diff options
Diffstat (limited to 'drivers/serial/mpsc.h')
| -rw-r--r-- | drivers/serial/mpsc.h | 289 |
1 files changed, 0 insertions, 289 deletions
diff --git a/drivers/serial/mpsc.h b/drivers/serial/mpsc.h deleted file mode 100644 index 678dbcf06c8f..000000000000 --- a/drivers/serial/mpsc.h +++ /dev/null @@ -1,289 +0,0 @@ -/* - * drivers/serial/mpsc.h - * - * Author: Mark A. Greer <mgreer@mvista.com> - * - * 2004 (c) MontaVista, Software, Inc. This file is licensed under - * the terms of the GNU General Public License version 2. This program - * is licensed "as is" without any warranty of any kind, whether express - * or implied. - */ - -#ifndef __MPSC_H__ -#define __MPSC_H__ - -#include <linux/config.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/ioport.h> -#include <linux/init.h> -#include <linux/console.h> -#include <linux/sysrq.h> -#include <linux/serial.h> -#include <linux/serial_core.h> -#include <linux/delay.h> -#include <linux/device.h> -#include <linux/dma-mapping.h> -#include <linux/mv643xx.h> - -#include <asm/io.h> -#include <asm/irq.h> - -#if defined(CONFIG_SERIAL_MPSC_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#define MPSC_NUM_CTLRS 2 - -/* - * Descriptors and buffers must be cache line aligned. - * Buffers lengths must be multiple of cache line size. - * Number of Tx & Rx descriptors must be powers of 2. - */ -#define MPSC_RXR_ENTRIES 32 -#define MPSC_RXRE_SIZE dma_get_cache_alignment() -#define MPSC_RXR_SIZE (MPSC_RXR_ENTRIES * MPSC_RXRE_SIZE) -#define MPSC_RXBE_SIZE dma_get_cache_alignment() -#define MPSC_RXB_SIZE (MPSC_RXR_ENTRIES * MPSC_RXBE_SIZE) - -#define MPSC_TXR_ENTRIES 32 -#define MPSC_TXRE_SIZE dma_get_cache_alignment() -#define MPSC_TXR_SIZE (MPSC_TXR_ENTRIES * MPSC_TXRE_SIZE) -#define MPSC_TXBE_SIZE dma_get_cache_alignment() -#define MPSC_TXB_SIZE (MPSC_TXR_ENTRIES * MPSC_TXBE_SIZE) - -#define MPSC_DMA_ALLOC_SIZE (MPSC_RXR_SIZE + MPSC_RXB_SIZE + \ - MPSC_TXR_SIZE + MPSC_TXB_SIZE + \ - dma_get_cache_alignment() /* for alignment */) - -/* Rx and Tx Ring entry descriptors -- assume entry size is <= cacheline size */ -struct mpsc_rx_desc { - u16 bufsize; - u16 bytecnt; - u32 cmdstat; - u32 link; - u32 buf_ptr; -} __attribute((packed)); - -struct mpsc_tx_desc { - u16 bytecnt; - u16 shadow; - u32 cmdstat; - u32 link; - u32 buf_ptr; -} __attribute((packed)); - -/* - * Some regs that have the erratum that you can't read them are are shared - * between the two MPSC controllers. This struct contains those shared regs. - */ -struct mpsc_shared_regs { - phys_addr_t mpsc_routing_base_p; - phys_addr_t sdma_intr_base_p; - - void __iomem *mpsc_routing_base; - void __iomem *sdma_intr_base; - - u32 MPSC_MRR_m; - u32 MPSC_RCRR_m; - u32 MPSC_TCRR_m; - u32 SDMA_INTR_CAUSE_m; - u32 SDMA_INTR_MASK_m; -}; - -/* The main driver data