1 files changed, 112 insertions, 112 deletions

diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 2e9a4445596f..bb65cce0491d 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -103,7 +103,6 @@ struct sense_info {
 };
 
 
-#define MPT2SAS_RESCAN_AFTER_HOST_RESET (0xFFFF)
 /**
  * struct fw_event_work - firmware event struct
  * @list: link list framework
@@ -1502,7 +1501,13 @@ _scsih_slave_configure(struct scsi_device *sdev)
 			break;
 		case MPI2_RAID_VOL_TYPE_RAID1E:
 			qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
-			r_level = "RAID1E";
+			if (ioc->manu_pg10.OEMIdentifier &&
+			    (ioc->manu_pg10.GenericFlags0 &
+			    MFG10_GF0_R10_DISPLAY) &&
+			    !(raid_device->num_pds % 2))
+				r_level = "RAID10";
+			else
+				r_level = "RAID1E";
 			break;
 		case MPI2_RAID_VOL_TYPE_RAID1:
 			qdepth = MPT2SAS_RAID_QUEUE_DEPTH;
@@ -1786,17 +1791,18 @@ mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle, uint lun,
 	u32 ioc_state;
 	unsigned long timeleft;
 	u8 VF_ID = 0;
-	unsigned long flags;
 
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED ||
-	    ioc->shost_recovery) {
-		spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	if (ioc->tm_cmds.status != MPT2_CMD_NOT_USED) {
+		printk(MPT2SAS_INFO_FMT "%s: tm_cmd busy!!!\n",
+		    __func__, ioc->name);
+		return;
+	}
+
+	if (ioc->shost_recovery) {
 		printk(MPT2SAS_INFO_FMT "%s: host reset in progress!\n",
 		    __func__, ioc->name);
 		return;
 	}
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 
 	ioc_state = mpt2sas_base_get_iocstate(ioc, 0);
 	if (ioc_state & MPI2_DOORBELL_USED) {
@@ -2222,7 +2228,7 @@ _scsih_ublock_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 			    MPT2SAS_INFO_FMT "SDEV_RUNNING: "
 			    "handle(0x%04x)\n", ioc->name, handle));
 			sas_device_priv_data->block = 0;
-			scsi_device_set_state(sdev, SDEV_RUNNING);
+			scsi_internal_device_unblock(sdev);
 		}
 	}
 }
@@ -2251,7 +2257,7 @@ _scsih_block_io_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 			    MPT2SAS_INFO_FMT "SDEV_BLOCK: "
 			    "handle(0x%04x)\n", ioc->name, handle));
 			sas_device_priv_data->block = 1;
-			scsi_device_set_state(sdev, SDEV_BLOCK);
+			scsi_internal_device_block(sdev);
 		}
 	}
 }
@@ -2327,6 +2333,7 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
 	u16 handle;
 	u16 reason_code;
 	u8 phy_number;
+	u8 link_rate;
 
 	for (i = 0; i < event_data->NumEntries; i++) {
 		handle = le16_to_cpu(event_data->PHY[i].AttachedDevHandle);
@@ -2337,6 +2344,11 @@ _scsih_block_io_to_children_attached_directly(struct MPT2SAS_ADAPTER *ioc,
 		    MPI2_EVENT_SAS_TOPO_RC_MASK;
 		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING)
 			_scsih_block_io_device(ioc, handle);
+		if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) {
+			link_rate = event_data->PHY[i].LinkRate >> 4;
+			if (link_rate >= MPI2_SAS_NEG_LINK_RATE_1_5)
+				_scsih_ublock_io_device(ioc, handle);
+		}
 	}
 }
 
@@ -2405,27 +2417,6 @@ _scsih_check_topo_delete_events(struct MPT2SAS_ADAPTER *ioc,
 }
 
