diff options
Diffstat (limited to 'drivers/scsi/sata_mv.c')
| -rw-r--r-- | drivers/scsi/sata_mv.c | 1138 |
1 files changed, 943 insertions, 195 deletions
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c index ea76fe44585e..46dbdee79f77 100644 --- a/drivers/scsi/sata_mv.c +++ b/drivers/scsi/sata_mv.c @@ -29,13 +29,14 @@ #include <linux/interrupt.h> #include <linux/sched.h> #include <linux/dma-mapping.h> +#include <linux/device.h> #include "scsi.h" #include <scsi/scsi_host.h> #include <linux/libata.h> #include <asm/io.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.12" +#define DRV_VERSION "0.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -55,31 +56,61 @@ enum { MV_SATAHC_ARBTR_REG_SZ = MV_MINOR_REG_AREA_SZ, /* arbiter */ MV_PORT_REG_SZ = MV_MINOR_REG_AREA_SZ, - MV_Q_CT = 32, - MV_CRQB_SZ = 32, - MV_CRPB_SZ = 8, + MV_USE_Q_DEPTH = ATA_DEF_QUEUE, - MV_DMA_BOUNDARY = 0xffffffffU, - SATAHC_MASK = (~(MV_SATAHC_REG_SZ - 1)), + MV_MAX_Q_DEPTH = 32, + MV_MAX_Q_DEPTH_MASK = MV_MAX_Q_DEPTH - 1, + + /* CRQB needs alignment on a 1KB boundary. Size == 1KB + * CRPB needs alignment on a 256B boundary. Size == 256B + * SG count of 176 leads to MV_PORT_PRIV_DMA_SZ == 4KB + * ePRD (SG) entries need alignment on a 16B boundary. Size == 16B + */ + MV_CRQB_Q_SZ = (32 * MV_MAX_Q_DEPTH), + MV_CRPB_Q_SZ = (8 * MV_MAX_Q_DEPTH), + MV_MAX_SG_CT = 176, + MV_SG_TBL_SZ = (16 * MV_MAX_SG_CT), + MV_PORT_PRIV_DMA_SZ = (MV_CRQB_Q_SZ + MV_CRPB_Q_SZ + MV_SG_TBL_SZ), + + /* Our DMA boundary is determined by an ePRD being unable to handle + * anything larger than 64KB + */ + MV_DMA_BOUNDARY = 0xffffU, MV_PORTS_PER_HC = 4, /* == (port / MV_PORTS_PER_HC) to determine HC from 0-7 port */ MV_PORT_HC_SHIFT = 2, - /* == (port % MV_PORTS_PER_HC) to determine port from 0-7 port */ + /* == (port % MV_PORTS_PER_HC) to determine hard port from 0-7 port */ MV_PORT_MASK = 3, /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - MV_FLAG_BDMA = (1 << 28), /* Basic DMA */ + MV_FLAG_GLBL_SFT_RST = (1 << 28), /* Global Soft Reset support */ + MV_COMMON_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | + ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), + MV_6XXX_FLAGS = (MV_FLAG_IRQ_COALESCE | + MV_FLAG_GLBL_SFT_RST), chip_504x = 0, chip_508x = 1, chip_604x = 2, chip_608x = 3, + CRQB_FLAG_READ = (1 << 0), + CRQB_TAG_SHIFT = 1, + CRQB_CMD_ADDR_SHIFT = 8, + CRQB_CMD_CS = (0x2 << 11), + CRQB_CMD_LAST = (1 << 15), + + CRPB_FLAG_STATUS_SHIFT = 8, + + EPRD_FLAG_END_OF_TBL = (1 << 31), + /* PCI interface registers */ + PCI_COMMAND_OFS = 0xc00, + PCI_MAIN_CMD_STS_OFS = 0xd30, STOP_PCI_MASTER = (1 << 2), PCI_MASTER_EMPTY = (1 << 3), @@ -111,20 +142,13 @@ enum { HC_CFG_OFS = 0, HC_IRQ_CAUSE_OFS = 0x14, - CRBP_DMA_DONE = (1 << 0), /* shift by port # */ + CRPB_DMA_DONE = (1 << 0), /* shift by port # */ HC_IRQ_COAL = (1 << 4), /* IRQ coalescing */ DEV_IRQ = (1 << 8), /* shift by port # */ /* Shadow block registers */ - SHD_PIO_DATA_OFS = 0x100, - SHD_FEA_ERR_OFS = 0x104, - SHD_SECT_CNT_OFS = 0x108, - SHD_LBA_L_OFS = 0x10C, - SHD_LBA_M_OFS = 0x110, - SHD_LBA_H_OFS = 0x114, - SHD_DEV_HD_OFS = 0x118, - SHD_CMD_STA_OFS = 0x11C, - SHD_CTL_AST_OFS = 0x120, + SHD_BLK_OFS = 0x100, + SHD_CTL_AST_OFS = 0x20, /* ofs from SHD_BLK_OFS */ /* SATA registers */ SATA_STATUS_OFS = 0x300, /* ctrl, err regs follow status */ @@ -132,6 +156,11 @@ enum { /* Port registers */ EDMA_CFG_OFS = 0, + EDMA_CFG_Q_DEPTH = 0, /* queueing disabled */ + EDMA_CFG_NCQ = (1 << 5), + EDMA_CFG_NCQ_GO_ON_ERR = (1 << 14), /* continue on error */ + EDMA_CFG_RD_BRST_EXT = (1 << 11), /* read burst 512B */ + EDMA_CFG_WR_BUFF_LEN = (1 << 13), /* write buffer 512B */ EDMA_ERR_IRQ_CAUSE_OFS = 0x8, EDMA_ERR_IRQ_MASK_OFS = 0xc, @@ -161,33 +190,84 @@ enum { EDMA_ERR_LNK_DATA_TX | EDMA_ERR_TRANS_PROTO), + EDMA_REQ_Q_BASE_HI_OFS = 0x10, + EDMA_REQ_Q_IN_PTR_OFS = 0x14, /* also contains BASE_LO */ + EDMA_REQ_Q_BASE_LO_MASK = 0xfffffc00U, + + EDMA_REQ_Q_OUT_PTR_OFS = 0x18, + EDMA_REQ_Q_PTR_SHIFT = 5, + + EDMA_RSP_Q_BASE_HI_OFS = 0x1c, + EDMA_RSP_Q_IN_PTR_OFS = 0x20, + EDMA_RSP_Q_OUT_PTR_OFS = 0x24, /* also contains BASE_LO */ + EDMA_RSP_Q_BASE_LO_MASK = 0xffffff00U, + EDMA_RSP_Q_PTR_SHIFT = 3, + EDMA_CMD_OFS = 0x28, EDMA_EN = (1 << 0), EDMA_DS = (1 << 1), ATA_RST = (1 << 2), - /* BDMA is 6xxx part only */ - BDMA_CMD_OFS = 0x224, - BDMA_START = (1 << 0), + /* Host private flags (hp_flags) */ + MV_HP_FLAG_MSI = (1 << 0), - MV_UNDEF = 0, + /* Port private flags (pp_flags) */ + MV_PP_FLAG_EDMA_EN = (1 << 0), + MV_PP_FLAG_EDMA_DS_ACT = (1 << 1), }; -struct mv_port_priv { +/* Command ReQuest Block: 32B */ +struct mv_crqb { + u32 sg_addr; + u32 sg_addr_hi; + u16 ctrl_flags; + u16 ata_cmd[11]; +}; +/* Command ResPonse Block: 8B */ +struct mv_crpb { + u16 id; + u16 flags; + u32 tmstmp; }; -struct mv_host_priv { +/* EDMA Physical Region Descriptor (ePRD); A.K.A. SG */ +struct mv_sg { + u32 addr; + u32 flags_size; + u32 addr_hi; + u32 reserved; +}; +struct mv_port_priv { + struct mv_crqb *crqb; + dma_addr_t crqb_dma; + struct mv_crpb *crpb; + dma_addr_t crpb_dma; + struct mv_sg *sg_tbl; + dma_addr_t sg_tbl_dma; + + unsigned req_producer; /* cp of req_in_ptr */ + unsigned rsp_consumer; /* cp of rsp_out_ptr */ + u32 pp_flags; +}; + +struct mv_host_priv { + u32 hp_flags; }; static void mv_irq_clear(struct ata_port *ap); static u32 mv_scr_read(struct ata_port *ap, unsigned int sc_reg_in); static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val); static