diff options
Diffstat (limited to 'drivers/scsi/ufs/ufs-qcom.c')
| -rw-r--r-- | drivers/scsi/ufs/ufs-qcom.c | 1004 |
1 files changed, 1004 insertions, 0 deletions
diff --git a/drivers/scsi/ufs/ufs-qcom.c b/drivers/scsi/ufs/ufs-qcom.c new file mode 100644 index 000000000000..9217af9bf734 --- /dev/null +++ b/drivers/scsi/ufs/ufs-qcom.c @@ -0,0 +1,1004 @@ +/* + * Copyright (c) 2013-2015, Linux Foundation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/time.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> + +#include <linux/phy/phy-qcom-ufs.h> +#include "ufshcd.h" +#include "unipro.h" +#include "ufs-qcom.h" +#include "ufshci.h" + +static struct ufs_qcom_host *ufs_qcom_hosts[MAX_UFS_QCOM_HOSTS]; + +static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result); +static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host, + const char *speed_mode); +static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote); + +static int ufs_qcom_get_connected_tx_lanes(struct ufs_hba *hba, u32 *tx_lanes) +{ + int err = 0; + + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), tx_lanes); + if (err) + dev_err(hba->dev, "%s: couldn't read PA_CONNECTEDTXDATALANES %d\n", + __func__, err); + + return err; +} + +static int ufs_qcom_host_clk_get(struct device *dev, + const char *name, struct clk **clk_out) +{ + struct clk *clk; + int err = 0; + + clk = devm_clk_get(dev, name); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + dev_err(dev, "%s: failed to get %s err %d", + __func__, name, err); + } else { + *clk_out = clk; + } + + return err; +} + +static int ufs_qcom_host_clk_enable(struct device *dev, + const char *name, struct clk *clk) +{ + int err = 0; + + err = clk_prepare_enable(clk); + if (err) + dev_err(dev, "%s: %s enable failed %d\n", __func__, name, err); + + return err; +} + +static void ufs_qcom_disable_lane_clks(struct ufs_qcom_host *host) +{ + if (!host->is_lane_clks_enabled) + return; + + clk_disable_unprepare(host->tx_l1_sync_clk); + clk_disable_unprepare(host->tx_l0_sync_clk); + clk_disable_unprepare(host->rx_l1_sync_clk); + clk_disable_unprepare(host->rx_l0_sync_clk); + + host->is_lane_clks_enabled = false; +} + +static int ufs_qcom_enable_lane_clks(struct ufs_qcom_host *host) +{ + int err = 0; + struct device *dev = host->hba->dev; + + if (host->is_lane_clks_enabled) + return 0; + + err = ufs_qcom_host_clk_enable(dev, "rx_lane0_sync_clk", + host->rx_l0_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_enable(dev, "tx_lane0_sync_clk", + host->tx_l0_sync_clk); + if (err) + goto disable_rx_l0; + + err = ufs_qcom_host_clk_enable(dev, "rx_lane1_sync_clk", + host->rx_l1_sync_clk); + if (err) + goto disable_tx_l0; + + err = ufs_qcom_host_clk_enable(dev, "tx_lane1_sync_clk", + host->tx_l1_sync_clk); + if (err) + goto disable_rx_l1; + + host->is_lane_clks_enabled = true; + goto out; + +disable_rx_l1: + clk_disable_unprepare(host->rx_l1_sync_clk); +disable_tx_l0: + clk_disable_unprepare(host->tx_l0_sync_clk); +disable_rx_l0: + clk_disable_unprepare(host->rx_l0_sync_clk); +out: + return err; +} + +static int ufs_qcom_init_lane_clks(struct ufs_qcom_host *host) +{ + int err = 0; + struct device *dev = host->hba->dev; + + err = ufs_qcom_host_clk_get(dev, + "rx_lane0_sync_clk", &host->rx_l0_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_get(dev, + "tx_lane0_sync_clk", &host->tx_l0_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_get(dev, "rx_lane1_sync_clk", + &host->rx_l1_sync_clk); + if (err) + goto out; + + err = ufs_qcom_host_clk_get(dev, "tx_lane1_sync_clk", + &host->tx_l1_sync_clk); +out: + return err; +} + +static int ufs_qcom_link_startup_post_change(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + u32 tx_lanes; + int err = 0; + + err = ufs_qcom_get_connected_tx_lanes(hba, &tx_lanes); + if (err) + goto out; + + err = ufs_qcom_phy_set_tx_lane_enable(phy, tx_lanes); + if (err) + dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable failed\n", + __func__); + +out: + return err; +} + +static int ufs_qcom_check_hibern8(struct ufs_hba *hba) +{ + int err; + u32 tx_fsm_val = 0; + unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS); + + do { + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val); + if (err || tx_fsm_val == TX_FSM_HIBERN8) + break; + + /* sleep for max. 200us */ + usleep_range(100, 200); + } while (time_before(jiffies, timeout)); + + /* + * we might have scheduled out for long during polling so + * check the state again. + */ + if (time_after(jiffies, timeout)) + err = ufshcd_dme_get(hba, + UIC_ARG_MIB(MPHY_TX_FSM_STATE), &tx_fsm_val); + + if (err) { + dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n", + __func__, err); + } else if (tx_fsm_val != TX_FSM_HIBERN8) { + err = tx_fsm_val; + dev_err(hba->dev, "%s: invalid TX_FSM_STATE = %d\n", + __func__, err); + } + + return err; +} + +static int ufs_qcom_power_up_sequence(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + int ret = 0; + u8 major; + u16 minor, step; + bool is_rate_B = (UFS_QCOM_LIMIT_HS_RATE == PA_HS_MODE_B) + ? true : false; + + /* Assert PHY reset and apply PHY calibration values */ + ufs_qcom_assert_reset(hba); + /* provide 1ms delay to let the reset pulse propagate */ + usleep_range(1000, 1100); + + ufs_qcom_get_controller_revision(hba, &major, &minor, &step); + ufs_qcom_phy_save_controller_version(phy, major, minor, step); + ret = ufs_qcom_phy_calibrate_phy(phy, is_rate_B); + if (ret) { + dev_err(hba->dev, "%s: ufs_qcom_phy_calibrate_phy() failed, ret = %d\n", + __func__, ret); + goto out; + } + + /* De-assert PHY reset and start serdes */ + ufs_qcom_deassert_reset(hba); + + /* + * after reset deassertion, phy will need all ref clocks, + * voltage, current to settle down before starting serdes. + */ + usleep_range(1000, 1100); + ret = ufs_qcom_phy_start_serdes(phy); + if (ret) { + dev_err(hba->dev, "%s: ufs_qcom_phy_start_serdes() failed, ret = %d\n", + __func__, ret); + goto out; + } + + ret = ufs_qcom_phy_is_pcs_ready(phy); + if (ret) + dev_err(hba->dev, "%s: is_physical_coding_sublayer_ready() failed, ret = %d\n", + __func__, ret); + +out: + return ret; +} + +/* + * The UTP controller has a number of internal clock gating cells (CGCs). + * Internal hardware sub-modules within the UTP controller control the CGCs. + * Hardware CGCs disable the clock to inactivate UTP sub-modules not involved + * in a specific operation, UTP controller CGCs are by default disabled and + * this