structure */ -struct mpsc_port_info { - struct uart_port port; /* Overlay uart_port structure */ - - /* Internal driver state for this ctlr */ - u8 ready; - u8 rcv_data; - tcflag_t c_iflag; /* save termios->c_iflag */ - tcflag_t c_cflag; /* save termios->c_cflag */ - - /* Info passed in from platform */ - u8 mirror_regs; /* Need to mirror regs? */ - u8 cache_mgmt; /* Need manual cache mgmt? */ - u8 brg_can_tune; /* BRG has baud tuning? */ - u32 brg_clk_src; - u16 mpsc_max_idle; - int default_baud; - int default_bits; - int default_parity; - int default_flow; - - /* Physical addresses of various blocks of registers (from platform) */ - phys_addr_t mpsc_base_p; - phys_addr_t sdma_base_p; - phys_addr_t brg_base_p; - - /* Virtual addresses of various blocks of registers (from platform) */ - void __iomem *mpsc_base; - void __iomem *sdma_base; - void __iomem *brg_base; - - /* Descriptor ring and buffer allocations */ - void *dma_region; - dma_addr_t dma_region_p; - - dma_addr_t rxr; /* Rx descriptor ring */ - dma_addr_t rxr_p; /* Phys addr of rxr */ - u8 *rxb; /* Rx Ring I/O buf */ - u8 *rxb_p; /* Phys addr of rxb */ - u32 rxr_posn; /* First desc w/ Rx data */ - - dma_addr_t txr; /* Tx descriptor ring */ - dma_addr_t txr_p; /* Phys addr of txr */ - u8 *txb; /* Tx Ring I/O buf */ - u8 *txb_p; /* Phys addr of txb */ - int txr_head; /* Where new data goes */ - int txr_tail; /* Where sent data comes off */ - - /* Mirrored values of regs we can't read (if 'mirror_regs' set) */ - u32 MPSC_MPCR_m; - u32 MPSC_CHR_1_m; - u32 MPSC_CHR_2_m; - u32 MPSC_CHR_10_m; - u32 BRG_BCR_m; - struct mpsc_shared_regs *shared_regs; -}; - -/* Hooks to platform-specific code */ -int mpsc_platform_register_driver(void); -void mpsc_platform_unregister_driver(void); - -/* Hooks back in to mpsc common to be called by platform-specific code */ -struct mpsc_port_info *mpsc_device_probe(int index); -struct mpsc_port_info *mpsc_device_remove(int index); - -/* - ***************************************************************************** - * - * Multi-Protocol Serial Controller Interface Registers - * - ***************************************************************************** - */ - -/* Main Configuratino Register Offsets */ -#define MPSC_MMCRL 0x0000 -#define MPSC_MMCRH 0x0004 -#define MPSC_MPCR 0x0008 -#define MPSC_CHR_1 0x000c -#define MPSC_CHR_2 0x0010 -#define MPSC_CHR_3 0x0014 -#define MPSC_CHR_4 0x0018 -#define MPSC_CHR_5 0x001c -#define MPSC_CHR_6 0x0020 -#define MPSC_CHR_7 0x0024 -#define MPSC_CHR_8 0x0028 -#define MPSC_CHR_9 0x002c -#define MPSC_CHR_10 0x0030 -#define MPSC_CHR_11 0x0034 - -#define MPSC_MPCR_FRZ (1 << 9) -#define MPSC_MPCR_CL_5 0 -#define MPSC_MPCR_CL_6 1 -#define MPSC_MPCR_CL_7 2 -#define MPSC_MPCR_CL_8 3 -#define MPSC_MPCR_SBL_1 0 -#define MPSC_MPCR_SBL_2 1 - -#define