void mv_phy_reset(struct ata_port *ap); -static int mv_master_reset(void __iomem *mmio_base); +static void mv_host_stop(struct ata_host_set *host_set); +static int mv_port_start(struct ata_port *ap); +static void mv_port_stop(struct ata_port *ap); +static void mv_qc_prep(struct ata_queued_cmd *qc); +static int mv_qc_issue(struct ata_queued_cmd *qc); static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs); +static void mv_eng_timeout(struct ata_port *ap); static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static Scsi_Host_Template mv_sht = { @@ -196,13 +276,13 @@ static Scsi_Host_Template mv_sht = { .ioctl = ata_scsi_ioctl, .queuecommand = ata_scsi_queuecmd, .eh_strategy_handler = ata_scsi_error, - .can_queue = ATA_DEF_QUEUE, + .can_queue = MV_USE_Q_DEPTH, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_UNDEF, + .sg_tablesize = MV_MAX_SG_CT, .max_sectors = ATA_MAX_SECTORS, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, - .use_clustering = MV_UNDEF, + .use_clustering = ATA_SHT_USE_CLUSTERING, .proc_name = DRV_NAME, .dma_boundary = MV_DMA_BOUNDARY, .slave_configure = ata_scsi_slave_config, @@ -210,7 +290,7 @@ static Scsi_Host_Template mv_sht = { .ordered_flush = 1, }; -static struct ata_port_operations mv_ops = { +static const struct ata_port_operations mv_ops = { .port_disable = ata_port_disable, .tf_load = ata_tf_load, @@ -221,10 +301,10 @@ static struct ata_port_operations mv_ops = { .phy_reset = mv_phy_reset, - .qc_prep = ata_qc_prep, - .qc_issue = ata_qc_issue_prot, + .qc_prep = mv_qc_prep, + .qc_issue = mv_qc_issue, - .eng_timeout = ata_eng_timeout, + .eng_timeout = mv_eng_timeout, .irq_handler = mv_interrupt, .irq_clear = mv_irq_clear, @@ -232,46 +312,39 @@ static struct ata_port_operations mv_ops = { .scr_read = mv_scr_read, .scr_write = mv_scr_write, - .port_start = ata_port_start, - .port_stop = ata_port_stop, - .host_stop = ata_host_stop, + .port_start = mv_port_start, + .port_stop = mv_port_stop, + .host_stop = mv_host_stop, }; static struct ata_port_info mv_port_info[] = { { /* chip_504x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = MV_COMMON_FLAGS, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_508x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_DUAL_HC), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0, /* 0x7f (udma0-6 disabled for now) */ .port_ops = &mv_ops, }, { /* chip_604x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, { /* chip_608x */ .sht = &mv_sht, - .host_flags = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | - ATA_FLAG_SATA_RESET | ATA_FLAG_MMIO | - MV_FLAG_IRQ_COALESCE | MV_FLAG_DUAL_HC | - MV_FLAG_BDMA), - .pio_mask = 0x1f, /* pio4-0 */ - .udma_mask = 0, /* 0x7f (udma6-0 disabled for now) */ + .host_flags = (MV_COMMON_FLAGS | MV_6XXX_FLAGS | + MV_FLAG_DUAL_HC), + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = 0x7f, /* udma0-6 */ .port_ops = &mv_ops, }, }; @@ -306,12 +379,6 @@ static inline void writelfl(unsigned long data, void __iomem *addr) (void) readl(addr); /* flush to avoid PCI posted write */ } -static inline void __iomem *mv_port_addr_to_hc_base(void __iomem *port_mmio) -{ - return ((void __iomem *)((unsigned long)port_mmio & - (unsigned long)SATAHC_MASK)); -} - static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc) { return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ)); @@ -329,24 +396,150 @@ static inline void __iomem *mv_ap_base(struct ata_port *ap) return mv_port_base(ap->host_set->mmio_base, ap->port_no); } -static inline int mv_get_hc_count(unsigned long flags) +static inline int mv_get_hc_count(unsigned long hp_flags) { - return ((flags & MV_FLAG_DUAL_HC) ? 2 : 1); + return ((hp_flags & MV_FLAG_DUAL_HC) ? 2 : 1); } -static inline int mv_is_edma_active(struct ata_port *ap) +static void mv_irq_clear(struct ata_port *ap) +{ +} + +/** + * mv_start_dma - Enable eDMA engine + * @base: port base address + * @pp: port private data + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_start_dma(void __iomem *base, struct mv_port_priv *pp) +{ + if (!(MV_PP_FLAG_EDMA_EN & pp->pp_flags)) { + writelfl(EDMA_EN, base + EDMA_CMD_OFS); + pp->pp_flags |= MV_PP_FLAG_EDMA_EN; + } + assert(EDMA_EN & readl(base + EDMA_CMD_OFS)); +} + +/** + * mv_stop_dma - Disable eDMA engine + * @ap: ATA channel to manipulate + * + * Verify the local cache of the eDMA state is accurate with an + * assert. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_stop_dma(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); - return (EDMA_EN & readl(port_mmio + EDMA_CMD_OFS)); + struct mv_port_priv *pp = ap->private_data; + u32 reg; + int i; + + if (MV_PP_FLAG_EDMA_EN & pp->pp_flags) { + /* Disable EDMA if active. The disable bit auto clears. + */ + writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS); + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } else { + assert(!(EDMA_EN & readl(port_mmio + EDMA_CMD_OFS))); + } + + /* now properly wait for the eDMA to stop */ + for (i = 1000; i > 0; i--) { + reg = readl(port_mmio + EDMA_CMD_OFS); + if (!