summaryrefslogtreecommitdiff
path: root/drivers/scsi/qla2xxx
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/qla2xxx')
-rw-r--r--drivers/scsi/qla2xxx/qla_bsg.c163
-rw-r--r--drivers/scsi/qla2xxx/qla_def.h7
-rw-r--r--drivers/scsi/qla2xxx/qla_fw.h59
-rw-r--r--drivers/scsi/qla2xxx/qla_gbl.h9
-rw-r--r--drivers/scsi/qla2xxx/qla_init.c168
-rw-r--r--drivers/scsi/qla2xxx/qla_mbx.c47
-rw-r--r--drivers/scsi/qla2xxx/qla_sup.c69
7 files changed, 518 insertions, 4 deletions
diff --git a/drivers/scsi/qla2xxx/qla_bsg.c b/drivers/scsi/qla2xxx/qla_bsg.c
index c20292fde720..3c3a86ca6cbd 100644
--- a/drivers/scsi/qla2xxx/qla_bsg.c
+++ b/drivers/scsi/qla2xxx/qla_bsg.c
@@ -35,6 +35,166 @@ done:
return sp;
}
+int
+qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *pri_cfg, uint8_t flag)
+{
+ int i, ret, num_valid;
+ uint8_t *bcode;
+ struct qla_fcp_prio_entry *pri_entry;
+
+ ret = 1;
+ num_valid = 0;
+ bcode = (uint8_t *)pri_cfg;
+
+ if (bcode[0x0] != 'H' || bcode[0x1] != 'Q' || bcode[0x2] != 'O' ||
+ bcode[0x3] != 'S') {
+ return 0;
+ }
+ if (flag != 1)
+ return ret;
+
+ pri_entry = &pri_cfg->entry[0];
+ for (i = 0; i < pri_cfg->num_entries; i++) {
+ if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID)
+ num_valid++;
+ pri_entry++;
+ }
+
+ if (num_valid == 0)
+ ret = 0;
+
+ return ret;
+}
+
+static int
+qla24xx_proc_fcp_prio_cfg_cmd(struct fc_bsg_job *bsg_job)
+{
+ struct Scsi_Host *host = bsg_job->shost;
+ scsi_qla_host_t *vha = shost_priv(host);
+ struct qla_hw_data *ha = vha->hw;
+ int ret = 0;
+ uint32_t len;
+ uint32_t oper;
+
+ bsg_job->reply->reply_payload_rcv_len = 0;
+
+ if (test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
+ test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
+ test_bit(ISP_ABORT_RETRY, &vha->dpc_flags)) {
+ ret = -EBUSY;
+ goto exit_fcp_prio_cfg;
+ }
+
+ /* Get the sub command */
+ oper = bsg_job->request->rqst_data.h_vendor.vendor_cmd[1];
+
+ /* Only set config is allowed if config memory is not allocated */
+ if (!ha->fcp_prio_cfg && (oper != QLFC_FCP_PRIO_SET_CONFIG)) {
+ ret = -EINVAL;
+ goto exit_fcp_prio_cfg;
+ }
+ switch (oper) {
+ case QLFC_FCP_PRIO_DISABLE:
+ if (ha->flags.fcp_prio_enabled) {
+ ha->flags.fcp_prio_enabled = 0;
+ ha->fcp_prio_cfg->attributes &=
+ ~FCP_PRIO_ATTR_ENABLE;
+ qla24xx_update_all_fcp_prio(vha);
+ bsg_job->reply->result = DID_OK;
+ } else {
+ ret = -EINVAL;
+ bsg_job->reply->result = (DID_ERROR << 16);
+ goto exit_fcp_prio_cfg;
+ }
+ break;
+
+ case QLFC_FCP_PRIO_ENABLE:
+ if (!ha->flags.fcp_prio_enabled) {
+ if (ha->fcp_prio_cfg) {
+ ha->flags.fcp_prio_enabled = 1;
+ ha->fcp_prio_cfg->attributes |=
+ FCP_PRIO_ATTR_ENABLE;
+ qla24xx_update_all_fcp_prio(vha);
+ bsg_job->reply->result = DID_OK;
+ } else {
+ ret = -EINVAL;
+ bsg_job->reply->result = (DID_ERROR << 16);