 /**
- * _scsih_queue_rescan - queue a topology rescan from user context
- * @ioc: per adapter object
- *
- * Return nothing.
- */
-static void
-_scsih_queue_rescan(struct MPT2SAS_ADAPTER *ioc)
-{
-	struct fw_event_work *fw_event;
-
-	if (ioc->wait_for_port_enable_to_complete)
-		return;
-	fw_event = kzalloc(sizeof(struct fw_event_work), GFP_ATOMIC);
-	if (!fw_event)
-		return;
-	fw_event->event = MPT2SAS_RESCAN_AFTER_HOST_RESET;
-	fw_event->ioc = ioc;
-	_scsih_fw_event_add(ioc, fw_event);
-}
-
-/**
  * _scsih_flush_running_cmds - completing outstanding commands.
  * @ioc: per adapter object
  *
@@ -2456,46 +2447,6 @@ _scsih_flush_running_cmds(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
- * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
- * @ioc: per adapter object
- * @reset_phase: phase
- *
- * The handler for doing any required cleanup or initialization.
- *
- * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
- * MPT2_IOC_DONE_RESET
- *
- * Return nothing.
- */
-void
-mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
-{
-	switch (reset_phase) {
-	case MPT2_IOC_PRE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
-		    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
-		_scsih_fw_event_off(ioc);
-		break;
-	case MPT2_IOC_AFTER_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
-		    "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
-		if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
-			ioc->tm_cmds.status |= MPT2_CMD_RESET;
-			mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
-			complete(&ioc->tm_cmds.done);
-		}
-		_scsih_fw_event_on(ioc);
-		_scsih_flush_running_cmds(ioc);
-		break;
-	case MPT2_IOC_DONE_RESET:
-		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
-		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
-		_scsih_queue_rescan(ioc);
-		break;
-	}
-}
-
-/**
  * _scsih_setup_eedp - setup MPI request for EEDP transfer
  * @scmd: pointer to scsi command object
  * @mpi_request: pointer to the SCSI_IO reqest message frame
@@ -2615,7 +2566,6 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	Mpi2SCSIIORequest_t *mpi_request;
 	u32 mpi_control;
 	u16 smid;
-	unsigned long flags;
 
 	scmd->scsi_done = done;
 	sas_device_priv_data = scmd->device->hostdata;
@@ -2634,13 +2584,10 @@ _scsih_qcmd(struct scsi_cmnd *scmd, void (*done)(struct scsi_cmnd *))
 	}
 
 	/* see if we are busy with task managment stuff */
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	if (sas_target_priv_data->tm_busy ||
-	    ioc->shost_recovery || ioc->ioc_link_reset_in_progress) {
-		spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
+	if (sas_target_priv_data->tm_busy)
+		return SCSI_MLQUEUE_DEVICE_BUSY;
+	else if (ioc->shost_recovery || ioc->ioc_link_reset_in_progress)
 		return SCSI_MLQUEUE_HOST_BUSY;
-	}
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 
 	if (scmd->sc_data_direction == DMA_FROM_DEVICE)
 		mpi_control = MPI2_SCSIIO_CONTROL_READ;
@@ -3436,6 +3383,9 @@ _scsih_expander_add(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	if (!handle)
 		return -1;
 
+	if (ioc->shost_recovery)
+		return -1;
+
 	if ((mpt2sas_config_get_expander_pg0(ioc, &mpi_reply, &expander_pg0,
 	    MPI2_SAS_EXPAND_PGAD_FORM_HNDL, handle))) {
 		printk(MPT2SAS_ERR_FMT "failure at %s:%d/%s()!\n",
@@ -3572,6 +3522,9 @@ _scsih_expander_remove(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	struct _sas_node *sas_expander;
 	unsigned long flags;
 
+	if (ioc->shost_recovery)
+		return;
+
 	spin_lock_irqsave(&ioc->sas_node_lock, flags);
 	sas_expander = mpt2sas_scsih_expander_find_by_handle(ioc, handle);
 	spin_unlock_irqrestore(&ioc->sas_node_lock, flags);
@@ -3743,6 +3696,8 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 		mutex_unlock(&ioc->tm_cmds.mutex);
 		dewtprintk(ioc, printk(MPT2SAS_INFO_FMT "issue target reset "
 		    "done: handle(0x%04x)\n", ioc->name, device_handle));
+		if (ioc->shost_recovery)
+			goto out;
 	}
 
