diff options
Diffstat (limited to 'drivers/scsi/mpt2sas/mpt2sas_scsih.c')
-rw-r--r-- | drivers/scsi/mpt2sas/mpt2sas_scsih.c | 266 |
1 files changed, 241 insertions, 25 deletions
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c index efabea1a3ce4..c7ec3f174782 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c +++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c @@ -52,6 +52,7 @@ #include <linux/delay.h> #include <linux/pci.h> #include <linux/interrupt.h> +#include <linux/raid_class.h> #include "mpt2sas_base.h" @@ -133,6 +134,9 @@ struct fw_event_work { void *event_data; }; +/* raid transport support */ +static struct raid_template *mpt2sas_raid_template; + /** * struct _scsi_io_transfer - scsi io transfer * @handle: sas device handle (assigned by firmware) @@ -1305,7 +1309,6 @@ _scsih_slave_alloc(struct scsi_device *sdev) struct MPT2SAS_DEVICE *sas_device_priv_data; struct scsi_target *starget; struct _raid_device *raid_device; - struct _sas_device *sas_device; unsigned long flags; sas_device_priv_data = kzalloc(sizeof(struct scsi_device), GFP_KERNEL); @@ -1332,21 +1335,8 @@ _scsih_slave_alloc(struct scsi_device *sdev) if (raid_device) raid_device->sdev = sdev; /* raid is single lun */ spin_unlock_irqrestore(&ioc->raid_device_lock, flags); - } else { - /* set TLR bit for SSP devices */ - if (!(ioc->facts.IOCCapabilities & - MPI2_IOCFACTS_CAPABILITY_TLR)) - goto out; - spin_lock_irqsave(&ioc->sas_device_lock, flags); - sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc, - sas_device_priv_data->sas_target->sas_address); - spin_unlock_irqrestore(&ioc->sas_device_lock, flags); - if (sas_device && sas_device->device_info & - MPI2_SAS_DEVICE_INFO_SSP_TARGET) - sas_device_priv_data->flags |= MPT_DEVICE_TLR_ON; } - out: return 0; } @@ -1419,6 +1409,140 @@ _scsih_display_sata_capabilities(struct MPT2SAS_ADAPTER *ioc, } /** + * _scsih_is_raid - return boolean indicating device is raid volume + * @dev the device struct object + */ +static int +_scsih_is_raid(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + + return (sdev->channel == RAID_CHANNEL) ? 1 : 0; +} + +/** + * _scsih_get_resync - get raid volume resync percent complete + * @dev the device struct object + */ +static void +_scsih_get_resync(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host); + static struct _raid_device *raid_device; + unsigned long flags; + Mpi2RaidVolPage0_t vol_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 volume_status_flags; + u8 percent_complete = 0; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, + sdev->channel); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (!raid_device) + goto out; + + if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, + sizeof(Mpi2RaidVolPage0_t))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + volume_status_flags = le32_to_cpu(vol_pg0.VolumeStatusFlags); + if (volume_status_flags & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) + percent_complete = raid_device->percent_complete; + out: + raid_set_resync(mpt2sas_raid_template, dev, percent_complete); +} + +/** + * _scsih_get_state - get raid volume level + * @dev the device struct object + */ +static void +_scsih_get_state(struct device *dev) +{ + struct scsi_device *sdev = to_scsi_device(dev); + struct MPT2SAS_ADAPTER *ioc = shost_priv(sdev->host); + static struct _raid_device *raid_device; + unsigned long flags; + Mpi2RaidVolPage0_t vol_pg0; + Mpi2ConfigReply_t mpi_reply; + u32 volstate; + enum raid_state state = RAID_STATE_UNKNOWN; + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_id(ioc, sdev->id, + sdev->channel); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (!raid_device) + goto out; + + if (mpt2sas_config_get_raid_volume_pg0(ioc, &mpi_reply, &vol_pg0, + MPI2_RAID_VOLUME_PGAD_FORM_HANDLE, raid_device->handle, + sizeof(Mpi2RaidVolPage0_t))) { + printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n", + ioc->name, __FILE__, __LINE__, __func__); + goto out; + } + + volstate = le32_to_cpu(vol_pg0.VolumeStatusFlags); + if (volstate & MPI2_RAIDVOL0_STATUS_FLAG_RESYNC_IN_PROGRESS) { + state = RAID_STATE_RESYNCING; + goto out; + } + + switch (vol_pg0.VolumeState) { + case MPI2_RAID_VOL_STATE_OPTIMAL: + case MPI2_RAID_VOL_STATE_ONLINE: + state = RAID_STATE_ACTIVE; + break; + case MPI2_RAID_VOL_STATE_DEGRADED: + state = RAID_STATE_DEGRADED; + break; + case MPI2_RAID_VOL_STATE_FAILED: + case MPI2_RAID_VOL_STATE_MISSING: + state = RAID_STATE_OFFLINE; + break; + } + out: + raid_set_state(mpt2sas_raid_template, dev, state); +} + +/** + * _scsih_set_level - set raid level + * @sdev: scsi device struct + * @raid_device: raid_device object + */ +static void +_scsih_set_level(struct scsi_device *sdev, struct _raid_device *raid_device) +{ + enum raid_level level = RAID_LEVEL_UNKNOWN; + + switch (raid_device->volume_type) { + case MPI2_RAID_VOL_TYPE_RAID0: + level = RAID_LEVEL_0; + break; + case MPI2_RAID_VOL_TYPE_RAID10: + level = RAID_LEVEL_10; + break; + case MPI2_RAID_VOL_TYPE_RAID1E: + level = RAID_LEVEL_1E; + break; + case MPI2_RAID_VOL_TYPE_RAID1: + level = RAID_LEVEL_1; + break; + } + + raid_set_level(mpt2sas_raid_template, &sdev->sdev_gendev, level); +} + +/** * _scsih_get_volume_capabilities - volume capabilities * @ioc: per adapter object * @sas_device: the raid_device object @@ -1479,6 +1603,32 @@ _scsih_get_volume_capabilities(struct MPT2SAS_ADAPTER *ioc, } /** + * _scsih_enable_tlr - setting TLR flags + * @ioc: per adapter object + * @sdev: scsi device struct + * + * Enabling Transaction Layer Retries for tape devices when + * vpd page 0x90 is present + * + */ +static void +_scsih_enable_tlr(struct MPT2SAS_ADAPTER *ioc, struct scsi_device *sdev) +{ + /* only for TAPE */ + if (sdev->type != TYPE_TAPE) + return; + + if (!(ioc->facts.IOCCapabilities & MPI2_IOCFACTS_CAPABILITY_TLR)) + return; + + sas_enable_tlr(sdev); + sdev_printk(KERN_INFO, sdev, "TLR %s\n", + sas_is_tlr_enabled(sdev) ? "Enabled" : "Disabled"); + return; + +} + +/** * _scsih_slave_configure - device configure routine. * @sdev: scsi device struct * @@ -1574,6 +1724,8 @@ _scsih_slave_configure(struct scsi_device *sdev) (unsigned long long)raid_device->wwid, raid_device->num_pds, ds); _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); + /* raid transport support */ + _scsih_set_level(sdev, raid_device); return 0; } @@ -1621,8 +1773,10 @@ _scsih_slave_configure(struct scsi_device *sdev) _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT); - if (ssp_target) + if (ssp_target) { sas_read_port_mode_page(sdev); + _scsih_enable_tlr(ioc, sdev); + } return 0; } @@ -2908,8 +3062,9 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *)) } else mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ; - - if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON)) + /* Make sure Device is not raid volume */ + if (!_scsih_is_raid(&scmd->device->sdev_gendev) && + sas_is_tlr_enabled(scmd->device)) mpi_control |= MPI2_SCSIIO_CONTROL_TLR_ON; smid = mpt2sas_base_get_smid_scsiio(ioc, ioc->scsi_io_cb_idx, scmd); @@ -3298,10 +3453,12 @@ _scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply) le32_to_cpu(mpi_reply->ResponseInfo) & 0xFF; if (!sas_device_priv_data->tlr_snoop_check) { sas_device_priv_data->tlr_snoop_check++; - if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) && - response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) - sas_device_priv_data->flags &= - ~MPT_DEVICE_TLR_ON; + if (!