(EDMA_EN & reg)) { + break; + } + udelay(100); + } + + if (EDMA_EN & reg) { + printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id); + /* FIXME: Consider doing a reset here to recover */ + } } -static inline int mv_port_bdma_capable(struct ata_port *ap) +#ifdef ATA_DEBUG +static void mv_dump_mem(void __iomem *start, unsigned bytes) { - return (ap->flags & MV_FLAG_BDMA); + int b, w; + for (b = 0; b < bytes; ) { + DPRINTK("%p: ", start + b); + for (w = 0; b < bytes && w < 4; w++) { + printk("%08x ",readl(start + b)); + b += sizeof(u32); + } + printk("\n"); + } } +#endif -static void mv_irq_clear(struct ata_port *ap) +static void mv_dump_pci_cfg(struct pci_dev *pdev, unsigned bytes) +{ +#ifdef ATA_DEBUG + int b, w; + u32 dw; + for (b = 0; b < bytes; ) { + DPRINTK("%02x: ", b); + for (w = 0; b < bytes && w < 4; w++) { + (void) pci_read_config_dword(pdev,b,&dw); + printk("%08x ",dw); + b += sizeof(u32); + } + printk("\n"); + } +#endif +} +static void mv_dump_all_regs(void __iomem *mmio_base, int port, + struct pci_dev *pdev) { +#ifdef ATA_DEBUG + void __iomem *hc_base = mv_hc_base(mmio_base, + port >> MV_PORT_HC_SHIFT); + void __iomem *port_base; + int start_port, num_ports, p, start_hc, num_hcs, hc; + + if (0 > port) { + start_hc = start_port = 0; + num_ports = 8; /* shld be benign for 4 port devs */ + num_hcs = 2; + } else { + start_hc = port >> MV_PORT_HC_SHIFT; + start_port = port; + num_ports = num_hcs = 1; + } + DPRINTK("All registers for port(s) %u-%u:\n", start_port, + num_ports > 1 ? num_ports - 1 : start_port); + + if (NULL != pdev) { + DPRINTK("PCI config space regs:\n"); + mv_dump_pci_cfg(pdev, 0x68); + } + DPRINTK("PCI regs:\n"); + mv_dump_mem(mmio_base+0xc00, 0x3c); + mv_dump_mem(mmio_base+0xd00, 0x34); + mv_dump_mem(mmio_base+0xf00, 0x4); + mv_dump_mem(mmio_base+0x1d00, 0x6c); + for (hc = start_hc; hc < start_hc + num_hcs; hc++) { + hc_base = mv_hc_base(mmio_base, port >> MV_PORT_HC_SHIFT); + DPRINTK("HC regs (HC %i):\n", hc); + mv_dump_mem(hc_base, 0x1c); + } + for (p = start_port; p < start_port + num_ports; p++) { + port_base = mv_port_base(mmio_base, p); + DPRINTK("EDMA regs (port %i):\n",p); + mv_dump_mem(port_base, 0x54); + DPRINTK("SATA regs (port %i):\n",p); + mv_dump_mem(port_base+0x300, 0x60); + } +#endif } static unsigned int mv_scr_offset(unsigned int sc_reg_in) @@ -389,30 +582,37 @@ static void mv_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) } } -static int mv_master_reset(void __iomem *mmio_base) +/** + * mv_global_soft_reset - Perform the 6xxx global soft reset + * @mmio_base: base address of the HBA + * + * This routine only applies to 6xxx parts. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_global_soft_reset(void __iomem *mmio_base) { void __iomem *reg = mmio_base + PCI_MAIN_CMD_STS_OFS; int i, rc = 0; u32 t; - VPRINTK("ENTER\n"); - /* Following procedure defined in PCI "main command and status * register" table. */ t = readl(reg); writel(t | STOP_PCI_MASTER, reg); - for (i = 0; i < 100; i++) { - msleep(10); + for (i = 0; i < 1000; i++) { + udelay(1); t = readl(reg); if (PCI_MASTER_EMPTY & t) { break; } } if (!(PCI_MASTER_EMPTY & t)) { - printk(KERN_ERR DRV_NAME "PCI master won't flush\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": PCI master won't flush\n"); + rc = 1; goto done; } @@ -425,39 +625,399 @@ static int mv_master_reset(void __iomem *mmio_base) } while (!(GLOB_SFT_RST & t) && (i-- > 0)); if (!(GLOB_SFT_RST & t)) { - printk(KERN_ERR DRV_NAME "can't set global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't set global reset\n"); + rc = 1; goto done; } - /* clear reset */ + /* clear reset and *reenable the PCI master* (not mentioned in spec) */ i = 5; do { - writel(t & ~GLOB_SFT_RST, reg); + writel(t & ~(GLOB_SFT_RST | STOP_PCI_MASTER), reg); t = readl(reg); udelay(1); } while ((GLOB_SFT_RST & t) && (i-- > 0)); if (GLOB_SFT_RST & t) { - printk(KERN_ERR DRV_NAME "can't clear global reset\n"); - rc = 1; /* broken HW? */ + printk(KERN_ERR DRV_NAME ": can't clear global reset\n"); + rc = 1; } - - done: - VPRINTK("EXIT, rc = %i\n", rc); +done: return rc; } -static void mv_err_intr(struct ata_port *ap) +/** + * mv_host_stop - Host specific cleanup/stop routine. + * @host_set: host data structure + * + * Disable ints, cleanup host memory, call general purpose + * host_stop. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_host_stop(struct ata_host_set *host_set) { - void __iomem *port_mmio; - u32 edma_err_cause, serr = 0; + struct mv_host_priv *hpriv = host_set->private_data; + struct pci_dev *pdev = to_pci_dev(host_set->dev); + + if (hpriv->hp_flags & MV_HP_FLAG_MSI) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } + kfree(hpriv); + ata_host_stop(host_set); +} + +/** + * mv_port_start - Port specific init/start routine. + * @ap: ATA channel to manipulate + * + * Allocate and point to DMA memory, init port private memory, + * zero indices. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_port_start(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp; + void __iomem *port_mmio = mv_ap_base(ap); + void *mem; + dma_addr_t mem_dma; + + pp = kmalloc(sizeof(*pp), GFP_KERNEL); + if (!pp) { + return -ENOMEM; + } + memset(pp, 0, sizeof(*pp)); + + mem = dma_alloc_coherent(dev, MV_PORT_PRIV_DMA_SZ, &mem_dma, + GFP_KERNEL); + if (!mem) { + kfree(pp); + return -ENOMEM; + } + memset(mem, 0, MV_PORT_PRIV_DMA_SZ); + + /* First item in chunk of DMA memory: + * 32-slot command request table (CRQB), 32 bytes each in size + */ + pp->crqb = mem; + pp->crqb_dma = mem_dma; + mem += MV_CRQB_Q_SZ; + mem_dma += MV_CRQB_Q_SZ; + + /* Second item: + * 32-slot command response table (CRPB), 8 bytes each in size + */ + pp->crpb = mem; + pp->crpb_dma = mem_dma; + mem += MV_CRPB_Q_SZ; + mem_dma += MV_CRPB_Q_SZ; + + /* Third item: + * Table of scatter-gather descriptors (ePRD), 16 bytes each + */ + pp->sg_tbl = mem; + pp->sg_tbl_dma = mem_dma; + + writelfl(EDMA_CFG_Q_DEPTH | EDMA_CFG_RD_BRST_EXT | + EDMA_CFG_WR_BUFF_LEN, port_mmio + EDMA_CFG_OFS); - /* bug here b/c we got an err int on a port we don't know about, - * so there's no way to clear it + writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); + writelfl(pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK, + port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + writelfl(0, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(0, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); + + writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); + writelfl(pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK, + port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + pp->req_producer = pp->rsp_consumer = 0; + + /* Don't turn on EDMA here...do it before DMA commands only. Else + * we'll be unable to send non-data, PIO, etc due to restricted access + * to shadow regs. */ - BUG_ON(NULL == ap); - port_mmio = mv_ap_base(ap); + ap->private_data = pp; + return 0; +} + +/** + * mv_port_stop - Port specific cleanup/stop routine. + * @ap: ATA channel to manipulate + * + * Stop DMA, cleanup port memory. + * + * LOCKING: + * This routine uses the host_set lock to protect the DMA stop. + */ +static void mv_port_stop(struct ata_port *ap) +{ + struct device *dev = ap->host_set->dev; + struct mv_port_priv *pp = ap->private_data; + unsigned long flags; + + spin_lock_irqsave(&ap->host_set->lock, flags); + mv_stop_dma(ap); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + + ap->private_data = NULL; + dma_free_coherent(dev, MV_PORT_PRIV_DMA_SZ, pp->crpb, pp->crpb_dma); + kfree(pp); +} + +/** + * mv_fill_sg - Fill out the Marvell ePRD (scatter gather) entries + * @qc: queued command whose SG list to source from + * + * Populate the SG list and mark the last entry. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_fill_sg(struct ata_queued_cmd *qc) +{ + struct mv_port_priv *pp = qc->ap->private_data; + unsigned int i; + + for (i = 0; i < qc->n_elem; i++) { + u32 sg_len; + dma_addr_t addr; + + addr = sg_dma_address(&qc->sg[i]); + sg_len = sg_dma_len(&qc->sg[i]); + + pp->sg_tbl[i].addr = cpu_to_le32(addr & 0xffffffff); + pp->sg_tbl[i].addr_hi = cpu_to_le32((addr >> 16) >> 16); + assert(0 == (sg_len & ~MV_DMA_BOUNDARY)); + pp->sg_tbl[i].flags_size = cpu_to_le32(sg_len); + } + if (0 < qc->n_elem) { + pp->sg_tbl[qc->n_elem - 1].flags_size |= + cpu_to_le32(EPRD_FLAG_END_OF_TBL); + } +} + +static inline unsigned mv_inc_q_index(unsigned *index) +{ + *index = (*index + 1) & MV_MAX_Q_DEPTH_MASK; + return *index; +} + +static inline void mv_crqb_pack_cmd(u16 *cmdw, u8 data, u8 addr, unsigned last) +{ + *cmdw = data | (addr << CRQB_CMD_ADDR_SHIFT) | CRQB_CMD_CS | + (last ? CRQB_CMD_LAST : 0); +} + +/** + * mv_qc_prep - Host specific command preparation. + * @qc: queued command to prepare + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it handles prep of the CRQB + * (command request block), does some sanity checking, and calls + * the SG load routine. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_qc_prep(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct mv_port_priv *pp = ap->private_data; + u16 *cw; + struct ata_taskfile *tf; + u16 flags = 0; + + if (ATA_PROT_DMA != qc->tf.protocol) { + return; + } + + /* the req producer index should be the same as we remember it */ + assert(((readl(mv_ap_base(qc->ap) + EDMA_REQ_Q_IN_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + + /* Fill in command request block + */ + if (!(qc->tf.flags & ATA_TFLAG_WRITE)) { + flags |= CRQB_FLAG_READ; + } + assert(MV_MAX_Q_DEPTH > qc->tag); + flags |= qc->tag << CRQB_TAG_SHIFT; + + pp->crqb[pp->req_producer].sg_addr = + cpu_to_le32(pp->sg_tbl_dma & 0xffffffff); + pp->crqb[pp->req_producer].sg_addr_hi = + cpu_to_le32((pp->sg_tbl_dma >> 16) >> 16); + pp->crqb[pp->req_producer].ctrl_flags = cpu_to_le16(flags); + + cw = &pp->crqb[pp->req_producer].ata_cmd[0]; + tf = &qc->tf; + + /* Sadly, the CRQB cannot accomodate all registers--there are + * only 11 bytes...so we must pick and choose required + * registers based on the command. So, we drop feature and + * hob_feature for [RW] DMA commands, but they are needed for + * NCQ. NCQ will drop hob_nsect. + */ + switch (tf->command) { + case ATA_CMD_READ: + case ATA_CMD_READ_EXT: + case ATA_CMD_WRITE: + case ATA_CMD_WRITE_EXT: + mv_crqb_pack_cmd(cw++, tf->hob_nsect, ATA_REG_NSECT, 0); + break; +#ifdef LIBATA_NCQ /* FIXME: remove this line when NCQ added */ + case ATA_CMD_FPDMA_READ: + case ATA_CMD_FPDMA_WRITE: + mv_crqb_pack_cmd(cw++, tf->hob_feature, ATA_REG_FEATURE, 0); + mv_crqb_pack_cmd(cw++, tf->feature, ATA_REG_FEATURE, 0); + break; +#endif /* FIXME: remove this line when NCQ added */ + default: + /* The only other commands EDMA supports in non-queued and + * non-NCQ mode are: [RW] STREAM DMA and W DMA FUA EXT, none + * of which are defined/used by Linux. If we get here, this + * driver needs work. + * + * FIXME: modify libata to give qc_prep a return value and + * return error here. + */ + BUG_ON(tf->command); + break; + } + mv_crqb_pack_cmd(cw++, tf->nsect, ATA_REG_NSECT, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->lbal, ATA_REG_LBAL, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->lbam, ATA_REG_LBAM, 0); + mv_crqb_pack_cmd(cw++, tf->hob_lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->lbah, ATA_REG_LBAH, 0); + mv_crqb_pack_cmd(cw++, tf->device, ATA_REG_DEVICE, 0); + mv_crqb_pack_cmd(cw++, tf->command, ATA_REG_CMD, 1); /* last */ + + if (!