summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c90
-rw-r--r--drivers/serial/atmel_serial.c1
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_core.c143
-rw-r--r--drivers/serial/serial_cs.c1
-rw-r--r--drivers/serial/suncore.c4
-rw-r--r--drivers/serial/sunsu.c13
7 files changed, 170 insertions, 84 deletions
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index b09a638d051f..50441ffe8e38 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -782,7 +782,7 @@ static int pl010_resume(struct amba_device *dev)
return 0;
}
-static struct amba_id pl010_ids[] __initdata = {
+static struct amba_id pl010_ids[] = {
{
.id = 0x00041010,
.mask = 0x000fffff,
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index eb4cb480b93e..6ca7a44f29c2 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -69,9 +69,12 @@
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
- unsigned int im; /* interrupt mask */
+ unsigned int im; /* interrupt mask */
unsigned int old_status;
- unsigned int ifls; /* vendor-specific */
+ unsigned int ifls; /* vendor-specific */
+ unsigned int lcrh_tx; /* vendor-specific */
+ unsigned int lcrh_rx; /* vendor-specific */
+ bool oversampling; /* vendor-specific */
bool autorts;
};
@@ -79,16 +82,25 @@ struct uart_amba_port {
struct vendor_data {
unsigned int ifls;
unsigned int fifosize;
+ unsigned int lcrh_tx;
+ unsigned int lcrh_rx;
+ bool oversampling;
};
static struct vendor_data vendor_arm = {
.ifls = UART011_IFLS_RX4_8|UART011_IFLS_TX4_8,
.fifosize = 16,
+ .lcrh_tx = UART011_LCRH,
+ .lcrh_rx = UART011_LCRH,
+ .oversampling = false,
};
static struct vendor_data vendor_st = {
.ifls = UART011_IFLS_RX_HALF|UART011_IFLS_TX_HALF,
.fifosize = 64,
+ .lcrh_tx = ST_UART011_LCRH_TX,
+ .lcrh_rx = ST_UART011_LCRH_RX,
+ .oversampling = true,
};
static void pl011_stop_tx(struct uart_port *port)
@@ -327,12 +339,12 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
unsigned int lcr_h;
spin_lock_irqsave(&uap->port.lock, flags);
- lcr_h = readw(uap->port.membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
if (break_state == -1)
lcr_h |= UART01x_LCRH_BRK;
else
lcr_h &= ~UART01x_LCRH_BRK;
- writew(lcr_h, uap->port.membase + UART011_LCRH);
+ writew(lcr_h, uap->port.membase + uap->lcrh_tx);
spin_unlock_irqrestore(&uap->port.lock, flags);
}
@@ -393,7 +405,17 @@ static int pl011_startup(struct uart_port *port)
writew(cr, uap->port.membase + UART011_CR);
writew(0, uap->port.membase + UART011_FBRD);
writew(1, uap->port.membase + UART011_IBRD);
- writew(0, uap->port.membase + UART011_LCRH);
+ writew(0, uap->port.membase + uap->lcrh_rx);
+ if (uap->lcrh_tx != uap->lcrh_rx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(0, uap->port.membase + uap->lcrh_tx);
+ }
writew(0, uap->port.membase + UART01x_DR);
while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY)
barrier();
@@ -422,10 +444,19 @@ static int pl011_startup(struct uart_port *port)
return retval;
}
+static void pl011_shutdown_channel(struct uart_amba_port *uap,
+ unsigned int lcrh)
+{
+ unsigned long val;
+
+ val = readw(uap->port.membase + lcrh);
+ val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
+ writew(val, uap->port.membase + lcrh);
+}
+
static void pl011_shutdown(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
- unsigned long val;
/*
* disable all interrupts
@@ -450,9 +481,9 @@ static void pl011_shutdown(struct uart_port *port)
/*
* disable break condition and fifos
*/
- val = readw(uap->port.membase + UART011_LCRH);
- val &= ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN);
- writew(val, uap->port.membase + UART011_LCRH);
+ pl011_shutdown_channel(uap, uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx)
+ pl011_shutdown_channel(uap, uap->lcrh_tx);
/*
* Shut down the clock producer
@@ -472,8 +503,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
/*
* Ask the core to calculate the divisor for us.