+ goto exit_fcp_prio_cfg;
+ }
+ }
+ break;
+
+ case QLFC_FCP_PRIO_GET_CONFIG:
+ len = bsg_job->reply_payload.payload_len;
+ if (!len || len > FCP_PRIO_CFG_SIZE) {
+ ret = -EINVAL;
+ bsg_job->reply->result = (DID_ERROR << 16);
+ goto exit_fcp_prio_cfg;
+ }
+
+ bsg_job->reply->result = DID_OK;
+ bsg_job->reply->reply_payload_rcv_len =
+ sg_copy_from_buffer(
+ bsg_job->reply_payload.sg_list,
+ bsg_job->reply_payload.sg_cnt, ha->fcp_prio_cfg,
+ len);
+
+ break;
+
+ case QLFC_FCP_PRIO_SET_CONFIG:
+ len = bsg_job->request_payload.payload_len;
+ if (!len || len > FCP_PRIO_CFG_SIZE) {
+ bsg_job->reply->result = (DID_ERROR << 16);
+ ret = -EINVAL;
+ goto exit_fcp_prio_cfg;
+ }
+
+ if (!ha->fcp_prio_cfg) {
+ ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
+ if (!ha->fcp_prio_cfg) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate memory "
+ "for fcp prio config data (%x).\n",
+ FCP_PRIO_CFG_SIZE);
+ bsg_job->reply->result = (DID_ERROR << 16);
+ ret = -ENOMEM;
+ goto exit_fcp_prio_cfg;
+ }
+ }
+
+ memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
+ sg_copy_to_buffer(bsg_job->request_payload.sg_list,
+ bsg_job->request_payload.sg_cnt, ha->fcp_prio_cfg,
+ FCP_PRIO_CFG_SIZE);
+
+ /* validate fcp priority data */
+ if (!qla24xx_fcp_prio_cfg_valid(
+ (struct qla_fcp_prio_cfg *)
+ ha->fcp_prio_cfg, 1)) {
+ bsg_job->reply->result = (DID_ERROR << 16);
+ ret = -EINVAL;
+ /* If buffer was invalidatic int
+ * fcp_prio_cfg is of no use
+ */
+ vfree(ha->fcp_prio_cfg);
+ ha->fcp_prio_cfg = NULL;
+ goto exit_fcp_prio_cfg;
+ }
+
+ ha->flags.fcp_prio_enabled = 0;
+ if (ha->fcp_prio_cfg->attributes & FCP_PRIO_ATTR_ENABLE)
+ ha->flags.fcp_prio_enabled = 1;
+ qla24xx_update_all_fcp_prio(vha);
+ bsg_job->reply->result = DID_OK;
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+exit_fcp_prio_cfg:
+ bsg_job->job_done(bsg_job);
+ return ret;
+}
static int
qla2x00_process_els(struct fc_bsg_job *bsg_job)
{
@@ -948,6 +1108,9 @@ qla2x00_process_vendor_specific(struct fc_bsg_job *bsg_job)
case QL_VND_IIDMA:
return qla24xx_iidma(bsg_job);
+ case QL_VND_FCP_PRIO_CFG_CMD:
+ return qla24xx_proc_fcp_prio_cfg_cmd(bsg_job);
+
default:
bsg_job->reply->result = (DID_ERROR << 16);
bsg_job->job_done(bsg_job);
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 608397bf7e0a..c51bd4e5fb44 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -1580,6 +1580,8 @@ typedef struct fc_port {
uint16_t loop_id;
uint16_t old_loop_id;
+ uint8_t fcp_prio;
+
uint8_t fabric_port_name[WWN_SIZE];
uint16_t fp_speed;
@@ -2296,6 +2298,7 @@ struct qla_hw_data {
uint32_t eeh_busy :1;
uint32_t cpu_affinity_enabled :1;
uint32_t disable_msix_handshake :1;
+ uint32_t fcp_prio_enabled :1;
} flags;
/* This spinlock is used to protect "io transactions", you must