function enables them (after every UFS link startup) to save some power + * leakage. + */ +static void ufs_qcom_enable_hw_clk_gating(struct ufs_hba *hba) +{ + ufshcd_writel(hba, + ufshcd_readl(hba, REG_UFS_CFG2) | REG_UFS_CFG2_CGC_EN_ALL, + REG_UFS_CFG2); + + /* Ensure that HW clock gating is enabled before next operations */ + mb(); +} + +static int ufs_qcom_hce_enable_notify(struct ufs_hba *hba, bool status) +{ + struct ufs_qcom_host *host = hba->priv; + int err = 0; + + switch (status) { + case PRE_CHANGE: + ufs_qcom_power_up_sequence(hba); + /* + * The PHY PLL output is the source of tx/rx lane symbol + * clocks, hence, enable the lane clocks only after PHY + * is initialized. + */ + err = ufs_qcom_enable_lane_clks(host); + break; + case POST_CHANGE: + /* check if UFS PHY moved from DISABLED to HIBERN8 */ + err = ufs_qcom_check_hibern8(hba); + ufs_qcom_enable_hw_clk_gating(hba); + + break; + default: + dev_err(hba->dev, "%s: invalid status %d\n", __func__, status); + err = -EINVAL; + break; + } + return err; +} + +/** + * Returns non-zero for success (which rate of core_clk) and 0 + * in case of a failure + */ +static unsigned long +ufs_qcom_cfg_timers(struct ufs_hba *hba, u32 gear, u32 hs, u32 rate) +{ + struct ufs_clk_info *clki; + u32 core_clk_period_in_ns; + u32 tx_clk_cycles_per_us = 0; + unsigned long core_clk_rate = 0; + u32 core_clk_cycles_per_us = 0; + + static u32 pwm_fr_table[][2] = { + {UFS_PWM_G1, 0x1}, + {UFS_PWM_G2, 0x1}, + {UFS_PWM_G3, 0x1}, + {UFS_PWM_G4, 0x1}, + }; + + static u32 hs_fr_table_rA[][2] = { + {UFS_HS_G1, 0x1F}, + {UFS_HS_G2, 0x3e}, + }; + + static u32 hs_fr_table_rB[][2] = { + {UFS_HS_G1, 0x24}, + {UFS_HS_G2, 0x49}, + }; + + if (gear == 0) { + dev_err(hba->dev, "%s: invalid gear = %d\n", __func__, gear); + goto out_error; + } + + list_for_each_entry(clki, &hba->clk_list_head, list) { + if (!strcmp(clki->name, "core_clk")) + core_clk_rate = clk_get_rate(clki->clk); + } + + /* If frequency is smaller than 1MHz, set to 1MHz */ + if (core_clk_rate < DEFAULT_CLK_RATE_HZ) + core_clk_rate = DEFAULT_CLK_RATE_HZ; + + core_clk_cycles_per_us = core_clk_rate / USEC_PER_SEC; + ufshcd_writel(hba, core_clk_cycles_per_us, REG_UFS_SYS1CLK_1US); + + core_clk_period_in_ns = NSEC_PER_SEC / core_clk_rate; + core_clk_period_in_ns <<= OFFSET_CLK_NS_REG; + core_clk_period_in_ns &= MASK_CLK_NS_REG; + + switch (hs) { + case FASTAUTO_MODE: + case FAST_MODE: + if (rate == PA_HS_MODE_A) { + if (gear > ARRAY_SIZE(hs_fr_table_rA)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(hs_fr_table_rA)); + goto out_error; + } + tx_clk_cycles_per_us = hs_fr_table_rA[gear-1][1]; + } else if (rate == PA_HS_MODE_B) { + if (gear > ARRAY_SIZE(hs_fr_table_rB)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(hs_fr_table_rB)); + goto out_error; + } + tx_clk_cycles_per_us = hs_fr_table_rB[gear-1][1]; + } else { + dev_err(hba->dev, "%s: invalid rate = %d\n", + __func__, rate); + goto out_error; + } + break; + case SLOWAUTO_MODE: + case SLOW_MODE: + if (gear > ARRAY_SIZE(pwm_fr_table)) { + dev_err(hba->dev, + "%s: index %d exceeds table size %zu\n", + __func__, gear, + ARRAY_SIZE(pwm_fr_table)); + goto out_error; + } + tx_clk_cycles_per_us = pwm_fr_table[gear-1][1]; + break; + case