diff options
Diffstat (limited to 'drivers/serial/serial_cs.c')
| -rw-r--r-- | drivers/serial/serial_cs.c | 747 |
1 files changed, 747 insertions, 0 deletions
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c new file mode 100644 index 000000000000..9034f9ad37c7 --- /dev/null +++ b/drivers/serial/serial_cs.c @@ -0,0 +1,747 @@ +/*====================================================================== + + A driver for PCMCIA serial devices + + serial_cs.c 1.134 2002/05/04 05:48:53 + + The contents of this file are subject to the Mozilla Public + License Version 1.1 (the "License"); you may not use this file + except in compliance with the License. You may obtain a copy of + the License at http://www.mozilla.org/MPL/ + + Software distributed under the License is distributed on an "AS + IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or + implied. See the License for the specific language governing + rights and limitations under the License. + + The initial developer of the original code is David A. Hinds + <dahinds@users.sourceforge.net>. Portions created by David A. Hinds + are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + + Alternatively, the contents of this file may be used under the + terms of the GNU General Public License version 2 (the "GPL"), in which + case the provisions of the GPL are applicable instead of the + above. If you wish to allow the use of your version of this file + only under the terms of the GPL and not to allow others to use + your version of this file under the MPL, indicate your decision + by deleting the provisions above and replace them with the notice + and other provisions required by the GPL. If you do not delete + the provisions above, a recipient may use your version of this + file under either the MPL or the GPL. + +======================================================================*/ + +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ptrace.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/serial_core.h> +#include <linux/major.h> +#include <asm/io.h> +#include <asm/system.h> + +#include <pcmcia/version.h> +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/cistpl.h> +#include <pcmcia/ciscode.h> +#include <pcmcia/ds.h> +#include <pcmcia/cisreg.h> + +#include "8250.h" + +#ifdef PCMCIA_DEBUG +static int pc_debug = PCMCIA_DEBUG; +module_param(pc_debug, int, 0644); +#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args) +static char *version = "serial_cs.c 1.134 2002/05/04 05:48:53 (David Hinds)"; +#else +#define DEBUG(n, args...) +#endif + +/*====================================================================*/ + +/* Parameters that can be set with 'insmod' */ + +/* Enable the speaker? */ +static int do_sound = 1; +/* Skip strict UART tests? */ +static int buggy_uart; + +module_param(do_sound, int, 0444); +module_param(buggy_uart, int, 0444); + +/*====================================================================*/ + +/* Table of multi-port card ID's */ + +struct multi_id { + u_short manfid; + u_short prodid; + int multi; /* 1 = multifunction, > 1 = # ports */ +}; + +static struct multi_id multi_id[] = { + { MANFID_OMEGA, PRODID_OMEGA_QSP_100, 4 }, + { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232, 2 }, + { MANFID_QUATECH, PRODID_QUATECH_DUAL_RS232_D1, 2 }, + { MANFID_QUATECH, PRODID_QUATECH_QUAD_RS232, 4 }, + { MANFID_SOCKET, PRODID_SOCKET_DUAL_RS232, 2 }, + { MANFID_INTEL, PRODID_INTEL_DUAL_RS232, 2 }, + { MANFID_NATINST, PRODID_NATINST_QUAD_RS232, 4 } +}; +#define MULTI_COUNT (sizeof(multi_id)/sizeof(struct multi_id)) + +struct serial_info { + dev_link_t link; + int ndev; + int multi; + int slave; + int manfid; + dev_node_t node[4]; + int line[4]; +}; + +static void serial_config(dev_link_t * link); +static int serial_event(event_t event, int priority, + event_callback_args_t * args); + +static dev_info_t dev_info = "serial_cs"; + +static dev_link_t *serial_attach(void); +static void serial_detach(dev_link_t *); + +static dev_link_t *dev_list = NULL; + +/*====================================================================== + + After a card is removed, serial_remove() will unregister + the serial device(s), and release the PCMCIA configuration. + +======================================================================*/ + +static