@@ -2599,6 +2602,7 @@ struct qla_hw_data {
uint32_t flt_region_nvram;
uint32_t flt_region_npiv_conf;
uint32_t flt_region_gold_fw;
+ uint32_t flt_region_fcp_prio;
/* Needed for BEACON */
uint16_t beacon_blink_led;
@@ -2627,6 +2631,9 @@ struct qla_hw_data {
struct isp_operations *isp_ops;
struct workqueue_struct *wq;
struct qlfc_fw fw_buf;
+
+ /* FCP_CMND priority support */
+ struct qla_fcp_prio_cfg *fcp_prio_cfg;
};
/*
diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h
index 42c5587cc50c..a77a2471eaff 100644
--- a/drivers/scsi/qla2xxx/qla_fw.h
+++ b/drivers/scsi/qla2xxx/qla_fw.h
@@ -841,6 +841,8 @@ struct device_reg_24xx {
#define FA_HW_EVENT_ENTRY_SIZE 4
#define FA_NPIV_CONF0_ADDR 0x5C000
#define FA_NPIV_CONF1_ADDR 0x5D000
+#define FA_FCP_PRIO0_ADDR 0x10000
+#define FA_FCP_PRIO1_ADDR 0x12000
/*
* Flash Error Log Event Codes.
@@ -1274,6 +1276,8 @@ struct qla_flt_header {
#define FLT_REG_NPIV_CONF_0 0x29
#define FLT_REG_NPIV_CONF_1 0x2a
#define FLT_REG_GOLD_FW 0x2f
+#define FLT_REG_FCP_PRIO_0 0x87
+#define FLT_REG_FCP_PRIO_1 0x88
struct qla_flt_region {
uint32_t code;
@@ -1750,6 +1754,61 @@ struct ex_init_cb_81xx {
#define FARX_ACCESS_FLASH_CONF_81XX 0x7FFD0000
#define FARX_ACCESS_FLASH_DATA_81XX 0x7F800000
+/* FCP priority config defines *************************************/
+/* operations */
+#define QLFC_FCP_PRIO_DISABLE 0x0
+#define QLFC_FCP_PRIO_ENABLE 0x1
+#define QLFC_FCP_PRIO_GET_CONFIG 0x2
+#define QLFC_FCP_PRIO_SET_CONFIG 0x3
+
+struct qla_fcp_prio_entry {
+ uint16_t flags; /* Describes parameter(s) in FCP */
+ /* priority entry that are valid */
+#define FCP_PRIO_ENTRY_VALID 0x1
+#define FCP_PRIO_ENTRY_TAG_VALID 0x2
+#define FCP_PRIO_ENTRY_SPID_VALID 0x4
+#define FCP_PRIO_ENTRY_DPID_VALID 0x8
+#define FCP_PRIO_ENTRY_LUNB_VALID 0x10
+#define FCP_PRIO_ENTRY_LUNE_VALID 0x20
+#define FCP_PRIO_ENTRY_SWWN_VALID 0x40
+#define FCP_PRIO_ENTRY_DWWN_VALID 0x80
+ uint8_t tag; /* Priority value */
+ uint8_t reserved; /* Reserved for future use */
+ uint32_t src_pid; /* Src port id. high order byte */
+ /* unused; -1 (wild card) */
+ uint32_t dst_pid; /* Src port id. high order byte */
+ /* unused; -1 (wild card) */
+ uint16_t lun_beg; /* 1st lun num of lun range. */
+ /* -1 (wild card) */
+ uint16_t lun_end; /* 2nd lun num of lun range. */
+ /* -1 (wild card) */
+ uint8_t src_wwpn[8]; /* Source WWPN: -1 (wild card) */
+ uint8_t dst_wwpn[8]; /* Destination WWPN: -1 (wild card) */
+};
+
+struct qla_fcp_prio_cfg {
+ uint8_t signature[4]; /* "HQOS" signature of config data */
+ uint16_t version; /* 1: Initial version */
+ uint16_t length; /* config data size in num bytes */
+ uint16_t checksum; /* config data bytes checksum */
+ uint16_t num_entries; /* Number of entries */