(qc->flags & ATA_QCFLAG_DMAMAP)) { + return; + } + mv_fill_sg(qc); +} + +/** + * mv_qc_issue - Initiate a command to the host + * @qc: queued command to start + * + * This routine simply redirects to the general purpose routine + * if command is not DMA. Else, it sanity checks our local + * caches of the request producer/consumer indices then enables + * DMA and bumps the request producer index. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_qc_issue(struct ata_queued_cmd *qc) +{ + void __iomem *port_mmio = mv_ap_base(qc->ap); + struct mv_port_priv *pp = qc->ap->private_data; + u32 in_ptr; + + if (ATA_PROT_DMA != qc->tf.protocol) { + /* We're about to send a non-EDMA capable command to the + * port. Turn off EDMA so there won't be problems accessing + * shadow block, etc registers. + */ + mv_stop_dma(qc->ap); + return ata_qc_issue_prot(qc); + } + + in_ptr = readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + /* the req producer index should be the same as we remember it */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->req_producer); + /* until we do queuing, the queue should be empty at this point */ + assert(((in_ptr >> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + ((readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS) >> + EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK)); + + mv_inc_q_index(&pp->req_producer); /* now incr producer index */ + + mv_start_dma(port_mmio, pp); + + /* and write the request in pointer to kick the EDMA to life */ + in_ptr &= EDMA_REQ_Q_BASE_LO_MASK; + in_ptr |= pp->req_producer << EDMA_REQ_Q_PTR_SHIFT; + writelfl(in_ptr, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); + + return 0; +} + +/** + * mv_get_crpb_status - get status from most recently completed cmd + * @ap: ATA channel to manipulate + * + * This routine is for use when the port is in DMA mode, when it + * will be using the CRPB (command response block) method of + * returning command completion information. We assert indices + * are good, grab status, and bump the response consumer index to + * prove that we're up to date. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_get_crpb_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + u32 out_ptr; + + out_ptr = readl(port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* the response consumer index should be the same as we remember it */ + assert(((out_ptr >> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* increment our consumer index... */ + pp->rsp_consumer = mv_inc_q_index(&pp->rsp_consumer); + + /* and, until we do NCQ, there should only be 1 CRPB waiting */ + assert(((readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS) >> + EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK) == + pp->rsp_consumer); + + /* write out our inc'd consumer index so EDMA knows we're caught up */ + out_ptr &= EDMA_RSP_Q_BASE_LO_MASK; + out_ptr |= pp->rsp_consumer << EDMA_RSP_Q_PTR_SHIFT; + writelfl(out_ptr, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); + + /* Return ATA status register for completed CRPB */ + return (pp->crpb[pp->rsp_consumer].flags >> CRPB_FLAG_STATUS_SHIFT); +} + +/** + * mv_err_intr - Handle error interrupts on the port + * @ap: ATA channel to manipulate + * + * In most cases, just clear the interrupt and move on. However, + * some cases require an eDMA reset, which is done right before + * the COMRESET in mv_phy_reset(). The SERR case requires a + * clear of pending errors in the SATA SERROR register. Finally, + * if the port disabled DMA, update our cached copy to match. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_err_intr(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 edma_err_cause, serr = 0; edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -465,8 +1025,12 @@ static void mv_err_intr(struct ata_port *ap) serr = scr_read(ap, SCR_ERROR); scr_write_flush(ap, SCR_ERROR, serr); } - DPRINTK("port %u error; EDMA err cause: 0x%08x SERR: 0x%08x\n", - ap->port_no, edma_err_cause, serr); + if (EDMA_ERR_SELF_DIS & edma_err_cause) { + struct mv_port_priv *pp = ap->private_data; + pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN; + } + DPRINTK(KERN_ERR "ata%u: port error; EDMA err cause: 0x%08x " + "SERR: 0x%08x\n", ap->id, edma_err_cause, serr); /* Clear EDMA now that SERR cleanup done */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); @@ -477,7 +1041,21 @@ static void mv_err_intr(struct ata_port *ap) } } -/* Handle any outstanding interrupts in a single SATAHC +/** + * mv_host_intr - Handle all interrupts on the given host controller + * @host_set: host specific structure + * @relevant: port error bits relevant to this host controller + * @hc: which host controller we're to look at + * + * Read then write clear the HC interrupt status then walk each + * port connected to the HC and see if it needs servicing. Port + * success ints are reported in the HC interrupt status reg, the + * port error ints are reported in the higher level main + * interrupt status register and thus are passed in via the + * 'relevant' argument. + * + * LOCKING: + * Inherited from caller. */ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, unsigned int hc) @@ -487,8 +1065,9 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, struct ata_port *ap; struct ata_queued_cmd *qc; u32 hc_irq_cause; - int shift, port, port0, hard_port; - u8 