summaryrefslogtreecommitdiff
path: root/drivers/scsi/stex.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/scsi/stex.c')
-rw-r--r--drivers/scsi/stex.c90
1 files changed, 54 insertions, 36 deletions
diff --git a/drivers/scsi/stex.c b/drivers/scsi/stex.c
index baf516d09d79..adda296b594b 100644
--- a/drivers/scsi/stex.c
+++ b/drivers/scsi/stex.c
@@ -32,11 +32,12 @@
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
+#include <scsi/scsi_dbg.h>
#define DRV_NAME "stex"
-#define ST_DRIVER_VERSION "3.1.0.1"
+#define ST_DRIVER_VERSION "3.6.0000.1"
#define ST_VER_MAJOR 3
-#define ST_VER_MINOR 1
+#define ST_VER_MINOR 6
#define ST_OEM 0
#define ST_BUILD_VER 1
@@ -113,10 +114,6 @@ enum {
SG_CF_64B = 0x40, /* 64 bit item */
SG_CF_HOST = 0x20, /* sg in host memory */
- ST_MAX_ARRAY_SUPPORTED = 16,
- ST_MAX_TARGET_NUM = (ST_MAX_ARRAY_SUPPORTED+1),
- ST_MAX_LUN_PER_TARGET = 16,
-
st_shasta = 0,
st_vsc = 1,
st_vsc1 = 2,
@@ -561,7 +558,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
u16 tag;
host = cmd->device->host;
id = cmd->device->id;
- lun = cmd->device->channel; /* firmware lun issue work around */
+ lun = cmd->device->lun;
hba = (struct st_hba *) &host->hostdata[0];
switch (cmd->cmnd[0]) {
@@ -580,8 +577,26 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
stex_invalid_field(cmd, done);
return 0;
}
+ case REPORT_LUNS:
+ /*
+ * The shasta firmware does not report actual luns in the
+ * target, so fail the command to force sequential lun scan.
+ * Also, the console device does not support this command.
+ */
+ if (hba->cardtype == st_shasta || id == host->max_id - 1) {
+ stex_invalid_field(cmd, done);
+ return 0;
+ }
+ break;
+ case TEST_UNIT_READY:
+ if (id == host->max_id - 1) {
+ cmd->result = DID_OK << 16 | COMMAND_COMPLETE << 8;
+ done(cmd);
+ return 0;
+ }
+ break;
case INQUIRY:
- if (id != ST_MAX_ARRAY_SUPPORTED)
+ if (id != host->max_id - 1)
break;
if (lun == 0 && (cmd->cmnd[1] & INQUIRY_EVPD) == 0) {
stex_direct_copy(cmd, console_inq_page,
@@ -599,7 +614,7 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
ver.oem = ST_OEM;
ver.build = ST_BUILD_VER;
ver.signature[0] = PASSTHRU_SIGNATURE;
- ver.console_id = ST_MAX_ARRAY_SUPPORTED;
+ ver.console_id = host->max_id - 1;
ver.host_no = hba->host->host_no;
cmd->result = stex_direct_copy(cmd, &ver, sizeof(ver)) ?
DID_OK << 16 | COMMAND_COMPLETE << 8 :
@@ -620,13 +635,8 @@ stex_queuecommand(struct scsi_cmnd *cmd, void (* done)(struct scsi_cmnd *))
req = stex_alloc_req(hba);
- if (hba->cardtype == st_yosemite) {
- req->lun = lun * (ST_MAX_TARGET_NUM - 1) + id;
- req->target = 0;
- } else {
- req->lun = lun;
- req->target = id;
- }
+ req->lun = lun;
+ req->target = id;
/* cdb */
memcpy(req->cdb, cmd->cmnd, STEX_CDB_LENGTH);
@@ -730,18 +740,6 @@ static void stex_ys_commands(struct st_hba *hba,
ccb->srb_status = SRB_STATUS_SELECTION_TIMEOUT;
else
ccb->srb_status = SRB_STATUS_SUCCESS;
- } else if (ccb->cmd->cmnd[0] == REPORT_LUNS) {
- u8 *report_lun_data = (u8 *)hba->copy_buffer;
-
- count = STEX_EXTRA_SIZE;
- stex_internal_copy(ccb->cmd, report_lun_data,
- &count, ccb->sg_count, ST_FROM_CMD);
- if (report_lun_data[2] || report_lun_data[3]) {
- report_lun_data[2] = 0x00;
- report_lun_data[3] = 0x08;
- stex_internal_copy(ccb->cmd, report_lun_data,
- &count, ccb->sg_count, ST_TO_CMD);
- }
}
}
@@ -958,6 +956,11 @@ static int stex_abort(struct scsi_cmnd *cmd)
u32 data;
int result = SUCCESS;
unsigned long flags;
+
+ printk(KERN_INFO DRV_NAME
+ "(%s): aborting command\n", pci_name(hba->pdev));
+ scsi_print_command(cmd);
+
base = hba->mmio_base;
spin_lock_irqsave(host->host_lock, flags);
if (tag < host->can_queue && hba->ccb[tag].cmd == cmd)
@@ -1014,7 +1017,12 @@ static void stex_hard_reset(struct st_hba *hba)
pci_read_config_byte(bus->self, PCI_BRIDGE_CONTROL, &pci_bctl);
pci_bctl |= PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);
- msleep(1);
+
+ /*
+ * 1 ms may be enough for 8-port controllers. But 16-port controllers
+ * require more time to finish bus reset. Use 100 ms here for safety
+ */
+ msleep(100);
pci_bctl &= ~PCI_BRIDGE_CTL_BUS_RESET;
pci_write_config_byte(bus->self, PCI_BRIDGE_CONTROL, pci_bctl);
@@ -1038,6 +1046,10 @@ static int stex_reset(struct scsi_cmnd *cmd)
unsigned long before;
hba = (struct st_hba *) &cmd->device->host->hostdata[0];
+ printk(KERN_INFO DRV_NAME
+ "(%s): resetting host\n", pci_name(hba->pdev));
+ scsi_print_command(cmd);
+
hba->mu_status = MU_STATE_RESETTING;
if (hba->cardtype == st_shasta)
@@ -1157,7 +1169,7 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
goto out_scsi_host_put;
}
- hba->mmio_base = ioremap(pci_resource_start(pdev, 0),
+ hba->mmio_base = ioremap_nocache(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
if ( !hba->mmio_base) {
printk(KERN_ERR DRV_NAME "(%s): memory map failed\n",
@@ -1192,12 +1204,18 @@ stex_probe(struct pci_dev *pdev, const struct pci_device_id *id)
hba->copy_buffer = hba->dma_mem + MU_BUFFER_SIZE;
hba->mu_status = MU_STATE_STARTING;
- /* firmware uses id/lun pair for a logical drive, but lun would be
- always 0 if CONFIG_SCSI_MULTI_LUN not configured, so we use
- channel to map lun here */
- host->max_channel = ST_MAX_LUN_PER_TARGET - 1;
- host->max_id = ST_MAX_TARGET_NUM;
- host->max_lun = 1;
+ if (hba->cardtype == st_shasta) {
+ host->max_lun = 8;
+ host->max_id = 16 + 1;
+ } else if (hba->cardtype == st_yosemite) {
+ host->max_lun = 128;
+ host->max_id = 1 + 1;
+ } else {
+ /* st_vsc and st_vsc1 */
+ host->max_lun = 1;
+ host->max_id = 128 + 1;
+ }
+ host->max_channel = 0;
host->unique_id = host->host_no;
host->max_cmd_len = STEX_CDB_LENGTH;
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 05:49:13 +0000