summaryrefslogtreecommitdiff
path: root/drivers/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/serial')
-rw-r--r--drivers/serial/21285.c14
-rw-r--r--drivers/serial/8250.c32
-rw-r--r--drivers/serial/Kconfig11
-rw-r--r--drivers/serial/Makefile2
-rw-r--r--drivers/serial/amba-pl010.c14
-rw-r--r--drivers/serial/amba-pl011.c14
-rw-r--r--drivers/serial/clps711x.c5
-rw-r--r--drivers/serial/cpm_uart/cpm_uart_cpm2.c9
-rw-r--r--drivers/serial/ioc4_serial.c336
-rw-r--r--drivers/serial/pxa.c16
-rw-r--r--drivers/serial/s3c2410.c15
-rw-r--r--drivers/serial/sa1100.c7
-rw-r--r--drivers/serial/serial_cs.c4
-rw-r--r--drivers/serial/serial_lh7a40x.c13
-rw-r--r--drivers/serial/serial_txx9.c15
-rw-r--r--drivers/serial/sunsab.c109
-rw-r--r--drivers/serial/sunsab.h1
-rw-r--r--drivers/serial/vr41xx_siu.c72
18 files changed, 282 insertions, 407 deletions
diff --git a/drivers/serial/21285.c b/drivers/serial/21285.c
index 33fbda79f350..0b10169961eb 100644
--- a/drivers/serial/21285.c
+++ b/drivers/serial/21285.c
@@ -126,18 +126,8 @@ static irqreturn_t serial21285_rx_chars(int irq, void *dev_id, struct pt_regs *r
flag = TTY_FRAME;
}
- if ((rxs & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rxs & RXSTAT_OVERRUN) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, rxs, RXSTAT_OVERRUN, ch, flag);
+
status = *CSR_UARTFLG;
}
tty_flip_buffer_push(tty);
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index 0d9358608fdf..30e8beb71430 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -682,8 +682,6 @@ static void autoconfig_16550a(struct uart_8250_port *up)
* from EXCR1. Switch back to bank 0, change it in MCR. Then
* switch back to bank 2, read it from EXCR1 again and check
* it's changed. If so, set baud_base in EXCR2 to 921600. -- dwmw2
- * On PowerPC we don't want to change baud_base, as we have
- * a number of different divisors. -- Tom Rini
*/
serial_outp(up, UART_LCR, 0);
status1 = serial_in(up, UART_MCR);
@@ -699,16 +697,25 @@ static void autoconfig_16550a(struct uart_8250_port *up)
serial_outp(up, UART_MCR, status1);
if ((status2 ^ status1) & UART_MCR_LOOP) {
-#ifndef CONFIG_PPC
+ unsigned short quot;
+
serial_outp(up, UART_LCR, 0xE0);
+
+ quot = serial_inp(up, UART_DLM) << 8;
+ quot += serial_inp(up, UART_DLL);
+ quot <<= 3;
+
status1 = serial_in(up, 0x04); /* EXCR1 */
status1 &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
status1 |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
serial_outp(up, 0x04, status1);
+
+ serial_outp(up, UART_DLL, quot & 0xff);
+ serial_outp(up, UART_DLM, quot >> 8);
+
serial_outp(up, UART_LCR, 0);
- up->port.uartclk = 921600*16;
-#endif
+ up->port.uartclk = 921600*16;
up->port.type = PORT_NS16550A;
up->capabilities |= UART_NATSEMI;
return;
@@ -1122,18 +1129,9 @@ receive_chars(struct uart_8250_port *up, int *status, struct pt_regs *regs)
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((lsr & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((lsr & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, lsr, UART_LSR_OE, ch, flag);
+
ignore_char:
lsr = serial_inp(up, UART_LSR);
} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 6e44b46c9e9d..25fcef2c42de 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -753,7 +753,7 @@ config SERIAL_MPC52xx_CONSOLE_BAUD
config SERIAL_ICOM
tristate "IBM Multiport Serial Adapter"
- depends on PPC_ISERIES || PPC_PSERIES
+ depends on PCI && (PPC_ISERIES || PPC_PSERIES)
select SERIAL_CORE
help
This driver is for a family of multiport serial adapters
@@ -843,4 +843,13 @@ config SERIAL_JSM
To compile this driver as a module, choose M here: the
module will be called jsm.
+config SERIAL_SGI_IOC4
+ tristate "SGI IOC4 controller serial support"
+ depends on (IA64_GENERIC || IA64_SGI_SN2) && SGI_IOC4
+ select SERIAL_CORE
+ help
+ If you have an SGI Altix with an IOC4 based Base IO card
+ and wish to use the serial ports on this card, say Y.
+ Otherwise, say N.
+
endmenu
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 81b77d769b84..8f1cdde7dbed 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -51,4 +51,4 @@ obj-$(CONFIG_ETRAX_SERIAL) += crisv10.o
obj-$(CONFIG_SERIAL_JSM) += jsm/
obj-$(CONFIG_SERIAL_TXX9) += serial_txx9.o
obj-$(CONFIG_SERIAL_VR41XX) += vr41xx_siu.o
-obj-$(CONFIG_BLK_DEV_SGIIOC4) += ioc4_serial.o
+obj-$(CONFIG_SERIAL_SGI_IOC4) += ioc4_serial.o
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index f2a5e2933c47..2884b310e54d 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -198,18 +198,8 @@ pl010_rx_chars(struct uart_port *port)
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((rsr & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rsr & UART01x_RSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, rsr, UART01x_RSR_OE, ch, flag);
+
ignore_char:
status = UART_GET_FR(port);
}
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index d5cbef3fe8b6..7db88ee18f75 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -163,18 +163,8 @@ pl011_rx_chars(struct uart_amba_port *uap)
if (uart_handle_sysrq_char(&uap->port, ch, regs))
goto ignore_char;
- if ((rsr & uap->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((rsr & UART01x_RSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
+
ignore_char:
status = readw(uap->port.membase + UART01x_FR);
}
diff --git a/drivers/serial/clps711x.c b/drivers/serial/clps711x.c
index 6242f3090a96..e92522b33c48 100644
--- a/drivers/serial/clps711x.c
+++ b/drivers/serial/clps711x.c
@@ -143,10 +143,7 @@ static irqreturn_t clps711xuart_int_rx(int irq, void *dev_id, struct pt_regs *re
* CHECK: does overrun affect the current character?
* ASSUMPTION: it does not.
*/
- if ((ch & port->ignore_status_mask & ~RXSTAT_OVERRUN) == 0)
- tty_insert_flip_char(tty, ch, flg);
- if ((ch & ~port->ignore_status_mask & RXSTAT_OVERRUN) == 0)
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ uart_insert_char(port, ch, UARTDR_OVERR, ch, flg);
ignore_char:
status = clps_readl(SYSFLG(port));
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index b422c3abfba6..c4c8f4b44f53 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -134,12 +134,21 @@ void scc1_lineif(struct uart_cpm_port *pinfo)
void scc2_lineif(struct uart_cpm_port *pinfo)
{
+ /*
+ * STx GP3 uses the SCC2 secondary option pin assignment
+ * which this driver doesn't account for in the static
+ * pin assignments. This kind of board specific info
+ * really has to get out of the driver so boards can
+ * be supported in a sane fashion.