void serial_remove(dev_link_t *link) +{ + struct serial_info *info = link->priv; + int i; + + link->state &= ~DEV_PRESENT; + + DEBUG(0, "serial_release(0x%p)\n", link); + + /* + * Recheck to see if the device is still configured. + */ + if (info->link.state & DEV_CONFIG) { + for (i = 0; i < info->ndev; i++) + serial8250_unregister_port(info->line[i]); + + info->link.dev = NULL; + + if (!info->slave) { + pcmcia_release_configuration(info->link.handle); + pcmcia_release_io(info->link.handle, &info->link.io); + pcmcia_release_irq(info->link.handle, &info->link.irq); + } + + info->link.state &= ~DEV_CONFIG; + } +} + +static void serial_suspend(dev_link_t *link) +{ + link->state |= DEV_SUSPEND; + + if (link->state & DEV_CONFIG) { + struct serial_info *info = link->priv; + int i; + + for (i = 0; i < info->ndev; i++) + serial8250_suspend_port(info->line[i]); + + if (!info->slave) + pcmcia_release_configuration(link->handle); + } +} + +static void serial_resume(dev_link_t *link) +{ + link->state &= ~DEV_SUSPEND; + + if (DEV_OK(link)) { + struct serial_info *info = link->priv; + int i; + + if (!info->slave) + pcmcia_request_configuration(link->handle, &link->conf); + + for (i = 0; i < info->ndev; i++) + serial8250_resume_port(info->line[i]); + } +} + +/*====================================================================== + + serial_attach() creates an "instance" of the driver, allocating + local data structures for one device. The device is registered + with Card Services. + +======================================================================*/ + +static dev_link_t *serial_attach(void) +{ + struct serial_info *info; + client_reg_t client_reg; + dev_link_t *link; + int ret; + + DEBUG(0, "serial_attach()\n"); + + /* Create new serial device */ + info = kmalloc(sizeof (*info), GFP_KERNEL); + if (!info) + return NULL; + memset(info, 0, sizeof (*info)); + link = &info->link; + link->priv = info; + + link->io.Attributes1 = IO_DATA_PATH_WIDTH_8; + link->io.NumPorts1 = 8; + link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; + link->irq.IRQInfo1 = IRQ_LEVEL_ID; + link->conf.Attributes = CONF_ENABLE_IRQ; + if (do_sound) { + link->conf.Attributes |= CONF_ENABLE_SPKR; + link->conf.Status = CCSR_AUDIO_ENA; + } + link->conf.IntType = INT_MEMORY_AND_IO; + + /* Register with Card Services */ + link->next = dev_list; + dev_list = link; + client_reg.dev_info = &dev_info; + client_reg.EventMask = + CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL | + CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET | + CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME; + client_reg.event_handler = &serial_event; + client_reg.Version = 0x0210; + client_reg.event_callback_args.client_data = link; + ret = pcmcia_register_client(&link->handle, &client_reg); + if (ret != CS_SUCCESS) { + cs_error(link->handle, RegisterClient, ret); + serial_detach(link); + return NULL; + } + + return link; +} + +/*====================================================================== + + This deletes a driver "instance". The device is de-registered + with Card Services. If it has been released, all local data + structures are freed. Otherwise, the structures will be freed + when the device is released. + +======================================================================*/ + +static void serial_detach(dev_link_t * link) +{ + struct serial_info *info = link->priv; + dev_link_t **linkp; + int ret; + + DEBUG(0, "serial_detach(0x%p)\n", link); + + /* Locate device structure */ + for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next) + if (*linkp == link) + break; + if (*linkp == NULL) + return; + + /* + * Ensure any outstanding scheduled tasks are completed. + */ + flush_scheduled_work(); + + /* + * Ensure that the ports have been released. + */ + serial_remove(link); + + if (link->handle) { + ret = pcmcia_deregister_client(link->handle); + if (ret != CS_SUCCESS) + cs_error(link->handle, DeregisterClient, ret); + } + + /* Unlink device structure, free bits */ + *linkp = link->next; + kfree(info); +} + +/*====================================================================*/ + +static int setup_serial(client_handle_t handle, struct serial_info * info, + kio_addr_t iobase, int irq) +{ + struct uart_port port; + int line; + + memset(&port, 0, sizeof (struct uart_port)); + port.iobase = iobase; + port.irq = irq; + port.