summaryrefslogtreecommitdiff
path: root/drivers/scsi/scsi_scan.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/scsi_scan.c')
-rw-r--r--drivers/scsi/scsi_scan.c1473
1 files changed, 1473 insertions, 0 deletions
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
new file mode 100644
index 000000000000..a8a37a338c02
--- /dev/null
+++ b/drivers/scsi/scsi_scan.c
@@ -0,0 +1,1473 @@
+/*
+ * scsi_scan.c
+ *
+ * Copyright (C) 2000 Eric Youngdale,
+ * Copyright (C) 2002 Patrick Mansfield
+ *
+ * The general scanning/probing algorithm is as follows, exceptions are
+ * made to it depending on device specific flags, compilation options, and
+ * global variable (boot or module load time) settings.
+ *
+ * A specific LUN is scanned via an INQUIRY command; if the LUN has a
+ * device attached, a Scsi_Device is allocated and setup for it.
+ *
+ * For every id of every channel on the given host:
+ *
+ * Scan LUN 0; if the target responds to LUN 0 (even if there is no
+ * device or storage attached to LUN 0):
+ *
+ * If LUN 0 has a device attached, allocate and setup a
+ * Scsi_Device for it.
+ *
+ * If target is SCSI-3 or up, issue a REPORT LUN, and scan
+ * all of the LUNs returned by the REPORT LUN; else,
+ * sequentially scan LUNs up until some maximum is reached,
+ * or a LUN is seen that cannot have a device attached to it.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <asm/semaphore.h>
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_driver.h>
+#include <scsi/scsi_devinfo.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_request.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_eh.h>
+
+#include "scsi_priv.h"
+#include "scsi_logging.h"
+
+#define ALLOC_FAILURE_MSG KERN_ERR "%s: Allocation failure during" \
+ " SCSI scanning, some SCSI devices might not be configured\n"
+
+/*
+ * Default timeout
+ */
+#define SCSI_TIMEOUT (2*HZ)
+
+/*
+ * Prefix values for the SCSI id's (stored in driverfs name field)
+ */
+#define SCSI_UID_SER_NUM 'S'
+#define SCSI_UID_UNKNOWN 'Z'
+
+/*
+ * Return values of some of the scanning functions.
+ *
+ * SCSI_SCAN_NO_RESPONSE: no valid response received from the target, this
+ * includes allocation or general failures preventing IO from being sent.
+ *
+ * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is available
+ * on the given LUN.
+ *
+ * SCSI_SCAN_LUN_PRESENT: target responded, and a device is available on a
+ * given LUN.
+ */
+#define SCSI_SCAN_NO_RESPONSE 0
+#define SCSI_SCAN_TARGET_PRESENT 1
+#define SCSI_SCAN_LUN_PRESENT 2
+
+static char *scsi_null_device_strs = "nullnullnullnull";
+
+#define MAX_SCSI_LUNS 512
+
+#ifdef CONFIG_SCSI_MULTI_LUN
+static unsigned int max_scsi_luns = MAX_SCSI_LUNS;
+#else
+static unsigned int max_scsi_luns = 1;
+#endif
+
+module_param_named(max_luns, max_scsi_luns, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(max_luns,
+ "last scsi LUN (should be between 1 and 2^32-1)");
+
+/*
+ * max_scsi_report_luns: the maximum number of LUNS that will be
+ * returned from the REPORT LUNS command. 8 times this value must
+ * be allocated. In theory this could be up to an 8 byte value, but
+ * in practice, the maximum number of LUNs suppored by any device
+ * is about 16k.
+ */
+static unsigned int max_scsi_report_luns = 511;
+
+module_param_named(max_report_luns, max_scsi_report_luns, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(max_report_luns,
+ "REPORT LUNS maximum number of LUNS received (should be"
+ " between 1 and 16384)");
+
+static unsigned int scsi_inq_timeout = SCSI_TIMEOUT/HZ+3;
+
+module_param_named(inq_timeout, scsi_inq_timeout, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(inq_timeout,
+ "Timeout (in seconds) waiting for devices to answer INQUIRY."
+ " Default is 5. Some non-compliant devices need more.");
+
+/**
+ * scsi_unlock_floptical - unlock device via a special MODE SENSE command
+ * @sreq: used to send the command
+ * @result: area to store the result of the MODE SENSE
+ *
+ * Description:
+ * Send a vendor specific MODE SENSE (not a MODE SELECT) command using
+ * @sreq to unlock a device, storing the (unused) results into result.
+ * Called for BLIST_KEY devices.
+ **/
+static void scsi_unlock_floptical(struct scsi_request *sreq,
+ unsigned char *result)
+{
+ unsigned char scsi_cmd[MAX_COMMAND_SIZE];
+
+ printk(KERN_NOTICE "scsi: unlocking floptical drive\n");
+ scsi_cmd[0] = MODE_SENSE;
+ scsi_cmd[1] = 0;
+ scsi_cmd[2] = 0x2e;
+ scsi_cmd[3] = 0;
+ scsi_cmd[4] = 0x2a; /* size */
+ scsi_cmd[5] = 0;
+ sreq->sr_cmd_len = 0;
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+ scsi_wait_req(sreq, scsi_cmd, result, 0x2a /* size */, SCSI_TIMEOUT, 3);
+}
+
+/**
+ * print_inquiry - printk the inquiry information
+ * @inq_result: printk this SCSI INQUIRY
+ *
+ * Description:
+ * printk the vendor, model, and other information found in the
+ * INQUIRY data in @inq_result.
+ *
+ * Notes:
+ * Remove this, and replace with a hotplug event that logs any
+ * relevant information.
+ **/
+static void print_inquiry(unsigned char *inq_result)
+{
+ int i;
+
+ printk(KERN_NOTICE " Vendor: ");
+ for (i = 8; i < 16; i++)
+ if (inq_result[i] >= 0x20 && i < inq_result[4] + 5)
+ printk("%c", inq_result[i]);
+ else
+ printk(" ");
+
+ printk(" Model: ");
+ for (i = 16; i < 32; i++)
+ if (inq_result[i] >= 0x20 && i < inq_result[4] + 5)
+ printk("%c", inq_result[i]);
+ else
+ printk(" ");
+
+ printk(" Rev: ");
+ for (i = 32; i < 36; i++)
+ if (inq_result[i] >= 0x20 && i < inq_result[4] + 5)
+ printk("%c", inq_result[i]);
+ else
+ printk(" ");
+
+ printk("\n");
+
+ i = inq_result[0] & 0x1f;
+
+ printk(KERN_NOTICE " Type: %s ",
+ i <
+ MAX_SCSI_DEVICE_CODE ? scsi_device_types[i] :
+ "Unknown ");
+ printk(" ANSI SCSI revision: %02x",
+ inq_result[2] & 0x07);
+ if ((inq_result[2] & 0x07) == 1 && (inq_result[3] & 0x0f) == 1)
+ printk(" CCS\n");
+ else
+ printk("\n");
+}
+
+/**
+ * scsi_alloc_sdev - allocate and setup a scsi_Device
+ *
+ * Description:
+ * Allocate, initialize for io, and return a pointer to a scsi_Device.