+ */
+#ifndef CONFIG_STX_GP3
volatile iop_cpm2_t *io = &cpm2_immr->im_ioport;
io->iop_pparb |= 0x008b0000;
io->iop_pdirb |= 0x00880000;
io->iop_psorb |= 0x00880000;
io->iop_pdirb &= ~0x00030000;
io->iop_psorb &= ~0x00030000;
+#endif
cpm2_immr->im_cpmux.cmx_scr &= 0xff00ffff;
cpm2_immr->im_cpmux.cmx_scr |= 0x00090000;
pinfo->brg = 2;
diff --git a/drivers/serial/ioc4_serial.c b/drivers/serial/ioc4_serial.c
index ba4e13a22a50..793c3a7cbe47 100644
--- a/drivers/serial/ioc4_serial.c
+++ b/drivers/serial/ioc4_serial.c
@@ -20,7 +20,7 @@
#include <linux/serial_reg.h>
#include <linux/module.h>
#include <linux/pci.h>
-#include <linux/ioc4_common.h>
+#include <linux/ioc4.h>
#include <linux/serial_core.h>
/*
@@ -130,12 +130,19 @@
IOC4_SIO_IR_S3_TX_EXPLICIT)
/* Bitmasks for IOC4_OTHER_IR, IOC4_OTHER_IEC, and IOC4_OTHER_IES */
-#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
-#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
-#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
-#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
-#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
-#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
+#define IOC4_OTHER_IR_ATA_INT 0x00000001 /* ATAPI intr pass-thru */
+#define IOC4_OTHER_IR_ATA_MEMERR 0x00000002 /* ATAPI DMA PCI error */
+#define IOC4_OTHER_IR_S0_MEMERR 0x00000004 /* Port 0 PCI error */
+#define IOC4_OTHER_IR_S1_MEMERR 0x00000008 /* Port 1 PCI error */
+#define IOC4_OTHER_IR_S2_MEMERR 0x00000010 /* Port 2 PCI error */
+#define IOC4_OTHER_IR_S3_MEMERR 0x00000020 /* Port 3 PCI error */
+#define IOC4_OTHER_IR_KBD_INT 0x00000040 /* Keyboard/mouse */
+#define IOC4_OTHER_IR_RESERVED 0x007fff80 /* Reserved */
+#define IOC4_OTHER_IR_RT_INT 0x00800000 /* INT_OUT section output */
+#define IOC4_OTHER_IR_GEN_INT 0xff000000 /* Generic pins */
+
+#define IOC4_OTHER_IR_SER_MEMERR (IOC4_OTHER_IR_S0_MEMERR | IOC4_OTHER_IR_S1_MEMERR | \
+ IOC4_OTHER_IR_S2_MEMERR | IOC4_OTHER_IR_S3_MEMERR)
/* Bitmasks for IOC4_SIO_CR */
#define IOC4_SIO_CR_CMD_PULSE_SHIFT 0 /* byte bus strobe shift */
@@ -274,70 +281,24 @@ struct ioc4_uartregs {
#define i4u_dlm u2.dlm
#define i4u_fcr u3.fcr
-/* PCI memory space register map addressed using pci_bar0 */
-struct ioc4_memregs {
- struct ioc4_mem {
- /* Miscellaneous IOC4 registers */
- uint32_t pci_err_addr_l;
- uint32_t pci_err_addr_h;
- uint32_t sio_ir;
- uint32_t other_ir;
-
- /* These registers are read-only for general kernel code. */
- uint32_t sio_ies_ro;
- uint32_t other_ies_ro;
- uint32_t sio_iec_ro;
- uint32_t other_iec_ro;
- uint32_t sio_cr;
- uint32_t misc_fill1;
- uint32_t int_out;
- uint32_t misc_fill2;
- uint32_t gpcr_s;
- uint32_t gpcr_c;
- uint32_t gpdr;
- uint32_t misc_fill3;
- uint32_t gppr_0;
- uint32_t gppr_1;
- uint32_t gppr_2;
- uint32_t gppr_3;
- uint32_t gppr_4;
- uint32_t gppr_5;
- uint32_t gppr_6;
- uint32_t gppr_7;
- } ioc4_mem;
-
- char misc_fill4[0x100 - 0x5C - 4];
-
- /* ATA/ATAP registers */
- uint32_t ata_notused[9];
- char ata_fill1[0x140 - 0x120 - 4];
- uint32_t ata_notused1[8];
- char ata_fill2[0x200 - 0x15C - 4];
-
- /* Keyboard and mouse registers */
- uint32_t km_notused[5];;
- char km_fill1[0x300 - 0x210 - 4];
-
- /* Serial port registers used for DMA serial I/O */
- struct ioc4_serial {
- uint32_t sbbr01_l;
- uint32_t sbbr01_h;
- uint32_t sbbr23_l;
- uint32_t sbbr23_h;
-
- struct ioc4_serialregs port_0;
- struct ioc4_serialregs port_1;
- struct ioc4_serialregs port_2;
- struct ioc4_serialregs port_3;
- struct ioc4_uartregs uart_0;
- struct ioc4_uartregs uart_1;
- struct ioc4_uartregs uart_2;
- struct ioc4_uartregs uart_3;
- } ioc4_serial;
-};
+/* Serial port registers used for DMA serial I/O */
+struct ioc4_serial {
+ uint32_t sbbr01_l;
+ uint32_t sbbr01_h;
+ uint32_t sbbr23_l;
+ uint32_t sbbr23_h;
+
+ struct ioc4_serialregs port_0;
+ struct ioc4_serialregs port_1;
+ struct ioc4_serialregs port_2;
+ struct ioc4_serialregs port_3;
+ struct ioc4_uartregs uart_0;
+ struct ioc4_uartregs uart_1;
+ struct ioc4_uartregs uart_2;
+ struct ioc4_uartregs uart_3;
+} ioc4_serial;
/* UART clock speed */
-#define IOC4_SER_XIN_CLK IOC4_SER_XIN_CLK_66
#define IOC4_SER_XIN_CLK_66 66666667
#define IOC4_SER_XIN_CLK_33 33333333
@@ -412,8 +373,8 @@ enum sio_proto {
| UART_LCR_WLEN7 | UART_LCR_WLEN8)
#define LCR_MASK_STOP_BITS (UART_LCR_STOP)
-#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir) & _p->ip_ienb)
-#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir)
+#define PENDING(_p) (readl(&(_p)->ip_mem->sio_ir.raw) & _p->ip_ienb)
+#define READ_SIO_IR(_p) readl(&(_p)->ip_mem->sio_ir.raw)
/* Default to 4k buffers */
#ifdef IOC4_1K_BUFFERS
@@ -447,7 +408,7 @@ struct ioc4_control {
*/
#define MAX_IOC4_INTR_ENTS (8 * sizeof(uint32_t))
struct ioc4_soft {
- struct ioc4_mem __iomem *is_ioc4_mem_addr;
+ struct ioc4_misc_regs __iomem *is_ioc4_misc_addr;
struct ioc4_serial __iomem *is_ioc4_serial_addr;
/* Each interrupt type has an entry in the array */
@@ -486,7 +447,7 @@ struct ioc4_port {
struct ioc4_soft *ip_ioc4_soft;
/* pci mem addresses */
- struct ioc4_mem __iomem *ip_mem;
+ struct ioc4_misc_regs __iomem *ip_mem;
struct ioc4_serial __iomem *ip_serial;
struct ioc4_serialregs __iomem *ip_serial_regs;
struct ioc4_uartregs __iomem *ip_uart_regs;
@@ -553,7 +514,7 @@ struct hooks {
uint32_t intr_dma_error;
uint32_t intr_clear;
uint32_t intr_all;
- char rs422_select_pin;
+ int rs422_select_pin;
};
static struct hooks hooks_array[IOC4_NUM_SERIAL_PORTS] = {