UNCHANGED: + default: + dev_err(hba->dev, "%s: invalid mode = %d\n", __func__, hs); + goto out_error; + } + + /* this register 2 fields shall be written at once */ + ufshcd_writel(hba, core_clk_period_in_ns | tx_clk_cycles_per_us, + REG_UFS_TX_SYMBOL_CLK_NS_US); + goto out; + +out_error: + core_clk_rate = 0; +out: + return core_clk_rate; +} + +static int ufs_qcom_link_startup_notify(struct ufs_hba *hba, bool status) +{ + unsigned long core_clk_rate = 0; + u32 core_clk_cycles_per_100ms; + + switch (status) { + case PRE_CHANGE: + core_clk_rate = ufs_qcom_cfg_timers(hba, UFS_PWM_G1, + SLOWAUTO_MODE, 0); + if (!core_clk_rate) { + dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", + __func__); + return -EINVAL; + } + core_clk_cycles_per_100ms = + (core_clk_rate / MSEC_PER_SEC) * 100; + ufshcd_writel(hba, core_clk_cycles_per_100ms, + REG_UFS_PA_LINK_STARTUP_TIMER); + break; + case POST_CHANGE: + ufs_qcom_link_startup_post_change(hba); + break; + default: + break; + } + + return 0; +} + +static int ufs_qcom_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + int ret = 0; + + if (ufs_qcom_is_link_off(hba)) { + /* + * Disable the tx/rx lane symbol clocks before PHY is + * powered down as the PLL source should be disabled + * after downstream clocks are disabled. + */ + ufs_qcom_disable_lane_clks(host); + phy_power_off(phy); + + /* Assert PHY soft reset */ + ufs_qcom_assert_reset(hba); + goto out; + } + + /* + * If UniPro link is not active, PHY ref_clk, main PHY analog power + * rail and low noise analog power rail for PLL can be switched off. + */ + if (!ufs_qcom_is_link_active(hba)) + phy_power_off(phy); + +out: + return ret; +} + +static int ufs_qcom_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) +{ + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + int err; + + err = phy_power_on(phy); + if (err) { + dev_err(hba->dev, "%s: failed enabling regs, err = %d\n", + __func__, err); + goto out; + } + + hba->is_sys_suspended = false; + +out: + return err; +} + +struct ufs_qcom_dev_params { + u32 pwm_rx_gear; /* pwm rx gear to work in */ + u32 pwm_tx_gear; /* pwm tx gear to work in */ + u32 hs_rx_gear; /* hs rx gear to work in */ + u32 hs_tx_gear; /* hs tx gear to work in */ + u32 rx_lanes; /* number of rx lanes */ + u32 tx_lanes; /* number of tx lanes */ + u32 rx_pwr_pwm; /* rx pwm working pwr */ + u32 tx_pwr_pwm; /* tx pwm working pwr */ + u32 rx_pwr_hs; /* rx hs working pwr */ + u32 tx_pwr_hs; /* tx hs working pwr */ + u32 hs_rate; /* rate A/B to work in HS */ + u32 desired_working_mode; +}; + +static int ufs_qcom_get_pwr_dev_param(struct ufs_qcom_dev_params *qcom_param, + struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr) +{ + int min_qcom_gear; + int min_dev_gear; + bool is_dev_sup_hs = false; + bool is_qcom_max_hs = false; + + if (dev_max->pwr_rx == FAST_MODE) + is_dev_sup_hs = true; + + if (qcom_param->desired_working_mode == FAST) { + is_qcom_max_hs = true; + min_qcom_gear = min_t(u32, qcom_param->hs_rx_gear, + qcom_param->hs_tx_gear); + } else { + min_qcom_gear = min_t(u32, qcom_param->pwm_rx_gear, + qcom_param->pwm_tx_gear); + } + + /* + * device doesn't support HS but qcom_param->desired_working_mode is + * HS, thus device