+ uint16_t size_of_entry; /* Size of each entry in num bytes */
+ uint8_t attributes; /* enable/disable, persistence */
+#define FCP_PRIO_ATTR_DISABLE 0x0
+#define FCP_PRIO_ATTR_ENABLE 0x1
+#define FCP_PRIO_ATTR_PERSIST 0x2
+ uint8_t reserved; /* Reserved for future use */
+#define FCP_PRIO_CFG_HDR_SIZE 0x10
+ struct qla_fcp_prio_entry entry[1]; /* fcp priority entries */
+#define FCP_PRIO_CFG_ENTRY_SIZE 0x20
+};
+
+#define FCP_PRIO_CFG_SIZE (32*1024) /* fcp prio data per port*/
+
+/* 25XX Support ****************************************************/
+#define FA_FCP_PRIO0_ADDR_25 0x3C000
+#define FA_FCP_PRIO1_ADDR_25 0x3E000
+
/* 81XX Flash locations -- occupies second 2MB region. */
#define FA_BOOT_CODE_ADDR_81 0x80000
#define FA_RISC_CODE_ADDR_81 0xA0000
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index c1f1736dcdad..5efd4c05c79b 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -328,6 +328,9 @@ extern int
qla2x00_write_ram_word(scsi_qla_host_t *, uint32_t, uint32_t);
extern int qla2x00_get_data_rate(scsi_qla_host_t *);
+extern int qla24xx_set_fcp_prio(scsi_qla_host_t *, uint16_t, uint16_t,
+ uint16_t *);
+
/*
* Global Function Prototypes in qla_isr.c source file.
*/
@@ -384,6 +387,7 @@ extern int qla2xxx_get_flash_info(scsi_qla_host_t *);
extern int qla2xxx_get_vpd_field(scsi_qla_host_t *, char *, char *, size_t);
extern void qla2xxx_flash_npiv_conf(scsi_qla_host_t *);
+extern int qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *);
/*
* Global Function Prototypes in qla_dbg.c source file.
@@ -430,7 +434,10 @@ extern void qla2x00_init_host_attr(scsi_qla_host_t *);
extern void qla2x00_alloc_sysfs_attr(scsi_qla_host_t *);
extern void qla2x00_free_sysfs_attr(scsi_qla_host_t *);
extern int qla2x00_loopback_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *);
-extern int qla2x00_echo_test(scsi_qla_host_t *, struct msg_echo_lb *, uint16_t *);
+extern int qla2x00_echo_test(scsi_qla_host_t *,
+ struct msg_echo_lb *, uint16_t *);
+extern int qla24xx_update_all_fcp_prio(scsi_qla_host_t *);
+extern int qla24xx_fcp_prio_cfg_valid(struct qla_fcp_prio_cfg *, uint8_t);
/*
* Global Function Prototypes in qla_dfs.c source file.
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 4229bb483c5e..e7fe11486bb8 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -349,6 +349,12 @@ qla2x00_initialize_adapter(scsi_qla_host_t *vha)
}
}
+ if (IS_QLA24XX_TYPE(ha) || IS_QLA25XX(ha)) {
+ if (qla24xx_read_fcp_prio_cfg(vha))
+ qla_printk(KERN_ERR, ha,
+ "Unable to read FCP priority data.\n");
+ }
+
return (rval);
}
@@ -4905,3 +4911,165 @@ qla81xx_update_fw_options(scsi_qla_host_t *vha)
ha->fw_options[2] |= BIT_9;
qla2x00_set_fw_options(vha, ha->fw_options);
}
+
+/*
+ * qla24xx_get_fcp_prio
+ * Gets the fcp cmd priority value for the logged in port.