@@ -669,7 +630,7 @@ static void handle_intr(void *arg, uint32_t sio_ir);
static inline void
write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
{
- struct ioc4_mem __iomem *mem = ioc4_soft->is_ioc4_mem_addr;
+ struct ioc4_misc_regs __iomem *mem = ioc4_soft->is_ioc4_misc_addr;
unsigned long flags;
spin_lock_irqsave(&ioc4_soft->is_ir_lock, flags);
@@ -678,11 +639,11 @@ write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
case IOC4_SIO_INTR_TYPE:
switch (which) {
case IOC4_W_IES:
- writel(val, &mem->sio_ies_ro);
+ writel(val, &mem->sio_ies.raw);
break;
case IOC4_W_IEC:
- writel(val, &mem->sio_iec_ro);
+ writel(val, &mem->sio_iec.raw);
break;
}
break;
@@ -690,11 +651,11 @@ write_ireg(struct ioc4_soft *ioc4_soft, uint32_t val, int which, int type)
case IOC4_OTHER_INTR_TYPE:
switch (which) {
case IOC4_W_IES:
- writel(val, &mem->other_ies_ro);
+ writel(val, &mem->other_ies.raw);
break;
case IOC4_W_IEC:
- writel(val, &mem->other_iec_ro);
+ writel(val, &mem->other_iec.raw);
break;
}
break;
@@ -747,7 +708,8 @@ static int set_baud(struct ioc4_port *port, int baud)
*/
static struct ioc4_port *get_ioc4_port(struct uart_port *the_port)
{
- struct ioc4_control *control = dev_get_drvdata(the_port->dev);
+ struct ioc4_driver_data *idd = dev_get_drvdata(the_port->dev);
+ struct ioc4_control *control = idd->idd_serial_data;
int ii;
if (control) {
@@ -782,7 +744,7 @@ static struct ioc4_port *get_ioc4_port(struct uart_port *the_port)
static inline uint32_t
pending_intrs(struct ioc4_soft *soft, int type)
{
- struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
+ struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
unsigned long flag;
uint32_t intrs = 0;
@@ -793,11 +755,11 @@ pending_intrs(struct ioc4_soft *soft, int type)
switch (type) {
case IOC4_SIO_INTR_TYPE:
- intrs = readl(&mem->sio_ir) & readl(&mem->sio_ies_ro);
+ intrs = readl(&mem->sio_ir.raw) & readl(&mem->sio_ies.raw);
break;
case IOC4_OTHER_INTR_TYPE:
- intrs = readl(&mem->other_ir) & readl(&mem->other_ies_ro);
+ intrs = readl(&mem->other_ir.raw) & readl(&mem->other_ies.raw);
/* Don't process any ATA interrupte */
intrs &= ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
@@ -826,7 +788,7 @@ static int inline port_init(struct ioc4_port *port)
/* Wait until any pending bus activity for this port has ceased */
do
- sio_cr = readl(&port->ip_mem->sio_cr);
+ sio_cr = readl(&port->ip_mem->sio_cr.raw);
while (!(sio_cr & IOC4_SIO_CR_SIO_DIAG_IDLE));
/* Finish reset sequence */
@@ -899,7 +861,7 @@ static int inline port_init(struct ioc4_port *port)
write_ireg(port->ip_ioc4_soft, hooks->intr_clear,
IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
port->ip_ienb &= ~hooks->intr_clear;
- writel(hooks->intr_clear, &port->ip_mem->sio_ir);
+ writel(hooks->intr_clear, &port->ip_mem->sio_ir.raw);
return 0;
}
@@ -918,23 +880,23 @@ static void handle_dma_error_intr(void *arg, uint32_t other_ir)
spin_lock_irqsave(&port->ip_lock, flags);
/* ACK the interrupt */
- writel(hooks->intr_dma_error, &port->ip_mem->other_ir);
+ writel(hooks->intr_dma_error, &port->ip_mem->other_ir.raw);
- if (readl(&port->ip_mem->pci_err_addr_l) & IOC4_PCI_ERR_ADDR_VLD) {
+ if (readl(&port->ip_mem->pci_err_addr_l.raw) & IOC4_PCI_ERR_ADDR_VLD) {
printk(KERN_ERR
"PCI error address is 0x%lx, "
"master is serial port %c %s\n",
(((uint64_t)readl(&port->ip_mem->pci_err_addr_h)
<< 32)
- | readl(&port->ip_mem->pci_err_addr_l))
+ | readl(&port->ip_mem->pci_err_addr_l.raw))
& IOC4_PCI_ERR_ADDR_ADDR_MSK, '1' +
- ((char)(readl(&port->ip_mem-> pci_err_addr_l) &
+ ((char)(readl(&port->ip_mem->pci_err_addr_l.raw) &
IOC4_PCI_ERR_ADDR_MST_NUM_MSK) >> 1),
- (readl(&port->ip_mem->pci_err_addr_l)
+ (readl(&port->ip_mem->pci_err_addr_l.raw)
& IOC4_PCI_ERR_ADDR_MST_TYP_MSK)
? "RX" : "TX");
- if (readl(&port->ip_mem->pci_err_addr_l)
+ if (readl(&port->ip_mem->pci_err_addr_l.raw)
& IOC4_PCI_ERR_ADDR_MUL_ERR) {
printk(KERN_ERR
"Multiple errors occurred\n");
@@ -1018,26 +980,26 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
"other_ies = 0x%x\n",
(intr_type == IOC4_SIO_INTR_TYPE) ? "sio" :
"other", this_ir,
- readl(&soft->is_ioc4_mem_addr->sio_ir),
- readl(&soft->is_ioc4_mem_addr->sio_ies_ro),
- readl(&soft->is_ioc4_mem_addr->other_ir),
- readl(&soft->is_ioc4_mem_addr->other_ies_ro));
+ readl(&soft->is_ioc4_misc_addr->sio_ir.raw),
+ readl(&soft->is_ioc4_misc_addr->sio_ies.raw),
+ readl(&soft->is_ioc4_misc_addr->other_ir.raw),
+ readl(&soft->is_ioc4_misc_addr->other_ies.raw));
}
}
#ifdef DEBUG_INTERRUPTS
{
- struct ioc4_mem __iomem *mem = soft->is_ioc4_mem_addr;
+ struct ioc4_misc_regs __iomem *mem = soft->is_ioc4_misc_addr;
spinlock_t *lp = &soft->is_ir_lock;
unsigned long flag;
spin_lock_irqsave(&soft->is_ir_lock, flag);
- printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies_ro 0x%x "
- "other_ir 0x%x other_ies_ro 0x%x mask 0x%x\n",
+ printk ("%s : %d : mem 0x%p sio_ir 0x%x sio_ies 0x%x "
+ "other_ir 0x%x other_ies 0x%x mask 0x%x\n",
__FUNCTION__, __LINE__,
- (void *)mem, readl(&mem->sio_ir),
- readl(&mem->sio_ies_ro),
- readl(&mem->other_ir),
- readl(&mem->other_ies_ro),
+ (void *)mem, readl(&mem->sio_ir.raw),
+ readl(&mem->sio_ies.raw),
+ readl(&mem->other_ir.raw),
+ readl(&mem->other_ies.raw),
IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR);
spin_unlock_irqrestore(&soft->is_ir_lock, flag);
}
@@ -1049,21 +1011,20 @@ static irqreturn_t ioc4_intr(int irq, void *arg, struct pt_regs *regs)
* ioc4_attach_local - Device initialization.