and qcom_param don't agree + */ + if (!is_dev_sup_hs && is_qcom_max_hs) { + pr_err("%s: failed to agree on power mode (device doesn't support HS but requested power is HS)\n", + __func__); + return -ENOTSUPP; + } else if (is_dev_sup_hs && is_qcom_max_hs) { + /* + * since device supports HS, it supports FAST_MODE. + * since qcom_param->desired_working_mode is also HS + * then final decision (FAST/FASTAUTO) is done according + * to qcom_params as it is the restricting factor + */ + agreed_pwr->pwr_rx = agreed_pwr->pwr_tx = + qcom_param->rx_pwr_hs; + } else { + /* + * here qcom_param->desired_working_mode is PWM. + * it doesn't matter whether device supports HS or PWM, + * in both cases qcom_param->desired_working_mode will + * determine the mode + */ + agreed_pwr->pwr_rx = agreed_pwr->pwr_tx = + qcom_param->rx_pwr_pwm; + } + + /* + * we would like tx to work in the minimum number of lanes + * between device capability and vendor preferences. + * the same decision will be made for rx + */ + agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, + qcom_param->tx_lanes); + agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, + qcom_param->rx_lanes); + + /* device maximum gear is the minimum between device rx and tx gears */ + min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); + + /* + * if both device capabilities and vendor pre-defined preferences are + * both HS or both PWM then set the minimum gear to be the chosen + * working gear. + * if one is PWM and one is HS then the one that is PWM get to decide + * what is the gear, as it is the one that also decided previously what + * pwr the device will be configured to. + */ + if ((is_dev_sup_hs && is_qcom_max_hs) || + (!is_dev_sup_hs && !is_qcom_max_hs)) + agreed_pwr->gear_rx = agreed_pwr->gear_tx = + min_t(u32, min_dev_gear, min_qcom_gear); + else if (!is_dev_sup_hs) + agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_dev_gear; + else + agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_qcom_gear; + + agreed_pwr->hs_rate = qcom_param->hs_rate; + return 0; +} + +static int ufs_qcom_update_bus_bw_vote(struct ufs_qcom_host *host) +{ + int vote; + int err = 0; + char mode[BUS_VECTOR_NAME_LEN]; + + ufs_qcom_get_speed_mode(&host->dev_req_params, mode); + + vote = ufs_qcom_get_bus_vote(host, mode); + if (vote >= 0) + err = ufs_qcom_set_bus_vote(host, vote); + else + err = vote; + + if (err) + dev_err(host->hba->dev, "%s: failed %d\n", __func__, err); + else + host->bus_vote.saved_vote = vote; + return err; +} + +static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, + bool status, + struct ufs_pa_layer_attr *dev_max_params, + struct ufs_pa_layer_attr *dev_req_params) +{ + u32 val; + struct ufs_qcom_host *host = hba->priv; + struct phy *phy = host->generic_phy; + struct ufs_qcom_dev_params ufs_qcom_cap; + int ret = 0; + int res = 0; + + if (!dev_req_params) { + pr_err("%s: incoming dev_req_params is NULL\n", __func__); + ret = -EINVAL; + goto out; + } + + switch (status) { + case PRE_CHANGE: + ufs_qcom_cap.tx_lanes = UFS_QCOM_LIMIT_NUM_LANES_TX; + ufs_qcom_cap.rx_lanes = UFS_QCOM_LIMIT_NUM_LANES_RX; + ufs_qcom_cap.hs_rx_gear = UFS_QCOM_LIMIT_HSGEAR_RX; + ufs_qcom_cap.hs_tx_gear = UFS_QCOM_LIMIT_HSGEAR_TX; + ufs_qcom_cap.pwm_rx_gear = UFS_QCOM_LIMIT_PWMGEAR_RX; + ufs_qcom_cap.pwm_tx_gear = UFS_QCOM_LIMIT_PWMGEAR_TX; + ufs_qcom_cap.rx_pwr_pwm = UFS_QCOM_LIMIT_RX_PWR_PWM; + ufs_qcom_cap.tx_pwr_pwm = UFS_QCOM_LIMIT_TX_PWR_PWM; + ufs_qcom_cap.rx_pwr_hs = UFS_QCOM_LIMIT_RX_PWR_HS; + ufs_qcom_cap.tx_pwr_hs = UFS_QCOM_LIMIT_TX_PWR_HS; + ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; + ufs_qcom_cap.desired_working_mode = + UFS_QCOM_LIMIT_DESIRED_MODE; + + ret = ufs_qcom_get_pwr_dev_param(&ufs_qcom_cap, + dev_max_params, + dev_req_params); + if (ret) { + pr_err("%s: failed to determine capabilities\n", + __func__); + goto out; + } + + break; + case POST_CHANGE: + if (!ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, + dev_req_params->pwr_rx, + dev_req_params->hs_rate)) { + dev_err(hba->dev, "%s: ufs_qcom_cfg_timers() failed\n", + __func__); + /* + * we return error code at the end of the routine, + * but continue to configure UFS_PHY_TX_LANE_ENABLE + * and bus voting as usual + */ + ret = -EINVAL; + } + + val = ~(MAX_U32 << dev_req_params->lane_tx); + res = ufs_qcom_phy_set_tx_lane_enable(phy, val); + if (res) { + dev_err(hba->dev, "%s: ufs_qcom_phy_set_tx_lane_enable() failed res = %d\n", + __func__, res); + ret = res; + } + + /* cache the power mode parameters to use internally */ + memcpy(&host->dev_req_params, + dev_req_params, sizeof(*dev_req_params)); + ufs_qcom_update_bus_bw_vote(host); + break; + default: + ret = -EINVAL; + break; + } +out: + return ret; +} + +/** + * ufs_qcom_advertise_quirks - advertise the known QCOM UFS controller quirks + * @hba: host controller instance + * + * QCOM UFS host controller might have some non standard behaviours (quirks) + * than what is specified by UFSHCI specification. Advertise all such + * quirks to standard UFS host controller driver so standard takes them into + * account. + */ +static void ufs_qcom_advertise_quirks(struct ufs_hba *hba) +{ + u8 major; + u16 minor, step; + + ufs_qcom_get_controller_revision(hba, &major, &minor, &step); + + /* + * TBD + * here we should be advertising controller quirks according to + * controller version. + */ +} + +static int ufs_qcom_get_bus_vote(struct ufs_qcom_host *host, + const char *speed_mode) +{ + struct device *dev = host->hba->dev; + struct device_node *np = dev->of_node; + int err; + const char *key = "qcom,bus-vector-names"; + + if (!speed_mode) { + err = -EINVAL; + goto out; + } + + if (host->bus_vote.is_max_bw_needed && !!strcmp(speed_mode, "MIN")) + err = of_property_match_string(np, key, "MAX"); + else + err = of_property_match_string(np, key, speed_mode); + +out: + if (err < 0) + dev_err(dev, "%s: Invalid %s mode %d\n", + __func__, speed_mode, err); + return err; +} + +static int ufs_qcom_set_bus_vote(struct ufs_qcom_host *host, int vote) +{ + int err = 0; + + if (vote != host->bus_vote.curr_vote) + host->bus_vote.curr_vote = vote; + + return err; +} + +static void ufs_qcom_get_speed_mode(struct ufs_pa_layer_attr *p, char *result) +{ + int gear = max_t(u32, p->gear_rx, p->gear_tx); + int lanes = max_t(u32, p->lane_rx, p->lane_tx); + int pwr; + + /* default to PWM Gear 1, Lane 1 if power mode is not initialized */ + if (!gear) + gear = 1; + + if (!lanes) + lanes = 1; + + if (!p->pwr_rx && !p->pwr_tx) { + pwr = SLOWAUTO_MODE; + snprintf(result, BUS_VECTOR_NAME_LEN, "MIN"); + } else if (p->pwr_rx == FAST_MODE || p->pwr_rx == FASTAUTO_MODE || + p->pwr_tx == FAST_MODE || p->pwr_tx == FASTAUTO_MODE) { + pwr = FAST_MODE; + snprintf(result, BUS_VECTOR_NAME_LEN, "%s_R%s_G%d_L%d", "HS", + p->hs_rate == PA_HS_MODE_B ? "B" : "A", gear, lanes); + } else { + pwr = SLOW_MODE; + snprintf(result, BUS_VECTOR_NAME_LEN, "%s_G%d_L%d", + "PWM", gear, lanes); + } +} + +static int ufs_qcom_setup_clocks(struct ufs_hba *hba, bool on) +{ + struct ufs_qcom_host *host = hba->priv; + int err = 0; + int vote = 0; + + /* + * In case ufs_qcom_init() is not yet done, simply ignore. + * This ufs_qcom_setup_clocks() shall be called from + * ufs_qcom_init() after init is done. + */ + if (!host) + return 0; + + if (on) { + err = ufs_qcom_phy_enable_iface_clk(host->generic_phy); + if (err) + goto out; + + err = ufs_qcom_phy_enable_ref_clk(host->generic_phy); + if (err) { + dev_err(hba->dev, "%s enable phy ref clock failed, err=%d\n", + __func__, err); + ufs_qcom_phy_disable_iface_clk(host->generic_phy); + goto out; + } + /* enable the device ref clock */ + ufs_qcom_phy_enable_dev_ref_clk(host->generic_phy); + vote = host->bus_vote.saved_vote; + if (vote == host->bus_vote.min_bw_vote) + ufs_qcom_update_bus_bw_vote(host); + } else { + /* M-PHY RMMI interface clocks can be turned off */ + ufs_qcom_phy_disable_iface_clk(host->generic_phy); + if (!ufs_qcom_is_link_active(hba)) { + /* turn off UFS local PHY ref_clk */ + ufs_qcom_phy_disable_ref_clk(host->generic_phy); + /* disable device ref_clk */ + ufs_qcom_phy_disable_dev_ref_clk(host->generic_phy); + } + vote = host->bus_vote.min_bw_vote; + } + + err = ufs_qcom_set_bus_vote(host, vote); + if (err) + dev_err(hba->dev, "%s: set bus vote failed %d\n", + __func__, err); + +out: + return err; +} + +static ssize_t +show_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + struct ufs_qcom_host *host = hba->priv; + + return snprintf(buf, PAGE_SIZE, "%u\n", + host->bus_vote.is_max_bw_needed); +} + +static ssize_t +store_ufs_to_mem_max_bus_bw(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + struct ufs_qcom_host *host = hba->priv; + uint32_t value; + + if (!kstrtou32(buf, 0, &value)) { + host->bus_vote.is_max_bw_needed = !!value; + ufs_qcom_update_bus_bw_vote(host); + } + + return count; +} + +static int ufs_qcom_bus_register(struct ufs_qcom_host *host) +{ + int err; + struct device *dev = host->hba->dev; + struct device_node *np = dev->of_node; + + err = of_property_count_strings(np, "qcom,bus-vector-names"); + if (err < 0 ) { + dev_err(dev, "%s: qcom,bus-vector-names not specified correctly %d\n", + __func__, err); + goto out; + } + + /* cache the vote index for minimum and maximum bandwidth */ + host->bus_vote.min_bw_vote = ufs_qcom_get_bus_vote(host, "MIN"); + host->bus_vote.max_bw_vote = ufs_qcom_get_bus_vote(host, "MAX"); + + host->bus_vote.max_bus_bw.show = show_ufs_to_mem_max_bus_bw; + host->bus_vote.max_bus_bw.store = store_ufs_to_mem_max_bus_bw; + sysfs_attr_init(&host->bus_vote.max_bus_bw.attr); + host->bus_vote.max_bus_bw.attr.name = "max_bus_bw"; + host->bus_vote.max_bus_bw.attr.mode = S_IRUGO | S_IWUSR; + err = device_create_file(dev, &host->bus_vote.max_bus_bw); +out: + return err; +} + +#define ANDROID_BOOT_DEV_MAX 30 +static char android_boot_dev[ANDROID_BOOT_DEV_MAX]; +static int get_android_boot_dev(char *str) +{ + strlcpy(android_boot_dev, str, ANDROID_BOOT_DEV_MAX); + return 1; +} +__setup("androidboot.bootdevice=", get_android_boot_dev); + +/** + * ufs_qcom_init - bind phy with controller + * @hba: host controller instance + * + * Binds PHY with controller and powers up PHY enabling clocks + * and regulators. + * + * Returns -EPROBE_DEFER if binding fails, returns negative error + * on phy power up failure and returns zero on success. + */ +static int ufs_qcom_init(struct ufs_hba *hba) +{ + int err; + struct device *dev = hba->dev; + struct ufs_qcom_host *host; + + if (strlen(android_boot_dev) && strcmp(android_boot_dev, dev_name(dev))) + return -ENODEV; + + host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL); + if (!host) { + err = -ENOMEM; + dev_err(dev, "%s: no memory for qcom ufs host\n", __func__); + goto out; + } + + host->hba = hba; + hba->priv = (void *)host; + + host->generic_phy = devm_phy_get(dev, "ufsphy"); + + if (IS_ERR(host->generic_phy)) { + err = PTR_ERR(host->generic_phy); + dev_err(dev, "%s: PHY get failed %d\n", __func__, err); + goto out; + } + + err = ufs_qcom_bus_register(host); + if (err) + goto out_host_free; + + phy_init(host->generic_phy); + err = phy_power_on(host->generic_phy); + if (err) + goto out_unregister_bus; + + err = ufs_qcom_init_lane_clks(host); + if (err) + goto out_disable_phy; + + ufs_qcom_advertise_quirks(hba); + + hba->caps |= UFSHCD_CAP_CLK_GATING | UFSHCD_CAP_CLK_SCALING; + hba->caps |= UFSHCD_CAP_AUTO_BKOPS_SUSPEND; + + ufs_qcom_setup_clocks(hba, true); + + if (hba->dev->id < MAX_UFS_QCOM_HOSTS) + ufs_qcom_hosts[hba->dev->id] = host; + + goto out; + +out_disable_phy: + phy_power_off(host->generic_phy); +out_unregister_bus: + phy_exit(host->generic_phy); +out_host_free: + devm_kfree(dev, host); + hba->priv = NULL; +out: + return err; +} + +static void ufs_qcom_exit(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = hba->priv; + + ufs_qcom_disable_lane_clks(host); + phy_power_off(host->generic_phy); +} + +static +void ufs_qcom_clk_scale_notify(struct ufs_hba *hba) +{ + struct ufs_qcom_host *host = hba->priv; + struct ufs_pa_layer_attr *dev_req_params = &host->dev_req_params; + + if (!dev_req_params) + return; + + ufs_qcom_cfg_timers(hba, dev_req_params->gear_rx, + dev_req_params->pwr_rx, + dev_req_params->hs_rate); +} + +/** + * struct ufs_hba_qcom_vops - UFS QCOM specific variant operations + * + * The variant operations configure the necessary controller and PHY + * handshake during initialization. + */ +static const struct ufs_hba_variant_ops ufs_hba_qcom_vops = { + .name = "qcom", + .init = ufs_qcom_init, + .exit = ufs_qcom_exit, + .clk_scale_notify = ufs_qcom_clk_scale_notify, + .setup_clocks = ufs_qcom_setup_clocks, + .hce_enable_notify = ufs_qcom_hce_enable_notify, + .link_startup_notify = ufs_qcom_link_startup_notify, + .pwr_change_notify = ufs_qcom_pwr_change_notify, + .suspend = ufs_qcom_suspend, + .resume = ufs_qcom_resume, +}; +EXPORT_SYMBOL(ufs_hba_qcom_vops); |