diff options
Diffstat (limited to 'drivers/serial/altera_uart.c')
| -rw-r--r-- | drivers/serial/altera_uart.c | 608 |
1 files changed, 0 insertions, 608 deletions
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c deleted file mode 100644 index 721216292a50..000000000000 --- a/drivers/serial/altera_uart.c +++ /dev/null @@ -1,608 +0,0 @@ -/* - * altera_uart.c -- Altera UART driver - * - * Based on mcf.c -- Freescale ColdFire UART driver - * - * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com> - * (C) Copyright 2008, Thomas Chou <thomas@wytron.com.tw> - * (C) Copyright 2010, Tobias Klauser <tklauser@distanz.ch> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/timer.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <linux/console.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/platform_device.h> -#include <linux/io.h> -#include <linux/altera_uart.h> - -#define DRV_NAME "altera_uart" -#define SERIAL_ALTERA_MAJOR 204 -#define SERIAL_ALTERA_MINOR 213 - -/* - * Altera UART register definitions according to the Nios UART datasheet: - * http://www.altera.com/literature/ds/ds_nios_uart.pdf - */ - -#define ALTERA_UART_SIZE 32 - -#define ALTERA_UART_RXDATA_REG 0 -#define ALTERA_UART_TXDATA_REG 4 -#define ALTERA_UART_STATUS_REG 8 -#define ALTERA_UART_CONTROL_REG 12 -#define ALTERA_UART_DIVISOR_REG 16 -#define ALTERA_UART_EOP_REG 20 - -#define ALTERA_UART_STATUS_PE_MSK 0x0001 /* parity error */ -#define ALTERA_UART_STATUS_FE_MSK 0x0002 /* framing error */ -#define ALTERA_UART_STATUS_BRK_MSK 0x0004 /* break */ -#define ALTERA_UART_STATUS_ROE_MSK 0x0008 /* RX overrun error */ -#define ALTERA_UART_STATUS_TOE_MSK 0x0010 /* TX overrun error */ -#define ALTERA_UART_STATUS_TMT_MSK 0x0020 /* TX shift register state */ -#define ALTERA_UART_STATUS_TRDY_MSK 0x0040 /* TX ready */ -#define ALTERA_UART_STATUS_RRDY_MSK 0x0080 /* RX ready */ -#define ALTERA_UART_STATUS_E_MSK 0x0100 /* exception condition */ -#define ALTERA_UART_STATUS_DCTS_MSK 0x0400 /* CTS logic-level change */ -#define ALTERA_UART_STATUS_CTS_MSK 0x0800 /* CTS logic state */ -#define ALTERA_UART_STATUS_EOP_MSK 0x1000 /* EOP written/read */ - - /* Enable interrupt on... */ -#define ALTERA_UART_CONTROL_PE_MSK 0x0001 /* ...parity error */ -#define ALTERA_UART_CONTROL_FE_MSK 0x0002 /* ...framing error */ -#define ALTERA_UART_CONTROL_BRK_MSK 0x0004 /* ...break */ -#define ALTERA_UART_CONTROL_ROE_MSK 0x0008 /* ...RX overrun */ -#define ALTERA_UART_CONTROL_TOE_MSK 0x0010 /* ...TX overrun */ -#define ALTERA_UART_CONTROL_TMT_MSK 0x0020 /* ...TX shift register empty */ -#define ALTERA_UART_CONTROL_TRDY_MSK 0x0040 /* ...TX ready */ -#define ALTERA_UART_CONTROL_RRDY_MSK 0x0080 /* ...RX ready */ -#define ALTERA_UART_CONTROL_E_MSK 0x0100 /* ...exception*/ - -#define ALTERA_UART_CONTROL_TRBK_MSK 0x0200 /* TX break */ -#define ALTERA_UART_CONTROL_DCTS_MSK 0x0400 /* Interrupt on CTS change */ -#define ALTERA_UART_CONTROL_RTS_MSK 0x0800 /* RTS signal */ -#define ALTERA_UART_CONTROL_EOP_MSK 0x1000 /* Interrupt on EOP */ - -/* - * Local per-uart structure. - */ -struct altera_uart { - struct uart_port port; - struct timer_list tmr; - unsigned int sigs; /* Local copy of line sigs */ - unsigned short imr; /* Local IMR mirror */ -}; - -static u32 altera_uart_readl(struct uart_port *port, int reg) -{ - struct altera_uart_platform_uart *platp = port->private_data; - - return readl(port->membase + (reg << platp->bus_shift)); -} - -static void altera_uart_writel(struct uart_port *port, u32 dat, int reg) -{ - struct altera_uart_platform_uart *platp = port->private_data; - - writel(dat, port->membase + (reg << platp->bus_shift)); -} - -static unsigned int altera_uart_tx_empty(struct uart_port *port) -{ - return (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TMT_MSK) ? TIOCSER_TEMT : 0; -} - -static unsigned int altera_uart_get_mctrl(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned int sigs; - - sigs = (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_CTS_MSK) ? TIOCM_CTS : 0; - sigs |= (pp->sigs & TIOCM_RTS); - - return sigs; -} - -static void altera_uart_set_mctrl(struct uart_port *port, unsigned int sigs) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->sigs = sigs; - if (sigs & TIOCM_RTS) - pp->imr |= ALTERA_UART_CONTROL_RTS_MSK; - else - pp->imr &= ~ALTERA_UART_CONTROL_RTS_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_start_tx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr |= ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_stop_tx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_stop_rx(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - pp->imr &= ~ALTERA_UART_CONTROL_RRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); -} - -static void altera_uart_break_ctl(struct uart_port *port, int break_state) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - if (break_state == -1) - pp->imr |= ALTERA_UART_CONTROL_TRBK_MSK; - else - pp->imr &= ~ALTERA_UART_CONTROL_TRBK_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void altera_uart_enable_ms(struct uart_port *port) -{ -} - -static void altera_uart_set_termios(struct uart_port *port, - struct ktermios *termios, - struct ktermios *old) -{ - unsigned long flags; - unsigned int baud, baudclk; - - baud = uart_get_baud_rate(port, termios, old, 0, 4000000); - baudclk = port->uartclk / baud; - - if (old) - tty_termios_copy_hw(termios, old); - tty_termios_encode_baud_rate(termios, baud, baud); - - spin_lock_irqsave(&port->lock, flags); - uart_update_timeout(port, termios->c_cflag, baud); - altera_uart_writel(port, baudclk, ALTERA_UART_DIVISOR_REG); - spin_unlock_irqrestore(&port->lock, flags); -} - -static void altera_uart_rx_chars(struct altera_uart *pp) -{ - struct uart_port *port = &pp->port; - unsigned char ch, flag; - unsigned short status; - - while ((status = altera_uart_readl(port, ALTERA_UART_STATUS_REG)) & - ALTERA_UART_STATUS_RRDY_MSK) { - ch = altera_uart_readl(port, ALTERA_UART_RXDATA_REG); - flag = TTY_NORMAL; - port->icount.rx++; - - if (status & ALTERA_UART_STATUS_E_MSK) { - altera_uart_writel(port, status, - ALTERA_UART_STATUS_REG); - - if (status & ALTERA_UART_STATUS_BRK_MSK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } else if (status & ALTERA_UART_STATUS_PE_MSK) { - port->icount.parity++; - } else if (status & ALTERA_UART_STATUS_ROE_MSK) { - port->icount.overrun++; - } else if (status & ALTERA_UART_STATUS_FE_MSK) { - port->icount.frame++; - } - - status &= port->read_status_mask; - - if (status & ALTERA_UART_STATUS_BRK_MSK) - flag = TTY_BREAK; - else if (status & ALTERA_UART_STATUS_PE_MSK) - flag = TTY_PARITY; - else if (status & ALTERA_UART_STATUS_FE_MSK) - flag = TTY_FRAME; - } - - if (uart_handle_sysrq_char(port, ch)) - continue; - uart_insert_char(port, status, ALTERA_UART_STATUS_ROE_MSK, ch, - flag); - } - - tty_flip_buffer_push(port->state->port.tty); -} - -static void altera_uart_tx_chars(struct altera_uart *pp) -{ - struct uart_port *port = &pp->port; - struct circ_buf *xmit = &port->state->xmit; - - if (port->x_char) { - /* Send special char - probably flow control */ - altera_uart_writel(port, port->x_char, ALTERA_UART_TXDATA_REG); - port->x_char = 0; - port->icount.tx++; - return; - } - - while (altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TRDY_MSK) { - if (xmit->head == xmit->tail) - break; - altera_uart_writel(port, xmit->buf[xmit->tail], - ALTERA_UART_TXDATA_REG); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (xmit->head == xmit->tail) { - pp->imr &= ~ALTERA_UART_CONTROL_TRDY_MSK; - altera_uart_writel(port, pp->imr, ALTERA_UART_CONTROL_REG); - } -} - -static irqreturn_t altera_uart_interrupt(int irq, void *data) -{ - struct uart_port *port = data; - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned int isr; - - isr = altera_uart_readl(port, ALTERA_UART_STATUS_REG) & pp->imr; - - spin_lock(&port->lock); - if (isr & ALTERA_UART_STATUS_RRDY_MSK) - altera_uart_rx_chars(pp); - if (isr & ALTERA_UART_STATUS_TRDY_MSK) - altera_uart_tx_chars(pp); - spin_unlock(&port->lock); - - return IRQ_RETVAL(isr); -} - -static void altera_uart_timer(unsigned long data) -{ - struct uart_port *port = (void *)data; - struct altera_uart *pp = container_of(port, struct altera_uart, port); - - altera_uart_interrupt(0, port); - mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); -} - -static void altera_uart_config_port(struct uart_port *port, int flags) -{ - port->type = PORT_ALTERA_UART; - - /* Clear mask, so no surprise interrupts. */ - altera_uart_writel(port, 0, ALTERA_UART_CONTROL_REG); - /* Clear status register */ - altera_uart_writel(port, 0, ALTERA_UART_STATUS_REG); -} - -static int altera_uart_startup(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - int ret; - - if (!port->irq) { - setup_timer(&pp->tmr, altera_uart_timer, (unsigned long)port); - mod_timer(&pp->tmr, jiffies + uart_poll_timeout(port)); - return 0; - } - - ret = request_irq(port->irq, altera_uart_interrupt, IRQF_DISABLED, - DRV_NAME, port); - if (ret) { - pr_err(DRV_NAME ": unable to attach Altera UART %d " - "interrupt vector=%d\n", port->line, port->irq); - return ret; - } - - spin_lock_irqsave(&port->lock, flags); - - /* Enable RX interrupts now */ - pp->imr = ALTERA_UART_CONTROL_RRDY_MSK; - writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - return 0; -} - -static void altera_uart_shutdown(struct uart_port *port) -{ - struct altera_uart *pp = container_of(port, struct altera_uart, port); - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* Disable all interrupts now */ - pp->imr = 0; - writel(pp->imr, port->membase + ALTERA_UART_CONTROL_REG); - - spin_unlock_irqrestore(&port->lock, flags); - - if (port->irq) - free_irq(port->irq, port); - else - del_timer_sync(&pp->tmr); -} - -static const char *altera_uart_type(struct uart_port *port) -{ - return (port->type == PORT_ALTERA_UART) ? "Altera UART" : NULL; -} - -static int altera_uart_request_port(struct uart_port *port) -{ - /* UARTs always present */ - return 0; -} - -static void altera_uart_release_port(struct uart_port *port) -{ - /* Nothing to release... */ -} - -static int altera_uart_verify_port(struct uart_port *port, - struct serial_struct *ser) -{ - if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_ALTERA_UART)) - return -EINVAL; - return 0; -} - -/* - * Define the basic serial functions we support. - */ -static struct uart_ops altera_uart_ops = { - .tx_empty = altera_uart_tx_empty, - .get_mctrl = altera_uart_get_mctrl, - .set_mctrl = altera_uart_set_mctrl, - .start_tx = altera_uart_start_tx, - .stop_tx = altera_uart_stop_tx, - .stop_rx = altera_uart_stop_rx, - .enable_ms = altera_uart_enable_ms, - .break_ctl = altera_uart_break_ctl, - .startup = altera_uart_startup, - .shutdown = altera_uart_shutdown, - .set_termios = altera_uart_set_termios, - .type = altera_uart_type, - .request_port = altera_uart_request_port, - .release_port = altera_uart_release_port, - .config_port = altera_uart_config_port, - .verify_port = altera_uart_verify_port, -}; - -static struct altera_uart altera_uart_ports[CONFIG_SERIAL_ALTERA_UART_MAXPORTS]; - -#if defined(CONFIG_SERIAL_ALTERA_UART_CONSOLE) - -int __init early_altera_uart_setup(struct altera_uart_platform_uart *platp) -{ - struct uart_port *port; - int i; - - for (i = 0; i < CONFIG_SERIAL_ALTERA_UART_MAXPORTS && platp[i].mapbase; i++) { - port = &altera_uart_ports[i].port; - - port->line = i; - port->type = PORT_ALTERA_UART; - port->mapbase = platp[i].mapbase; - port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); - port->iotype = SERIAL_IO_MEM; - port->irq = platp[i].irq; - port->uartclk = platp[i].uartclk; - port->flags = UPF_BOOT_AUTOCONF; - port->ops = &altera_uart_ops; - port->private_data = platp; - } - - return 0; -} - -static void altera_uart_console_putc(struct uart_port *port, const char c) -{ - while (!