+ * Stores the @shost, @channel, @id, and @lun in the scsi_Device, and
+ * adds scsi_Device to the appropriate list.
+ *
+ * Return value:
+ * scsi_Device pointer, or NULL on failure.
+ **/
+static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
+ unsigned int lun, void *hostdata)
+{
+ struct scsi_device *sdev;
+ int display_failure_msg = 1, ret;
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+
+ sdev = kmalloc(sizeof(*sdev) + shost->transportt->device_size,
+ GFP_ATOMIC);
+ if (!sdev)
+ goto out;
+
+ memset(sdev, 0, sizeof(*sdev));
+ sdev->vendor = scsi_null_device_strs;
+ sdev->model = scsi_null_device_strs;
+ sdev->rev = scsi_null_device_strs;
+ sdev->host = shost;
+ sdev->id = starget->id;
+ sdev->lun = lun;
+ sdev->channel = starget->channel;
+ sdev->sdev_state = SDEV_CREATED;
+ INIT_LIST_HEAD(&sdev->siblings);
+ INIT_LIST_HEAD(&sdev->same_target_siblings);
+ INIT_LIST_HEAD(&sdev->cmd_list);
+ INIT_LIST_HEAD(&sdev->starved_entry);
+ spin_lock_init(&sdev->list_lock);
+
+ sdev->sdev_gendev.parent = get_device(&starget->dev);
+ sdev->sdev_target = starget;
+
+ /* usually NULL and set by ->slave_alloc instead */
+ sdev->hostdata = hostdata;
+
+ /* if the device needs this changing, it may do so in the
+ * slave_configure function */
+ sdev->max_device_blocked = SCSI_DEFAULT_DEVICE_BLOCKED;
+
+ /*
+ * Some low level driver could use device->type
+ */
+ sdev->type = -1;
+
+ /*
+ * Assume that the device will have handshaking problems,
+ * and then fix this field later if it turns out it
+ * doesn't
+ */
+ sdev->borken = 1;
+
+ spin_lock_init(&sdev->sdev_lock);
+ sdev->request_queue = scsi_alloc_queue(sdev);
+ if (!sdev->request_queue) {
+ /* release fn is set up in scsi_sysfs_device_initialise, so
+ * have to free and put manually here */
+ put_device(&starget->dev);
+ goto out;
+ }
+
+ sdev->request_queue->queuedata = sdev;
+ scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
+
+ scsi_sysfs_device_initialize(sdev);
+
+ if (shost->hostt->slave_alloc) {
+ ret = shost->hostt->slave_alloc(sdev);
+ if (ret) {
+ /*
+ * if LLDD reports slave not present, don't clutter
+ * console with alloc failure messages
+
+
+ */
+ if (ret == -ENXIO)
+ display_failure_msg = 0;
+ goto out_device_destroy;
+ }
+ }
+
+ return sdev;
+
+out_device_destroy:
+ transport_destroy_device(&sdev->sdev_gendev);
+ scsi_free_queue(sdev->request_queue);
+ put_device(&sdev->sdev_gendev);
+out:
+ if (display_failure_msg)
+ printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+ return NULL;
+}
+
+static void scsi_target_dev_release(struct device *dev)
+{
+ struct device *parent = dev->parent;
+ struct scsi_target *starget = to_scsi_target(dev);
+ kfree(starget);
+ put_device(parent);
+}
+
+int scsi_is_target_device(const struct device *dev)
+{
+ return dev->release == scsi_target_dev_release;
+}
+EXPORT_SYMBOL(scsi_is_target_device);
+
+static struct scsi_target *__scsi_find_target(struct device *parent,
+ int channel, uint id)
+{
+ struct scsi_target *starget, *found_starget = NULL;
+ struct Scsi_Host *shost = dev_to_shost(parent);
+ /*
+ * Search for an existing target for this sdev.
+ */
+ list_for_each_entry(starget, &shost->__targets, siblings) {
+ if (starget->id == id &&
+ starget->channel == channel) {
+ found_starget = starget;
+ break;
+ }
+ }
+ if (found_starget)
+ get_device(&found_starget->dev);
+
+ return found_starget;
+}
+
+static struct scsi_target *scsi_alloc_target(struct device *parent,
+ int channel, uint id)
+{
+ struct Scsi_Host *shost = dev_to_shost(parent);
+ struct device *dev = NULL;
+ unsigned long flags;
+ const int size = sizeof(struct scsi_target)
+ + shost->transportt->target_size;
+ struct scsi_target *starget = kmalloc(size, GFP_ATOMIC);
+ struct scsi_target *found_target;
+
+ if (!starget) {
+ printk(KERN_ERR "%s: allocation failure\n", __FUNCTION__);
+ return NULL;
+ }
+ memset(starget, 0, size);
+ dev = &starget->dev;
+ device_initialize(dev);
+ starget->reap_ref = 1;
+ dev->parent = get_device(parent);
+ dev->release = scsi_target_dev_release;
+ sprintf(dev->bus_id, "target%d:%d:%d",
+ shost->host_no, channel, id);
+ starget->id = id;
+ starget->channel = channel;
+ INIT_LIST_HEAD(&starget->siblings);
+ INIT_LIST_HEAD(&starget->devices);
+ spin_lock_irqsave(shost->host_lock, flags);
+
+ found_target = __scsi_find_target(parent, channel, id);
+ if (found_target)
+ goto found;
+
+ list_add_tail(&starget->siblings, &shost->__targets);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ /* allocate and add */
+ transport_setup_device(&starget->dev);
+ device_add(&starget->dev);
+ transport_add_device(&starget->dev);
+ return starget;
+
+ found:
+ found_target->reap_ref++;
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ put_device(parent);
+ kfree(starget);
+ return found_target;
+}
+
+/**
+ * scsi_target_reap - check to see if target is in use and destroy if not
+ *
+ * @starget: target to be checked
+ *
+ * This is used after removing a LUN or doing a last put of the target
+ * it checks atomically that nothing is using the target and removes
+ * it if so.