MPSC_CHR_2_TEV (1<<1) -#define MPSC_CHR_2_TA (1<<7) -#define MPSC_CHR_2_TTCS (1<<9) -#define MPSC_CHR_2_REV (1<<17) -#define MPSC_CHR_2_RA (1<<23) -#define MPSC_CHR_2_CRD (1<<25) -#define MPSC_CHR_2_EH (1<<31) -#define MPSC_CHR_2_PAR_ODD 0 -#define MPSC_CHR_2_PAR_SPACE 1 -#define MPSC_CHR_2_PAR_EVEN 2 -#define MPSC_CHR_2_PAR_MARK 3 - -/* MPSC Signal Routing */ -#define MPSC_MRR 0x0000 -#define MPSC_RCRR 0x0004 -#define MPSC_TCRR 0x0008 - -/* - ***************************************************************************** - * - * Serial DMA Controller Interface Registers - * - ***************************************************************************** - */ - -#define SDMA_SDC 0x0000 -#define SDMA_SDCM 0x0008 -#define SDMA_RX_DESC 0x0800 -#define SDMA_RX_BUF_PTR 0x0808 -#define SDMA_SCRDP 0x0810 -#define SDMA_TX_DESC 0x0c00 -#define SDMA_SCTDP 0x0c10 -#define SDMA_SFTDP 0x0c14 - -#define SDMA_DESC_CMDSTAT_PE (1<<0) -#define SDMA_DESC_CMDSTAT_CDL (1<<1) -#define SDMA_DESC_CMDSTAT_FR (1<<3) -#define SDMA_DESC_CMDSTAT_OR (1<<6) -#define SDMA_DESC_CMDSTAT_BR (1<<9) -#define SDMA_DESC_CMDSTAT_MI (1<<10) -#define SDMA_DESC_CMDSTAT_A (1<<11) -#define SDMA_DESC_CMDSTAT_AM (1<<12) -#define SDMA_DESC_CMDSTAT_CT (1<<13) -#define SDMA_DESC_CMDSTAT_C (1<<14) -#define SDMA_DESC_CMDSTAT_ES (1<<15) -#define SDMA_DESC_CMDSTAT_L (1<<16) -#define SDMA_DESC_CMDSTAT_F (1<<17) -#define SDMA_DESC_CMDSTAT_P (1<<18) -#define SDMA_DESC_CMDSTAT_EI (1<<23) -#define SDMA_DESC_CMDSTAT_O (1<<31) - -#define SDMA_DESC_DFLT (SDMA_DESC_CMDSTAT_O | \ - SDMA_DESC_CMDSTAT_EI) - -#define SDMA_SDC_RFT (1<<0) -#define SDMA_SDC_SFM (1<<1) -#define SDMA_SDC_BLMR (1<<6) -#define SDMA_SDC_BLMT (1<<7) -#define SDMA_SDC_POVR (1<<8) -#define SDMA_SDC_RIFB (1<<9) - -#define SDMA_SDCM_ERD (1<<7) -#define SDMA_SDCM_AR (1<<15) -#define SDMA_SDCM_STD (1<<16) -#define SDMA_SDCM_TXD (1<<23) -#define SDMA_SDCM_AT (1<<31) - -#define SDMA_0_CAUSE_RXBUF (1<<0) -#define SDMA_0_CAUSE_RXERR (1<<1) -#define SDMA_0_CAUSE_TXBUF (1<<2) -#define SDMA_0_CAUSE_TXEND (1<<3) -#define SDMA_1_CAUSE_RXBUF (1<<8) -#define SDMA_1_CAUSE_RXERR (1<<9) -#define SDMA_1_CAUSE_TXBUF (1<<10) -#define SDMA_1_CAUSE_TXEND (1<<11) - -#define SDMA_CAUSE_RX_MASK (SDMA_0_CAUSE_RXBUF | SDMA_0_CAUSE_RXERR | \ - SDMA_1_CAUSE_RXBUF | SDMA_1_CAUSE_RXERR) -#define SDMA_CAUSE_TX_MASK (SDMA_0_CAUSE_TXBUF | SDMA_0_CAUSE_TXEND | \ - SDMA_1_CAUSE_TXBUF | SDMA_1_CAUSE_TXEND) - -/* SDMA Interrupt registers */ -#define SDMA_INTR_CAUSE 0x0000 -#define SDMA_INTR_MASK 0x0080 - -/* - ***************************************************************************** - * - * Baud Rate Generator Interface Registers - * - ***************************************************************************** - */ - -#define BRG_BCR 0x0000 -#define BRG_BTR 0x0004 - -#endif /* __MPSC_H__ */ |