diff options
Diffstat (limited to 'drivers/ssb')
| -rw-r--r-- | drivers/ssb/Kconfig | 9 | ||||
| -rw-r--r-- | drivers/ssb/Makefile | 1 | ||||
| -rw-r--r-- | drivers/ssb/driver_gige.c | 294 | ||||
| -rw-r--r-- | drivers/ssb/driver_mipscore.c | 1 | ||||
| -rw-r--r-- | drivers/ssb/driver_pcicore.c | 160 | ||||
| -rw-r--r-- | drivers/ssb/embedded.c | 90 | ||||
| -rw-r--r-- | drivers/ssb/main.c | 30 | ||||
| -rw-r--r-- | drivers/ssb/ssb_private.h | 2 |
8 files changed, 515 insertions, 72 deletions
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig index adea792fb675..f69ef0ba2613 100644 --- a/drivers/ssb/Kconfig +++ b/drivers/ssb/Kconfig @@ -125,4 +125,13 @@ config SSB_DRIVER_EXTIF If unsure, say N +config SSB_DRIVER_GIGE + bool "SSB Broadcom Gigabit Ethernet driver" + depends on SSB_PCIHOST_POSSIBLE && SSB_EMBEDDED && MIPS + help + Driver for the Sonics Silicon Backplane attached + Broadcom Gigabit Ethernet. + + If unsure, say N + endmenu diff --git a/drivers/ssb/Makefile b/drivers/ssb/Makefile index de94c2eb7a37..910f35e32fc9 100644 --- a/drivers/ssb/Makefile +++ b/drivers/ssb/Makefile @@ -11,6 +11,7 @@ ssb-y += driver_chipcommon.o ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o +ssb-$(CONFIG_SSB_DRIVER_GIGE) += driver_gige.o # b43 pci-ssb-bridge driver # Not strictly a part of SSB, but kept here for convenience diff --git a/drivers/ssb/driver_gige.c b/drivers/ssb/driver_gige.c new file mode 100644 index 000000000000..172f90407b93 --- /dev/null +++ b/drivers/ssb/driver_gige.c @@ -0,0 +1,294 @@ +/* + * Sonics Silicon Backplane + * Broadcom Gigabit Ethernet core driver + * + * Copyright 2008, Broadcom Corporation + * Copyright 2008, Michael Buesch <mb@bu3sch.de> + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include <linux/ssb/ssb.h> +#include <linux/ssb/ssb_driver_gige.h> +#include <linux/pci.h> +#include <linux/pci_regs.h> + + +/* +MODULE_DESCRIPTION("SSB Broadcom Gigabit Ethernet driver"); +MODULE_AUTHOR("Michael Buesch"); +MODULE_LICENSE("GPL"); +*/ + +static const struct ssb_device_id ssb_gige_tbl[] = { + SSB_DEVICE(SSB_VENDOR_BROADCOM, SSB_DEV_ETHERNET_GBIT, SSB_ANY_REV), + SSB_DEVTABLE_END +}; +/* MODULE_DEVICE_TABLE(ssb, ssb_gige_tbl); */ + + +static inline u8 gige_read8(struct ssb_gige *dev, u16 offset) +{ + return ssb_read8(dev->dev, offset); +} + +static inline u16 gige_read16(struct ssb_gige *dev, u16 offset) +{ + return ssb_read16(dev->dev, offset); +} + +static inline u32 gige_read32(struct ssb_gige *dev, u16 offset) +{ + return ssb_read32(dev->dev, offset); +} + +static inline void gige_write8(struct ssb_gige *dev, + u16 offset, u8 value) +{ + ssb_write8(dev->dev, offset, value); +} + +static inline void gige_write16(struct ssb_gige *dev, + u16 offset, u16 value) +{ + ssb_write16(dev->dev, offset, value); +} + +static inline void gige_write32(struct ssb_gige *dev, + u16 offset, u32 value) +{ + ssb_write32(dev->dev, offset, value); +} + +static inline +u8 gige_pcicfg_read8(struct ssb_gige *dev, unsigned int offset) +{ + BUG_ON(offset >= 256); + return gige_read8(dev, SSB_GIGE_PCICFG + offset); +} + +static inline +u16 gige_pcicfg_read16(struct ssb_gige *dev, unsigned int offset) +{ + BUG_ON(offset >= 256); + return gige_read16(dev, SSB_GIGE_PCICFG + offset); +} + +static inline +u32 gige_pcicfg_read32(struct ssb_gige *dev, unsigned int offset) +{ + BUG_ON(offset >= 256); + return gige_read32(dev, SSB_GIGE_PCICFG + offset); +} + +static inline +void gige_pcicfg_write8(struct ssb_gige *dev, + unsigned int offset, u8 value) +{ + BUG_ON(offset >= 256); + gige_write8(dev, SSB_GIGE_PCICFG + offset, value); +} + +static inline +void gige_pcicfg_write16(struct ssb_gige *dev, + unsigned int offset, u16 value) +{ + BUG_ON(offset >= 256); + gige_write16(dev, SSB_GIGE_PCICFG + offset, value); +} + +static inline +void gige_pcicfg_write32(struct ssb_gige *dev, + unsigned int offset, u32 value) +{ + BUG_ON(offset >= 256); + gige_write32(dev, SSB_GIGE_PCICFG + offset, value); +} + +static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 *val) +{ + struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); + unsigned