ata_status; + int shift, port, port0, hard_port, handled; + unsigned int err_mask; + u8 ata_status = 0; if (hc == 0) { port0 = 0; @@ -499,7 +1078,7 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, /* we'll need the HC success int register in most cases */ hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); if (hc_irq_cause) { - writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); + writelfl(~hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); } VPRINTK("ENTER, hc%u relevant=0x%08x HC IRQ cause=0x%08x\n", @@ -508,54 +1087,70 @@ static void mv_host_intr(struct ata_host_set *host_set, u32 relevant, for (port = port0; port < port0 + MV_PORTS_PER_HC; port++) { ap = host_set->ports[port]; hard_port = port & MV_PORT_MASK; /* range 0-3 */ - ata_status = 0xffU; + handled = 0; /* ensure ata_status is set if handled++ */ - if (((CRBP_DMA_DONE | DEV_IRQ) << hard_port) & hc_irq_cause) { - BUG_ON(NULL == ap); - /* rcv'd new resp, basic DMA complete, or ATA IRQ */ - /* This is needed to clear the ATA INTRQ. - * FIXME: don't read the status reg in EDMA mode! + if ((CRPB_DMA_DONE << hard_port) & hc_irq_cause) { + /* new CRPB on the queue; just one at a time until NCQ + */ + ata_status = mv_get_crpb_status(ap); + handled++; + } else if ((DEV_IRQ << hard_port) & hc_irq_cause) { + /* received ATA IRQ; read the status reg to clear INTRQ */ ata_status = readb((void __iomem *) ap->ioaddr.status_addr); + handled++; } - shift = port * 2; + err_mask = ac_err_mask(ata_status); + + shift = port << 1; /* (port * 2) */ if (port >= MV_PORTS_PER_HC) { shift++; /* skip bit 8 in the HC Main IRQ reg */ } if ((PORT0_ERR << shift) & relevant) { mv_err_intr(ap); - /* FIXME: smart to OR in ATA_ERR? */ - ata_status = readb((void __iomem *) - ap->ioaddr.status_addr) | ATA_ERR; + err_mask |= AC_ERR_OTHER; + handled++; } - if (ap) { + if (handled && ap) { qc = ata_qc_from_tag(ap, ap->active_tag); if (NULL != qc) { VPRINTK("port %u IRQ found for qc, " "ata_status 0x%x\n", port,ata_status); - BUG_ON(0xffU == ata_status); /* mark qc status appropriately */ - ata_qc_complete(qc, ata_status); + ata_qc_complete(qc, err_mask); } } } VPRINTK("EXIT\n"); } +/** + * mv_interrupt - + * @irq: unused + * @dev_instance: private data; in this case the host structure + * @regs: unused + * + * Read the read only register to determine if any host + * controllers have pending interrupts. If so, call lower level + * routine to handle. Also check for PCI errors which are only + * reported here. + * + * LOCKING: + * This routine holds the host_set lock while processing pending + * interrupts. + */ static irqreturn_t mv_interrupt(int irq, void *dev_instance, struct pt_regs *regs) { struct ata_host_set *host_set = dev_instance; unsigned int hc, handled = 0, n_hcs; - void __iomem *mmio; + void __iomem *mmio = host_set->mmio_base; u32 irq_stat; - mmio = host_set->mmio_base; irq_stat = readl(mmio + HC_MAIN_IRQ_CAUSE_OFS); - n_hcs = mv_get_hc_count(host_set->ports[0]->flags); /* check the cases where we either have nothing pending or have read * a bogus register value which can indicate HW removal or PCI fault @@ -564,64 +1159,89 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance, return IRQ_NONE; } + n_hcs = mv_get_hc_count(host_set->ports[0]->flags); spin_lock(&host_set->lock); for (hc = 0; hc < n_hcs; hc++) { u32 relevant = irq_stat & (HC0_IRQ_PEND << (hc * HC_SHIFT)); if (relevant) { mv_host_intr(host_set, relevant, hc); - handled = 1; + handled++; } } if (PCI_ERR & irq_stat) { - /* FIXME: these are all masked by default, but still need - * to recover from them properly. - */ - } + printk(KERN_ERR DRV_NAME ": PCI ERROR; PCI IRQ cause=0x%08x\n", + readl(mmio + PCI_IRQ_CAUSE_OFS)); + DPRINTK("All regs @ PCI error\n"); + mv_dump_all_regs(mmio, -1, to_pci_dev(host_set->dev)); + + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + handled++; + } spin_unlock(&host_set->lock); return IRQ_RETVAL(handled); } +/** + * mv_phy_reset - Perform eDMA reset followed by COMRESET + * @ap: ATA channel to manipulate + * + * Part of this is taken from __sata_phy_reset and modified to + * not sleep since this routine gets called from interrupt level. + * + * LOCKING: + * Inherited from caller. This is coded to safe to call at + * interrupt level, i.e. it does not sleep. + */ static void mv_phy_reset(struct ata_port *ap) { void __iomem *port_mmio = mv_ap_base(ap); struct ata_taskfile tf; struct ata_device *dev = &ap->device[0]; - u32 edma = 0, bdma; + unsigned long timeout; VPRINTK("ENTER, port %u, mmio 0x%p\n", ap->port_no, port_mmio); - edma = readl(port_mmio + EDMA_CMD_OFS); - if (EDMA_EN & edma) { - /* disable EDMA if active */ - edma &= ~EDMA_EN; - writelfl(edma | EDMA_DS, port_mmio + EDMA_CMD_OFS); - udelay(1); - } else if (mv_port_bdma_capable(ap) && - (bdma = readl(port_mmio + BDMA_CMD_OFS)) & BDMA_START) { - /* disable BDMA if active */ - writelfl(bdma & ~BDMA_START, port_mmio + BDMA_CMD_OFS); - } + mv_stop_dma(ap); - writelfl(edma | ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(ATA_RST, port_mmio + EDMA_CMD_OFS); udelay(25); /* allow reset propagation */ /* Spec never mentions clearing the bit. Marvell's driver does * clear the bit, however. */ - writelfl(edma & ~ATA_RST, port_mmio + EDMA_CMD_OFS); + writelfl(0, port_mmio + EDMA_CMD_OFS); - VPRINTK("Done. Now calling __sata_phy_reset()\n"); + VPRINTK("S-regs after ATA_RST: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); /* proceed to init communications via the scr_control reg */ - __sata_phy_reset(ap); + scr_write_flush(ap, SCR_CONTROL, 0x301); + mdelay(1); + scr_write_flush(ap, SCR_CONTROL, 0x300); + timeout = jiffies + (HZ * 1); + do { + mdelay(10); + if ((scr_read(ap, SCR_STATUS) & 0xf) != 1) + break; + } while (time_before(jiffies, timeout)); + + VPRINTK("S-regs after PHY wake: SStat 0x%08x SErr 0x%08x " + "SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS), + mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL)); - if (ap->flags & ATA_FLAG_PORT_DISABLED) { - VPRINTK("Port disabled pre-sig. Exiting.