* Called at *_attach() time for each
* IOC4 with serial ports in the system.
- * @control: ioc4_control ptr
- * @pdev: PCI handle for this device
- * @soft: soft struct for this device
- * @ioc4: ioc4 mem space
+ * @idd: Master module data for this IOC4
*/
-static int inline ioc4_attach_local(struct pci_dev *pdev,
- struct ioc4_control *control,
- struct ioc4_soft *soft, void __iomem *ioc4_mem,
- void __iomem *ioc4_serial)
+static int inline ioc4_attach_local(struct ioc4_driver_data *idd)
{
struct ioc4_port *port;
struct ioc4_port *ports[IOC4_NUM_SERIAL_PORTS];
int port_number;
uint16_t ioc4_revid_min = 62;
uint16_t ioc4_revid;
+ struct pci_dev *pdev = idd->idd_pdev;
+ struct ioc4_control* control = idd->idd_serial_data;
+ struct ioc4_soft *soft = control->ic_soft;
+ void __iomem *ioc4_misc = idd->idd_misc_regs;
+ void __iomem *ioc4_serial = soft->is_ioc4_serial_addr;
/* IOC4 firmware must be at least rev 62 */
pci_read_config_word(pdev, PCI_COMMAND_SPECIAL, &ioc4_revid);
@@ -1076,7 +1037,7 @@ static int inline ioc4_attach_local(struct pci_dev *pdev,
ioc4_revid, ioc4_revid_min);
return -EPERM;
}
- BUG_ON(ioc4_mem == NULL);
+ BUG_ON(ioc4_misc == NULL);
BUG_ON(ioc4_serial == NULL);
/* Create port structures for each port */
@@ -1100,10 +1061,18 @@ static int inline ioc4_attach_local(struct pci_dev *pdev,
port->ip_ioc4_soft = soft;
port->ip_pdev = pdev;
port->ip_ienb = 0;
- port->ip_pci_bus_speed = IOC4_SER_XIN_CLK;
+ /* Use baud rate calculations based on detected PCI
+ * bus speed. Simply test whether the PCI clock is
+ * running closer to 66MHz or 33MHz.
+ */
+ if (idd->count_period/IOC4_EXTINT_COUNT_DIVISOR < 20) {
+ port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_66;
+ } else {
+ port->ip_pci_bus_speed = IOC4_SER_XIN_CLK_33;
+ }
port->ip_baud = 9600;
port->ip_control = control;
- port->ip_mem = ioc4_mem;
+ port->ip_mem = ioc4_misc;
port->ip_serial = ioc4_serial;
/* point to the right hook */
@@ -1604,14 +1573,12 @@ static int ioc4_set_proto(struct ioc4_port *port, enum sio_proto proto)
switch (proto) {
case PROTO_RS232:
/* Clear the appropriate GIO pin */
- writel(0, (&port->ip_mem->gppr_0 +
- hooks->rs422_select_pin));
+ writel(0, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
break;
case PROTO_RS422:
/* Set the appropriate GIO pin */
- writel(1, (&port->ip_mem->gppr_0 +
- hooks->rs422_select_pin));
+ writel(1, (&port->ip_mem->gppr[hooks->rs422_select_pin].raw));
break;
default:
@@ -1885,7 +1852,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
if (sio_ir & hooks->intr_delta_dcd) {
/* ACK the interrupt */
writel(hooks->intr_delta_dcd,
- &port->ip_mem->sio_ir);
+ &port->ip_mem->sio_ir.raw);
shadow = readl(&port->ip_serial_regs->shadow);
@@ -1907,7 +1874,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
if (sio_ir & hooks->intr_delta_cts) {
/* ACK the interrupt */
writel(hooks->intr_delta_cts,
- &port->ip_mem->sio_ir);
+ &port->ip_mem->sio_ir.raw);
shadow = readl(&port->ip_serial_regs->shadow);
@@ -1928,7 +1895,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
if (sio_ir & hooks->intr_rx_timer) {
/* ACK the interrupt */
writel(hooks->intr_rx_timer,
- &port->ip_mem->sio_ir);
+ &port->ip_mem->sio_ir.raw);
if ((port->ip_notify & N_DATA_READY)
&& (port->ip_port)) {
@@ -1974,7 +1941,7 @@ static void handle_intr(void *arg, uint32_t sio_ir)
/* ACK the interrupt */
writel(hooks->intr_tx_explicit,
- &port->ip_mem->sio_ir);
+ &port->ip_mem->sio_ir.raw);
if (port->ip_notify & N_OUTPUT_LOWAT)
ioc4_cb_output_lowat(port);
@@ -2634,7 +2601,8 @@ ioc4_serial_core_attach(struct pci_dev *pdev)
{
struct ioc4_port *port;
struct uart_port *the_port;
- struct ioc4_control *control = pci_get_drvdata(pdev);
+ struct ioc4_driver_data *idd = pci_get_drvdata(pdev);
+ struct ioc4_control *control = idd->idd_serial_data;
int ii;
DPRINT_CONFIG(("%s: attach pdev 0x%p - control 0x%p\n",
@@ -2680,55 +2648,29 @@ ioc4_serial_core_attach(struct pci_dev *pdev)
/**
* ioc4_serial_attach_one - register attach function
- * called per card found from ioc4_serial_detect as part
- * of module_init().
- * @pdev: handle for this card
- * @pci_id: pci id for this card
+ * called per card found from IOC4 master module.