+ */
+void scsi_target_reap(struct scsi_target *starget)
+{
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+ unsigned long flags;
+ spin_lock_irqsave(shost->host_lock, flags);
+
+ if (--starget->reap_ref == 0 && list_empty(&starget->devices)) {
+ list_del_init(&starget->siblings);
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ device_del(&starget->dev);
+ transport_unregister_device(&starget->dev);
+ put_device(&starget->dev);
+ return;
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
+
+/**
+ * scsi_probe_lun - probe a single LUN using a SCSI INQUIRY
+ * @sreq: used to send the INQUIRY
+ * @inq_result: area to store the INQUIRY result
+ * @bflags: store any bflags found here
+ *
+ * Description:
+ * Probe the lun associated with @sreq using a standard SCSI INQUIRY;
+ *
+ * If the INQUIRY is successful, sreq->sr_result is zero and: the
+ * INQUIRY data is in @inq_result; the scsi_level and INQUIRY length
+ * are copied to the Scsi_Device at @sreq->sr_device (sdev);
+ * any flags value is stored in *@bflags.
+ **/
+static void scsi_probe_lun(struct scsi_request *sreq, char *inq_result,
+ int *bflags)
+{
+ struct scsi_device *sdev = sreq->sr_device; /* a bit ugly */
+ unsigned char scsi_cmd[MAX_COMMAND_SIZE];
+ int first_inquiry_len, try_inquiry_len, next_inquiry_len;
+ int response_len = 0;
+ int pass, count;
+ struct scsi_sense_hdr sshdr;
+
+ *bflags = 0;
+
+ /* Perform up to 3 passes. The first pass uses a conservative
+ * transfer length of 36 unless sdev->inquiry_len specifies a
+ * different value. */
+ first_inquiry_len = sdev->inquiry_len ? sdev->inquiry_len : 36;
+ try_inquiry_len = first_inquiry_len;
+ pass = 1;
+
+ next_pass:
+ SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY pass %d "
+ "to host %d channel %d id %d lun %d, length %d\n",
+ pass, sdev->host->host_no, sdev->channel,
+ sdev->id, sdev->lun, try_inquiry_len));
+
+ /* Each pass gets up to three chances to ignore Unit Attention */
+ for (count = 0; count < 3; ++count) {
+ memset(scsi_cmd, 0, 6);
+ scsi_cmd[0] = INQUIRY;
+ scsi_cmd[4] = (unsigned char) try_inquiry_len;
+ sreq->sr_cmd_len = 0;
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+
+ memset(inq_result, 0, try_inquiry_len);
+ scsi_wait_req(sreq, (void *) scsi_cmd, (void *) inq_result,
+ try_inquiry_len,
+ HZ/2 + HZ*scsi_inq_timeout, 3);
+
+ SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: INQUIRY %s "
+ "with code 0x%x\n",
+ sreq->sr_result ? "failed" : "successful",
+ sreq->sr_result));
+
+ if (sreq->sr_result) {
+ /*
+ * not-ready to ready transition [asc/ascq=0x28/0x0]
+ * or power-on, reset [asc/ascq=0x29/0x0], continue.
+ * INQUIRY should not yield UNIT_ATTENTION
+ * but many buggy devices do so anyway.
+ */
+ if ((driver_byte(sreq->sr_result) & DRIVER_SENSE) &&
+ scsi_request_normalize_sense(sreq, &sshdr)) {
+ if ((sshdr.sense_key == UNIT_ATTENTION) &&
+ ((sshdr.asc == 0x28) ||
+ (sshdr.asc == 0x29)) &&
+ (sshdr.ascq == 0))
+ continue;
+ }
+ }
+ break;
+ }
+
+ if (sreq->sr_result == 0) {
+ response_len = (unsigned char) inq_result[4] + 5;
+ if (response_len > 255)
+ response_len = first_inquiry_len; /* sanity */
+
+ /*
+ * Get any flags for this device.
+ *
+ * XXX add a bflags to Scsi_Device, and replace the
+ * corresponding bit fields in Scsi_Device, so bflags
+ * need not be passed as an argument.
+ */
+ *bflags = scsi_get_device_flags(sdev, &inq_result[8],
+ &inq_result[16]);
+
+ /* When the first pass succeeds we gain information about
+ * what larger transfer lengths might work. */
+ if (pass == 1) {
+ if (BLIST_INQUIRY_36 & *bflags)
+ next_inquiry_len = 36;
+ else if (BLIST_INQUIRY_58 & *bflags)
+ next_inquiry_len = 58;
+ else if (sdev->inquiry_len)
+ next_inquiry_len = sdev->inquiry_len;
+ else
+ next_inquiry_len = response_len;
+
+ /* If more data is available perform the second pass */
+ if (next_inquiry_len > try_inquiry_len) {
+ try_inquiry_len = next_inquiry_len;
+ pass = 2;
+ goto next_pass;
+ }
+ }
+
+ } else if (pass == 2) {
+ printk(KERN_INFO "scsi scan: %d byte inquiry failed. "
+ "Consider BLIST_INQUIRY_36 for this device\n",
+ try_inquiry_len);
+
+ /* If this pass failed, the third pass goes back and transfers
+ * the same amount as we successfully got in the first pass. */
+ try_inquiry_len = first_inquiry_len;
+ pass = 3;
+ goto next_pass;
+ }
+
+ /* If the last transfer attempt got an error, assume the
+ * peripheral doesn't exist or is dead. */
+ if (sreq->sr_result)
+ return;
+
+ /* Don't report any more data than the device says is valid */
+ sdev->inquiry_len = min(try_inquiry_len, response_len);
+
+ /*
+ * XXX Abort if the response length is less than 36? If less than
+ * 32, the lookup of the device flags (above) could be invalid,
+ * and it would be possible to take an incorrect action - we do
+ * not want to hang because of a short INQUIRY. On the flip side,
+ * if the device is spun down or becoming ready (and so it gives a
+ * short INQUIRY), an abort here prevents any further use of the
+ * device, including spin up.
+ *
+ * Related to the above issue:
+ *
+ * XXX Devices (disk or all?) should be sent a TEST UNIT READY,
+ * and if not ready, sent a START_STOP to start (maybe spin up) and
+ * then send the INQUIRY again, since the INQUIRY can change after
+ * a device is initialized.
+ *
+ * Ideally, start a device if explicitly asked to do so. This
+ * assumes that a device is spun up on power on, spun down on
+ * request, and then spun up on request.
+ */
+
+ /*
+ * The scanning code needs to know the scsi_level, even if no
+ * device is attached at LUN 0 (SCSI_SCAN_TARGET_PRESENT) so
+ * non-zero LUNs can be scanned.