\n"); + if (sata_dev_present(ap)) { + ata_port_probe(ap); + } else { + printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n", + ap->id, scr_read(ap, SCR_STATUS)); + ata_port_disable(ap); return; } + ap->cbl = ATA_CBL_SATA; tf.lbah = readb((void __iomem *) ap->ioaddr.lbah_addr); tf.lbam = readb((void __iomem *) ap->ioaddr.lbam_addr); @@ -636,37 +1256,118 @@ static void mv_phy_reset(struct ata_port *ap) VPRINTK("EXIT\n"); } -static void mv_port_init(struct ata_ioports *port, unsigned long base) +/** + * mv_eng_timeout - Routine called by libata when SCSI times out I/O + * @ap: ATA channel to manipulate + * + * Intent is to clear all pending error conditions, reset the + * chip/bus, fail the command, and move on. + * + * LOCKING: + * This routine holds the host_set lock while failing the command. + */ +static void mv_eng_timeout(struct ata_port *ap) +{ + struct ata_queued_cmd *qc; + unsigned long flags; + + printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id); + DPRINTK("All regs @ start of eng_timeout\n"); + mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no, + to_pci_dev(ap->host_set->dev)); + + qc = ata_qc_from_tag(ap, ap->active_tag); + printk(KERN_ERR "mmio_base %p ap %p qc %p scsi_cmnd %p &cmnd %p\n", + ap->host_set->mmio_base, ap, qc, qc->scsicmd, + &qc->scsicmd->cmnd); + + mv_err_intr(ap); + mv_phy_reset(ap); + + if (!qc) { + printk(KERN_ERR "ata%u: BUG: timeout without command\n", + ap->id); + } else { + /* hack alert! We cannot use the supplied completion + * function from inside the ->eh_strategy_handler() thread. + * libata is the only user of ->eh_strategy_handler() in + * any kernel, so the default scsi_done() assumes it is + * not being called from the SCSI EH. + */ + spin_lock_irqsave(&ap->host_set->lock, flags); + qc->scsidone = scsi_finish_command; + ata_qc_complete(qc, AC_ERR_OTHER); + spin_unlock_irqrestore(&ap->host_set->lock, flags); + } +} + +/** + * mv_port_init - Perform some early initialization on a single port. + * @port: libata data structure storing shadow register addresses + * @port_mmio: base address of the port + * + * Initialize shadow register mmio addresses, clear outstanding + * interrupts on the port, and unmask interrupts for the future + * start of the port. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_port_init(struct ata_ioports *port, void __iomem *port_mmio) { - /* PIO related setup */ - port->data_addr = base + SHD_PIO_DATA_OFS; - port->error_addr = port->feature_addr = base + SHD_FEA_ERR_OFS; - port->nsect_addr = base + SHD_SECT_CNT_OFS; - port->lbal_addr = base + SHD_LBA_L_OFS; - port->lbam_addr = base + SHD_LBA_M_OFS; - port->lbah_addr = base + SHD_LBA_H_OFS; - port->device_addr = base + SHD_DEV_HD_OFS; - port->status_addr = port->command_addr = base + SHD_CMD_STA_OFS; - port->altstatus_addr = port->ctl_addr = base + SHD_CTL_AST_OFS; - /* unused */ + unsigned long shd_base = (unsigned long) port_mmio + SHD_BLK_OFS; + unsigned serr_ofs; + + /* PIO related setup + */ + port->data_addr = shd_base + (sizeof(u32) * ATA_REG_DATA); + port->error_addr = + port->feature_addr = shd_base + (sizeof(u32) * ATA_REG_ERR); + port->nsect_addr = shd_base + (sizeof(u32) * ATA_REG_NSECT); + port->lbal_addr = shd_base + (sizeof(u32) * ATA_REG_LBAL); + port->lbam_addr = shd_base + (sizeof(u32) * ATA_REG_LBAM); + port->lbah_addr = shd_base + (sizeof(u32) * ATA_REG_LBAH); + port->device_addr = shd_base + (sizeof(u32) * ATA_REG_DEVICE); + port->status_addr = + port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS); + /* special case: control/altstatus doesn't have ATA_REG_ address */ + port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS; + + /* unused: */ port->cmd_addr = port->bmdma_addr = port->scr_addr = 0; + /* Clear any currently outstanding port interrupt conditions */ + serr_ofs = mv_scr_offset(SCR_ERROR); + writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs); + writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); + /* unmask all EDMA error interrupts */ - writel(~0, (void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS); + writelfl(~0, port_mmio + EDMA_ERR_IRQ_MASK_OFS); VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n", - readl((void __iomem *)base + EDMA_CFG_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_CAUSE_OFS), - readl((void __iomem *)base + EDMA_ERR_IRQ_MASK_OFS)); + readl(port_mmio + EDMA_CFG_OFS), + readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS), + readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS)); } +/** + * mv_host_init - Perform some early initialization of the host. + * @probe_ent: early data struct representing the host + * + * If possible, do an early global reset of the host. Then do + * our port init and clear/unmask all/relevant host interrupts. + * + * LOCKING: + * Inherited from caller. + */ static int