diff options
Diffstat (limited to 'drivers/scsi/qla4xxx')
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_def.h | 36 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_fw.h | 20 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_glbl.h | 2 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_init.c | 14 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_iocb.c | 2 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_isr.c | 3 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_mbx.c | 48 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_nx.c | 18 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_os.c | 315 | ||||
-rw-r--r-- | drivers/scsi/qla4xxx/ql4_version.h | 2 |
10 files changed, 432 insertions, 28 deletions
diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index a79da8dd2064..9dc0a6616edd 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -36,6 +36,24 @@ #include "ql4_dbg.h" #include "ql4_nx.h" +#if defined(CONFIG_PCIEAER) +#include <linux/aer.h> +#else +/* AER releated */ +static inline int pci_enable_pcie_error_reporting(struct pci_dev *dev) +{ + return -EINVAL; +} +static inline int pci_disable_pcie_error_reporting(struct pci_dev *dev) +{ + return -EINVAL; +} +static inline int pci_cleanup_aer_uncorrect_error_status(struct pci_dev *dev) +{ + return -EINVAL; +} +#endif + #ifndef PCI_DEVICE_ID_QLOGIC_ISP4010 #define PCI_DEVICE_ID_QLOGIC_ISP4010 0x4010 #endif @@ -137,6 +155,9 @@ #define ISCSI_ALIAS_SIZE 32 /* ISCSI Alias name size */ #define ISCSI_NAME_SIZE 0xE0 /* ISCSI Name size */ +#define QL4_SESS_RECOVERY_TMO 30 /* iSCSI session */ + /* recovery timeout */ + #define LSDW(x) ((u32)((u64)(x))) #define MSDW(x) ((u32)((((u64)(x)) >> 16) >> 16)) @@ -249,7 +270,6 @@ struct ddb_entry { uint32_t default_time2wait; /* Default Min time between * relogins (+aens) */ - atomic_t port_down_timer; /* Device connection timer */ atomic_t retry_relogin_timer; /* Min Time between relogins * (4000 only) */ atomic_t relogin_timer; /* Max Time to wait for relogin to complete */ @@ -378,7 +398,9 @@ struct scsi_qla_host { #define AF_MSI_ENABLED 16 /* 0x00010000 */ #define AF_MSIX_ENABLED 17 /* 0x00020000 */ #define AF_MBOX_COMMAND_NOPOLL 18 /* 0x00040000 */ - +#define AF_FW_RECOVERY 19 /* 0x00080000 */ +#define AF_EEH_BUSY 20 /* 0x00100000 */ +#define AF_PCI_CHANNEL_IO_PERM_FAILURE 21 /* 0x00200000 */ unsigned long dpc_flags; @@ -474,7 +496,6 @@ struct scsi_qla_host { uint32_t timer_active; /* Recovery Timers */ - uint32_t port_down_retry_count; uint32_t discovery_wait; atomic_t check_relogin_timeouts; uint32_t retry_reset_ha_cnt; @@ -615,6 +636,15 @@ static inline int is_qla8022(struct scsi_qla_host *ha) return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022; } +/* Note: Currently AER/EEH is now supported only for 8022 cards + * This function needs to be updated when AER/EEH is enabled + * for other cards. + */ +static inline int is_aer_supported(struct scsi_qla_host *ha) +{ + return ha->pdev->device == PCI_DEVICE_ID_QLOGIC_ISP8022; +} + static inline int adapter_up(struct scsi_qla_host *ha) { return (test_bit(AF_ONLINE, &ha->flags) != 0) && diff --git a/drivers/scsi/qla4xxx/ql4_fw.h b/drivers/scsi/qla4xxx/ql4_fw.h index c94c9ddfb3a6..0336c6db8cb3 100644 --- a/drivers/scsi/qla4xxx/ql4_fw.h +++ b/drivers/scsi/qla4xxx/ql4_fw.h @@ -673,17 +673,17 @@ struct flash_sys_info { }; /* 200 */ struct mbx_sys_info { - uint8_t board_id_str[16]; /* Keep board ID string first */ - /* in this structure for GUI. */ - uint16_t board_id; /* board ID code */ - uint16_t phys_port_cnt; /* number of physical network ports */ - uint16_t port_num; /* network port for this PCI function */ + uint8_t board_id_str[16]; /* 0-f Keep board ID string first */ + /* in this structure for GUI. */ + uint16_t board_id; /* 10-11 board ID code */ + uint16_t phys_port_cnt; /* 12-13 number of physical network ports */ + uint16_t port_num; /* 14-15 network port for this PCI function */ /* (port 0 is first port) */ - uint8_t mac_addr[6]; /* MAC address for this PCI function */ - uint32_t iscsi_pci_func_cnt; /* number of iSCSI PCI functions */ - uint32_t pci_func; /* this PCI function */ - unsigned char serial_number[16]; /* serial number string */ - uint8_t reserved[16]; + uint8_t mac_addr[6]; /* 16-1b MAC address for this PCI function */ + uint32_t iscsi_pci_func_cnt; /* 1c-1f number of iSCSI PCI functions */ + uint32_t pci_func; /* 20-23 this PCI function */ + unsigned char serial_number[16]; /* 24-33 serial number string */ + uint8_t reserved[12]; /* 34-3f */ }; struct crash_record { diff --git a/drivers/scsi/qla4xxx/ql4_glbl.h b/drivers/scsi/qla4xxx/ql4_glbl.h index c9cd5d6db982..95a26fb1626c 100644 --- a/drivers/scsi/qla4xxx/ql4_glbl.h +++ b/drivers/scsi/qla4xxx/ql4_glbl.h @@ -93,6 +93,7 @@ void qla4xxx_free_irqs(struct scsi_qla_host *ha); void qla4xxx_process_response_queue(struct scsi_qla_host *ha); void qla4xxx_wake_dpc(struct scsi_qla_host *ha); void qla4xxx_get_conn_event_log(struct scsi_qla_host *ha); +void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha); void qla4_8xxx_pci_config(struct scsi_qla_host *); int qla4_8xxx_iospace_config(struct scsi_qla_host *ha); @@ -131,6 +132,7 @@ void qla4_8xxx_idc_unlock(struct scsi_qla_host *ha); int qla4_8xxx_device_state_handler(struct scsi_qla_host *ha); void qla4_8xxx_need_qsnt_handler(struct scsi_qla_host *ha); void qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha); +void qla4_8xxx_set_drv_active(struct scsi_qla_host *ha); extern int ql4xextended_error_logging; extern int ql4xdiscoverywait; diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 30073577c3a4..4c9be77ee70b 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -308,7 +308,6 @@ static int qla4xxx_fw_ready(struct scsi_qla_host *ha) DEBUG2(printk("scsi%ld: %s: unable to get firmware " "state\n", ha->host_no, __func__)); break; - } if (ha->firmware_state & FW_STATE_ERROR) { @@ -445,6 +444,16 @@ static int qla4xxx_init_firmware(struct scsi_qla_host *ha) { int status = QLA_ERROR; + if (is_aer_supported(ha) && + test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags)) + return status; + + /* For 82xx, stop firmware before initializing because if BIOS + * has previously initialized firmware, then driver's initialize + * firmware will fail. */ + if (is_qla8022(ha)) + qla4_8xxx_stop_firmware(ha); + ql4_printk(KERN_INFO, ha, "Initializing firmware..