kfree(phba->vpi_ids);
+
lpfc_stop_hba_timers(phba);
spin_lock_irq(&phba->hbalock);
list_del_init(&vport->listentry);
@@ -9058,7 +9130,7 @@ lpfc_sli4_get_els_iocb_cnt(struct lpfc_hba *phba)
int
lpfc_write_firmware(struct lpfc_hba *phba, const struct firmware *fw)
{
- char fwrev[32];
+ char fwrev[FW_REV_STR_SIZE];
struct lpfc_grp_hdr *image = (struct lpfc_grp_hdr *)fw->data;
struct list_head dma_buffer_list;
int i, rc = 0;
@@ -10012,6 +10084,36 @@ lpfc_io_resume(struct pci_dev *pdev)
return;
}
+/**
+ * lpfc_mgmt_open - method called when 'lpfcmgmt' is opened from userspace
+ * @inode: pointer to the inode representing the lpfcmgmt device
+ * @filep: pointer to the file representing the open lpfcmgmt device
+ *
+ * This routine puts a reference count on the lpfc module whenever the
+ * character device is opened
+ **/
+static int
+lpfc_mgmt_open(struct inode *inode, struct file *filep)
+{
+ try_module_get(THIS_MODULE);
+ return 0;
+}
+
+/**
+ * lpfc_mgmt_release - method called when 'lpfcmgmt' is closed in userspace
+ * @inode: pointer to the inode representing the lpfcmgmt device
+ * @filep: pointer to the file representing the open lpfcmgmt device
+ *
+ * This routine removes a reference count from the lpfc module when the
+ * character device is closed
+ **/
+static int
+lpfc_mgmt_release(struct inode *inode, struct file *filep)
+{
+ module_put(THIS_MODULE);
+ return 0;
+}
+
static struct pci_device_id lpfc_id_table[] = {
{PCI_VENDOR_ID_EMULEX, PCI_DEVICE_ID_VIPER,
PCI_ANY_ID, PCI_ANY_ID, },
@@ -10124,6 +10226,17 @@ static struct pci_driver lpfc_driver = {
.err_handler = &lpfc_err_handler,
};
+static const struct file_operations lpfc_mgmt_fop = {
+ .open = lpfc_mgmt_open,
+ .release = lpfc_mgmt_release,
+};
+
+static struct miscdevice lpfc_mgmt_dev = {
+ .minor = MISC_DYNAMIC_MINOR,
+ .name = "lpfcmgmt",
+ .fops = &lpfc_mgmt_fop,
+};
+
/**
* lpfc_init - lpfc module initialization routine
*
@@ -10144,6 +10257,11 @@ lpfc_init(void)
printk(LPFC_MODULE_DESC "\n");
printk(LPFC_COPYRIGHT "\n");
+ error = misc_register(&lpfc_mgmt_dev);
+ if (error)
+ printk(KERN_ERR "Could not register lpfcmgmt device, "
+ "misc_register returned with status %d", error);
+
if (lpfc_enable_npiv) {
lpfc_transport_functions.vport_create = lpfc_vport_create;
lpfc_transport_functions.vport_delete = lpfc_vport_delete;
@@ -10180,6 +10298,7 @@ lpfc_init(void)
static void __exit
lpfc_exit(void)
{
+ misc_deregister(&lpfc_mgmt_dev);
pci_unregister_driver(&lpfc_driver);
fc_release_transport(lpfc_transport_template);
if (lpfc_enable_npiv)