_scsih_is_raid(&scmd->device->sdev_gendev) && + sas_is_tlr_enabled(scmd->device) && + response_code == MPI2_SCSITASKMGMT_RSP_INVALID_FRAME) { + sas_disable_tlr(scmd->device); + sdev_printk(KERN_INFO, scmd->device, "TLR disabled\n"); + } } xfer_cnt = le32_to_cpu(mpi_reply->TransferCount); @@ -5170,11 +5327,33 @@ static void _scsih_sas_ir_operation_status_event(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event) { + Mpi2EventDataIrOperationStatus_t *event_data = fw_event->event_data; + static struct _raid_device *raid_device; + unsigned long flags; + u16 handle; + #ifdef CONFIG_SCSI_MPT2SAS_LOGGING if (ioc->logging_level & MPT_DEBUG_EVENT_WORK_TASK) _scsih_sas_ir_operation_status_event_debug(ioc, - fw_event->event_data); + event_data); #endif + + /* code added for raid transport support */ + if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) { + + handle = le16_to_cpu(event_data->VolDevHandle); + + spin_lock_irqsave(&ioc->raid_device_lock, flags); + raid_device = _scsih_raid_device_find_by_handle(ioc, handle); + spin_unlock_irqrestore(&ioc->raid_device_lock, flags); + + if (!raid_device) + return; + + if (event_data->RAIDOperation == MPI2_EVENT_IR_RAIDOP_RESYNC) + raid_device->percent_complete = + event_data->PercentComplete; + } } /** @@ -5998,6 +6177,8 @@ _scsih_remove(struct pci_dev *pdev) struct _sas_port *mpt2sas_port; struct _sas_device *sas_device; struct _sas_node *expander_sibling; + struct _raid_device *raid_device, *next; + struct MPT2SAS_TARGET *sas_target_priv_data; struct workqueue_struct *wq; unsigned long flags; @@ -6011,6 +6192,21 @@ _scsih_remove(struct pci_dev *pdev) if (wq) destroy_workqueue(wq); + /* release all the volumes */ + list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list, + list) { + if (raid_device->starget) { + sas_target_priv_data = + raid_device->starget->hostdata; + sas_target_priv_data->deleted = 1; + scsi_remove_target(&raid_device->starget->dev); + } + printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid" + "(0x%016llx)\n", ioc->name, raid_device->handle, + (unsigned long long) raid_device->wwid); + _scsih_raid_device_remove(ioc, raid_device); + } + /* free ports attached to the sas_host */ retry_again: list_for_each_entry(mpt2sas_port, @@ -6373,6 +6569,13 @@ static struct pci_driver scsih_driver = { #endif }; +/* raid transport support */ +static struct raid_function_template mpt2sas_raid_functions = { + .cookie = &scsih_driver_template, + .is_raid = _scsih_is_raid, + .get_resync = _scsih_get_resync, + .get_state = _scsih_get_state, +}; /** * _scsih_init - main entry point for this driver. @@ -6392,6 +6595,12 @@ _scsih_init(void) sas_attach_transport(&mpt2sas_transport_functions); if (!mpt2sas_transport_template) return -ENODEV; + /* raid transport support */ + mpt2sas_raid_template = raid_class_attach(&mpt2sas_raid_functions); + if (!mpt2sas_raid_template) { + sas_release_transport(mpt2sas_transport_template); + return -ENODEV; + } mpt2sas_base_initialize_callback_handler(); @@ -6426,8 +6635,11 @@ _scsih_init(void) mpt2sas_ctl_init(); error = pci_register_driver(&scsih_driver); - if (error) + if (error) { + /* raid transport support */ + raid_class_release(mpt2sas_raid_template); sas_release_transport(mpt2sas_transport_template); + } return error; } @@ -6445,7 +6657,8 @@ _scsih_exit(void) pci_unregister_driver(&scsih_driver); - sas_release_transport(mpt2sas_transport_template); + mpt2sas_ctl_exit(); + mpt2sas_base_release_callback_handler(scsi_io_cb_idx); mpt2sas_base_release_callback_handler(tm_cb_idx); mpt2sas_base_release_callback_handler(base_cb_idx); @@ -6457,7 +6670,10 @@ _scsih_exit(void) mpt2sas_base_release_callback_handler(tm_tr_cb_idx); mpt2sas_base_release_callback_handler(tm_sas_control_cb_idx); - mpt2sas_ctl_exit(); + /* raid transport support */ + raid_class_release(mpt2sas_raid_template); + sas_release_transport(mpt2sas_transport_template); + } module_init(_scsih_init); |