+ */
+ sdev->scsi_level = inq_result[2] & 0x07;
+ if (sdev->scsi_level >= 2 ||
+ (sdev->scsi_level == 1 && (inq_result[3] & 0x0f) == 1))
+ sdev->scsi_level++;
+
+ return;
+}
+
+/**
+ * scsi_add_lun - allocate and fully initialze a Scsi_Device
+ * @sdevscan: holds information to be stored in the new Scsi_Device
+ * @sdevnew: store the address of the newly allocated Scsi_Device
+ * @inq_result: holds the result of a previous INQUIRY to the LUN
+ * @bflags: black/white list flag
+ *
+ * Description:
+ * Allocate and initialize a Scsi_Device matching sdevscan. Optionally
+ * set fields based on values in *@bflags. If @sdevnew is not
+ * NULL, store the address of the new Scsi_Device in *@sdevnew (needed
+ * when scanning a particular LUN).
+ *
+ * Return:
+ * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device
+ * SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
+ **/
+static int scsi_add_lun(struct scsi_device *sdev, char *inq_result, int *bflags)
+{
+ /*
+ * XXX do not save the inquiry, since it can change underneath us,
+ * save just vendor/model/rev.
+ *
+ * Rather than save it and have an ioctl that retrieves the saved
+ * value, have an ioctl that executes the same INQUIRY code used
+ * in scsi_probe_lun, let user level programs doing INQUIRY
+ * scanning run at their own risk, or supply a user level program
+ * that can correctly scan.
+ */
+ sdev->inquiry = kmalloc(sdev->inquiry_len, GFP_ATOMIC);
+ if (sdev->inquiry == NULL) {
+ return SCSI_SCAN_NO_RESPONSE;
+ }
+
+ memcpy(sdev->inquiry, inq_result, sdev->inquiry_len);
+ sdev->vendor = (char *) (sdev->inquiry + 8);
+ sdev->model = (char *) (sdev->inquiry + 16);
+ sdev->rev = (char *) (sdev->inquiry + 32);
+
+ if (*bflags & BLIST_ISROM) {
+ /*
+ * It would be better to modify sdev->type, and set
+ * sdev->removable, but then the print_inquiry() output
+ * would not show TYPE_ROM; if print_inquiry() is removed
+ * the issue goes away.
+ */
+ inq_result[0] = TYPE_ROM;
+ inq_result[1] |= 0x80; /* removable */
+ } else if (*bflags & BLIST_NO_ULD_ATTACH)
+ sdev->no_uld_attach = 1;
+
+ switch (sdev->type = (inq_result[0] & 0x1f)) {
+ case TYPE_TAPE:
+ case TYPE_DISK:
+ case TYPE_PRINTER:
+ case TYPE_MOD:
+ case TYPE_PROCESSOR:
+ case TYPE_SCANNER:
+ case TYPE_MEDIUM_CHANGER:
+ case TYPE_ENCLOSURE:
+ case TYPE_COMM:
+ sdev->writeable = 1;
+ break;
+ case TYPE_WORM:
+ case TYPE_ROM:
+ sdev->writeable = 0;
+ break;
+ default:
+ printk(KERN_INFO "scsi: unknown device type %d\n", sdev->type);
+ }
+
+ print_inquiry(inq_result);
+
+ /*
+ * For a peripheral qualifier (PQ) value of 1 (001b), the SCSI
+ * spec says: The device server is capable of supporting the
+ * specified peripheral device type on this logical unit. However,
+ * the physical device is not currently connected to this logical
+ * unit.
+ *
+ * The above is vague, as it implies that we could treat 001 and
+ * 011 the same. Stay compatible with previous code, and create a
+ * Scsi_Device for a PQ of 1
+ *
+ * Don't set the device offline here; rather let the upper
+ * level drivers eval the PQ to decide whether they should
+ * attach. So remove ((inq_result[0] >> 5) & 7) == 1 check.
+ */
+
+ sdev->inq_periph_qual = (inq_result[0] >> 5) & 7;
+ sdev->removable = (0x80 & inq_result[1]) >> 7;
+ sdev->lockable = sdev->removable;
+ sdev->soft_reset = (inq_result[7] & 1) && ((inq_result[3] & 7) == 2);
+
+ if (sdev->scsi_level >= SCSI_3 || (sdev->inquiry_len > 56 &&
+ inq_result[56] & 0x04))
+ sdev->ppr = 1;
+ if (inq_result[7] & 0x60)
+ sdev->wdtr = 1;
+ if (inq_result[7] & 0x10)
+ sdev->sdtr = 1;
+
+ sprintf(sdev->devfs_name, "scsi/host%d/bus%d/target%d/lun%d",
+ sdev->host->host_no, sdev->channel,
+ sdev->id, sdev->lun);
+
+ /*
+ * End driverfs/devfs code.
+ */
+
+ if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) &&
+ !(*bflags & BLIST_NOTQ))
+ sdev->tagged_supported = 1;
+ /*
+ * Some devices (Texel CD ROM drives) have handshaking problems
+ * when used with the Seagate controllers. borken is initialized
+ * to 1, and then set it to 0 here.
+ */
+ if ((*bflags & BLIST_BORKEN) == 0)
+ sdev->borken = 0;
+
+ /*
+ * Apparently some really broken devices (contrary to the SCSI
+ * standards) need to be selected without asserting ATN
+ */
+ if (*bflags & BLIST_SELECT_NO_ATN)
+ sdev->select_no_atn = 1;
+
+ /*
+ * Some devices may not want to have a start command automatically
+ * issued when a device is added.
+ */
+ if (*bflags & BLIST_NOSTARTONADD)
+ sdev->no_start_on_add = 1;
+
+ if (*bflags & BLIST_SINGLELUN)
+ sdev->single_lun = 1;
+
+
+ sdev->use_10_for_rw = 1;
+
+ if (*bflags & BLIST_MS_SKIP_PAGE_08)
+ sdev->skip_ms_page_8 = 1;
+
+ if (*bflags & BLIST_MS_SKIP_PAGE_3F)
+ sdev->skip_ms_page_3f = 1;
+
+ if (*bflags & BLIST_USE_10_BYTE_MS)
+ sdev->use_10_for_ms = 1;
+
+ /* set the device running here so that slave configure
+ * may do I/O */
+ scsi_device_set_state(sdev, SDEV_RUNNING);
+
+ if (*bflags & BLIST_MS_192_BYTES_FOR_3F)
+ sdev->use_192_bytes_for_3f = 1;
+
+ if (*bflags & BLIST_NOT_LOCKABLE)
+ sdev->lockable = 0;
+
+ if (*bflags & BLIST_RETRY_HWERROR)
+ sdev->retry_hwerror = 1;
+
+ transport_configure_device(&sdev->sdev_gendev);
+
+ if (sdev->host->hostt->slave_configure)
+ sdev->host->hostt->slave_configure(sdev);
+
+ /*
+ * Ok, the device is now all set up, we can
+ * register it and tell the rest of the kernel
+ * about it.
