4 files changed, 27 insertions, 18 deletions

diff --git a/drivers/spi/amba-pl022.c b/drivers/spi/amba-pl022.c
index da76797ce8b9..c0f950a7cbec 100644
--- a/drivers/spi/amba-pl022.c
+++ b/drivers/spi/amba-pl022.c
@@ -38,14 +38,12 @@
 #include <linux/interrupt.h>
 #include <linux/spi/spi.h>
 #include <linux/workqueue.h>
-#include <linux/errno.h>
 #include <linux/delay.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/amba/bus.h>
 #include <linux/amba/pl022.h>
 #include <linux/io.h>
-#include <linux/delay.h>
 
 /*
  * This macro is used to define some register default values.
diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c
index aa90ddb37066..8980a5640bd9 100644
--- a/drivers/spi/omap_uwire.c
+++ b/drivers/spi/omap_uwire.c
@@ -514,6 +514,8 @@ static int __init uwire_probe(struct platform_device *pdev)
 	/* the spi->mode bits understood by this driver: */
 	master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
 
+	master->flags = SPI_MASTER_HALF_DUPLEX;
+
 	master->bus_num = 2;	/* "official" */
 	master->num_chipselect = 4;
 	master->setup = uwire_setup;
diff --git a/drivers/spi/spi_bitbang.c b/drivers/spi/spi_bitbang.c
index 2a5abc08e857..f1db395dd889 100644
--- a/drivers/spi/spi_bitbang.c
+++ b/drivers/spi/spi_bitbang.c
@@ -258,6 +258,11 @@ static void bitbang_work(struct work_struct *work)
 	struct spi_bitbang	*bitbang =
 		container_of(work, struct spi_bitbang, work);
 	unsigned long		flags;
+	int			do_setup = -1;
+	int			(*setup_transfer)(struct spi_device *,
+					struct spi_transfer *);
+
+	setup_transfer = bitbang->setup_transfer;
 
 	spin_lock_irqsave(&bitbang->lock, flags);
 	bitbang->busy = 1;
@@ -269,8 +274,6 @@ static void bitbang_work(struct work_struct *work)
 		unsigned		tmp;
 		unsigned		cs_change;
 		int			status;
-		int			(*setup_transfer)(struct spi_device *,
-						struct spi_transfer *);
 
 		m = container_of(bitbang->queue.next, struct spi_message,
 				queue);
@@ -287,19 +290,19 @@ static void bitbang_work(struct work_struct *work)
 		tmp = 0;
 		cs_change = 1;
 		status = 0;
-		setup_transfer = NULL;
 
 		list_for_each_entry (t, &m->transfers, transfer_list) {
 
-			/* override or restore speed and wordsize */
-			if (t->speed_hz || t->bits_per_word) {
-				setup_transfer = bitbang->setup_transfer;
+			/* override speed or wordsize? */
+			if (t->speed_hz || t->bits_per_word)
+				do_setup = 1;
+
+			/* init (-1) or override (1) transfer params */
+			if (do_setup != 0) {
 				if (!setup_transfer) {
 					status = -ENOPROTOOPT;
 					break;
 				}
-			}
-			if (setup_transfer) {
 				status = setup_transfer(spi, t);
 				if (status < 0)
 					break;
@@ -363,9 +366,10 @@ static void bitbang_work(struct work_struct *work)
 		m->status = status;
 		m->complete(m->context);
 
-		/* restore speed and wordsize */
-		if (setup_transfer)
+		/* restore speed and wordsize if it was overridden */
+		if (do_setup == 1)
 			setup_transfer(spi, NULL);
+		do_setup = 0;
 
 		/* normally deactivate chipselect ... unless no error and
 		 * cs_change has hinted that the next message will probably
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 5d869c4d3eb2..606e7a40a8da 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -58,15 +58,20 @@ static unsigned long	minors[N_SPI_MINORS / BITS_PER_LONG];
 
 
 /* Bit masks for spi_device.mode management.  Note that incorrect
- * settings for CS_HIGH and 3WIRE can cause *lots* of trouble for other
- * devices on a shared bus:  CS_HIGH, because this device will be
- * active when it shouldn't be;  3WIRE, because when active it won't
- * behave as it should.
+ * settings for some settings can cause *lots* of trouble for other
+ * devices on a shared bus:
  *
- * REVISIT should changing those two modes be privileged?
+ *  - CS_HIGH ... this device will be active when it shouldn't be
+ *  - 3WIRE ... when active, it won't behave as it should
+ *  - NO_CS ... there will be no explicit message boundaries; this
+ *	is completely incompatible with the shared bus model
+ *  - READY ... transfers may proceed when they shouldn't.
+ *
+ * REVISIT should changing those flags be privileged?
  */
 #define SPI_MODE_MASK		(SPI_CPHA | SPI_CPOL | SPI_CS_HIGH \
-				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP)
+				| SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP \
+				| SPI_NO_CS | SPI_READY)
 
 struct spidev_data {
 	dev_t			devt;