+ * @idd: Master module data for this IOC4
*/
int
-ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
+ioc4_serial_attach_one(struct ioc4_driver_data *idd)
{
- struct ioc4_mem __iomem *mem;
- unsigned long tmp_addr, tmp_addr1;
+ unsigned long tmp_addr1;
struct ioc4_serial __iomem *serial;
struct ioc4_soft *soft;
struct ioc4_control *control;
- int tmp, ret = 0;
+ int ret = 0;
- DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, pdev, pci_id));
-
- /* Map in the ioc4 memory */
- tmp_addr = pci_resource_start(pdev, 0);
- if (!tmp_addr) {
- printk(KERN_WARNING
- "ioc4 (%p) : unable to get PIO mapping for "
- "MEM space\n", (void *)pdev);
- return -ENODEV;
- }
- if (!request_region(tmp_addr, sizeof(struct ioc4_mem), "sioc4_mem")) {
- printk(KERN_ALERT
- "ioc4 (%p): unable to get request region for "
- "MEM space\n", (void *)pdev);
- return -ENODEV;
- }
- mem = ioremap(tmp_addr, sizeof(struct ioc4_mem));
- if (!mem) {
- printk(KERN_WARNING
- "ioc4 (%p) : unable to remap ioc4 memory\n",
- (void *)pdev);
- ret = -ENODEV;
- goto out1;
- }
+ DPRINT_CONFIG(("%s (0x%p, 0x%p)\n", __FUNCTION__, idd->idd_pdev, idd->idd_pci_id));
/* request serial registers */
- tmp_addr1 = pci_resource_start(pdev, 0) + IOC4_SERIAL_OFFSET;
+ tmp_addr1 = idd->idd_bar0 + IOC4_SERIAL_OFFSET;
if (!request_region(tmp_addr1, sizeof(struct ioc4_serial),
"sioc4_uart")) {
printk(KERN_WARNING
"ioc4 (%p): unable to get request region for "
- "uart space\n", (void *)pdev);
+ "uart space\n", (void *)idd->idd_pdev);
ret = -ENODEV;
goto out1;
}
@@ -2736,12 +2678,12 @@ ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
if (!serial) {
printk(KERN_WARNING
"ioc4 (%p) : unable to remap ioc4 serial register\n",
- (void *)pdev);
+ (void *)idd->idd_pdev);
ret = -ENODEV;
goto out2;
}
DPRINT_CONFIG(("%s : mem 0x%p, serial 0x%p\n",
- __FUNCTION__, (void *)mem, (void *)serial));
+ __FUNCTION__, (void *)idd->idd_misc_regs, (void *)serial));
/* Get memory for the new card */
control = kmalloc(sizeof(struct ioc4_control) * IOC4_NUM_SERIAL_PORTS,
@@ -2754,59 +2696,56 @@ ioc4_serial_attach_one(struct pci_dev *pdev, const struct pci_device_id *pci_id)
goto out2;
}
memset(control, 0, sizeof(struct ioc4_control));
- pci_set_drvdata(pdev, control);
+ idd->idd_serial_data = control;
/* Allocate the soft structure */
soft = kmalloc(sizeof(struct ioc4_soft), GFP_KERNEL);
if (!soft) {
printk(KERN_WARNING
"ioc4 (%p): unable to get memory for the soft struct\n",
- (void *)pdev);
+ (void *)idd->idd_pdev);
ret = -ENOMEM;
goto out3;
}
memset(soft, 0, sizeof(struct ioc4_soft));
spin_lock_init(&soft->is_ir_lock);
- soft->is_ioc4_mem_addr = mem;
+ soft->is_ioc4_misc_addr = idd->idd_misc_regs;
soft->is_ioc4_serial_addr = serial;
/* Init the IOC4 */
- pci_read_config_dword(pdev, PCI_COMMAND, &tmp);
- pci_write_config_dword(pdev, PCI_COMMAND,
- tmp | PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
-
- writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT, &mem->sio_cr);
+ writel(0xf << IOC4_SIO_CR_CMD_PULSE_SHIFT,
+ &idd->idd_misc_regs->sio_cr.raw);
/* Enable serial port mode select generic PIO pins as outputs */
writel(IOC4_GPCR_UART0_MODESEL | IOC4_GPCR_UART1_MODESEL
| IOC4_GPCR_UART2_MODESEL | IOC4_GPCR_UART3_MODESEL,
- &mem->gpcr_s);
+ &idd->idd_misc_regs->gpcr_s.raw);
- /* Clear and disable all interrupts */
+ /* Clear and disable all serial interrupts */
write_ireg(soft, ~0, IOC4_W_IEC, IOC4_SIO_INTR_TYPE);
- writel(~0, &mem->sio_ir);
- write_ireg(soft, ~(IOC4_OTHER_IR_ATA_INT | IOC4_OTHER_IR_ATA_MEMERR),
- IOC4_W_IEC, IOC4_OTHER_INTR_TYPE);
- writel(~(IOC4_OTHER_IR_ATA_MEMERR | IOC4_OTHER_IR_ATA_MEMERR),
- &mem->other_ir);
+ writel(~0, &idd->idd_misc_regs->sio_ir.raw);
+ write_ireg(soft, IOC4_OTHER_IR_SER_MEMERR, IOC4_W_IEC,
+ IOC4_OTHER_INTR_TYPE);
+ writel(IOC4_OTHER_IR_SER_MEMERR, &idd->idd_misc_regs->other_ir.raw);
control->ic_soft = soft;
- if (!request_irq(pdev->irq, ioc4_intr, SA_SHIRQ,
+
+ /* Hook up interrupt handler */
+ if (!request_irq(idd->idd_pdev->irq, ioc4_intr, SA_SHIRQ,
"sgi-ioc4serial", (void *)soft)) {
- control->ic_irq = pdev->irq;
+ control->ic_irq = idd->idd_pdev->irq;
} else {
printk(KERN_WARNING
"%s : request_irq fails for IRQ 0x%x\n ",
- __FUNCTION__, pdev->irq);
+ __FUNCTION__, idd->idd_pdev->irq);
}
- if ((ret = ioc4_attach_local(pdev, control, soft,
- soft->is_ioc4_mem_addr,
- soft->is_ioc4_serial_addr)))
+ ret = ioc4_attach_local(idd);
+ if (ret)
goto out4;
/* register port with the serial core */
- if ((ret = ioc4_serial_core_attach(pdev)))
+ if ((ret = ioc4_serial_core_attach(idd->idd_pdev)))
goto out4;
return ret;
@@ -2819,7 +2758,6 @@ out3:
out2:
release_region(tmp_addr1, sizeof(struct ioc4_serial));
out1:
- release_region(tmp_addr, sizeof(struct ioc4_mem));
return ret;
}
@@ -2828,11 +2766,10 @@ out1:
/**
* ioc4_serial_remove_one - detach function
*
- * @pdev: handle for this card
+ * @idd: IOC4 master module data for this IOC4
*/
-#if 0
-void ioc4_serial_remove_one(struct pci_dev *pdev)
+int ioc4_serial_remove_one(struct ioc4_driver_data *idd)
{
int ii;
struct ioc4_control *control;
@@ -2840,7 +2777,7 @@ void ioc4_serial_remove_one(struct pci_dev *pdev)
struct ioc4_port *port;
struct ioc4_soft *soft;
- control = pci_get_drvdata(pdev);
+ control = idd->idd_serial_data;
for (ii = 0; ii < IOC4_NUM_SERIAL_PORTS; ii++) {
the_port = &control->ic_port[ii].icp_uart_port;
@@ -2867,10 +2804,17 @@ void ioc4_serial_remove_one(struct pci_dev *pdev)
kfree(soft);
}
kfree(control);
- pci_set_drvdata(pdev, NULL);
- uart_unregister_driver(&ioc4_uart);
+ idd->idd_serial_data = NULL;
+
+ return 0;
}
-#endif
+
+static struct ioc4_submodule ioc4_serial_submodule = {