+ */
+ scsi_sysfs_add_sdev(sdev);
+
+ return SCSI_SCAN_LUN_PRESENT;
+}
+
+/**
+ * scsi_probe_and_add_lun - probe a LUN, if a LUN is found add it
+ * @starget: pointer to target device structure
+ * @lun: LUN of target device
+ * @sdevscan: probe the LUN corresponding to this Scsi_Device
+ * @sdevnew: store the value of any new Scsi_Device allocated
+ * @bflagsp: store bflags here if not NULL
+ *
+ * Description:
+ * Call scsi_probe_lun, if a LUN with an attached device is found,
+ * allocate and set it up by calling scsi_add_lun.
+ *
+ * Return:
+ * SCSI_SCAN_NO_RESPONSE: could not allocate or setup a Scsi_Device
+ * SCSI_SCAN_TARGET_PRESENT: target responded, but no device is
+ * attached at the LUN
+ * SCSI_SCAN_LUN_PRESENT: a new Scsi_Device was allocated and initialized
+ **/
+static int scsi_probe_and_add_lun(struct scsi_target *starget,
+ uint lun, int *bflagsp,
+ struct scsi_device **sdevp, int rescan,
+ void *hostdata)
+{
+ struct scsi_device *sdev;
+ struct scsi_request *sreq;
+ unsigned char *result;
+ int bflags, res = SCSI_SCAN_NO_RESPONSE;
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+
+ /*
+ * The rescan flag is used as an optimization, the first scan of a
+ * host adapter calls into here with rescan == 0.
+ */
+ if (rescan) {
+ sdev = scsi_device_lookup_by_target(starget, lun);
+ if (sdev) {
+ SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
+ "scsi scan: device exists on %s\n",
+ sdev->sdev_gendev.bus_id));
+ if (sdevp)
+ *sdevp = sdev;
+ else
+ scsi_device_put(sdev);
+
+ if (bflagsp)
+ *bflagsp = scsi_get_device_flags(sdev,
+ sdev->vendor,
+ sdev->model);
+ return SCSI_SCAN_LUN_PRESENT;
+ }
+ }
+
+ sdev = scsi_alloc_sdev(starget, lun, hostdata);
+ if (!sdev)
+ goto out;
+ sreq = scsi_allocate_request(sdev, GFP_ATOMIC);
+ if (!sreq)
+ goto out_free_sdev;
+ result = kmalloc(256, GFP_ATOMIC |
+ (shost->unchecked_isa_dma) ? __GFP_DMA : 0);
+ if (!result)
+ goto out_free_sreq;
+
+ scsi_probe_lun(sreq, result, &bflags);
+ if (sreq->sr_result)
+ goto out_free_result;
+
+ /*
+ * result contains valid SCSI INQUIRY data.
+ */
+ if ((result[0] >> 5) == 3) {
+ /*
+ * For a Peripheral qualifier 3 (011b), the SCSI
+ * spec says: The device server is not capable of
+ * supporting a physical device on this logical
+ * unit.
+ *
+ * For disks, this implies that there is no
+ * logical disk configured at sdev->lun, but there
+ * is a target id responding.
+ */
+ SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO
+ "scsi scan: peripheral qualifier of 3,"
+ " no device added\n"));
+ res = SCSI_SCAN_TARGET_PRESENT;
+ goto out_free_result;
+ }
+
+ res = scsi_add_lun(sdev, result, &bflags);
+ if (res == SCSI_SCAN_LUN_PRESENT) {
+ if (bflags & BLIST_KEY) {
+ sdev->lockable = 0;
+ scsi_unlock_floptical(sreq, result);
+ }
+ if (bflagsp)
+ *bflagsp = bflags;
+ }
+
+ out_free_result:
+ kfree(result);
+ out_free_sreq:
+ scsi_release_request(sreq);
+ out_free_sdev:
+ if (res == SCSI_SCAN_LUN_PRESENT) {
+ if (sdevp) {
+ scsi_device_get(sdev);
+ *sdevp = sdev;
+ }
+ } else {
+ if (sdev->host->hostt->slave_destroy)
+ sdev->host->hostt->slave_destroy(sdev);
+ transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_gendev);
+ }
+ out:
+ return res;
+}
+
+/**
+ * scsi_sequential_lun_scan - sequentially scan a SCSI target
+ * @starget: pointer to target structure to scan
+ * @bflags: black/white list flag for LUN 0
+ * @lun0_res: result of scanning LUN 0
+ *
+ * Description:
+ * Generally, scan from LUN 1 (LUN 0 is assumed to already have been
+ * scanned) to some maximum lun until a LUN is found with no device
+ * attached. Use the bflags to figure out any oddities.
+ *
+ * Modifies sdevscan->lun.
+ **/
+static void scsi_sequential_lun_scan(struct scsi_target *starget,
+ int bflags, int lun0_res, int scsi_level,
+ int rescan)
+{
+ unsigned int sparse_lun, lun, max_dev_lun;
+ struct Scsi_Host *shost = dev_to_shost(starget->dev.parent);
+
+ SCSI_LOG_SCAN_BUS(3, printk(KERN_INFO "scsi scan: Sequential scan of"
+ "%s\n", starget->dev.bus_id));
+
+ max_dev_lun = min(max_scsi_luns, shost->max_lun);
+ /*
+ * If this device is known to support sparse multiple units,
+ * override the other settings, and scan all of them. Normally,
+ * SCSI-3 devices should be scanned via the REPORT LUNS.
+ */
+ if (bflags & BLIST_SPARSELUN) {
+ max_dev_lun = shost->max_lun;
+ sparse_lun = 1;
+ } else
+ sparse_lun = 0;
+
+ /*
+ * If not sparse lun and no device attached at LUN 0 do not scan
+ * any further.
+ */
+ if (!sparse_lun && (lun0_res != SCSI_SCAN_LUN_PRESENT))
+ return;
+
+ /*
+ * If less than SCSI_1_CSS, and no special lun scaning, stop
+ * scanning; this matches 2.4 behaviour, but could just be a bug
+ * (to continue scanning a SCSI_1_CSS device).
+ *
+ * This test is broken. We might not have any device on lun0 for
+ * a sparselun device, and if that's the case then how would we
+ * know the real scsi_level, eh? It might make sense to just not
+ * scan any SCSI_1 device for non-0 luns, but that check would best
+ * go into scsi_alloc_sdev() and just have it return null when asked
+ * to alloc an sdev for lun > 0 on an already found SCSI_1 device.