*/
- baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
- quot = port->uartclk * 4 / baud;
+ baud = uart_get_baud_rate(port, termios, old, 0,
+ port->uartclk/(uap->oversampling ? 8 : 16));
+
+ if (baud > port->uartclk/16)
+ quot = DIV_ROUND_CLOSEST(port->uartclk * 8, baud);
+ else
+ quot = DIV_ROUND_CLOSEST(port->uartclk * 4, baud);
switch (termios->c_cflag & CSIZE) {
case CS5:
@@ -552,6 +588,13 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
uap->autorts = false;
}
+ if (uap->oversampling) {
+ if (baud > port->uartclk/16)
+ old_cr |= ST_UART011_CR_OVSFACT;
+ else
+ old_cr &= ~ST_UART011_CR_OVSFACT;
+ }
+
/* Set baud rate */
writew(quot & 0x3f, port->membase + UART011_FBRD);
writew(quot >> 6, port->membase + UART011_IBRD);
@@ -561,7 +604,17 @@ pl011_set_termios(struct uart_port *port, struct ktermios *termios,
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
* ----------^----------^----------^----------^-----
*/
- writew(lcr_h, port->membase + UART011_LCRH);
+ writew(lcr_h, port->membase + uap->lcrh_rx);
+ if (uap->lcrh_rx != uap->lcrh_tx) {
+ int i;
+ /*
+ * Wait 10 PCLKs before writing LCRH_TX register,
+ * to get this delay write read only register 10 times
+ */
+ for (i = 0; i < 10; ++i)
+ writew(0xff, uap->port.membase + UART011_MIS);
+ writew(lcr_h, port->membase + uap->lcrh_tx);
+ }
writew(old_cr, port->membase + UART011_CR);
spin_unlock_irqrestore(&port->lock, flags);
@@ -688,7 +741,7 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
if (readw(uap->port.membase + UART011_CR) & UART01x_CR_UARTEN) {
unsigned int lcr_h, ibrd, fbrd;
- lcr_h = readw(uap->port.membase + UART011_LCRH);
+ lcr_h = readw(uap->port.membase + uap->lcrh_tx);
*parity = 'n';
if (lcr_h & UART01x_LCRH_PEN) {
@@ -707,6 +760,12 @@ pl011_console_get_options(struct uart_amba_port *uap, int *baud,
fbrd = readw(uap->port.membase + UART011_FBRD);
*baud = uap->port.uartclk * 4 / (64 * ibrd + fbrd);
+
+ if (uap->oversampling) {
+ if (readw(uap->port.membase + UART011_CR)
+ & ST_UART011_CR_OVSFACT)
+ *baud *= 2;
+ }
}
}
@@ -800,6 +859,9 @@ static int pl011_probe(struct amba_device *dev, struct amba_id *id)
}
uap->ifls = vendor->ifls;
+ uap->lcrh_rx = vendor->lcrh_rx;
+ uap->lcrh_tx = vendor->lcrh_tx;
+ uap->oversampling = vendor->oversampling;
uap->port.dev = &dev->dev;
uap->port.mapbase = dev->res.start;
uap->port.membase = base;
@@ -868,7 +930,7 @@ static int pl011_resume(struct amba_device *dev)
}
#endif
-static struct amba_id pl011_ids[] __initdata = {
+static struct amba_id pl011_ids[] = {
{
.id = 0x00041011,
.mask = 0x000fffff,
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index eed3c2d8dd1c..a182def7007d 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -41,6 +41,7 @@
#include <linux/uaccess.h>
#include <asm/io.h>
+#include <asm/ioctls.h>
#include <asm/mach/serial_at91.h>
#include <mach/board.h>
diff --git a/drivers/serial/cpm_uart/cpm_uart_core.c b/drivers/serial/cpm_uart/cpm_uart_core.c
index 9259e849f463..6016179db533 100644
--- a/drivers/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/serial/cpm_uart/cpm_uart_core.c
@@ -930,6 +930,83 @@ static void cpm_uart_config_port(struct uart_port *port, int flags)
}
}
+#if defined(CONFIG_CONSOLE_POLL) || defined(CONFIG_SERIAL_CPM_CONSOLE)
+/*
+ * Write a string to the serial port
+ * Note that this is called with interrupts already disabled
+ */
+static void cpm_uart_early_write(struct uart_cpm_port *pinfo,
+ const char *string, u_int count)
+{
+ unsigned int i;
+ cbd_t __iomem *bdp, *bdbase;
+ unsigned char *cpm_outp_addr;
+
+ /* Get the address of the host memory buffer.