(altera_uart_readl(port, ALTERA_UART_STATUS_REG) & - ALTERA_UART_STATUS_TRDY_MSK)) - cpu_relax(); - - writel(c, port->membase + ALTERA_UART_TXDATA_REG); -} - -static void altera_uart_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port = &(altera_uart_ports + co->index)->port; - - for (; count; count--, s++) { - altera_uart_console_putc(port, *s); - if (*s == '\n') - altera_uart_console_putc(port, '\r'); - } -} - -static int __init altera_uart_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = CONFIG_SERIAL_ALTERA_UART_BAUDRATE; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) - return -EINVAL; - port = &altera_uart_ports[co->index].port; - if (!port->membase) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver altera_uart_driver; - -static struct console altera_uart_console = { - .name = "ttyAL", - .write = altera_uart_console_write, - .device = uart_console_device, - .setup = altera_uart_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &altera_uart_driver, -}; - -static int __init altera_uart_console_init(void) -{ - register_console(&altera_uart_console); - return 0; -} - -console_initcall(altera_uart_console_init); - -#define ALTERA_UART_CONSOLE (&altera_uart_console) - -#else - -#define ALTERA_UART_CONSOLE NULL - -#endif /* CONFIG_ALTERA_UART_CONSOLE */ - -/* - * Define the altera_uart UART driver structure. - */ -static struct uart_driver altera_uart_driver = { - .owner = THIS_MODULE, - .driver_name = DRV_NAME, - .dev_name = "ttyAL", - .major = SERIAL_ALTERA_MAJOR, - .minor = SERIAL_ALTERA_MINOR, - .nr = CONFIG_SERIAL_ALTERA_UART_MAXPORTS, - .cons = ALTERA_UART_CONSOLE, -}; - -static int __devinit altera_uart_probe(struct platform_device *pdev) -{ - struct altera_uart_platform_uart *platp = pdev->dev.platform_data; - struct uart_port *port; - struct resource *res_mem; - struct resource *res_irq; - int i = pdev->id; - - /* -1 emphasizes that the platform must have one port, no .N suffix */ - if (i == -1) - i = 0; - - if (i >= CONFIG_SERIAL_ALTERA_UART_MAXPORTS) - return -EINVAL; - - port = &altera_uart_ports[i].port; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem) - port->mapbase = res_mem->start; - else if (platp->mapbase) - port->mapbase = platp->mapbase; - else - return -EINVAL; - - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res_irq) - port->irq = res_irq->start; - else if (platp->irq) - port->irq = platp->irq; - - port->membase = ioremap(port->mapbase, ALTERA_UART_SIZE); - if (!port->membase) - return -ENOMEM; - - port->line = i; - port->type = PORT_ALTERA_UART; - port->iotype = SERIAL_IO_MEM; - port->uartclk = platp->uartclk; - port->ops = &altera_uart_ops; - port->flags = UPF_BOOT_AUTOCONF; - port->private_data = platp; - - uart_add_one_port(&altera_uart_driver, port); - - return 0; -} - -static int __devexit altera_uart_remove(struct platform_device *pdev) -{ - struct uart_port *port = &altera_uart_ports[pdev->id].port; - - uart_remove_one_port(&altera_uart_driver, port); - return 0; -} - -static struct platform_driver altera_uart_platform_driver = { - .probe = altera_uart_probe, - .remove = __devexit_p(altera_uart_remove), - .driver = { - .name = DRV_NAME, - .owner = THIS_MODULE, - .pm = NULL, - }, -}; - -static int __init altera_uart_init(void) -{ - int rc; - - rc = uart_register_driver(&altera_uart_driver); - if (rc) - return rc; - rc = platform_driver_register(&altera_uart_platform_driver); - if (rc) { - uart_unregister_driver(&altera_uart_driver); - return rc; - } - return 0; -} - -static void __exit altera_uart_exit(void) -{ - platform_driver_unregister(&altera_uart_platform_driver); - uart_unregister_driver(&altera_uart_driver); -} - -module_init(altera_uart_init); -module_exit(altera_uart_exit); - -MODULE_DESCRIPTION("Altera UART driver"); -MODULE_AUTHOR("Thomas Chou <thomas@wytron.com.tw>"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:" DRV_NAME); -MODULE_ALIAS_CHARDEV_MAJOR(SERIAL_ALTERA_MAJOR); |