+ *
+ if ((sdevscan->scsi_level < SCSI_1_CCS) &&
+ ((bflags & (BLIST_FORCELUN | BLIST_SPARSELUN | BLIST_MAX5LUN))
+ == 0))
+ return;
+ */
+ /*
+ * If this device is known to support multiple units, override
+ * the other settings, and scan all of them.
+ */
+ if (bflags & BLIST_FORCELUN)
+ max_dev_lun = shost->max_lun;
+ /*
+ * REGAL CDC-4X: avoid hang after LUN 4
+ */
+ if (bflags & BLIST_MAX5LUN)
+ max_dev_lun = min(5U, max_dev_lun);
+ /*
+ * Do not scan SCSI-2 or lower device past LUN 7, unless
+ * BLIST_LARGELUN.
+ */
+ if (scsi_level < SCSI_3 && !(bflags & BLIST_LARGELUN))
+ max_dev_lun = min(8U, max_dev_lun);
+
+ /*
+ * We have already scanned LUN 0, so start at LUN 1. Keep scanning
+ * until we reach the max, or no LUN is found and we are not
+ * sparse_lun.
+ */
+ for (lun = 1; lun < max_dev_lun; ++lun)
+ if ((scsi_probe_and_add_lun(starget, lun, NULL, NULL, rescan,
+ NULL) != SCSI_SCAN_LUN_PRESENT) &&
+ !sparse_lun)
+ return;
+}
+
+/**
+ * scsilun_to_int: convert a scsi_lun to an int
+ * @scsilun: struct scsi_lun to be converted.
+ *
+ * Description:
+ * Convert @scsilun from a struct scsi_lun to a four byte host byte-ordered
+ * integer, and return the result. The caller must check for
+ * truncation before using this function.
+ *
+ * Notes:
+ * The struct scsi_lun is assumed to be four levels, with each level
+ * effectively containing a SCSI byte-ordered (big endian) short; the
+ * addressing bits of each level are ignored (the highest two bits).
+ * For a description of the LUN format, post SCSI-3 see the SCSI
+ * Architecture Model, for SCSI-3 see the SCSI Controller Commands.
+ *
+ * Given a struct scsi_lun of: 0a 04 0b 03 00 00 00 00, this function returns
+ * the integer: 0x0b030a04
+ **/
+static int scsilun_to_int(struct scsi_lun *scsilun)
+{
+ int i;
+ unsigned int lun;
+
+ lun = 0;
+ for (i = 0; i < sizeof(lun); i += 2)
+ lun = lun | (((scsilun->scsi_lun[i] << 8) |
+ scsilun->scsi_lun[i + 1]) << (i * 8));
+ return lun;
+}
+
+/**
+ * scsi_report_lun_scan - Scan using SCSI REPORT LUN results
+ * @sdevscan: scan the host, channel, and id of this Scsi_Device
+ *
+ * Description:
+ * If @sdevscan is for a SCSI-3 or up device, send a REPORT LUN
+ * command, and scan the resulting list of LUNs by calling
+ * scsi_probe_and_add_lun.
+ *
+ * Modifies sdevscan->lun.
+ *
+ * Return:
+ * 0: scan completed (or no memory, so further scanning is futile)
+ * 1: no report lun scan, or not configured
+ **/
+static int scsi_report_lun_scan(struct scsi_device *sdev, int bflags,
+ int rescan)
+{
+ char devname[64];
+ unsigned char scsi_cmd[MAX_COMMAND_SIZE];
+ unsigned int length;
+ unsigned int lun;
+ unsigned int num_luns;
+ unsigned int retries;
+ struct scsi_lun *lunp, *lun_data;
+ struct scsi_request *sreq;
+ u8 *data;
+ struct scsi_sense_hdr sshdr;
+ struct scsi_target *starget = scsi_target(sdev);
+
+ /*
+ * Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
+ * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
+ * support more than 8 LUNs.
+ */
+ if ((bflags & BLIST_NOREPORTLUN) ||
+ sdev->scsi_level < SCSI_2 ||
+ (sdev->scsi_level < SCSI_3 &&
+ (!(bflags & BLIST_REPORTLUN2) || sdev->host->max_lun <= 8)) )
+ return 1;
+ if (bflags & BLIST_NOLUN)
+ return 0;
+
+ sreq = scsi_allocate_request(sdev, GFP_ATOMIC);
+ if (!sreq)
+ goto out;
+
+ sprintf(devname, "host %d channel %d id %d",
+ sdev->host->host_no, sdev->channel, sdev->id);
+
+ /*
+ * Allocate enough to hold the header (the same size as one scsi_lun)
+ * plus the max number of luns we are requesting.
+ *
+ * Reallocating and trying again (with the exact amount we need)
+ * would be nice, but then we need to somehow limit the size
+ * allocated based on the available memory and the limits of
+ * kmalloc - we don't want a kmalloc() failure of a huge value to
+ * prevent us from finding any LUNs on this target.
+ */
+ length = (max_scsi_report_luns + 1) * sizeof(struct scsi_lun);
+ lun_data = kmalloc(length, GFP_ATOMIC |
+ (sdev->host->unchecked_isa_dma ? __GFP_DMA : 0));
+ if (!lun_data)
+ goto out_release_request;
+
+ scsi_cmd[0] = REPORT_LUNS;
+
+ /*
+ * bytes 1 - 5: reserved, set to zero.
+ */
+ memset(&scsi_cmd[1], 0, 5);
+
+ /*
+ * bytes 6 - 9: length of the command.
+ */
+ scsi_cmd[6] = (unsigned char) (length >> 24) & 0xff;
+ scsi_cmd[7] = (unsigned char) (length >> 16) & 0xff;
+ scsi_cmd[8] = (unsigned char) (length >> 8) & 0xff;
+ scsi_cmd[9] = (unsigned char) length & 0xff;
+
+ scsi_cmd[10] = 0; /* reserved */
+ scsi_cmd[11] = 0; /* control */
+ sreq->sr_cmd_len = 0;
+ sreq->sr_data_direction = DMA_FROM_DEVICE;
+
+ /*
+ * We can get a UNIT ATTENTION, for example a power on/reset, so
+ * retry a few times (like sd.c does for TEST UNIT READY).
+ * Experience shows some combinations of adapter/devices get at
+ * least two power on/resets.
+ *
+ * Illegal requests (for devices that do not support REPORT LUNS)
+ * should come through as a check condition, and will not generate
+ * a retry.