+ .is_name = "IOC4_serial",
+ .is_owner = THIS_MODULE,
+ .is_probe = ioc4_serial_attach_one,
+ .is_remove = ioc4_serial_remove_one,
+};
/**
* ioc4_serial_init - module init
@@ -2886,12 +2830,20 @@ int ioc4_serial_init(void)
__FUNCTION__);
return ret;
}
- return 0;
+
+ /* register with IOC4 main module */
+ return ioc4_register_submodule(&ioc4_serial_submodule);
+}
+
+static void __devexit ioc4_serial_exit(void)
+{
+ ioc4_unregister_submodule(&ioc4_serial_submodule);
+ uart_unregister_driver(&ioc4_uart);
}
+module_init(ioc4_serial_init);
+module_exit(ioc4_serial_exit);
+
MODULE_AUTHOR("Pat Gefre - Silicon Graphics Inc. (SGI) <pfg@sgi.com>");
MODULE_DESCRIPTION("Serial PCI driver module for SGI IOC4 Base-IO Card");
MODULE_LICENSE("GPL");
-
-EXPORT_SYMBOL(ioc4_serial_init);
-EXPORT_SYMBOL(ioc4_serial_attach_one);
diff --git a/drivers/serial/pxa.c b/drivers/serial/pxa.c
index 51d8a49f4477..9dc151d8fa61 100644
--- a/drivers/serial/pxa.c
+++ b/drivers/serial/pxa.c
@@ -161,20 +161,12 @@ receive_chars(struct uart_pxa_port *up, int *status, struct pt_regs *regs)
else if (*status & UART_LSR_FE)
flag = TTY_FRAME;
}
+
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((*status & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((*status & UART_LSR_OE) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, *status, UART_LSR_OE, ch, flag);
+
ignore_char:
*status = serial_in(up, UART_LSR);
} while ((*status & UART_LSR_DR) && (max_count-- > 0));
diff --git a/drivers/serial/s3c2410.c b/drivers/serial/s3c2410.c
index 435750d40a47..2a9f7ade2c9d 100644
--- a/drivers/serial/s3c2410.c
+++ b/drivers/serial/s3c2410.c
@@ -394,20 +394,7 @@ s3c24xx_serial_rx_chars(int irq, void *dev_id, struct pt_regs *regs)
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((uerstat & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
-
- if ((uerstat & S3C2410_UERSTAT_OVERRUN) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
-
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, uerstat, S3C2410_UERSTAT_OVERRUN, ch, flag);
ignore_char:
continue;
diff --git a/drivers/serial/sa1100.c b/drivers/serial/sa1100.c
index 157218bc6c6f..98641c3f5ab9 100644
--- a/drivers/serial/sa1100.c
+++ b/drivers/serial/sa1100.c
@@ -197,7 +197,7 @@ static void
sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs)
{
struct tty_struct *tty = sport->port.info->tty;
- unsigned int status, ch, flg, ignored = 0;
+ unsigned int status, ch, flg;
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
UTSR0_TO_SM(UART_GET_UTSR0(sport));
@@ -237,10 +237,7 @@ sa1100_rx_chars(struct sa1100_port *sport, struct pt_regs *regs)
if (uart_handle_sysrq_char(&sport->port, ch, regs))
goto ignore_char;
- if ((status & port->ignore_status_mask & ~UTSR1_TO_SM(UTSR1_ROR)) == 0)
- tty_insert_flip_char(tty, ch, flg);
- if (status & ~port->ignore_status_mask & UTSR1_TO_SM(UTSR1_ROR))
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ uart_insert_char(&sport->port, status, UTSR1_TO_SM(UTSR1_ROR), ch, flg);
ignore_char:
status = UTSR1_TO_SM(UART_GET_UTSR1(sport)) |
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 6eeb48f6a482..0d7b65f93e8d 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -661,10 +661,10 @@ void serial_config(dev_link_t * link)
/* Is this a multiport card? */
tuple->DesiredTuple = CISTPL_MANFID;
if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
- info->manfid = le16_to_cpu(buf[0]);
+ info->manfid = parse->manfid.manf;
for (i = 0; i < MULTI_COUNT; i++)
if ((info->manfid == multi_id[i].manfid) &&
- (le16_to_cpu(buf[1]) == multi_id[i].prodid))
+ (parse->manfid.card == multi_id[i].prodid))
break;
if (i < MULTI_COUNT)
info->multi = multi_id[i].multi;
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
index 85cfa08d3bad..56f269b6bfb1 100644
--- a/drivers/serial/serial_lh7a40x.c
+++ b/drivers/serial/serial_lh7a40x.c
@@ -190,18 +190,7 @@ lh7a40xuart_rx_chars (struct uart_port* port)
if (uart_handle_sysrq_char (port, (unsigned char) data, regs))
continue;
- if ((data & port->ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, data, flag);
- }
- if ((data & RxOverrunError)
- && tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+ uart_insert_char(port, data, RxOverrunError, data, flag);
}
tty_flip_buffer_push (tty);
return;
diff --git a/drivers/serial/serial_txx9.c b/drivers/serial/serial_txx9.c
index 37b2ef297cbe..3f1051a4a13f 100644
--- a/drivers/serial/serial_txx9.c
+++ b/drivers/serial/serial_txx9.c
@@ -350,18 +350,9 @@ receive_chars(struct uart_txx9_port *up, unsigned int *status, struct pt_regs *r
}
if (uart_handle_sysrq_char(&up->port, ch, regs))
goto ignore_char;
- if ((disr & up->port.ignore_status_mask) == 0) {
- tty_insert_flip_char(tty, ch, flag);
- }
- if ((disr & TXX9_SIDISR_UOER) &&
- tty->flip.count < TTY_FLIPBUF_SIZE) {
- /*
- * Overrun is special, since it's reported
- * immediately, and doesn't affect the current
- * character.
- */
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
- }
+
+ uart_insert_char(&up->port, disr, TXX9_SIDISR_UOER, ch, flag);
+
ignore_char:
disr = sio_in(up, TXX9_SIDISR);
} while (!(disr & TXX9_SIDISR_UVALID) && (max_count-- > 0));
diff --git a/drivers/serial/sunsab.c b/drivers/serial/sunsab.c
index 39b788d95e39..10e2990a40d4 100644
--- a/drivers/serial/sunsab.c
+++ b/drivers/serial/sunsab.c
@@ -61,6 +61,16 @@ struct uart_sunsab_port {
unsigned char pvr_dtr_bit; /* Which PVR bit is DTR */
unsigned char pvr_dsr_bit; /* Which PVR bit is DSR */
int type; /* SAB82532 version */
+
+ /* Setting configuration bits while the transmitter is active
+ * can cause garbage characters to get emitted by the chip.