+ * Looks for a match of the port descriptors within
+ * each of the fcp prio config entries. If a match is found,
+ * the tag (priority) value is returned.
+ *
+ * Input:
+ * ha = adapter block po
+ * fcport = port structure pointer.
+ *
+ * Return:
+ * non-zero (if found)
+ * 0 (if not found)
+ *
+ * Context:
+ * Kernel context
+ */
+uint8_t
+qla24xx_get_fcp_prio(scsi_qla_host_t *vha, fc_port_t *fcport)
+{
+ int i, entries;
+ uint8_t pid_match, wwn_match;
+ uint8_t priority;
+ uint32_t pid1, pid2;
+ uint64_t wwn1, wwn2;
+ struct qla_fcp_prio_entry *pri_entry;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!ha->fcp_prio_cfg || !ha->flags.fcp_prio_enabled)
+ return 0;
+
+ priority = 0;
+ entries = ha->fcp_prio_cfg->num_entries;
+ pri_entry = &ha->fcp_prio_cfg->entry[0];
+
+ for (i = 0; i < entries; i++) {
+ pid_match = wwn_match = 0;
+
+ if (!(pri_entry->flags & FCP_PRIO_ENTRY_VALID)) {
+ pri_entry++;
+ continue;
+ }
+
+ /* check source pid for a match */
+ if (pri_entry->flags & FCP_PRIO_ENTRY_SPID_VALID) {
+ pid1 = pri_entry->src_pid & INVALID_PORT_ID;
+ pid2 = vha->d_id.b24 & INVALID_PORT_ID;
+ if (pid1 == INVALID_PORT_ID)
+ pid_match++;
+ else if (pid1 == pid2)
+ pid_match++;
+ }
+
+ /* check destination pid for a match */
+ if (pri_entry->flags & FCP_PRIO_ENTRY_DPID_VALID) {
+ pid1 = pri_entry->dst_pid & INVALID_PORT_ID;
+ pid2 = fcport->d_id.b24 & INVALID_PORT_ID;
+ if (pid1 == INVALID_PORT_ID)
+ pid_match++;
+ else if (pid1 == pid2)
+ pid_match++;
+ }
+
+ /* check source WWN for a match */
+ if (pri_entry->flags & FCP_PRIO_ENTRY_SWWN_VALID) {
+ wwn1 = wwn_to_u64(vha->port_name);
+ wwn2 = wwn_to_u64(pri_entry->src_wwpn);
+ if (wwn2 == (uint64_t)-1)
+ wwn_match++;
+ else if (wwn1 == wwn2)
+ wwn_match++;
+ }
+
+ /* check destination WWN for a match */
+ if (pri_entry->flags & FCP_PRIO_ENTRY_DWWN_VALID) {
+ wwn1 = wwn_to_u64(fcport->port_name);
+ wwn2 = wwn_to_u64(pri_entry->dst_wwpn);
+ if (wwn2 == (uint64_t)-1)
+ wwn_match++;
+ else if (wwn1 == wwn2)
+ wwn_match++;
+ }
+
+ if (pid_match == 2 || wwn_match == 2) {
+ /* Found a matching entry */
+ if (pri_entry->flags & FCP_PRIO_ENTRY_TAG_VALID)
+ priority = pri_entry->tag;
+ break;
+ }
+
+ pri_entry++;
+ }
+
+ return priority;
+}
+
+/*
+ * qla24xx_update_fcport_fcp_prio
+ * Activates fcp priority for the logged in fc port
+ *
+ * Input:
+ * ha = adapter block pointer.
+ * fcp = port structure pointer.
+ *
+ * Return:
+ * QLA_SUCCESS or QLA_FUNCTION_FAILED
+ *
+ * Context:
+ * Kernel context.
