summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/bfin_5xx.c56
-rw-r--r--drivers/serial/sunzilog.c30
2 files changed, 54 insertions, 32 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c
index 46bb47f37b9a..5f55534a290b 100644
--- a/drivers/serial/bfin_5xx.c
+++ b/drivers/serial/bfin_5xx.c
@@ -151,7 +151,8 @@ void kgdb_put_debug_char(int chr)
{
struct bfin_serial_port *uart;
- if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ if (CONFIG_KGDB_UART_PORT < 0
+ || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
@@ -173,7 +174,8 @@ int kgdb_get_debug_char(void)
struct bfin_serial_port *uart;
unsigned char chr;
- if (CONFIG_KGDB_UART_PORT<0 || CONFIG_KGDB_UART_PORT>=NR_PORTS)
+ if (CONFIG_KGDB_UART_PORT < 0
+ || CONFIG_KGDB_UART_PORT >= BFIN_UART_NR_PORTS)
uart = &bfin_serial_ports[0];
else
uart = &bfin_serial_ports[CONFIG_KGDB_UART_PORT];
@@ -192,7 +194,7 @@ int kgdb_get_debug_char(void)
}
#endif
-#if ANOMALY_05000230 && defined(CONFIG_SERIAL_BFIN_PIO)
+#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO)
# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold)
# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v))
#else
@@ -237,7 +239,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
}
#endif
- if (ANOMALY_05000230) {
+ if (ANOMALY_05000363) {
/* The BF533 (and BF561) family of processors have a nice anomaly
* where they continuously generate characters for a "single" break.
* We have to basically ignore this flood until the "next" valid
@@ -249,9 +251,6 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
* timeout was picked as it must absolutely be larger than 1
* character time +/- some percent. So 1.5 sounds good. All other
* Blackfin families operate properly. Woo.
- * Note: While Anomaly 05000230 does not directly address this,
- * the changes that went in for it also fixed this issue.
- * That anomaly was fixed in 0.5+ silicon. I like bunnies.
*/
if (anomaly_start.tv_sec) {
struct timeval curr;
@@ -285,7 +284,7 @@ static void bfin_serial_rx_chars(struct bfin_serial_port *uart)
}
if (status & BI) {
- if (ANOMALY_05000230)
+ if (ANOMALY_05000363)
if (bfin_revid() < 5)
do_gettimeofday(&anomaly_start);
uart->port.icount.brk++;
@@ -507,8 +506,7 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart)
uart->rx_dma_buf.tail = uart->rx_dma_buf.head;
}
- uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES;
- add_timer(&(uart->rx_dma_timer));
+ mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES);
}
static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id)
@@ -551,9 +549,7 @@ static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id)
clear_dma_irqstat(uart->rx_dma_channel);
spin_unlock(&uart->port.lock);
- del_timer(&(uart->rx_dma_timer));
- uart->rx_dma_timer.expires = jiffies;
- add_timer(&(uart->rx_dma_timer));
+ mod_timer(&(uart->rx_dma_timer), jiffies);
return IRQ_HANDLED;
}
@@ -749,7 +745,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
struct bfin_serial_port *uart = (struct bfin_serial_port *)port;
unsigned long flags;
unsigned int baud, quot;
- unsigned short val, ier, lsr, lcr = 0;
+ unsigned short val, ier, lcr = 0;
switch (termios->c_cflag & CSIZE) {
case CS8:
@@ -806,10 +802,6 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios,
UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15);
- do {
- lsr = UART_GET_LSR(uart);
- } while (!(lsr & TEMT));
-
/* Disable UART */
ier = UART_GET_IER(uart);
#ifdef CONFIG_BF54x
@@ -900,6 +892,31 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser)
return 0;
}
+/*
+ * Enable the IrDA function if tty->ldisc.num is N_IRDA.
+ * In other cases, disable IrDA function.
