diff options
Diffstat (limited to 'drivers/scsi')
| -rw-r--r-- | drivers/scsi/arm/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/scsi/arm/scsi.h | 2 | ||||
| -rw-r--r-- | drivers/scsi/ata_piix.c | 5 | ||||
| -rw-r--r-- | drivers/scsi/libata-core.c | 34 | ||||
| -rw-r--r-- | drivers/scsi/libata-scsi.c | 13 | ||||
| -rw-r--r-- | drivers/scsi/sata_sil24.c | 1 |
6 files changed, 28 insertions, 30 deletions
diff --git a/drivers/scsi/arm/Kconfig b/drivers/scsi/arm/Kconfig index 06d7601cdf56..d006a8cb4a74 100644 --- a/drivers/scsi/arm/Kconfig +++ b/drivers/scsi/arm/Kconfig @@ -69,6 +69,7 @@ comment "The following drivers are not fully supported" config SCSI_CUMANA_1 tristate "CumanaSCSI I support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && SCSI + select SCSI_SPI_ATTRS help This enables support for the Cumana SCSI I card. If you have an Acorn system with one of these, say Y. If unsure, say N. @@ -76,6 +77,7 @@ config SCSI_CUMANA_1 config SCSI_ECOSCSI tristate "EcoScsi support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && (ARCH_ARC || ARCH_A5K) && SCSI + select SCSI_SPI_ATTRS help This enables support for the EcoSCSI card -- a small card that sits in the Econet socket. If you have an Acorn system with one of these, @@ -84,6 +86,7 @@ config SCSI_ECOSCSI config SCSI_OAK1 tristate "Oak SCSI support (EXPERIMENTAL)" depends on ARCH_ACORN && EXPERIMENTAL && SCSI + select SCSI_SPI_ATTRS help This enables support for the Oak SCSI card. If you have an Acorn system with one of these, say Y. If unsure, say N. diff --git a/drivers/scsi/arm/scsi.h b/drivers/scsi/arm/scsi.h index 6dd544a5eb56..8c2600ffc6af 100644 --- a/drivers/scsi/arm/scsi.h +++ b/drivers/scsi/arm/scsi.h @@ -74,7 +74,7 @@ static inline void init_SCp(Scsi_Cmnd *SCpnt) unsigned long len = 0; int buf; - SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->buffer; + SCpnt->SCp.buffer = (struct scatterlist *) SCpnt->request_buffer; SCpnt->SCp.buffers_residual = SCpnt->use_sg - 1; SCpnt->SCp.ptr = (char *) (page_address(SCpnt->SCp.buffer->page) + diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c index 19745a31072b..5e8afc876980 100644 --- a/drivers/scsi/ata_piix.c +++ b/drivers/scsi/ata_piix.c @@ -567,8 +567,8 @@ static int piix_sata_prereset(struct ata_port *ap) present = 1; } - DPRINTK("ata%u: LEAVE, pcs=0x%x present_mask=0x%x\n", - ap->id, pcs, present_mask); + DPRINTK("ata%u: LEAVE, pcs=0x%x present=0x%x\n", + ap->id, pcs, present); if (!present) { ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n"); @@ -828,6 +828,7 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, case IDE: WARN_ON((i & 1) || map[i + 1] != IDE); pinfo[i / 2] = piix_port_info[ich5_pata]; + pinfo[i / 2].private_data = hpriv; i++; printk(" IDE IDE"); break; diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c index 386e5f21e191..16fc2dd8f2f7 100644 --- a/drivers/scsi/libata-core.c +++ b/drivers/scsi/libata-core.c @@ -5185,28 +5185,6 @@ void ata_host_stop (struct ata_host_set *host_set) iounmap(host_set->mmio_base); } - -/** - * ata_host_remove - Unregister SCSI host structure with upper layers - * @ap: Port to unregister - * @do_unregister: 1 if we fully unregister, 0 to just stop the port - * - * LOCKING: - * Inherited from caller. - */ - -static void ata_host_remove(struct ata_port *ap, unsigned int do_unregister) -{ - struct Scsi_Host *sh = ap->host; - - DPRINTK("ENTER\n"); - - if (do_unregister) - scsi_remove_host(sh); - - ap->ops->port_stop(ap); -} - /** * ata_dev_init - Initialize an ata_device structure * @dev: Device structure to initialize @@ -5532,8 +5510,11 @@ int ata_device_add(const struct ata_probe_ent *ent) err_out: for (i = 0; i < count; i++) { - ata_host_remove(host_set->ports[i], 1); - scsi_host_put(host_set->ports[i]->host); + struct ata_port *ap = host_set->ports[i]; + if (ap) { + ap->ops->port_stop(ap); + scsi_host_put(ap->host); + } } err_free_ret: kfree(host_set); @@ -5558,7 +5539,7 @@ void ata_port_detach(struct ata_port *ap) int i; if (!ap->ops->error_handler) - return; + goto skip_eh; /* tell EH we're leaving & flush EH */ spin_lock_irqsave(ap->lock, flags); @@ -5594,6 +5575,7 @@ void ata_port_detach(struct ata_port *ap) cancel_delayed_work(&ap->hotplug_task); flush_workqueue(ata_aux_wq); + skip_eh: /* remove the associated SCSI host */ scsi_remove_host(ap->host); } @@ -5662,7 +5644,7 @@ int ata_scsi_release(struct Scsi_Host *host) DPRINTK("ENTER\n"); ap->ops->port_disable(ap); - ata_host_remove(ap, 0); + ap->ops->port_stop(ap); DPRINTK("EXIT\n"); return 1; diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c index 7ced41ecde86..e92c31d698ff 100644 --- a/drivers/scsi/libata-scsi.c +++ b/drivers/scsi/libata-scsi.c @@ -2353,6 +2353,19 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc) ata_gen_ata_desc_sense(qc); } + /* SCSI EH automatically locks door if sdev->locked is + * set. Sometimes door lock request continues to + * fail, for example, when no media is present. This + * creates a loop - SCSI EH issues door lock which + * fails and gets invoked again to acquire sense data + * for the failed command. + * + * If door lock fails, always clear sdev->locked to + * avoid this infinite loop. + */ + if (qc->cdb[0] == ALLOW_MEDIUM_REMOVAL) + qc->dev->sdev->locked = 0; + qc->scsicmd->result = SAM_STAT_CHECK_CONDITION; qc->scsidone(cmd); ata_qc_free(qc); diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c index 2e0f4a4076af..3f368c7d3ef9 100644 --- a/drivers/scsi/sata_sil24.c +++ b/drivers/scsi/sata_sil24.c @@ -1106,7 +1106,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) probe_ent->irq = pdev->irq; probe_ent->irq_flags = IRQF_SHARED; - probe_ent->mmio_base = port_base; probe_ent->private_data = hpriv; hpriv->host_base = host_base; |