+ */
+ bdp = pinfo->tx_cur;
+ bdbase = pinfo->tx_bd_base;
+
+ /*
+ * Now, do each character. This is not as bad as it looks
+ * since this is a holding FIFO and not a transmitting FIFO.
+ * We could add the complexity of filling the entire transmit
+ * buffer, but we would just wait longer between accesses......
+ */
+ for (i = 0; i < count; i++, string++) {
+ /* Wait for transmitter fifo to empty.
+ * Ready indicates output is ready, and xmt is doing
+ * that, not that it is ready for us to send.
+ */
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ /* Send the character out.
+ * If the buffer address is in the CPM DPRAM, don't
+ * convert it.
+ */
+ cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+ pinfo);
+ *cpm_outp_addr = *string;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+
+ /* if a LF, also do CR... */
+ if (*string == 10) {
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ cpm_outp_addr = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr),
+ pinfo);
+ *cpm_outp_addr = 13;
+
+ out_be16(&bdp->cbd_datlen, 1);
+ setbits16(&bdp->cbd_sc, BD_SC_READY);
+
+ if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
+ bdp = bdbase;
+ else
+ bdp++;
+ }
+ }
+
+ /*
+ * Finally, Wait for transmitter & holding register to empty
+ * and restore the IER
+ */
+ while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
+ ;
+
+ pinfo->tx_cur = bdp;
+}
+#endif
+
#ifdef CONFIG_CONSOLE_POLL
/* Serial polling routines for writing and reading from the uart while
* in an interrupt or debug context.
@@ -999,7 +1076,7 @@ static void cpm_put_poll_char(struct uart_port *port,
static char ch[2];
ch[0] = (char)c;
- cpm_uart_early_write(pinfo->port.line, ch, 1);
+ cpm_uart_early_write(pinfo, ch, 1);
}
#endif /* CONFIG_CONSOLE_POLL */
@@ -1130,9 +1207,6 @@ static void cpm_uart_console_write(struct console *co, const char *s,
u_int count)
{
struct uart_cpm_port *pinfo = &cpm_uart_ports[co->index];
- unsigned int i;
- cbd_t __iomem *bdp, *bdbase;
- unsigned char *cp;
unsigned long flags;
int nolock = oops_in_progress;
@@ -1142,66 +1216,7 @@ static void cpm_uart_console_write(struct console *co, const char *s,
spin_lock_irqsave(&pinfo->port.lock, flags);
}
- /* Get the address of the host memory buffer.
- */
- bdp = pinfo->tx_cur;
- bdbase = pinfo->tx_bd_base;
-
- /*
- * Now, do each character. This is not as bad as it looks
- * since this is a holding FIFO and not a transmitting FIFO.
- * We could add the complexity of filling the entire transmit
- * buffer, but we would just wait longer between accesses......
- */
- for (i = 0; i < count; i++, s++) {
- /* Wait for transmitter fifo to empty.
- * Ready indicates output is ready, and xmt is doing
- * that, not that it is ready for us to send.