+ * Therefore, we cache such writes here and do the real register
+ * write the next time the transmitter becomes idle.
+ */
+ unsigned int cached_ebrg;
+ unsigned char cached_mode;
+ unsigned char cached_pvr;
+ unsigned char cached_dafo;
};
/*
@@ -236,6 +246,7 @@ receive_chars(struct uart_sunsab_port *up,
}
static void sunsab_stop_tx(struct uart_port *, unsigned int);
+static void sunsab_tx_idle(struct uart_sunsab_port *);
static void transmit_chars(struct uart_sunsab_port *up,
union sab82532_irq_status *stat)
@@ -258,6 +269,7 @@ static void transmit_chars(struct uart_sunsab_port *up,
return;
set_bit(SAB82532_XPR, &up->irqflags);
+ sunsab_tx_idle(up);
if (uart_circ_empty(xmit) || uart_tx_stopped(&up->port)) {
up->interrupt_mask1 |= SAB82532_IMR1_XPR;
@@ -397,21 +409,21 @@ static void sunsab_set_mctrl(struct uart_port *port, unsigned int mctrl)
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
if (mctrl & TIOCM_RTS) {
- writeb(readb(&up->regs->rw.mode) & ~SAB82532_MODE_FRTS,
- &up->regs->rw.mode);
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
- &up->regs->rw.mode);
+ up->cached_mode &= ~SAB82532_MODE_FRTS;
+ up->cached_mode |= SAB82532_MODE_RTS;
} else {
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
- &up->regs->rw.mode);
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
- &up->regs->rw.mode);
+ up->cached_mode |= (SAB82532_MODE_FRTS |
+ SAB82532_MODE_RTS);
}
if (mctrl & TIOCM_DTR) {
- writeb(readb(&up->regs->rw.pvr) & ~(up->pvr_dtr_bit), &up->regs->rw.pvr);
+ up->cached_pvr &= ~(up->pvr_dtr_bit);
} else {
- writeb(readb(&up->regs->rw.pvr) | up->pvr_dtr_bit, &up->regs->rw.pvr);
+ up->cached_pvr |= up->pvr_dtr_bit;
}
+
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
}
/* port->lock is not held. */
@@ -450,6 +462,25 @@ static void sunsab_stop_tx(struct uart_port *port, unsigned int tty_stop)
}
/* port->lock held by caller. */
+static void sunsab_tx_idle(struct uart_sunsab_port *up)
+{
+ if (test_bit(SAB82532_REGS_PENDING, &up->irqflags)) {
+ u8 tmp;
+
+ clear_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ writeb(up->cached_mode, &up->regs->rw.mode);
+ writeb(up->cached_pvr, &up->regs->rw.pvr);
+ writeb(up->cached_dafo, &up->regs->w.dafo);
+
+ writeb(up->cached_ebrg & 0xff, &up->regs->w.bgr);
+ tmp = readb(&up->regs->rw.ccr2);
+ tmp &= ~0xc0;
+ tmp |= (up->cached_ebrg >> 2) & 0xc0;
+ writeb(tmp, &up->regs->rw.ccr2);
+ }
+}
+
+/* port->lock held by caller. */
static void sunsab_start_tx(struct uart_port *port, unsigned int tty_start)
{
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
@@ -517,12 +548,16 @@ static void sunsab_break_ctl(struct uart_port *port, int break_state)
spin_lock_irqsave(&up->port.lock, flags);
- val = readb(&up->regs->rw.dafo);
+ val = up->cached_dafo;
if (break_state)
val |= SAB82532_DAFO_XBRK;
else
val &= ~SAB82532_DAFO_XBRK;
- writeb(val, &up->regs->rw.dafo);
+ up->cached_dafo = val;
+
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
spin_unlock_irqrestore(&up->port.lock, flags);
}
@@ -566,8 +601,9 @@ static int sunsab_startup(struct uart_port *port)
SAB82532_CCR2_TOE, &up->regs->w.ccr2);
writeb(0, &up->regs->w.ccr3);
writeb(SAB82532_CCR4_MCK4 | SAB82532_CCR4_EBRG, &up->regs->w.ccr4);
- writeb(SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
- SAB82532_MODE_RAC, &up->regs->w.mode);
+ up->cached_mode = (SAB82532_MODE_RTS | SAB82532_MODE_FCTS |
+ SAB82532_MODE_RAC);
+ writeb(up->cached_mode, &up->regs->w.mode);
writeb(SAB82532_RFC_DPS|SAB82532_RFC_RFTH_32, &up->regs->w.rfc);
tmp = readb(&up->regs->rw.ccr0);
@@ -598,7 +634,6 @@ static void sunsab_shutdown(struct uart_port *port)
{
struct uart_sunsab_port *up = (struct uart_sunsab_port *) port;
unsigned long flags;
- unsigned char tmp;
spin_lock_irqsave(&up->port.lock, flags);
@@ -609,14 +644,13 @@ static void sunsab_shutdown(struct uart_port *port)
writeb(up->interrupt_mask1, &up->regs->w.imr1);
/* Disable break condition */
- tmp = readb(&up->regs->rw.dafo);
- tmp &= ~SAB82532_DAFO_XBRK;
- writeb(tmp, &up->regs->rw.dafo);
+ up->cached_dafo = readb(&up->regs->rw.dafo);
+ up->cached_dafo &= ~SAB82532_DAFO_XBRK;
+ writeb(up->cached_dafo, &up->regs->rw.dafo);
/* Disable Receiver */
- tmp = readb(&up->regs->rw.mode);
- tmp &= ~SAB82532_MODE_RAC;
- writeb(tmp, &up->regs->rw.mode);
+ up->cached_mode &= ~SAB82532_MODE_RAC;
+ writeb(up->cached_mode, &up->regs->rw.mode);
/*
* XXX FIXME
@@ -685,7 +719,6 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla
unsigned int iflag, unsigned int baud,
unsigned int quot)
{
- unsigned int ebrg;
unsigned char dafo;
int bits, n, m;
@@ -714,10 +747,11 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla
} else {
dafo |= SAB82532_DAFO_PAR_EVEN;
}
+ up->cached_dafo = dafo;
calc_ebrg(baud, &n, &m);
- ebrg = n | (m << 6);
+ up->cached_ebrg = n | (m << 6);
up->tec_timeout = (10 * 1000000) / baud;
up->cec_timeout = up->tec_timeout >> 2;
@@ -770,16 +804,13 @@ static void sunsab_convert_to_sab(struct uart_sunsab_port *up, unsigned int cfla
uart_update_timeout(&up->port, cflag,
(up->port.uartclk / (16 * quot)));
- /* Now bang the new settings into the chip. */
- sunsab_cec_wait(up);
- sunsab_tec_wait(up);
- writeb(dafo, &up->regs->w.dafo);
- writeb(ebrg & 0xff, &up->regs->w.bgr);
- writeb((readb(&up->regs->rw.ccr2) & ~0xc0) | ((ebrg >> 2) & 0xc0),
- &up->regs->rw.ccr2);
-
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RAC, &up->regs->rw.mode);
-
+ /* Now schedule a register update when the chip's
+ * transmitter is idle.