+ */
+int
+qla24xx_update_fcport_fcp_prio(scsi_qla_host_t *ha, fc_port_t *fcport)
+{
+ int ret;
+ uint8_t priority;
+ uint16_t mb[5];
+
+ if (atomic_read(&fcport->state) == FCS_UNCONFIGURED ||
+ fcport->port_type != FCT_TARGET ||
+ fcport->loop_id == FC_NO_LOOP_ID)
+ return QLA_FUNCTION_FAILED;
+
+ priority = qla24xx_get_fcp_prio(ha, fcport);
+ ret = qla24xx_set_fcp_prio(ha, fcport->loop_id, priority, mb);
+ if (ret == QLA_SUCCESS)
+ fcport->fcp_prio = priority;
+ else
+ DEBUG2(printk(KERN_WARNING
+ "scsi(%ld): Unable to activate fcp priority, "
+ " ret=0x%x\n", ha->host_no, ret));
+
+ return ret;
+}
+
+/*
+ * qla24xx_update_all_fcp_prio
+ * Activates fcp priority for all the logged in ports
+ *
+ * Input:
+ * ha = adapter block pointer.
+ *
+ * Return:
+ * QLA_SUCCESS or QLA_FUNCTION_FAILED
+ *
+ * Context:
+ * Kernel context.
+ */
+int
+qla24xx_update_all_fcp_prio(scsi_qla_host_t *vha)
+{
+ int ret;
+ fc_port_t *fcport;
+
+ ret = QLA_FUNCTION_FAILED;
+ /* We need to set priority for all logged in ports */
+ list_for_each_entry(fcport, &vha->vp_fcports, list)
+ ret = qla24xx_update_fcport_fcp_prio(vha, fcport);
+
+ return ret;
+}
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 7f3bc45d2e20..e9c9f82c1d87 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -3896,3 +3896,50 @@ qla2x00_get_data_rate(scsi_qla_host_t *vha)
return rval;
}
+
+int
+qla24xx_set_fcp_prio(scsi_qla_host_t *vha, uint16_t loop_id, uint16_t priority,
+ uint16_t *mb)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!IS_QLA24XX_TYPE(ha) && !IS_QLA25XX(ha))
+ return QLA_FUNCTION_FAILED;
+
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): entered.\n", __func__, ha->host_no));
+
+ mcp->mb[0] = MBC_PORT_PARAMS;
+ mcp->mb[1] = loop_id;
+ if (ha->flags.fcp_prio_enabled)
+ mcp->mb[2] = BIT_1;
+ else
+ mcp->mb[2] = BIT_2;
+ mcp->mb[4] = priority & 0xf;
+ mcp->mb[9] = vha->vp_idx;
+ mcp->out_mb = MBX_9|MBX_4|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_4|MBX_3|MBX_1|MBX_0;
+ mcp->tov = 30;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (mb != NULL) {
+ mb[0] = mcp->mb[0];
+ mb[1] = mcp->mb[1];
+ mb[3] = mcp->mb[3];
+ mb[4] = mcp->mb[4];
+ }
+
+ if (rval != QLA_SUCCESS) {
+ DEBUG2_3_11(printk(KERN_WARNING
+ "%s(%ld): failed=%x.\n", __func__,
+ vha->host_no, rval));
+ } else {
+ DEBUG11(printk(KERN_INFO
+ "%s(%ld): done.\n", __func__, vha->host_no));
+ }
+
+ return rval;
+}
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index 8b3de4e54c28..f32a4b032967 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -648,6 +648,12 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
const uint32_t def_npiv_conf1[] =
{ FA_NPIV_CONF1_ADDR_24, FA_NPIV_CONF1_ADDR,
FA_NPIV_CONF1_ADDR_81 };
+ const uint32_t fcp_prio_cfg0[] =
+ { FA_FCP_PRIO0_ADDR, FA_FCP_PRIO0_ADDR_25,
+ 0 };
+ const uint32_t fcp_prio_cfg1[] =
+ { FA_FCP_PRIO1_ADDR, FA_FCP_PRIO1_ADDR_25,
+ 0 };
uint32_t def;
uint16_t *wptr;
uint16_t cnt, chksum;
@@ -732,6 +738,14 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
case FLT_REG_GOLD_FW:
ha->flt_region_gold_fw = start;
break;
+ case FLT_REG_FCP_PRIO_0:
+ if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+ ha->flt_region_fcp_prio = start;
+ break;
+ case FLT_REG_FCP_PRIO_1:
+ if (PCI_FUNC(ha->pdev->devfn) & 1)
+ ha->flt_region_fcp_prio = start;
+ break;
}
}
goto done;
@@ -750,12 +764,14 @@ no_flash_data:
ha->flt_region_boot = def_boot[def];
ha->flt_region_vpd_nvram = def_vpd_nvram[def];
ha->flt_region_vpd = ha->flags.port0 ?