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_SHARE_IRQ; + port.uartclk = 1843200; + port.dev = &handle_to_dev(handle); + if (buggy_uart) + port.flags |= UPF_BUGGY_UART; + line = serial8250_register_port(&port); + if (line < 0) { + printk(KERN_NOTICE "serial_cs: serial8250_register_port() at " + "0x%04lx, irq %d failed\n", (u_long)iobase, irq); + return -EINVAL; + } + + info->line[info->ndev] = line; + sprintf(info->node[info->ndev].dev_name, "ttyS%d", line); + info->node[info->ndev].major = TTY_MAJOR; + info->node[info->ndev].minor = 0x40 + line; + if (info->ndev > 0) + info->node[info->ndev - 1].next = &info->node[info->ndev]; + info->ndev++; + + return 0; +} + +/*====================================================================*/ + +static int +first_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse) +{ + int i; + i = pcmcia_get_first_tuple(handle, tuple); + if (i != CS_SUCCESS) + return CS_NO_MORE_ITEMS; + i = pcmcia_get_tuple_data(handle, tuple); + if (i != CS_SUCCESS) + return i; + return pcmcia_parse_tuple(handle, tuple, parse); +} + +static int +next_tuple(client_handle_t handle, tuple_t * tuple, cisparse_t * parse) +{ + int i; + i = pcmcia_get_next_tuple(handle, tuple); + if (i != CS_SUCCESS) + return CS_NO_MORE_ITEMS; + i = pcmcia_get_tuple_data(handle, tuple); + if (i != CS_SUCCESS) + return i; + return pcmcia_parse_tuple(handle, tuple, parse); +} + +/*====================================================================*/ + +static int simple_config(dev_link_t *link) +{ + static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 }; + static int size_table[2] = { 8, 16 }; + client_handle_t handle = link->handle; + struct serial_info *info = link->priv; + tuple_t tuple; + u_char buf[256]; + cisparse_t parse; + cistpl_cftable_entry_t *cf = &parse.cftable_entry; + config_info_t config; + int i, j, try; + int s; + + /* If the card is already configured, look up the port and irq */ + i = pcmcia_get_configuration_info(handle, &config); + if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) { + kio_addr_t port = 0; + if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) { + port = config.BasePort2; + info->slave = 1; + } else if ((info->manfid == MANFID_OSITECH) && + (config.NumPorts1 == 0x40)) { + port = config.BasePort1 + 0x28; + info->slave = 1; + } + if (info->slave) + return setup_serial(handle, info, port, config.AssignedIRQ); + } + link->conf.Vcc = config.Vcc; + + /* First pass: look for a config entry that looks normal. */ + tuple.TupleData = (cisdata_t *) buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + /* Two tries: without IO aliases, then with aliases */ + for (s = 0; s < 2; s++) { + for (try = 0; try < 2; try++) { + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + if (i != CS_SUCCESS) + goto next_entry; + if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM)) + link->conf.Vpp1 = link->conf.Vpp2 = + cf->vpp1.param[CISTPL_POWER_VNOM] / 10000; + if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) && + (cf->io.win[0].base != 0)) { + link->conf.ConfigIndex = cf->index; + link->io.BasePort1 = cf->io.win[0].base; + link->io.IOAddrLines = (try == 0) ? + 16 : cf->io.flags & CISTPL_IO_LINES_MASK; + i = pcmcia_request_io(link->handle, &link->io); + if (i == CS_SUCCESS) + goto found_port; + } +next_entry: + i = next_tuple(handle, &tuple, &parse); + } + } + } + /* Second pass: try to find an entry that isn't picky about + its base address, then try to grab any standard serial port + address, and finally try to get any free port. */ + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + if ((i == CS_SUCCESS) && (cf->io.nwin > 0) && + ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) { + link->conf.ConfigIndex = cf->index; + for (j = 0; j < 5; j++) { + link->io.BasePort1 = base[j]; + link->io.IOAddrLines = base[j] ? 