diff options
Diffstat (limited to 'drivers/scsi/qla2xxx/qla_def.h')
| -rw-r--r-- | drivers/scsi/qla2xxx/qla_def.h | 48 |
1 files changed, 45 insertions, 3 deletions
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 79d8a914f9d0..b31a03bbd14f 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -29,6 +29,7 @@ #include <scsi/scsi_host.h> #include <scsi/scsi_device.h> #include <scsi/scsi_cmnd.h> +#include <scsi/scsi_transport_fc.h> #if defined(CONFIG_SCSI_QLA2XXX_EMBEDDED_FIRMWARE) #if defined(CONFIG_SCSI_QLA21XX) || defined(CONFIG_SCSI_QLA21XX_MODULE) @@ -181,6 +182,13 @@ #define WRT_REG_DWORD(addr, data) writel(data,addr) /* + * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an + * 133Mhz slot. + */ +#define RD_REG_WORD_PIO(addr) (inw((unsigned long)addr)) +#define WRT_REG_WORD_PIO(addr, data) (outw(data,(unsigned long)addr)) + +/* * Fibre Channel device definitions. */ #define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */ @@ -432,6 +440,9 @@ struct device_reg_2xxx { #define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040 #define GPIO_LED_GREEN_OFF_AMBER_ON 0x0080 #define GPIO_LED_GREEN_ON_AMBER_ON 0x00C0 +#define GPIO_LED_ALL_OFF 0x0000 +#define GPIO_LED_RED_ON_OTHER_OFF 0x0001 /* isp2322 */ +#define GPIO_LED_RGA_ON 0x00C1 /* isp2322: red green amber */ union { struct { @@ -1680,7 +1691,8 @@ typedef struct fc_port { uint8_t mp_byte; /* multi-path byte (not used) */ uint8_t cur_path; /* current path id */ - struct fc_rport *rport; + spinlock_t rport_lock; + struct fc_rport *rport, *drport; u32 supported_classes; struct work_struct rport_add_work; struct work_struct rport_del_work; @@ -2198,6 +2210,15 @@ struct isp_operations { void (*fw_dump) (struct scsi_qla_host *, int); void (*ascii_fw_dump) (struct scsi_qla_host *); + + int (*beacon_on) (struct scsi_qla_host *); + int (*beacon_off) (struct scsi_qla_host *); + void (*beacon_blink) (struct scsi_qla_host *); + + uint8_t * (*read_optrom) (struct scsi_qla_host *, uint8_t *, + uint32_t, uint32_t); + int (*write_optrom) (struct scsi_qla_host *, uint8_t *, uint32_t, + uint32_t); }; /* @@ -2270,6 +2291,7 @@ typedef struct scsi_qla_host { #define LOOP_RESET_NEEDED 24 #define BEACON_BLINK_NEEDED 25 #define REGISTER_FDMI_NEEDED 26 +#define FCPORT_UPDATE_NEEDED 27 uint32_t device_flags; #define DFLG_LOCAL_DEVICES BIT_0 @@ -2329,6 +2351,10 @@ typedef struct scsi_qla_host { uint16_t min_external_loopid; /* First external loop Id */ uint16_t link_data_rate; /* F/W operating speed */ +#define LDR_1GB 0 +#define LDR_2GB 1 +#define LDR_4GB 3 +#define LDR_UNKNOWN 0xFFFF uint8_t current_topology; uint8_t prev_topology; @@ -2484,12 +2510,26 @@ typedef struct scsi_qla_host { uint8_t *port_name; uint32_t isp_abort_cnt; + /* Option ROM information. */ + char *optrom_buffer; + uint32_t optrom_size; + int optrom_state; +#define QLA_SWAITING 0 +#define QLA_SREADING 1 +#define QLA_SWRITING 2 + /* Needed for BEACON */ uint16_t beacon_blink_led; - uint16_t beacon_green_on; + uint8_t beacon_color_state; +#define QLA_LED_GRN_ON 0x01 +#define QLA_LED_YLW_ON 0x02 +#define QLA_LED_ABR_ON 0x04 +#define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */ + /* ISP2322: red, green, amber. */ uint16_t zio_mode; uint16_t zio_timer; + struct fc_host_statistics fc_host_stat; } scsi_qla_host_t; @@ -2555,7 +2595,9 @@ struct _qla2x00stats { /* * Flash support definitions */ -#define FLASH_IMAGE_SIZE 131072 +#define OPTROM_SIZE_2300 0x20000 +#define OPTROM_SIZE_2322 0x100000 +#define OPTROM_SIZE_24XX 0x100000 #include "qla_gbl.h" #include "qla_dbg.h" |