mv_host_init(struct ata_probe_ent *probe_ent) { int rc = 0, n_hc, port, hc; void __iomem *mmio = probe_ent->mmio_base; void __iomem *port_mmio; - if (mv_master_reset(probe_ent->mmio_base)) { + if ((MV_FLAG_GLBL_SFT_RST & probe_ent->host_flags) && + mv_global_soft_reset(probe_ent->mmio_base)) { rc = 1; goto done; } @@ -676,17 +1377,27 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) for (port = 0; port < probe_ent->n_ports; port++) { port_mmio = mv_port_base(mmio, port); - mv_port_init(&probe_ent->port[port], (unsigned long)port_mmio); + mv_port_init(&probe_ent->port[port], port_mmio); } for (hc = 0; hc < n_hc; hc++) { - VPRINTK("HC%i: HC config=0x%08x HC IRQ cause=0x%08x\n", hc, - readl(mv_hc_base(mmio, hc) + HC_CFG_OFS), - readl(mv_hc_base(mmio, hc) + HC_IRQ_CAUSE_OFS)); + void __iomem *hc_mmio = mv_hc_base(mmio, hc); + + VPRINTK("HC%i: HC config=0x%08x HC IRQ cause " + "(before clear)=0x%08x\n", hc, + readl(hc_mmio + HC_CFG_OFS), + readl(hc_mmio + HC_IRQ_CAUSE_OFS)); + + /* Clear any currently outstanding hc interrupt conditions */ + writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - writel(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); - writel(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + /* Clear any currently outstanding host interrupt conditions */ + writelfl(0, mmio + PCI_IRQ_CAUSE_OFS); + + /* and unmask interrupt generation for host regs */ + writelfl(PCI_UNMASK_ALL_IRQS, mmio + PCI_IRQ_MASK_OFS); + writelfl(~HC_MAIN_MASKED_IRQS, mmio + HC_MAIN_IRQ_MASK_OFS); VPRINTK("HC MAIN IRQ cause/mask=0x%08x/0x%08x " "PCI int cause/mask=0x%08x/0x%08x\n", @@ -694,11 +1405,53 @@ static int mv_host_init(struct ata_probe_ent *probe_ent) readl(mmio + HC_MAIN_IRQ_MASK_OFS), readl(mmio + PCI_IRQ_CAUSE_OFS), readl(mmio + PCI_IRQ_MASK_OFS)); - - done: +done: return rc; } +/** + * mv_print_info - Dump key info to kernel log for perusal. + * @probe_ent: early data struct representing the host + * + * FIXME: complete this. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_print_info(struct ata_probe_ent *probe_ent) +{ + struct pci_dev *pdev = to_pci_dev(probe_ent->dev); + struct mv_host_priv *hpriv = probe_ent->private_data; + u8 rev_id, scc; + const char *scc_s; + + /* Use this to determine the HW stepping of the chip so we know + * what errata to workaround + */ + pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id); + + pci_read_config_byte(pdev, PCI_CLASS_DEVICE, &scc); + if (scc == 0) + scc_s = "SCSI"; + else if (scc == 0x01) + scc_s = "RAID"; + else + scc_s = "unknown"; + + dev_printk(KERN_INFO, &pdev->dev, + "%u slots %u ports %s mode IRQ via %s\n", + (unsigned)MV_MAX_Q_DEPTH, probe_ent->n_ports, + scc_s, (MV_HP_FLAG_MSI & hpriv->hp_flags) ? "MSI" : "INTx"); +} + +/** + * mv_init_one - handle a positive probe of a Marvell host + * @pdev: PCI device found + * @ent: PCI device ID entry for the matched host + * + * LOCKING: + * Inherited from caller. + */ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version = 0; @@ -706,15 +1459,10 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) struct mv_host_priv *hpriv; unsigned int board_idx = (unsigned int)ent->driver_data; void __iomem *mmio_base; - int pci_dev_busy = 0; - int rc; + int pci_dev_busy = 0, rc; - if (!printed_version++) { - printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); - } - - VPRINTK("ENTER for PCI Bus:Slot.Func=%u:%u.%u\n", pdev->bus->number, - PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn)); + if (!printed_version++) + dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n"); rc = pci_enable_device(pdev); if (rc) { @@ -727,8 +1475,6 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out; } - pci_intx(pdev, 1); - probe_ent = kmalloc(sizeof(*probe_ent), GFP_KERNEL); if (probe_ent == NULL) { rc = -ENOMEM; @@ -739,8 +1485,7 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->dev = pci_dev_to_dev(pdev); INIT_LIST_HEAD(&probe_ent->node); - mmio_base = ioremap_nocache(pci_resource_start(pdev, MV_PRIMARY_BAR), - pci_resource_len(pdev, MV_PRIMARY_BAR)); + mmio_base = pci_iomap(pdev, MV_PRIMARY_BAR, 0); if (mmio_base == NULL) { rc = -ENOMEM; goto err_out_free_ent; @@ -769,37 +1514,40 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (rc) { goto err_out_hpriv; } -/* mv_print_info(probe_ent); */ - { - int b, w; - u32 dw[4]; /* hold a line of 16b */ - VPRINTK("PCI config space:\n"); - for (b = 0; b < 0x40; ) { - for (w = 0; w < 4; w++) { - (void) pci_read_config_dword(pdev,b,&dw[w]); - b += sizeof(*dw); - } - VPRINTK("%08x %08x %08x %08x\n", - dw[0],dw[1],dw[2],dw[3]); - } + /* Enable interrupts */ + if (pci_enable_msi(pdev) == 0) { + hpriv->hp_flags |= MV_HP_FLAG_MSI; + } else { + pci_intx(pdev, 1); } - /* FIXME: check ata_device_add return value */ - ata_device_add(probe_ent); - kfree(probe_ent); + mv_dump_pci_cfg(pdev, 0x68); + mv_print_info(probe_ent); + + if (ata_device_add(probe_ent) == 0) { + rc = -ENODEV; /* No devices discovered */ + goto err_out_dev_add; + } + kfree(probe_ent); return 0; - err_out_hpriv: +err_out_dev_add: + if (MV_HP_FLAG_MSI & hpriv->hp_flags) { + pci_disable_msi(pdev); + } else { + pci_intx(pdev, 0); + } +err_out_hpriv: kfree(hpriv); - err_out_iounmap: - iounmap(mmio_base); - err_out_free_ent: +err_out_iounmap: + pci_iounmap(pdev, mmio_base); +err_out_free_ent: kfree(probe_ent); - err_out_regions: +err_out_regions: pci_release_regions(pdev); - err_out: +err_out: if (!pci_dev_busy) { pci_disable_device(pdev); } |