- */
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- /* Send the character out.
- * If the buffer address is in the CPM DPRAM, don't
- * convert it.
- */
- cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- *cp = *s;
-
- out_be16(&bdp->cbd_datlen, 1);
- setbits16(&bdp->cbd_sc, BD_SC_READY);
-
- if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
- bdp = bdbase;
- else
- bdp++;
-
- /* if a LF, also do CR... */
- if (*s == 10) {
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- cp = cpm2cpu_addr(in_be32(&bdp->cbd_bufaddr), pinfo);
- *cp = 13;
-
- out_be16(&bdp->cbd_datlen, 1);
- setbits16(&bdp->cbd_sc, BD_SC_READY);
-
- if (in_be16(&bdp->cbd_sc) & BD_SC_WRAP)
- bdp = bdbase;
- else
- bdp++;
- }
- }
-
- /*
- * Finally, Wait for transmitter & holding register to empty
- * and restore the IER
- */
- while ((in_be16(&bdp->cbd_sc) & BD_SC_READY) != 0)
- ;
-
- pinfo->tx_cur = bdp;
+ cpm_uart_early_write(pinfo, s, count);
if (unlikely(nolock)) {
local_irq_restore(flags);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 526307368f8b..ab17c08ddc03 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -821,6 +821,7 @@ static struct pcmcia_device_id serial_ids[] = {
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet", 0xf5f025c2, 0x338e8155, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "Psion Dacom", "Gold Card V34 Ethernet GSM", 0xf5f025c2, 0x4ae85d35, "cis/PCMLM28.cis"),
PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "LINKSYS", "PCMLM28", 0xf7cb0b07, 0x66881874, "cis/PCMLM28.cis"),
+ PCMCIA_PFC_DEVICE_CIS_PROD_ID12(1, "TOSHIBA", "Modem/LAN Card", 0xb4585a1a, 0x53f922f8, "cis/PCMLM28.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID12(1, "DAYNA COMMUNICATIONS", "LAN AND MODEM MULTIFUNCTION", 0x8fdf8f89, 0xdd5ed9e8, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_PROD_ID4(1, "NSC MF LAN/Modem", 0x58fc6056, "cis/DP83903.cis"),
PCMCIA_MFC_DEVICE_CIS_MANF_CARD(1, 0x0101, 0x0556, "cis/3CCFEM556.cis"),
diff --git a/drivers/serial/suncore.c b/drivers/serial/suncore.c
index ed7d958b0a01..544f2e25d0e5 100644
--- a/drivers/serial/suncore.c
+++ b/drivers/serial/suncore.c
@@ -71,7 +71,9 @@ int sunserial_console_match(struct console *con, struct device_node *dp,
con->index = line;
drv->cons = con;
- add_preferred_console(con->name, line, NULL);
+
+ if (!console_set_on_cmdline)
+ add_preferred_console(con->name, line, NULL);
return 1;
}
diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c
index 234459c2f012..ffbf4553f665 100644
--- a/drivers/serial/sunsu.c
+++ b/drivers/serial/sunsu.c
@@ -1500,20 +1500,25 @@ out_unmap:
static int __devexit su_remove(struct of_device *op)
{
struct uart_sunsu_port *up = dev_get_drvdata(&op->dev);
+ bool kbdms = false;
if (up->su_type == SU_PORT_MS ||
- up->su_type == SU_PORT_KBD) {
+ up->su_type == SU_PORT_KBD)
+ kbdms = true;
+
+ if (kbdms) {
#ifdef CONFIG_SERIO
serio_unregister_port(&up->serio);
#endif
- kfree(up);
- } else if (up->port.type != PORT_UNKNOWN) {
+ } else if (up->port.type != PORT_UNKNOWN)
uart_remove_one_port(&sunsu_reg, &up->port);
- }
if (up->port.membase)
of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
+ if (kbdms)
+ kfree(up);
+
dev_set_drvdata(&op->dev, NULL);
return 0;