+ */
+ for (retries = 0; retries < 3; retries++) {
+ SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: Sending"
+ " REPORT LUNS to %s (try %d)\n", devname,
+ retries));
+ scsi_wait_req(sreq, scsi_cmd, lun_data, length,
+ SCSI_TIMEOUT + 4*HZ, 3);
+ SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUNS"
+ " %s (try %d) result 0x%x\n", sreq->sr_result
+ ? "failed" : "successful", retries,
+ sreq->sr_result));
+ if (sreq->sr_result == 0)
+ break;
+ else if (scsi_request_normalize_sense(sreq, &sshdr)) {
+ if (sshdr.sense_key != UNIT_ATTENTION)
+ break;
+ }
+ }
+
+ if (sreq->sr_result) {
+ /*
+ * The device probably does not support a REPORT LUN command
+ */
+ kfree(lun_data);
+ scsi_release_request(sreq);
+ return 1;
+ }
+ scsi_release_request(sreq);
+
+ /*
+ * Get the length from the first four bytes of lun_data.
+ */
+ data = (u8 *) lun_data->scsi_lun;
+ length = ((data[0] << 24) | (data[1] << 16) |
+ (data[2] << 8) | (data[3] << 0));
+
+ num_luns = (length / sizeof(struct scsi_lun));
+ if (num_luns > max_scsi_report_luns) {
+ printk(KERN_WARNING "scsi: On %s only %d (max_scsi_report_luns)"
+ " of %d luns reported, try increasing"
+ " max_scsi_report_luns.\n", devname,
+ max_scsi_report_luns, num_luns);
+ num_luns = max_scsi_report_luns;
+ }
+
+ SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "scsi scan: REPORT LUN scan of"
+ " host %d channel %d id %d\n", sdev->host->host_no,
+ sdev->channel, sdev->id));
+
+ /*
+ * Scan the luns in lun_data. The entry at offset 0 is really
+ * the header, so start at 1 and go up to and including num_luns.
+ */
+ for (lunp = &lun_data[1]; lunp <= &lun_data[num_luns]; lunp++) {
+ lun = scsilun_to_int(lunp);
+
+ /*
+ * Check if the unused part of lunp is non-zero, and so
+ * does not fit in lun.
+ */
+ if (memcmp(&lunp->scsi_lun[sizeof(lun)], "\0\0\0\0", 4)) {
+ int i;
+
+ /*
+ * Output an error displaying the LUN in byte order,
+ * this differs from what linux would print for the
+ * integer LUN value.
+ */
+ printk(KERN_WARNING "scsi: %s lun 0x", devname);
+ data = (char *)lunp->scsi_lun;
+ for (i = 0; i < sizeof(struct scsi_lun); i++)
+ printk("%02x", data[i]);
+ printk(" has a LUN larger than currently supported.\n");
+ } else if (lun == 0) {
+ /*
+ * LUN 0 has already been scanned.
+ */
+ } else if (lun > sdev->host->max_lun) {
+ printk(KERN_WARNING "scsi: %s lun%d has a LUN larger"
+ " than allowed by the host adapter\n",
+ devname, lun);
+ } else {
+ int res;
+
+ res = scsi_probe_and_add_lun(starget,
+ lun, NULL, NULL, rescan, NULL);
+ if (res == SCSI_SCAN_NO_RESPONSE) {
+ /*
+ * Got some results, but now none, abort.
+ */
+ printk(KERN_ERR "scsi: Unexpected response"
+ " from %s lun %d while scanning, scan"
+ " aborted\n", devname, lun);
+ break;
+ }
+ }
+ }
+
+ kfree(lun_data);
+ return 0;
+
+ out_release_request:
+ scsi_release_request(sreq);
+ out:
+ /*
+ * We are out of memory, don't try scanning any further.
+ */
+ printk(ALLOC_FAILURE_MSG, __FUNCTION__);
+ return 0;
+}
+
+struct scsi_device *__scsi_add_device(struct Scsi_Host *shost, uint channel,
+ uint id, uint lun, void *hostdata)
+{
+ struct scsi_device *sdev;
+ struct device *parent = &shost->shost_gendev;
+ int res;
+ struct scsi_target *starget = scsi_alloc_target(parent, channel, id);
+
+ if (!starget)
+ return ERR_PTR(-ENOMEM);
+
+ down(&shost->scan_mutex);
+ res = scsi_probe_and_add_lun(starget, lun, NULL, &sdev, 1, hostdata);
+ if (res != SCSI_SCAN_LUN_PRESENT)
+ sdev = ERR_PTR(-ENODEV);
+ up(&shost->scan_mutex);
+ scsi_target_reap(starget);
+ put_device(&starget->dev);
+
+ return sdev;
+}
+EXPORT_SYMBOL(__scsi_add_device);
+
+void scsi_rescan_device(struct device *dev)
+{
+ struct scsi_driver *drv;
+
+ if (!dev->driver)
+ return;
+
+ drv = to_scsi_driver(dev->driver);
+ if (try_module_get(drv->owner)) {
+ if (drv->rescan)
+ drv->rescan(dev);
+ module_put(drv->owner);
+ }
+}
+EXPORT_SYMBOL(scsi_rescan_device);
+
+/**
+ * scsi_scan_target - scan a target id, possibly including all LUNs on the
+ * target.
+ * @sdevsca: Scsi_Device handle for scanning
+ * @shost: host to scan
+ * @channel: channel to scan
+ * @id: target id to scan
+ *
+ * Description:
+ * Scan the target id on @shost, @channel, and @id. Scan at least LUN
+ * 0, and possibly all LUNs on the target id.
+ *
+ * Use the pre-allocated @sdevscan as a handle for the scanning. This
+ * function sets sdevscan->host, sdevscan->id and sdevscan->lun; the
+ * scanning functions modify sdevscan->lun.
+ *
+ * First try a REPORT LUN scan, if that does not scan the target, do a
+ * sequential scan of LUNs on the target id.
+ **/
+void scsi_scan_target(struct device *parent, unsigned int channel,
+ unsigned int id, unsigned int lun, int rescan)
+{
+ struct Scsi_Host *shost = dev_to_shost(parent);
+ int bflags = 0;
+ int res;
+ struct scsi_device *sdev = NULL;
+ struct scsi_target *starget;
+
+ if (shost->this_id == id)
+ /*
+ * Don't scan the host adapter
+ */
+ return;
+
+
+ starget = scsi_alloc_target(parent, channel, id);
+
+ if (!starget)
+ return;
+
+ get_device(&starget->dev);
+ if (lun != SCAN_WILD_CARD) {
+ /*
+ * Scan for a specific host/chan/id/lun.
+ */
+ scsi_probe_and_add_lun(starget, lun, NULL, NULL, rescan, NULL);
+ goto out_reap;
+ }
+
+ /*
+ * Scan LUN 0, if there is some response, scan further. Ideally, we
+ * would not configure LUN 0 until all LUNs are scanned.