16 : 3; + i = pcmcia_request_io(link->handle, &link->io); + if (i == CS_SUCCESS) + goto found_port; + } + } + i = next_tuple(handle, &tuple, &parse); + } + + found_port: + if (i != CS_SUCCESS) { + printk(KERN_NOTICE + "serial_cs: no usable port range found, giving up\n"); + cs_error(link->handle, RequestIO, i); + return -1; + } + + i = pcmcia_request_irq(link->handle, &link->irq); + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestIRQ, i); + link->irq.AssignedIRQ = 0; + } + if (info->multi && (info->manfid == MANFID_3COM)) + link->conf.ConfigIndex &= ~(0x08); + i = pcmcia_request_configuration(link->handle, &link->conf); + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestConfiguration, i); + return -1; + } + + return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); +} + +static int multi_config(dev_link_t * link) +{ + client_handle_t handle = link->handle; + struct serial_info *info = link->priv; + tuple_t tuple; + u_char buf[256]; + cisparse_t parse; + cistpl_cftable_entry_t *cf = &parse.cftable_entry; + config_info_t config; + int i, base2 = 0; + + i = pcmcia_get_configuration_info(handle, &config); + if (i != CS_SUCCESS) { + cs_error(handle, GetConfigurationInfo, i); + return -1; + } + link->conf.Vcc = config.Vcc; + + tuple.TupleData = (cisdata_t *) buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + tuple.Attributes = 0; + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + + /* First, look for a generic full-sized window */ + link->io.NumPorts1 = info->multi * 8; + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + /* The quad port cards have bad CIS's, so just look for a + window larger than 8 ports and assume it will be right */ + if ((i == CS_SUCCESS) && (cf->io.nwin == 1) && + (cf->io.win[0].len > 8)) { + link->conf.ConfigIndex = cf->index; + link->io.BasePort1 = cf->io.win[0].base; + link->io.IOAddrLines = + cf->io.flags & CISTPL_IO_LINES_MASK; + i = pcmcia_request_io(link->handle, &link->io); + base2 = link->io.BasePort1 + 8; + if (i == CS_SUCCESS) + break; + } + i = next_tuple(handle, &tuple, &parse); + } + + /* If that didn't work, look for two windows */ + if (i != CS_SUCCESS) { + link->io.NumPorts1 = link->io.NumPorts2 = 8; + info->multi = 2; + i = first_tuple(handle, &tuple, &parse); + while (i != CS_NO_MORE_ITEMS) { + if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) { + link->conf.ConfigIndex = cf->index; + link->io.BasePort1 = cf->io.win[0].base; + link->io.BasePort2 = cf->io.win[1].base; + link->io.IOAddrLines = + cf->io.flags & CISTPL_IO_LINES_MASK; + i = pcmcia_request_io(link->handle, &link->io); + base2 = link->io.BasePort2; + if (i == CS_SUCCESS) + break; + } + i = next_tuple(handle, &tuple, &parse); + } + } + + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestIO, i); + return -1; + } + + i = pcmcia_request_irq(link->handle, &link->irq); + if (i != CS_SUCCESS) { + printk(KERN_NOTICE + "serial_cs: no usable port range found, giving up\n"); + cs_error(link->handle, RequestIRQ, i); + link->irq.AssignedIRQ = 0; + } + /* Socket Dual IO: this enables irq's for second port */ + if (info->multi && (info->manfid == MANFID_SOCKET)) { + link->conf.Present |= PRESENT_EXT_STATUS; + link->conf.ExtStatus = ESR_REQ_ATTN_ENA; + } + i = pcmcia_request_configuration(link->handle, &link->conf); + if (i != CS_SUCCESS) { + cs_error(link->handle, RequestConfiguration, i); + return -1; + } + + /* The Oxford Semiconductor OXCF950 cards are in fact single-port: + 8 registers are for the UART, the others are extra registers */ + if (info->manfid == MANFID_OXSEMI) { + if (cf->index == 1 || cf->index == 3) { + setup_serial(handle, info, base2, link->irq.AssignedIRQ); + outb(12, link->io.BasePort1 + 1); + } else { + setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); + outb(12, base2 + 1); + } + return 0; + } + + setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ); + /* The Nokia cards are not really multiport cards */ + if (info->manfid == MANFID_NOKIA) + return 0; + for (i = 0; i < info->multi - 1; i++) + setup_serial(handle, info, base2 + (8 * i), link->irq.AssignedIRQ); + + return 0; +} + +/*====================================================================== + + serial_config() is scheduled to run after a CARD_INSERTION event + is received, to configure the PCMCIA socket, and to make the + serial device available to the system. + +======================================================================*/ + +void serial_config(dev_link_t * link) +{ + client_handle_t handle = link->handle; + struct serial_info *info = link->priv; + tuple_t tuple; + u_short buf[128]; + cisparse_t parse; + cistpl_cftable_entry_t *cf = &parse.cftable_entry; + int