+ */
+static void bfin_set_ldisc(struct tty_struct *tty)
+{
+ int line = tty->index;
+ unsigned short val;
+
+ if (line >= tty->driver->num)
+ return;
+
+ switch (tty->ldisc.num) {
+ case N_IRDA:
+ val = UART_GET_GCTL(&bfin_serial_ports[line]);
+ val |= (IREN | RPOLC);
+ UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ break;
+ default:
+ val = UART_GET_GCTL(&bfin_serial_ports[line]);
+ val &= ~(IREN | RPOLC);
+ UART_PUT_GCTL(&bfin_serial_ports[line], val);
+ }
+}
+
static struct uart_ops bfin_serial_pops = {
.tx_empty = bfin_serial_tx_empty,
.set_mctrl = bfin_serial_set_mctrl,
@@ -1172,7 +1189,7 @@ static struct uart_driver bfin_serial_reg = {
.dev_name = BFIN_SERIAL_NAME,
.major = BFIN_SERIAL_MAJOR,
.minor = BFIN_SERIAL_MINOR,
- .nr = NR_PORTS,
+ .nr = BFIN_UART_NR_PORTS,
.cons = BFIN_SERIAL_CONSOLE,
};
@@ -1261,6 +1278,7 @@ static int __init bfin_serial_init(void)
ret = uart_register_driver(&bfin_serial_reg);
if (ret == 0) {
+ bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc;
ret = platform_driver_register(&bfin_serial_driver);
if (ret) {
pr_debug("uart register failed\n");
diff --git a/drivers/serial/sunzilog.c b/drivers/serial/sunzilog.c
index cb2e40506379..3271379a36db 100644
--- a/drivers/serial/sunzilog.c
+++ b/drivers/serial/sunzilog.c
@@ -1015,6 +1015,7 @@ static struct uart_ops sunzilog_pops = {
.verify_port = sunzilog_verify_port,
};
+static int uart_chip_count;
static struct uart_sunzilog_port *sunzilog_port_table;
static struct zilog_layout __iomem **sunzilog_chip_regs;
@@ -1350,16 +1351,22 @@ static int zilog_irq = -1;
static int __devinit zs_probe(struct of_device *op, const struct of_device_id *match)
{
- static int inst;
+ static int kbm_inst, uart_inst;
+ int inst;
struct uart_sunzilog_port *up;
struct zilog_layout __iomem *rp;
- int keyboard_mouse;
+ int keyboard_mouse = 0;
int err;
- keyboard_mouse = 0;
if (of_find_property(op->node, "keyboard", NULL))
keyboard_mouse = 1;
+ /* uarts must come before keyboards/mice */
+ if (keyboard_mouse)
+ inst = uart_chip_count + kbm_inst;
+ else
+ inst = uart_inst;
+
sunzilog_chip_regs[inst] = of_ioremap(&op->resource[0], 0,
sizeof(struct zilog_layout),
"zs");
@@ -1427,6 +1434,7 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
rp, sizeof(struct zilog_layout));
return err;
}
+ uart_inst++;
} else {
printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) "
"is a %s\n",
@@ -1438,12 +1446,11 @@ static int __devinit zs_probe(struct of_device *op, const struct of_device_id *m
op->dev.bus_id,
(unsigned long long) up[1].port.mapbase,
op->irqs[0], sunzilog_type(&up[1].port));
+ kbm_inst++;
}
dev_set_drvdata(&op->dev, &up[0]);
- inst++;
-
return 0;
}
@@ -1491,28 +1498,25 @@ static struct of_platform_driver zs_driver = {
static int __init sunzilog_init(void)
{
struct device_node *dp;
- int err, uart_count;
- int num_keybms;
+ int err;
+ int num_keybms = 0;
int num_sunzilog = 0;
- num_keybms = 0;
for_each_node_by_name(dp, "zs") {
num_sunzilog++;
if (of_find_property(dp, "keyboard", NULL))
num_keybms++;
}
- uart_count = 0;
if (num_sunzilog) {
- int uart_count;
-
err = sunzilog_alloc_tables(num_sunzilog);
if (err)
goto out;
- uart_count = (num_sunzilog * 2) - (2 * num_keybms);
+ uart_chip_count = num_sunzilog - num_keybms;
- err = sunserial_register_minors(&sunzilog_reg, uart_count);
+ err = sunserial_register_minors(&sunzilog_reg,
+ uart_chip_count * 2);
if (err)
goto out_free_tables;
}
generated by cgit v1.2.3 (git 2.0.4) at 2025-01-22 19:56:49 +0000