+ */
+ res = scsi_probe_and_add_lun(starget, 0, &bflags, &sdev, rescan, NULL);
+ if (res == SCSI_SCAN_LUN_PRESENT) {
+ if (scsi_report_lun_scan(sdev, bflags, rescan) != 0)
+ /*
+ * The REPORT LUN did not scan the target,
+ * do a sequential scan.
+ */
+ scsi_sequential_lun_scan(starget, bflags,
+ res, sdev->scsi_level, rescan);
+ } else if (res == SCSI_SCAN_TARGET_PRESENT) {
+ /*
+ * There's a target here, but lun 0 is offline so we
+ * can't use the report_lun scan. Fall back to a
+ * sequential lun scan with a bflags of SPARSELUN and
+ * a default scsi level of SCSI_2
+ */
+ scsi_sequential_lun_scan(starget, BLIST_SPARSELUN,
+ SCSI_SCAN_TARGET_PRESENT, SCSI_2, rescan);
+ }
+ if (sdev)
+ scsi_device_put(sdev);
+
+ out_reap:
+ /* now determine if the target has any children at all
+ * and if not, nuke it */
+ scsi_target_reap(starget);
+
+ put_device(&starget->dev);
+}
+EXPORT_SYMBOL(scsi_scan_target);
+
+static void scsi_scan_channel(struct Scsi_Host *shost, unsigned int channel,
+ unsigned int id, unsigned int lun, int rescan)
+{
+ uint order_id;
+
+ if (id == SCAN_WILD_CARD)
+ for (id = 0; id < shost->max_id; ++id) {
+ /*
+ * XXX adapter drivers when possible (FCP, iSCSI)
+ * could modify max_id to match the current max,
+ * not the absolute max.
+ *
+ * XXX add a shost id iterator, so for example,
+ * the FC ID can be the same as a target id
+ * without a huge overhead of sparse id's.
+ */
+ if (shost->reverse_ordering)
+ /*
+ * Scan from high to low id.
+ */
+ order_id = shost->max_id - id - 1;
+ else
+ order_id = id;
+ scsi_scan_target(&shost->shost_gendev, channel, order_id, lun, rescan);
+ }
+ else
+ scsi_scan_target(&shost->shost_gendev, channel, id, lun, rescan);
+}
+
+int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
+ unsigned int id, unsigned int lun, int rescan)
+{
+ SCSI_LOG_SCAN_BUS(3, printk (KERN_INFO "%s: <%u:%u:%u:%u>\n",
+ __FUNCTION__, shost->host_no, channel, id, lun));
+
+ if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
+ ((id != SCAN_WILD_CARD) && (id > shost->max_id)) ||
+ ((lun != SCAN_WILD_CARD) && (lun > shost->max_lun)))
+ return -EINVAL;
+
+ down(&shost->scan_mutex);
+ if (channel == SCAN_WILD_CARD)
+ for (channel = 0; channel <= shost->max_channel; channel++)
+ scsi_scan_channel(shost, channel, id, lun, rescan);
+ else
+ scsi_scan_channel(shost, channel, id, lun, rescan);
+ up(&shost->scan_mutex);
+
+ return 0;
+}
+
+/**
+ * scsi_scan_host - scan the given adapter
+ * @shost: adapter to scan
+ **/
+void scsi_scan_host(struct Scsi_Host *shost)
+{
+ scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
+ SCAN_WILD_CARD, 0);
+}
+EXPORT_SYMBOL(scsi_scan_host);
+
+/**
+ * scsi_scan_single_target - scan the given SCSI target
+ * @shost: adapter to scan
+ * @chan: channel to scan
+ * @id: target id to scan
+ **/
+void scsi_scan_single_target(struct Scsi_Host *shost,
+ unsigned int chan, unsigned int id)
+{
+ scsi_scan_host_selected(shost, chan, id, SCAN_WILD_CARD, 1);
+}
+EXPORT_SYMBOL(scsi_scan_single_target);
+
+void scsi_forget_host(struct Scsi_Host *shost)
+{
+ struct scsi_target *starget, *tmp;
+ unsigned long flags;
+
+ /*
+ * Ok, this look a bit strange. We always look for the first device
+ * on the list as scsi_remove_device removes them from it - thus we
+ * also have to release the lock.
+ * We don't need to get another reference to the device before
+ * releasing the lock as we already own the reference from
+ * scsi_register_device that's release in scsi_remove_device. And
+ * after that we don't look at sdev anymore.
+ */
+ spin_lock_irqsave(shost->host_lock, flags);
+ list_for_each_entry_safe(starget, tmp, &shost->__targets, siblings) {
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ scsi_remove_target(&starget->dev);
+ spin_lock_irqsave(shost->host_lock, flags);
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
+
+/*
+ * Function: scsi_get_host_dev()
+ *
+ * Purpose: Create a Scsi_Device that points to the host adapter itself.
+ *
+ * Arguments: SHpnt - Host that needs a Scsi_Device
+ *
+ * Lock status: None assumed.
+ *
+ * Returns: The Scsi_Device or NULL
+ *
+ * Notes:
+ * Attach a single Scsi_Device to the Scsi_Host - this should
+ * be made to look like a "pseudo-device" that points to the
+ * HA itself.
+ *
+ * Note - this device is not accessible from any high-level
+ * drivers (including generics), which is probably not
+ * optimal. We can add hooks later to attach
+ */
+struct scsi_device *scsi_get_host_dev(struct Scsi_Host *shost)
+{
+ struct scsi_device *sdev;
+ struct scsi_target *starget;
+
+ starget = scsi_alloc_target(&shost->shost_gendev, 0, shost->this_id);
+ if (!starget)
+ return NULL;
+
+ sdev = scsi_alloc_sdev(starget, 0, NULL);
+ if (sdev) {
+ sdev->sdev_gendev.parent = get_device(&starget->dev);
+ sdev->borken = 0;
+ }
+ put_device(&starget->dev);
+ return sdev;
+}
+EXPORT_SYMBOL(scsi_get_host_dev);
+
+/*
+ * Function: scsi_free_host_dev()
+ *
+ * Purpose: Free a scsi_device that points to the host adapter itself.
+ *
+ * Arguments: SHpnt - Host that needs a Scsi_Device
+ *
+ * Lock status: None assumed.
+ *
+ * Returns: Nothing
+ *
+ * Notes:
+ */
+void scsi_free_host_dev(struct scsi_device *sdev)
+{
+ BUG_ON(sdev->id != sdev->host->this_id);
+
+ if (sdev->host->hostt->slave_destroy)
+ sdev->host->hostt->slave_destroy(sdev);
+ transport_destroy_device(&sdev->sdev_gendev);
+ put_device(&sdev->sdev_gendev);
+}
+EXPORT_SYMBOL(scsi_free_host_dev);
+