\n"); if (qla4xxx_initialize_fw_cb(ha) == QLA_ERROR) { DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware " @@ -669,7 +678,6 @@ static struct ddb_entry * qla4xxx_alloc_ddb(struct scsi_qla_host *ha, } ddb_entry->fw_ddb_index = fw_ddb_index; - atomic_set(&ddb_entry->port_down_timer, ha->port_down_retry_count); atomic_set(&ddb_entry->retry_relogin_timer, INVALID_ENTRY); atomic_set(&ddb_entry->relogin_timer, 0); atomic_set(&ddb_entry->relogin_retry_count, 0); @@ -1556,8 +1564,6 @@ int qla4xxx_process_ddb_changed(struct scsi_qla_host *ha, uint32_t fw_ddb_index, /* Device is back online. */ if (ddb_entry->fw_ddb_device_state == DDB_DS_SESSION_ACTIVE) { atomic_set(&ddb_entry->state, DDB_STATE_ONLINE); - atomic_set(&ddb_entry->port_down_timer, - ha->port_down_retry_count); atomic_set(&ddb_entry->relogin_retry_count, 0); atomic_set(&ddb_entry->relogin_timer, 0); clear_bit(DF_RELOGIN, &ddb_entry->flags); diff --git a/drivers/scsi/qla4xxx/ql4_iocb.c b/drivers/scsi/qla4xxx/ql4_iocb.c index f89973deac5b..4ef9ba112ee8 100644 --- a/drivers/scsi/qla4xxx/ql4_iocb.c +++ b/drivers/scsi/qla4xxx/ql4_iocb.c @@ -19,7 +19,7 @@ qla4xxx_space_in_req_ring(struct scsi_qla_host *ha, uint16_t req_cnt) /* Calculate number of free request entries. */ if ((req_cnt + 2) >= ha->req_q_count) { - cnt = (uint16_t) le32_to_cpu(ha->shadow_regs->req_q_out); + cnt = (uint16_t) ha->isp_ops->rd_shdw_req_q_out(ha); if (ha->request_in < cnt) ha->req_q_count = cnt - ha->request_in; else diff --git a/drivers/scsi/qla4xxx/ql4_isr.c b/drivers/scsi/qla4xxx/ql4_isr.c index aa65697a86b4..2a1ab63f3eb0 100644 --- a/drivers/scsi/qla4xxx/ql4_isr.c +++ b/drivers/scsi/qla4xxx/ql4_isr.c @@ -816,6 +816,9 @@ irqreturn_t qla4_8xxx_intr_handler(int irq, void *dev_id) unsigned long flags = 0; uint8_t reqs_count = 0; + if (unlikely(pci_channel_offline(ha->pdev))) + return IRQ_HANDLED; + ha->isr_count++; status = qla4_8xxx_rd_32(ha, ISR_INT_VECTOR); if (!(status & ha->nx_legacy_intr.int_vec_bit)) diff --git a/drivers/scsi/qla4xxx/ql4_mbx.c b/drivers/scsi/qla4xxx/ql4_mbx.c index 940ee561ee0a..90021704d8ca 100644 --- a/drivers/scsi/qla4xxx/ql4_mbx.c +++ b/drivers/scsi/qla4xxx/ql4_mbx.c @@ -39,6 +39,22 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, "pointer\n", ha->host_no, __func__)); return status; } + + if (is_qla8022(ha) && + test_bit(AF_FW_RECOVERY, &ha->flags)) { + DEBUG2(ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: prematurely " + "completing mbx cmd as firmware recovery detected\n", + ha->host_no, __func__)); + return status; + } + + if ((is_aer_supported(ha)) && + (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags))) { + DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, " + "timeout MBX Exiting.\n", ha->host_no, __func__)); + return status; + } + /* Mailbox code active */ wait_count = MBOX_TOV * 100; @@ -150,6 +166,7 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, while (test_bit(AF_MBOX_COMMAND_DONE, &ha->flags) == 0) { if (time_after_eq(jiffies, wait_count)) break; + /* * Service the interrupt. * The ISR will save the mailbox status registers @@ -196,6 +213,14 @@ int qla4xxx_mailbox_command(struct scsi_qla_host *ha, uint8_t inCount, /* Check for mailbox timeout. */ if (!test_bit(AF_MBOX_COMMAND_DONE, &ha->flags)) { + if (is_qla8022(ha) && + test_bit(AF_FW_RECOVERY, &ha->flags)) { + DEBUG2(ql4_printk(KERN_INFO, ha, + "scsi%ld: %s: prematurely completing mbx cmd as " + "firmware recovery detected\n", + ha->host_no, __func__)); + goto mbox_exit; + } DEBUG2(printk("scsi%ld: Mailbox Cmd 0x%08X timed out ...," " Scheduling Adapter Reset\n", ha->host_no, mbx_cmd[0])); @@ -246,6 +271,28 @@ mbox_exit: return status; } +void qla4xxx_mailbox_premature_completion(struct scsi_qla_host *ha) +{ + set_bit(AF_FW_RECOVERY, &ha->flags); + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: set FW RECOVERY!