diff options
Diffstat (limited to 'drivers/scsi/megaraid/megaraid_sas.c')
| -rw-r--r-- | drivers/scsi/megaraid/megaraid_sas.c | 133 |
1 files changed, 94 insertions, 39 deletions
diff --git a/drivers/scsi/megaraid/megaraid_sas.c b/drivers/scsi/megaraid/megaraid_sas.c index 2fb53af8de2a..a487f414960e 100644 --- a/drivers/scsi/megaraid/megaraid_sas.c +++ b/drivers/scsi/megaraid/megaraid_sas.c @@ -10,7 +10,7 @@ * 2 of the License, or (at your option) any later version. * * FILE : megaraid_sas.c - * Version : v00.00.02.01 + * Version : v00.00.02.02 * * Authors: * Sreenivas Bagalkote <Sreenivas.Bagalkote@lsil.com> @@ -55,13 +55,13 @@ static struct pci_device_id megasas_pci_table[] = { { PCI_VENDOR_ID_LSI_LOGIC, - PCI_DEVICE_ID_LSI_SAS1064R, + PCI_DEVICE_ID_LSI_SAS1064R, // xscale IOP PCI_ANY_ID, PCI_ANY_ID, }, { PCI_VENDOR_ID_DELL, - PCI_DEVICE_ID_DELL_PERC5, + PCI_DEVICE_ID_DELL_PERC5, // xscale IOP PCI_ANY_ID, PCI_ANY_ID, }, @@ -119,12 +119,18 @@ megasas_return_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd) spin_unlock_irqrestore(&instance->cmd_pool_lock, flags); } + +/** +* The following functions are defined for xscale +* (deviceid : 1064R, PERC5) controllers +*/ + /** - * megasas_enable_intr - Enables interrupts + * megasas_enable_intr_xscale - Enables interrupts * @regs: MFI register set */ static inline void -megasas_enable_intr(struct megasas_register_set __iomem * regs) +megasas_enable_intr_xscale(struct megasas_register_set __iomem * regs) { writel(1, &(regs)->outbound_intr_mask); @@ -133,13 +139,73 @@ megasas_enable_intr(struct megasas_register_set __iomem * regs) } /** + * megasas_read_fw_status_reg_xscale - returns the current FW status value + * @regs: MFI register set + */ +static u32 +megasas_read_fw_status_reg_xscale(struct megasas_register_set __iomem * regs) +{ + return readl(&(regs)->outbound_msg_0); +} +/** + * megasas_clear_interrupt_xscale - Check & clear interrupt + * @regs: MFI register set + */ +static int +megasas_clear_intr_xscale(struct megasas_register_set __iomem * regs) +{ + u32 status; + /* + * Check if it is our interrupt + */ + status = readl(®s->outbound_intr_status); + + if (!(status & MFI_OB_INTR_STATUS_MASK)) { + return 1; + } + + /* + * Clear the interrupt by writing back the same value + */ + writel(status, ®s->outbound_intr_status); + + return 0; +} + +/** + * megasas_fire_cmd_xscale - Sends command to the FW + * @frame_phys_addr : Physical address of cmd + * @frame_count : Number of frames for the command + * @regs : MFI register set + */ +static inline void +megasas_fire_cmd_xscale(dma_addr_t frame_phys_addr,u32 frame_count, struct megasas_register_set __iomem *regs) +{ + writel((frame_phys_addr >> 3)|(frame_count), + &(regs)->inbound_queue_port); +} + +static struct megasas_instance_template megasas_instance_template_xscale = { + + .fire_cmd = megasas_fire_cmd_xscale, + .enable_intr = megasas_enable_intr_xscale, + .clear_intr = megasas_clear_intr_xscale, + .read_fw_status_reg = megasas_read_fw_status_reg_xscale, +}; + +/** +* This is the end of set of functions & definitions specific +* to xscale (deviceid : 1064R, PERC5) controllers +*/ + +/** * megasas_disable_intr - Disables interrupts * @regs: MFI register set */ static inline void megasas_disable_intr(struct megasas_register_set __iomem * regs) { - u32 mask = readl(®s->outbound_intr_mask) & (~0x00000001); + u32 mask = 0x1f; writel(mask, ®s->outbound_intr_mask); /* Dummy readl to force pci flush */ @@ -167,8 +233,7 @@ megasas_issue_polled(struct megasas_instance *instance, struct megasas_cmd *cmd) /* * Issue the frame using inbound queue port */ - writel(cmd->frame_phys_addr >> 3, - &instance->reg_set->inbound_queue_port); + instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set); /* * Wait for cmd_status to change @@ -198,8 +263,7 @@ megasas_issue_blocked_cmd(struct megasas_instance *instance, { cmd->cmd_status = ENODATA; - writel(cmd->frame_phys_addr >> 3, - &instance->reg_set->inbound_queue_port); + instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set); wait_event(instance->int_cmd_wait_q, (cmd->cmd_status != ENODATA)); @@ -242,8 +306,7 @@ megasas_issue_blocked_abort_cmd(struct megasas_instance *instance, cmd->sync_cmd = 1; cmd->cmd_status = 0xFF; - writel(cmd->frame_phys_addr >> 3, - &instance->reg_set->inbound_queue_port); + instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set); /* * Wait