+ */
+ up->cached_mode |= SAB82532_MODE_RAC;
+ set_bit(SAB82532_REGS_PENDING, &up->irqflags);
+ if (test_bit(SAB82532_XPR, &up->irqflags))
+ sunsab_tx_idle(up);
}
/* port->lock is not held. */
@@ -1084,11 +1115,13 @@ static void __init sunsab_init_hw(void)
up->pvr_dsr_bit = (1 << 3);
up->pvr_dtr_bit = (1 << 2);
}
- writeb((1 << 1) | (1 << 2) | (1 << 4), &up->regs->w.pvr);
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_FRTS,
- &up->regs->rw.mode);
- writeb(readb(&up->regs->rw.mode) | SAB82532_MODE_RTS,
- &up->regs->rw.mode);
+ up->cached_pvr = (1 << 1) | (1 << 2) | (1 << 4);
+ writeb(up->cached_pvr, &up->regs->w.pvr);
+ up->cached_mode = readb(&up->regs->rw.mode);
+ up->cached_mode |= SAB82532_MODE_FRTS;
+ writeb(up->cached_mode, &up->regs->rw.mode);
+ up->cached_mode |= SAB82532_MODE_RTS;
+ writeb(up->cached_mode, &up->regs->rw.mode);
up->tec_timeout = SAB82532_MAX_TEC_TIMEOUT;
up->cec_timeout = SAB82532_MAX_CEC_TIMEOUT;
diff --git a/drivers/serial/sunsab.h b/drivers/serial/sunsab.h
index 686086fcbbf5..b78e1f7b8050 100644
--- a/drivers/serial/sunsab.h
+++ b/drivers/serial/sunsab.h
@@ -126,6 +126,7 @@ union sab82532_irq_status {
/* irqflags bits */
#define SAB82532_ALLS 0x00000001
#define SAB82532_XPR 0x00000002
+#define SAB82532_REGS_PENDING 0x00000004
/* RFIFO Status Byte */
#define SAB82532_RSTAT_PE 0x80
diff --git a/drivers/serial/vr41xx_siu.c b/drivers/serial/vr41xx_siu.c
index 307886199f2f..1f985327b0d4 100644
--- a/drivers/serial/vr41xx_siu.c
+++ b/drivers/serial/vr41xx_siu.c
@@ -234,7 +234,7 @@ static inline const char *siu_type_name(struct uart_port *port)
return "DSIU";
}
- return "unknown";
+ return NULL;
}
static unsigned int siu_tx_empty(struct uart_port *port)
@@ -412,10 +412,8 @@ static inline void receive_chars(struct uart_port *port, uint8_t *status,
if (uart_handle_sysrq_char(port, ch, regs))
goto ignore_char;
- if ((lsr & port->ignore_status_mask) == 0)
- tty_insert_flip_char(tty, ch, flag);
- if ((lsr & UART_LSR_OE) && (tty->flip.count < TTY_FLIPBUF_SIZE))
- tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+
+ uart_insert_char(port, lsr, UART_LSR_OE, ch, flag);
ignore_char:
lsr = siu_read(port, UART_LSR);
@@ -484,9 +482,6 @@ static irqreturn_t siu_interrupt(int irq, void *dev_id, struct pt_regs *regs)
struct uart_port *port;
uint8_t iir, lsr;
- if (dev_id == NULL)
- return IRQ_NONE;
-
port = (struct uart_port *)dev_id;
iir = siu_read(port, UART_IIR);
@@ -509,6 +504,9 @@ static int siu_startup(struct uart_port *port)
{
int retval;
+ if (port->membase == NULL)
+ return -ENODEV;
+
siu_clear_fifo(port);
(void)siu_read(port, UART_LSR);
@@ -547,9 +545,6 @@ static void siu_shutdown(struct uart_port *port)
unsigned long flags;
uint8_t lcr;
- if (port->membase == NULL)
- return;
-
siu_write(port, UART_IER, 0);
spin_lock_irqsave(&port->lock, flags);
@@ -804,53 +799,6 @@ static int siu_init_ports(void)
#ifdef CONFIG_SERIAL_VR41XX_CONSOLE
-static void early_set_termios(struct uart_port *port, struct termios *new,
- struct termios *old)
-{
- tcflag_t c_cflag;
- uint8_t lcr;
- unsigned int baud, quot;
-
- c_cflag = new->c_cflag;
- switch (c_cflag & CSIZE) {
- case CS5:
- lcr = UART_LCR_WLEN5;
- break;
- case CS6:
- lcr = UART_LCR_WLEN6;
- break;
- case CS7:
- lcr = UART_LCR_WLEN7;
- break;
- default:
- lcr = UART_LCR_WLEN8;
- break;
- }
-
- if (c_cflag & CSTOPB)
- lcr |= UART_LCR_STOP;
- if (c_cflag & PARENB)
- lcr |= UART_LCR_PARITY;
- if ((c_cflag & PARODD) != PARODD)
- lcr |= UART_LCR_EPAR;
- if (c_cflag & CMSPAR)
- lcr |= UART_LCR_SPAR;
-
- baud = uart_get_baud_rate(port, new, old, 0, port->uartclk/16);
- quot = uart_get_divisor(port, baud);
-
- siu_write(port, UART_LCR, lcr | UART_LCR_DLAB);
-
- siu_write(port, UART_DLL, (uint8_t)quot);
- siu_write(port, UART_DLM, (uint8_t)(quot >> 8));
-
- siu_write(port, UART_LCR, lcr);
-}
-
-static struct uart_ops early_uart_ops = {
- .set_termios = early_set_termios,
-};
-
#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
static void wait_for_xmitr(struct uart_port *port)
@@ -917,7 +865,7 @@ static int siu_console_setup(struct console *con, char *options)
if (port->membase == NULL) {
if (port->mapbase == 0)
return -ENODEV;
- port->membase = (unsigned char __iomem *)KSEG1ADDR(port->mapbase);
+ port->membase = ioremap(port->mapbase, siu_port_size(port));
}
vr41xx_select_siu_interface(SIU_INTERFACE_RS232C);
@@ -951,7 +899,7 @@ static int __devinit siu_console_init(void)
for (i = 0; i < num; i++) {
port = &siu_uart_ports[i];
- port->ops = &early_uart_ops;
+ port->ops = &siu_uart_ops;
}
register_console(&siu_console);
@@ -996,8 +944,10 @@ static int siu_probe(struct device *dev)
port->dev = dev;
retval = uart_add_one_port(&siu_uart_driver, port);
- if (retval)
+ if (retval < 0) {
+ port->dev = NULL;
break;
+ }
}
if (i == 0 && retval < 0) {
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-16 01:56:33 +0000