\n", + ha->host_no, __func__); + + if (test_bit(AF_MBOX_COMMAND, &ha->flags)) { + if (test_bit(AF_MBOX_COMMAND_NOPOLL, &ha->flags)) { + complete(&ha->mbx_intr_comp); + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw " + "recovery, doing premature completion of " + "mbx cmd\n", ha->host_no, __func__); + + } else { + set_bit(AF_MBOX_COMMAND_DONE, &ha->flags); + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Due to fw " + "recovery, doing premature completion of " + "polling mbx cmd\n", ha->host_no, __func__); + } + } +} + static uint8_t qla4xxx_set_ifcb(struct scsi_qla_host *ha, uint32_t *mbox_cmd, uint32_t *mbox_sts, dma_addr_t init_fw_cb_dma) @@ -361,7 +408,6 @@ qla4xxx_update_local_ifcb(struct scsi_qla_host *ha, min(sizeof(ha->alias), sizeof(init_fw_cb->Alias)));*/ /* Save Command Line Paramater info */ - ha->port_down_retry_count = le16_to_cpu(init_fw_cb->conn_ka_timeout); ha->discovery_wait = ql4xdiscoverywait; if (ha->acb_version == ACB_SUPPORTED) { diff --git a/drivers/scsi/qla4xxx/ql4_nx.c b/drivers/scsi/qla4xxx/ql4_nx.c index 3e119ae78397..449256f2c5f8 100644 --- a/drivers/scsi/qla4xxx/ql4_nx.c +++ b/drivers/scsi/qla4xxx/ql4_nx.c @@ -5,6 +5,7 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ #include <linux/delay.h> +#include <linux/io.h> #include <linux/pci.h> #include "ql4_def.h" #include "ql4_glbl.h" @@ -1418,7 +1419,7 @@ static int qla4_8xxx_rcvpeg_ready(struct scsi_qla_host *ha) return QLA_SUCCESS; } -static inline void +void qla4_8xxx_set_drv_active(struct scsi_qla_host *ha) { uint32_t drv_active; @@ -1441,11 +1442,15 @@ qla4_8xxx_clear_drv_active(struct scsi_qla_host *ha) static inline int qla4_8xxx_need_reset(struct scsi_qla_host *ha) { - uint32_t drv_state; + uint32_t drv_state, drv_active; int rval; + drv_active = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_ACTIVE); drv_state = qla4_8xxx_rd_32(ha, QLA82XX_CRB_DRV_STATE); rval = drv_state & (1 << (ha->func_num * 4)); + if ((test_bit(AF_EEH_BUSY, &ha->flags)) && drv_active) + rval = 1; + return rval; } @@ -1949,7 +1954,8 @@ qla4_8xxx_get_fdt_info(struct scsi_qla_host *ha) uint16_t cnt, chksum; uint16_t *wptr; struct qla_fdt_layout *fdt; - uint16_t mid, fid; + uint16_t mid = 0; + uint16_t fid = 0; struct ql82xx_hw_data *hw = &ha->hw; hw->flash_conf_off = FARX_ACCESS_FLASH_CONF; @@ -2105,6 +2111,9 @@ qla4_8xxx_isp_reset(struct scsi_qla_host *ha) qla4_8xxx_clear_rst_ready(ha); qla4_8xxx_idc_unlock(ha); + if (rval == QLA_SUCCESS) + clear_bit(AF_FW_RECOVERY, &ha->flags); + return rval; } @@ -2145,7 +2154,8 @@ int qla4_8xxx_get_sys_info(struct scsi_qla_host *ha) goto exit_validate_mac82; } - if (mbox_sts[4] < sizeof(*sys_info)) { + /* Make sure we receive the minimum required data to cache internally */ + if (mbox_sts[4] < offsetof(struct mbx_sys_info, reserved)) { DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO data receive" " error (%x)\n", ha->host_no, __func__, mbox_sts[4])); goto exit_validate_mac82; diff --git a/drivers/scsi/qla4xxx/ql4_os.c b/drivers/scsi/qla4xxx/ql4_os.c index 5529b2a39741..370d40ff1529 100644 --- a/drivers/scsi/qla4xxx/ql4_os.c +++ b/drivers/scsi/qla4xxx/ql4_os.c @@ -163,10 +163,10 @@ static void qla4xxx_recovery_timedout(struct iscsi_cls_session *session) if (atomic_read(&ddb_entry->state) != DDB_STATE_ONLINE) { atomic_set(&ddb_entry->state, DDB_STATE_DEAD); - DEBUG2(printk("scsi%ld: %s: ddb [%d] port down retry count " + DEBUG2(printk("scsi%ld: %s: ddb [%d] session recovery timeout " "of (%d) secs exhausted, marking device DEAD.