 	/* SAS_IO_UNIT_CNTR - send REMOVE_DEVICE */
@@ -3765,6 +3720,9 @@ _scsih_remove_device(struct MPT2SAS_ADAPTER *ioc, u16 handle)
 	    le32_to_cpu(mpi_reply.IOCLogInfo)));
 
  out:
+
+	_scsih_ublock_io_device(ioc, handle);
+
 	mpt2sas_transport_port_remove(ioc, sas_device->sas_address,
 	    sas_device->parent_handle);
 
@@ -3908,6 +3866,8 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 			    "expander event\n", ioc->name));
 			return;
 		}
+		if (ioc->shost_recovery)
+			return;
 		if (event_data->PHY[i].PhyStatus &
 		    MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT)
 			continue;
@@ -3942,10 +3902,6 @@ _scsih_sas_topology_change_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
 						   link_rate_);
 				}
 			}
-			if (reason_code == MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED) {
-				if (link_rate_ >= MPI2_SAS_NEG_LINK_RATE_1_5)
-					_scsih_ublock_io_device(ioc, handle);
-			}
 			if (reason_code == MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED) {
 				if (link_rate_ < MPI2_SAS_NEG_LINK_RATE_1_5)
 					break;
@@ -5156,22 +5112,9 @@ static void
 _scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc)
 {
 	struct _sas_device *sas_device, *sas_device_next;
-	struct _sas_node *sas_expander, *sas_expander_next;
+	struct _sas_node *sas_expander;
 	struct _raid_device *raid_device, *raid_device_next;
-	unsigned long flags;
-
-	_scsih_search_responding_sas_devices(ioc);
-	_scsih_search_responding_raid_devices(ioc);
-	_scsih_search_responding_expanders(ioc);
 
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
-	ioc->shost_recovery = 0;
-	if (ioc->shost->shost_state == SHOST_RECOVERY) {
-		printk(MPT2SAS_INFO_FMT "putting controller into "
-		    "SHOST_RUNNING\n", ioc->name);
-		scsi_host_set_state(ioc->shost, SHOST_RUNNING);
-	}
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 
 	list_for_each_entry_safe(sas_device, sas_device_next,
 	    &ioc->sas_device_list, list) {
@@ -5207,16 +5150,63 @@ _scsih_remove_unresponding_devices(struct MPT2SAS_ADAPTER *ioc)
 		_scsih_raid_device_remove(ioc, raid_device);
 	}
 
-	list_for_each_entry_safe(sas_expander, sas_expander_next,
-	    &ioc->sas_expander_list, list) {
+ retry_expander_search:
+	sas_expander = NULL;
+	list_for_each_entry(sas_expander, &ioc->sas_expander_list, list) {
 		if (sas_expander->responding) {
 			sas_expander->responding = 0;
 			continue;
 		}
-		printk("\tremoving expander: handle(0x%04x), "
-		    " sas_addr(0x%016llx)\n", sas_expander->handle,
-		    (unsigned long long)sas_expander->sas_address);
 		_scsih_expander_remove(ioc, sas_expander->handle);
+		goto retry_expander_search;
+	}
+}
+
+/**
+ * mpt2sas_scsih_reset_handler - reset callback handler (for scsih)
+ * @ioc: per adapter object
+ * @reset_phase: phase
+ *
+ * The handler for doing any required cleanup or initialization.
+ *
+ * The reset phase can be MPT2_IOC_PRE_RESET, MPT2_IOC_AFTER_RESET,
+ * MPT2_IOC_DONE_RESET
+ *
+ * Return nothing.
+ */
+void
+mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
+{
+	switch (reset_phase) {
+	case MPT2_IOC_PRE_RESET:
+		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		    "MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+		_scsih_fw_event_off(ioc);
+		break;
+	case MPT2_IOC_AFTER_RESET:
+		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		    "MPT2_IOC_AFTER_RESET\n", ioc->name, __func__));
+		if (ioc->tm_cmds.status & MPT2_CMD_PENDING) {
+			ioc->tm_cmds.status |= MPT2_CMD_RESET;
+			mpt2sas_base_free_smid(ioc, ioc->tm_cmds.smid);
+			complete(&ioc->tm_cmds.done);
+		}
+		_scsih_fw_event_on(ioc);
+		_scsih_flush_running_cmds(ioc);
+		break;
+	case MPT2_IOC_DONE_RESET:
+		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		    "MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+		_scsih_sas_host_refresh(ioc, 0);
+		_scsih_search_responding_sas_devices(ioc);
+		_scsih_search_responding_raid_devices(ioc);
+		_scsih_search_responding_expanders(ioc);
+		break;
+	case MPT2_IOC_RUNNING:
+		dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+		    "MPT2_IOC_RUNNING\n", ioc->name, __func__));
+		_scsih_remove_unresponding_devices(ioc);
+		break;
 	}
 }
 