for this cmd to complete @@ -633,8 +696,7 @@ megasas_queue_command(struct scsi_cmnd *scmd, void (*done) (struct scsi_cmnd *)) instance->fw_outstanding++; spin_unlock_irqrestore(&instance->instance_lock, flags); - writel(((cmd->frame_phys_addr >> 3) | (cmd->frame_count - 1)), - &instance->reg_set->inbound_queue_port); + instance->instancet->fire_cmd(cmd->frame_phys_addr ,cmd->frame_count-1,instance->reg_set); return 0; @@ -1045,7 +1107,6 @@ megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd, static int megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status) { - u32 status; u32 producer; u32 consumer; u32 context; @@ -1053,17 +1114,10 @@ megasas_deplete_reply_queue(struct megasas_instance *instance, u8 alt_status) /* * Check if it is our interrupt + * Clear the interrupt */ - status = readl(&instance->reg_set->outbound_intr_status); - - if (!(status & MFI_OB_INTR_STATUS_MASK)) { + if(instance->instancet->clear_intr(instance->reg_set)) return IRQ_NONE; - } - - /* - * Clear the interrupt by writing back the same value - */ - writel(status, &instance->reg_set->outbound_intr_status); producer = *instance->producer; consumer = *instance->consumer; @@ -1097,7 +1151,7 @@ static irqreturn_t megasas_isr(int irq, void *devp, struct pt_regs *regs) /** * megasas_transition_to_ready - Move the FW to READY state - * @reg_set: MFI register set + * @instance: Adapter soft state * * During the initialization, FW passes can potentially be in any one of * several possible states. If the FW in operational, waiting-for-handshake @@ -1105,14 +1159,14 @@ static irqreturn_t megasas_isr(int irq, void *devp, struct pt_regs *regs) * has to wait for the ready state. */ static int -megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set) +megasas_transition_to_ready(struct megasas_instance* instance) { int i; u8 max_wait; u32 fw_state; u32 cur_state; - fw_state = readl(®_set->outbound_msg_0) & MFI_STATE_MASK; + fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & MFI_STATE_MASK; while (fw_state != MFI_STATE_READY) { @@ -1130,7 +1184,7 @@ megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set) * Set the CLR bit in inbound doorbell */ writel(MFI_INIT_CLEAR_HANDSHAKE, - ®_set->inbound_doorbell); + &instance->reg_set->inbound_doorbell); max_wait = 2; cur_state = MFI_STATE_WAIT_HANDSHAKE; @@ -1140,8 +1194,8 @@ megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set) /* * Bring it to READY state; assuming max wait 2 secs */ - megasas_disable_intr(reg_set); - writel(MFI_INIT_READY, ®_set->inbound_doorbell); + megasas_disable_intr(instance->reg_set); + writel(MFI_INIT_READY, &instance->reg_set->inbound_doorbell); max_wait = 10; cur_state = MFI_STATE_OPERATIONAL; @@ -1190,8 +1244,8 @@ megasas_transition_to_ready(struct megasas_register_set __iomem * reg_set) * The cur_state should not last for more than max_wait secs */ for (i = 0; i < (max_wait * 1000); i++) { - fw_state = MFI_STATE_MASK & - readl(®_set->outbound_msg_0); + fw_state = instance->instancet->read_fw_status_reg(instance->reg_set) & + MFI_STATE_MASK ; if (fw_state == cur_state) { msleep(1); @@ -1553,18 +1607,20 @@ static int megasas_init_mfi(struct megasas_instance *instance) reg_set = instance->reg_set; + instance->instancet = &megasas_instance_template_xscale; + /* * We expect the FW state to be READY */ - if (megasas_transition_to_ready(instance->reg_set)) + if (megasas_transition_to_ready(instance)) goto fail_ready_state; /* * Get various operational parameters from status register */ - instance->max_fw_cmds = readl(®_set->outbound_msg_0) & 0x00FFFF; - instance->max_num_sge = (readl(®_set->outbound_msg_0) & 0xFF0000) >> - 0x10; + instance->max_fw_cmds = instance->instancet->read_fw_status_reg(reg_set) & 0x00FFFF; + instance->max_num_sge = (instance->instancet->read_fw_status_reg(reg_set) & 0xFF0000) >> + 0x10; /* * Create a pool of commands */ @@ -1873,8 +1929,7 @@ megasas_register_aen(struct megasas_instance *instance, u32 seq_num, /* * Issue the aen registration frame */ - writel(cmd->frame_phys_addr >> 3, - &instance->reg_set->inbound_queue_port); + instance->instancet->fire_cmd(cmd->frame_phys_addr ,0,instance->reg_set); return 0; } @@ -2063,7 +2118,7 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) goto fail_irq; } - megasas_enable_intr(instance->reg_set); + instance->instancet->enable_intr(instance->reg_set); /* * Store instance in PCI softstate |