\n", ha->host_no, __func__, ddb_entry->fw_ddb_index, - ha->port_down_retry_count)); + QL4_SESS_RECOVERY_TMO)); qla4xxx_wake_dpc(ha); } @@ -298,7 +298,8 @@ int qla4xxx_add_sess(struct ddb_entry *ddb_entry) { int err; - ddb_entry->sess->recovery_tmo = ddb_entry->ha->port_down_retry_count; + ddb_entry->sess->recovery_tmo = QL4_SESS_RECOVERY_TMO; + err = iscsi_add_session(ddb_entry->sess, ddb_entry->fw_ddb_index); if (err) { DEBUG2(printk(KERN_ERR "Could not add session.\n")); @@ -474,6 +475,14 @@ static int qla4xxx_queuecommand(struct scsi_cmnd *cmd, struct srb *srb; int rval; + if (test_bit(AF_EEH_BUSY, &ha->flags)) { + if (test_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags)) + cmd->result = DID_NO_CONNECT << 16; + else + cmd->result = DID_REQUEUE << 16; + goto qc_fail_command; + } + if (!sess) { cmd->result = DID_IMM_RETRY << 16; goto qc_fail_command; @@ -654,6 +663,13 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha) uint32_t fw_heartbeat_counter, halt_status; fw_heartbeat_counter = qla4_8xxx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER); + /* If PEG_ALIVE_COUNTER is 0xffffffff, AER/EEH is in progress, ignore */ + if (fw_heartbeat_counter == 0xffffffff) { + DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen " + "state, QLA82XX_PEG_ALIVE_COUNTER is 0xffffffff\n", + ha->host_no, __func__)); + return; + } if (ha->fw_heartbeat_counter == fw_heartbeat_counter) { ha->seconds_since_last_heartbeat++; @@ -662,6 +678,7 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha) ha->seconds_since_last_heartbeat = 0; halt_status = qla4_8xxx_rd_32(ha, QLA82XX_PEG_HALT_STATUS1); + /* Since we cannot change dev_state in interrupt * context, set appropriate DPC flag then wakeup * DPC */ @@ -673,6 +690,7 @@ static void qla4_8xxx_check_fw_alive(struct scsi_qla_host *ha) set_bit(DPC_RESET_HA, &ha->dpc_flags); } qla4xxx_wake_dpc(ha); + qla4xxx_mailbox_premature_completion(ha); } } ha->fw_heartbeat_counter = fw_heartbeat_counter; @@ -698,6 +716,7 @@ void qla4_8xxx_watchdog(struct scsi_qla_host *ha) ha->host_no, __func__); set_bit(DPC_RESET_HA, &ha->dpc_flags); qla4xxx_wake_dpc(ha); + qla4xxx_mailbox_premature_completion(ha); } else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT && !test_bit(DPC_HA_NEED_QUIESCENT, &ha->dpc_flags)) { printk("scsi%ld: %s: HW State: NEED QUIES!\n", @@ -719,6 +738,19 @@ static void qla4xxx_timer(struct scsi_qla_host *ha) { struct ddb_entry *ddb_entry, *dtemp; int start_dpc = 0; + uint16_t w; + + /* If we are in the middle of AER/EEH processing + * skip any processing and reschedule the timer + */ + if (test_bit(AF_EEH_BUSY, &ha->flags)) { + mod_timer(&ha->timer, jiffies + HZ); + return; + } + + /* Hardware read to trigger an EEH error during mailbox waits. */ + if (!pci_channel_offline(ha->pdev)) + pci_read_config_word(ha->pdev, PCI_VENDOR_ID, &w); if (test_bit(AF_HBA_GOING_AWAY, &ha->flags)) { DEBUG2(ql4_printk(KERN_INFO, ha, "%s exited. HBA GOING AWAY\n", @@ -1207,7 +1239,13 @@ static void qla4xxx_do_dpc(struct work_struct *work) /* Initialization not yet finished. Don't do anything yet. */ if (!test_bit(AF_INIT_DONE, &ha->flags)) - return; + goto do_dpc_exit; + + if (test_bit(AF_EEH_BUSY, &ha->flags)) { + DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n", + ha->host_no, __func__, ha->flags)); + goto do_dpc_exit; + } /* HBA is in the process of being permanently disabled. * Don't process anything */ @@ -1346,6 +1384,8 @@ dpc_post_reset_ha: } } } + +do_dpc_exit: clear_bit(AF_DPC_SCHEDULED, &ha->flags); } @@ -1612,6 +1652,8 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, ha->host = host; ha->host_no = host->host_no; + pci_enable_pcie_error_reporting(pdev); + /* Setup Runtime configurable options */ if (is_qla8022(ha)) { ha->isp_ops = &qla4_8xxx_isp_ops; @@ -1630,6 +1672,10 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, ha->isp_ops = &qla4xxx_isp_ops; } + /* Set EEH reset type to fundamental if required by hba */ + if (is_qla8022(ha)) + pdev->needs_freset = 1; + /* Configure PCI I/O space. */ ret = ha->isp_ops->iospace_config(ha); if (ret) @@ -1726,6 +1772,7 @@ static int __devinit qla4xxx_probe_adapter(struct pci_dev *pdev, } } + pci_save_state(ha->pdev); ha->isp_ops->enable_intrs(ha); /* Start timer thread. */ @@ -1752,6 +1799,7 @@ probe_failed: qla4xxx_free_adapter(ha); probe_failed_ioconfig: + pci_disable_pcie_error_reporting(pdev); scsi_host_put(ha->host); probe_disable_device: @@ -1781,6 +1829,7 @@ static void __devexit qla4xxx_remove_adapter(struct pci_dev *pdev) scsi_host_put(ha->host); + pci_disable_pcie_error_reporting(pdev); pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); } @@ -1877,6 +1926,17 @@ static int qla4xxx_eh_wait_on_command(struct scsi_qla_host *ha, int done = 0; struct srb *rp; uint32_t max_wait_time = EH_WAIT_CMD_TOV; + int ret = SUCCESS; + + /* Dont wait on command if PCI error is being handled + * by PCI AER driver + */ + if (unlikely(pci_channel_offline(ha->pdev)) || + (test_bit(AF_EEH_BUSY, &ha->flags))) { + ql4_printk(KERN_WARNING, ha, "scsi%ld: Return from %s\n", + ha->host_no, __func__); + return ret; + } do { /* Checking to see if its returned to OS */ @@ -2172,6 +2232,252 @@ static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd) return return_status; } +/* PCI AER driver recovers from all correctable errors w/o + * driver intervention. For uncorrectable errors PCI AER + * driver calls the following device driver's callbacks + * + * - Fatal Errors - link_reset + * - Non-Fatal Errors - driver's pci_error_detected() which + * returns CAN_RECOVER, NEED_RESET or DISCONNECT. + * + * PCI AER driver calls + * CAN_RECOVER - driver's pci_mmio_enabled(), mmio_enabled + * returns RECOVERED or NEED_RESET if fw_hung + * NEED_RESET - driver's slot_reset() + * DISCONNECT - device is dead & cannot recover + * RECOVERED - driver's pci_resume() + */ +static pci_ers_result_t +qla4xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state) +{ + struct scsi_qla_host *ha = pci_get_drvdata(pdev); + + ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: error detected:state %x\n", + ha->host_no, __func__, state); + + if (!is_aer_supported(ha)) + return PCI_ERS_RESULT_NONE; + + switch (state) { + case pci_channel_io_normal: + clear_bit(AF_EEH_BUSY, &ha->flags); + return PCI_ERS_RESULT_CAN_RECOVER; + case pci_channel_io_frozen: + set_bit(AF_EEH_BUSY, &ha->flags); + qla4xxx_mailbox_premature_completion(ha); + qla4xxx_free_irqs(ha); + pci_disable_device(pdev); + return