@@ -5236,14 +5226,6 @@ _firmware_event_work(struct work_struct *work)
 	unsigned long flags;
 	struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
 
-	/* This is invoked by calling _scsih_queue_rescan(). */
-	if (fw_event->event == MPT2SAS_RESCAN_AFTER_HOST_RESET) {
-		_scsih_fw_event_free(ioc, fw_event);
-		_scsih_sas_host_refresh(ioc, 1);
-		_scsih_remove_unresponding_devices(ioc);
-		return;
-	}
-
 	/* the queue is being flushed so ignore this event */
 	spin_lock_irqsave(&ioc->fw_event_lock, flags);
 	if (ioc->fw_events_off || ioc->remove_host) {
@@ -5253,13 +5235,10 @@ _firmware_event_work(struct work_struct *work)
 	}
 	spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
 
-	spin_lock_irqsave(&ioc->ioc_reset_in_progress_lock, flags);
 	if (ioc->shost_recovery) {
-		spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 		_scsih_fw_event_requeue(ioc, fw_event, 1000);
 		return;
 	}
-	spin_unlock_irqrestore(&ioc->ioc_reset_in_progress_lock, flags);
 
 	switch (fw_event->event) {
 	case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
@@ -5461,6 +5440,8 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
 			if (!sas_device)
 				continue;
 			_scsih_remove_device(ioc, sas_device->handle);
+			if (ioc->shost_recovery)
+				return;
 			goto retry_device_search;
 		}
 	}
@@ -5482,6 +5463,8 @@ _scsih_expander_node_remove(struct MPT2SAS_ADAPTER *ioc,
 			if (!expander_sibling)
 				continue;
 			_scsih_expander_remove(ioc, expander_sibling->handle);
+			if (ioc->shost_recovery)
+				return;
 			goto retry_expander_search;
 		}
 	}
@@ -5513,6 +5496,8 @@ _scsih_remove(struct pci_dev *pdev)
 	struct _sas_port *mpt2sas_port;
 	struct _sas_device *sas_device;
 	struct _sas_node *expander_sibling;
+	struct _raid_device *raid_device, *next;
+	struct MPT2SAS_TARGET *sas_target_priv_data;
 	struct workqueue_struct	*wq;
 	unsigned long flags;
 
@@ -5526,6 +5511,21 @@ _scsih_remove(struct pci_dev *pdev)
 	if (wq)
 		destroy_workqueue(wq);
 
+	/* release all the volumes */
+	list_for_each_entry_safe(raid_device, next, &ioc->raid_device_list,
+	    list) {
+		if (raid_device->starget) {
+			sas_target_priv_data =
+			    raid_device->starget->hostdata;
+			sas_target_priv_data->deleted = 1;
+			scsi_remove_target(&raid_device->starget->dev);
+		}
+		printk(MPT2SAS_INFO_FMT "removing handle(0x%04x), wwid"
+		    "(0x%016llx)\n", ioc->name,  raid_device->handle,
+		    (unsigned long long) raid_device->wwid);
+		_scsih_raid_device_remove(ioc, raid_device);
+	}
+
 	/* free ports attached to the sas_host */
  retry_again:
 	list_for_each_entry(mpt2sas_port,