- def_vpd0[def]: def_vpd1[def];
+ def_vpd0[def] : def_vpd1[def];
ha->flt_region_nvram = ha->flags.port0 ?
- def_nvram0[def]: def_nvram1[def];
+ def_nvram0[def] : def_nvram1[def];
ha->flt_region_fdt = def_fdt[def];
ha->flt_region_npiv_conf = ha->flags.port0 ?
- def_npiv_conf0[def]: def_npiv_conf1[def];
+ def_npiv_conf0[def] : def_npiv_conf1[def];
+ ha->flt_region_fcp_prio = ha->flags.port0 ?
+ fcp_prio_cfg0[def] : fcp_prio_cfg1[def];
done:
DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "
"vpd_nvram=0x%x vpd=0x%x nvram=0x%x fdt=0x%x flt=0x%x "
@@ -2722,3 +2738,50 @@ qla2xxx_get_vpd_field(scsi_qla_host_t *vha, char *key, char *str, size_t size)
return 0;
}
+
+int
+qla24xx_read_fcp_prio_cfg(scsi_qla_host_t *vha)
+{
+ int len, max_len;
+ uint32_t fcp_prio_addr;
+ struct qla_hw_data *ha = vha->hw;
+
+ if (!ha->fcp_prio_cfg) {
+ ha->fcp_prio_cfg = vmalloc(FCP_PRIO_CFG_SIZE);
+ if (!ha->fcp_prio_cfg) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to allocate memory for fcp priority data "
+ "(%x).\n", FCP_PRIO_CFG_SIZE);
+ return QLA_FUNCTION_FAILED;
+ }
+ }
+ memset(ha->fcp_prio_cfg, 0, FCP_PRIO_CFG_SIZE);
+
+ fcp_prio_addr = ha->flt_region_fcp_prio;
+
+ /* first read the fcp priority data header from flash */
+ ha->isp_ops->read_optrom(vha, (uint8_t *)ha->fcp_prio_cfg,
+ fcp_prio_addr << 2, FCP_PRIO_CFG_HDR_SIZE);
+
+ if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 0))
+ goto fail;
+
+ /* read remaining FCP CMD config data from flash */
+ fcp_prio_addr += (FCP_PRIO_CFG_HDR_SIZE >> 2);
+ len = ha->fcp_prio_cfg->num_entries * FCP_PRIO_CFG_ENTRY_SIZE;
+ max_len = FCP_PRIO_CFG_SIZE - FCP_PRIO_CFG_HDR_SIZE;
+
+ ha->isp_ops->read_optrom(vha, (uint8_t *)&ha->fcp_prio_cfg->entry[0],
+ fcp_prio_addr << 2, (len < max_len ? len : max_len));
+
+ /* revalidate the entire FCP priority config data, including entries */
+ if (!qla24xx_fcp_prio_cfg_valid(ha->fcp_prio_cfg, 1))
+ goto fail;
+
+ ha->flags.fcp_prio_enabled = 1;
+ return QLA_SUCCESS;
+fail:
+ vfree(ha->fcp_prio_cfg);
+ ha->fcp_prio_cfg = NULL;
+ return QLA_FUNCTION_FAILED;
+}
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-04 01:07:31 +0000