PCI_ERS_RESULT_NEED_RESET; + case pci_channel_io_perm_failure: + set_bit(AF_EEH_BUSY, &ha->flags); + set_bit(AF_PCI_CHANNEL_IO_PERM_FAILURE, &ha->flags); + qla4xxx_abort_active_cmds(ha, DID_NO_CONNECT << 16); + return PCI_ERS_RESULT_DISCONNECT; + } + return PCI_ERS_RESULT_NEED_RESET; +} + +/** + * qla4xxx_pci_mmio_enabled() gets called if + * qla4xxx_pci_error_detected() returns PCI_ERS_RESULT_CAN_RECOVER + * and read/write to the device still works. + **/ +static pci_ers_result_t +qla4xxx_pci_mmio_enabled(struct pci_dev *pdev) +{ + struct scsi_qla_host *ha = pci_get_drvdata(pdev); + + if (!is_aer_supported(ha)) + return PCI_ERS_RESULT_NONE; + + if (test_bit(AF_FW_RECOVERY, &ha->flags)) { + ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: firmware hang -- " + "mmio_enabled\n", ha->host_no, __func__); + return PCI_ERS_RESULT_NEED_RESET; + } else + return PCI_ERS_RESULT_RECOVERED; +} + +uint32_t qla4_8xxx_error_recovery(struct scsi_qla_host *ha) +{ + uint32_t rval = QLA_ERROR; + int fn; + struct pci_dev *other_pdev = NULL; + + ql4_printk(KERN_WARNING, ha, "scsi%ld: In %s\n", ha->host_no, __func__); + + set_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); + + if (test_bit(AF_ONLINE, &ha->flags)) { + clear_bit(AF_ONLINE, &ha->flags); + qla4xxx_mark_all_devices_missing(ha); + qla4xxx_process_aen(ha, FLUSH_DDB_CHANGED_AENS); + qla4xxx_abort_active_cmds(ha, DID_RESET << 16); + } + + fn = PCI_FUNC(ha->pdev->devfn); + while (fn > 0) { + fn--; + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Finding PCI device at " + "func %x\n", ha->host_no, __func__, fn); + /* Get the pci device given the domain, bus, + * slot/function number */ + other_pdev = + pci_get_domain_bus_and_slot(pci_domain_nr(ha->pdev->bus), + ha->pdev->bus->number, PCI_DEVFN(PCI_SLOT(ha->pdev->devfn), + fn)); + + if (!other_pdev) + continue; + + if (atomic_read(&other_pdev->enable_cnt)) { + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: Found PCI " + "func in enabled state%x\n", ha->host_no, + __func__, fn); + pci_dev_put(other_pdev); + break; + } + pci_dev_put(other_pdev); + } + + /* The first function on the card, the reset owner will + * start & initialize the firmware. The other functions + * on the card will reset the firmware context + */ + if (!fn) { + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn being reset " + "0x%x is the owner\n", ha->host_no, __func__, + ha->pdev->devfn); + + qla4_8xxx_idc_lock(ha); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_COLD); + + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_IDC_VERSION, + QLA82XX_IDC_VERSION); + + qla4_8xxx_idc_unlock(ha); + clear_bit(AF_FW_RECOVERY, &ha->flags); + rval = qla4xxx_initialize_adapter(ha, PRESERVE_DDB_LIST); + qla4_8xxx_idc_lock(ha); + + if (rval != QLA_SUCCESS) { + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: " + "FAILED\n", ha->host_no, __func__); + qla4_8xxx_clear_drv_active(ha); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_FAILED); + } else { + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: HW State: " + "READY\n", ha->host_no, __func__); + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DEV_STATE, + QLA82XX_DEV_READY); + /* Clear driver state register */ + qla4_8xxx_wr_32(ha, QLA82XX_CRB_DRV_STATE, 0); + qla4_8xxx_set_drv_active(ha); + ha->isp_ops->enable_intrs(ha); + } + qla4_8xxx_idc_unlock(ha); + } else { + ql4_printk(KERN_INFO, ha, "scsi%ld: %s: devfn 0x%x is not " + "the reset owner\n", ha->host_no, __func__, + ha->pdev->devfn); + if ((qla4_8xxx_rd_32(ha, QLA82XX_CRB_DEV_STATE) == + QLA82XX_DEV_READY)) { + clear_bit(AF_FW_RECOVERY, &ha->flags); + rval = qla4xxx_initialize_adapter(ha, + PRESERVE_DDB_LIST); + if (rval == QLA_SUCCESS) + ha->isp_ops->enable_intrs(ha); + qla4_8xxx_idc_lock(ha); + qla4_8xxx_set_drv_active(ha); + qla4_8xxx_idc_unlock(ha); + } + } + clear_bit(DPC_RESET_ACTIVE, &ha->dpc_flags); + return rval; +} + +static pci_ers_result_t +qla4xxx_pci_slot_reset(struct pci_dev *pdev) +{ + pci_ers_result_t ret = PCI_ERS_RESULT_DISCONNECT; + struct scsi_qla_host *ha = pci_get_drvdata(pdev); + int rc; + + ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: slot_reset\n", + ha->host_no, __func__); + + if (!is_aer_supported(ha)) + return PCI_ERS_RESULT_NONE; + + /* Restore the saved state of PCIe device - + * BAR registers, PCI Config space, PCIX, MSI, + * IOV states + */ + pci_restore_state(pdev); + + /* pci_restore_state() clears the saved_state flag of the device + * save restored state which resets saved_state flag + */ + pci_save_state(pdev); + + /* Initialize device or resume if in suspended state */ + rc = pci_enable_device(pdev); + if (rc) { + ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Cant re-enable " + "device after reset\n", ha->host_no, __func__); + goto exit_slot_reset; + } + + ret = qla4xxx_request_irqs(ha); + if (ret) { + ql4_printk(KERN_WARNING, ha, "Failed to reserve interrupt %d" + " already in use.\n", pdev->irq); + goto exit_slot_reset; + } + + if (is_qla8022(ha)) { + if (qla4_8xxx_error_recovery(ha) == QLA_SUCCESS) { + ret = PCI_ERS_RESULT_RECOVERED; + goto exit_slot_reset; + } else + goto exit_slot_reset; + } + +exit_slot_reset: + ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: Return=%x\n" + "device after reset\n", ha->host_no, __func__, ret); + return ret; +} + +static void +qla4xxx_pci_resume(struct pci_dev *pdev) +{ + struct scsi_qla_host *ha = pci_get_drvdata(pdev); + int ret; + + ql4_printk(KERN_WARNING, ha, "scsi%ld: %s: pci_resume\n", + ha->host_no, __func__); + + ret = qla4xxx_wait_for_hba_online(ha); + if (ret != QLA_SUCCESS) { + ql4_printk(KERN_ERR, ha, "scsi%ld: %s: the device failed to " + "resume I/O from slot/link_reset\n", ha->host_no, + __func__); + } + + pci_cleanup_aer_uncorrect_error_status(pdev); + clear_bit(AF_EEH_BUSY, &ha->flags); +} + +static struct pci_error_handlers qla4xxx_err_handler = { + .error_detected = qla4xxx_pci_error_detected, + .mmio_enabled = qla4xxx_pci_mmio_enabled, + .slot_reset = qla4xxx_pci_slot_reset, + .resume = qla4xxx_pci_resume, +}; + static struct pci_device_id qla4xxx_pci_tbl[] = { { .vendor = PCI_VENDOR_ID_QLOGIC, @@ -2206,6 +2512,7 @@ static struct pci_driver qla4xxx_pci_driver = { .id_table = qla4xxx_pci_tbl, .probe = qla4xxx_probe_adapter, .remove = qla4xxx_remove_adapter, + .err_handler = &qla4xxx_err_handler, }; static int __init qla4xxx_module_init(void) diff --git a/drivers/scsi/qla4xxx/ql4_version.h b/drivers/scsi/qla4xxx/ql4_version.h index c905dbd75331..a77b973f2cbc 100644 --- a/drivers/scsi/qla4xxx/ql4_version.h +++ b/drivers/scsi/qla4xxx/ql4_version.h @@ -5,4 +5,4 @@ * See LICENSE.qla4xxx for copyright and licensing details. */ -#define QLA4XXX_DRIVER_VERSION "5.02.00-k2" +#define QLA4XXX_DRIVER_VERSION "5.02.00-k3" |