i, last_ret, last_fn; + + DEBUG(0, "serial_config(0x%p)\n", link); + + tuple.TupleData = (cisdata_t *) buf; + tuple.TupleOffset = 0; + tuple.TupleDataMax = 255; + tuple.Attributes = 0; + /* Get configuration register information */ + tuple.DesiredTuple = CISTPL_CONFIG; + last_ret = first_tuple(handle, &tuple, &parse); + if (last_ret != CS_SUCCESS) { + last_fn = ParseTuple; + goto cs_failed; + } + link->conf.ConfigBase = parse.config.base; + link->conf.Present = parse.config.rmask[0]; + + /* Configure card */ + link->state |= DEV_CONFIG; + + /* Is this a compliant multifunction card? */ + tuple.DesiredTuple = CISTPL_LONGLINK_MFC; + tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK; + info->multi = (first_tuple(handle, &tuple, &parse) == CS_SUCCESS); + + /* Is this a multiport card? */ + tuple.DesiredTuple = CISTPL_MANFID; + if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) { + info->manfid = le16_to_cpu(buf[0]); + for (i = 0; i < MULTI_COUNT; i++) + if ((info->manfid == multi_id[i].manfid) && + (le16_to_cpu(buf[1]) == multi_id[i].prodid)) + break; + if (i < MULTI_COUNT) + info->multi = multi_id[i].multi; + } + + /* Another check for dual-serial cards: look for either serial or + multifunction cards that ask for appropriate IO port ranges */ + tuple.DesiredTuple = CISTPL_FUNCID; + if ((info->multi == 0) && + ((first_tuple(handle, &tuple, &parse) != CS_SUCCESS) || + (parse.funcid.func == CISTPL_FUNCID_MULTI) || + (parse.funcid.func == CISTPL_FUNCID_SERIAL))) { + tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY; + if (first_tuple(handle, &tuple, &parse) == CS_SUCCESS) { + if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0)) + info->multi = cf->io.win[0].len >> 3; + if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) && + (cf->io.win[1].len == 8)) + info->multi = 2; + } + } + + if (info->multi > 1) + multi_config(link); + else + simple_config(link); + + if (info->ndev == 0) + goto failed; + + if (info->manfid == MANFID_IBM) { + conf_reg_t reg = { 0, CS_READ, 0x800, 0 }; + last_ret = pcmcia_access_configuration_register(link->handle, ®); + if (last_ret) { + last_fn = AccessConfigurationRegister; + goto cs_failed; + } + reg.Action = CS_WRITE; + reg.Value = reg.Value | 1; + last_ret = pcmcia_access_configuration_register(link->handle, ®); + if (last_ret) { + last_fn = AccessConfigurationRegister; + goto cs_failed; + } + } + + link->dev = &info->node[0]; + link->state &= ~DEV_CONFIG_PENDING; + return; + + cs_failed: + cs_error(link->handle, last_fn, last_ret); + failed: + serial_remove(link); + link->state &= ~DEV_CONFIG_PENDING; +} + +/*====================================================================== + + The card status event handler. Mostly, this schedules other + stuff to run after an event is received. A CARD_REMOVAL event + also sets some flags to discourage the serial drivers from + talking to the ports. + +======================================================================*/ + +static int +serial_event(event_t event, int priority, event_callback_args_t * args) +{ + dev_link_t *link = args->client_data; + struct serial_info *info = link->priv; + + DEBUG(1, "serial_event(0x%06x)\n", event); + + switch (event) { + case CS_EVENT_CARD_REMOVAL: + serial_remove(link); + break; + + case CS_EVENT_CARD_INSERTION: + link->state |= DEV_PRESENT | DEV_CONFIG_PENDING; + serial_config(link); + break; + + case CS_EVENT_PM_SUSPEND: + serial_suspend(link); + break; + + case CS_EVENT_RESET_PHYSICAL: + if ((link->state & DEV_CONFIG) && !info->slave) + pcmcia_release_configuration(link->handle); + break; + + case CS_EVENT_PM_RESUME: + serial_resume(link); + break; + + case CS_EVENT_CARD_RESET: + if (DEV_OK(link) && !info->slave) + pcmcia_request_configuration(link->handle, &link->conf); + break; + } + return 0; +} + +static struct pcmcia_driver serial_cs_driver = { + .owner = THIS_MODULE, + .drv = { + .name = "serial_cs", + }, + .attach = serial_attach, + .detach = serial_detach, +}; + +static int __init init_serial_cs(void) +{ + return pcmcia_register_driver(&serial_cs_driver); +} + +static void __exit exit_serial_cs(void) +{ + pcmcia_unregister_driver(&serial_cs_driver); + BUG_ON(dev_list != NULL); +} + +module_init(init_serial_cs); +module_exit(exit_serial_cs); + +MODULE_LICENSE("GPL"); |