long flags; + + if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0)) + return PCIBIOS_DEVICE_NOT_FOUND; + if (reg >= 256) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&dev->lock, flags); + switch (size) { + case 1: + *val = gige_pcicfg_read8(dev, reg); + break; + case 2: + *val = gige_pcicfg_read16(dev, reg); + break; + case 4: + *val = gige_pcicfg_read32(dev, reg); + break; + default: + WARN_ON(1); + } + spin_unlock_irqrestore(&dev->lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn, + int reg, int size, u32 val) +{ + struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); + unsigned long flags; + + if ((PCI_SLOT(devfn) > 0) || (PCI_FUNC(devfn) > 0)) + return PCIBIOS_DEVICE_NOT_FOUND; + if (reg >= 256) + return PCIBIOS_DEVICE_NOT_FOUND; + + spin_lock_irqsave(&dev->lock, flags); + switch (size) { + case 1: + gige_pcicfg_write8(dev, reg, val); + break; + case 2: + gige_pcicfg_write16(dev, reg, val); + break; + case 4: + gige_pcicfg_write32(dev, reg, val); + break; + default: + WARN_ON(1); + } + spin_unlock_irqrestore(&dev->lock, flags); + + return PCIBIOS_SUCCESSFUL; +} + +static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id) +{ + struct ssb_gige *dev; + u32 base, tmslow, tmshigh; + + dev = kzalloc(sizeof(*dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + dev->dev = sdev; + + spin_lock_init(&dev->lock); + dev->pci_controller.pci_ops = &dev->pci_ops; + dev->pci_controller.io_resource = &dev->io_resource; + dev->pci_controller.mem_resource = &dev->mem_resource; + dev->pci_controller.io_map_base = 0x800; + dev->pci_ops.read = ssb_gige_pci_read_config; + dev->pci_ops.write = ssb_gige_pci_write_config; + + dev->io_resource.name = SSB_GIGE_IO_RES_NAME; + dev->io_resource.start = 0x800; + dev->io_resource.end = 0x8FF; + dev->io_resource.flags = IORESOURCE_IO | IORESOURCE_PCI_FIXED; + + if (!ssb_device_is_enabled(sdev)) + ssb_device_enable(sdev, 0); + + /* Setup BAR0. This is a 64k MMIO region. */ + base = ssb_admatch_base(ssb_read32(sdev, SSB_ADMATCH1)); + gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_0, base); + gige_pcicfg_write32(dev, PCI_BASE_ADDRESS_1, 0); + + dev->mem_resource.name = SSB_GIGE_MEM_RES_NAME; + dev->mem_resource.start = base; + dev->mem_resource.end = base + 0x10000 - 1; + dev->mem_resource.flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; + + /* Enable the memory region. */ + gige_pcicfg_write16(dev, PCI_COMMAND, + gige_pcicfg_read16(dev, PCI_COMMAND) + | PCI_COMMAND_MEMORY); + + /* Write flushing is controlled by the Flush Status Control register. + * We want to flush every register write with a timeout and we want + * to disable the IRQ mask while flushing to avoid concurrency. + * Note that automatic write flushing does _not_ work from + * an IRQ handler. The driver must flush manually by reading a register. + */ + gige_write32(dev, SSB_GIGE_SHIM_FLUSHSTAT, 0x00000068); + + /* Check if we have an RGMII or GMII PHY-bus. + * On RGMII do not bypass the DLLs */ + tmslow = ssb_read32(sdev, SSB_TMSLOW); + tmshigh = ssb_read32(sdev, SSB_TMSHIGH); + if (tmshigh & SSB_GIGE_TMSHIGH_RGMII) { + tmslow &= ~SSB_GIGE_TMSLOW_TXBYPASS; + tmslow &= ~SSB_GIGE_TMSLOW_RXBYPASS; + dev->has_rgmii = 1; + } else { + tmslow |= SSB_GIGE_TMSLOW_TXBYPASS; + tmslow |= SSB_GIGE_TMSLOW_RXBYPASS; + dev->has_rgmii = 0; + } + tmslow |= SSB_GIGE_TMSLOW_DLLEN; + ssb_write32(sdev, SSB_TMSLOW, tmslow); + + ssb_set_drvdata(sdev, dev); + register_pci_controller(&dev->pci_controller); + + return 0; +} + +bool pdev_is_ssb_gige_core(struct pci_dev *pdev) +{ + if (!pdev->resource[0].name) + return 0; + return (strcmp(pdev->resource[0].name, SSB_GIGE_MEM_RES_NAME) == 0); +} +EXPORT_SYMBOL(pdev_is_ssb_gige_core); + +int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev, + struct pci_dev *pdev) +{ + struct ssb_gige *dev = ssb_get_drvdata(sdev); + struct resource *res; + + if (pdev->bus->ops != &dev->pci_ops) { + /* The PCI device is not on this SSB GigE bridge device. */ + return -ENODEV; + } + + /* Fixup the PCI resources. */ + res = &(pdev->resource[0]); + res->flags = IORESOURCE_MEM | IORESOURCE_PCI_FIXED; + res->name = dev->mem_resource.name; + res->start = dev->mem_resource.start; + res->end = dev->mem_resource.end; + + /* Fixup interrupt lines. */ + pdev->irq = ssb_mips_irq(sdev) + 2; + pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, pdev->irq); + + return 0; +} + +int ssb_gige_map_irq(struct ssb_device *sdev, + const struct pci_dev *pdev) +{ + struct ssb_gige *dev = ssb_get_drvdata(sdev); + + if (pdev->bus->ops != &dev->pci_ops) { + /* The PCI device is not on this SSB GigE bridge device. */ + return -ENODEV; + } + + return ssb_mips_irq(sdev) + 2; +} + +static struct ssb_driver ssb_gige_driver = { + .name = "BCM-GigE", + .id_table = ssb_gige_tbl, + .probe = ssb_gige_probe, +}; + +int ssb_gige_init(void) +{ + return ssb_driver_register(&ssb_gige_driver); +} diff --git a/drivers/ssb/driver_mipscore.c b/drivers/ssb/driver_mipscore.c index 3d3dd32bf3ab..e3fad3123ecb 100644 --- a/drivers/ssb/driver_mipscore.c +++ b/drivers/ssb/driver_mipscore.c @@ -209,6 +209,7 @@ void ssb_mipscore_init(struct ssb_mipscore *mcore) /* fallthrough */ case SSB_DEV_PCI: case SSB_DEV_ETHERNET: + case SSB_DEV_ETHERNET_GBIT: case SSB_DEV_80211: case SSB_DEV_USB20_HOST: /* These devices get their own IRQ line if available, the rest goes on IRQ0 */ diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 74b9a8aea52b..33a7d5620474 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -60,77 +60,6 @@ static DEFINE_SPINLOCK(cfgspace_lock); /* Core to access the external PCI config space. Can only have one. */ static struct ssb_pcicore *extpci_core; -static u32 ssb_pcicore_pcibus_iobase = 0x100; -static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; - -int pcibios_plat_dev_init(struct pci_dev *d) -{ - struct resource *res; - int pos, size; - u32 *base; - - ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", - pci_name(d)); - - /* Fix up resource bases */ - for (pos = 0; pos < 6; pos++) { - res = &d->resource[pos]; - if (res->flags & IORESOURCE_IO) - base = &ssb_pcicore_pcibus_iobase; - else - base = &ssb_pcicore_pcibus_membase; - res->flags |= IORESOURCE_PCI_FIXED; - if (res->end) { - size = res->end - res->start + 1; - if (*base & (size - 1)) - *base = (*base + size) & ~(size - 1); - res->start = *base; - res->end = res->start + size - 1; - *base += size; - pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); - } - /* Fix up PCI bridge BAR0 only */ - if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) - break; - } - /* Fix up interrupt lines */ - d->irq = ssb_mips_irq(extpci_core->dev) + 2; - pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); - - return 0; -} - -static void __init ssb_fixup_pcibridge(struct pci_dev *dev) -{ - u8 lat; - - if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) - return; - - ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); - - /* Enable PCI bridge bus mastering and memory space */ - pci_set_master(dev); - if (pcibios_enable_device(dev, ~0) < 0) { - ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); - return; - } - - /* Enable PCI bridge BAR1 prefetch and burst */ - pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); - - /* Make sure our latency is high enough to handle the devices behind us */ - lat = 168; - ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} -DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_fixup_pcibridge); - -int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return ssb_mips_irq(extpci_core->dev) + 2; -} static u32 get_cfgspace_addr(struct ssb_pcicore *pc, unsigned int bus, unsigned int dev, @@ -320,6 +249,95 @@ static struct pci_controller ssb_pcicore_controller = { .mem_offset = 0x24000000, }; +static u32 ssb_pcicore_pcibus_iobase = 0x100; +static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; + +/* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. */ +int ssb_pcicore_plat_dev_init(struct pci_dev *d) +{ + struct resource *res; + int pos, size; + u32 *base; + + if (d->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + + ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", + pci_name(d)); + + /* Fix up resource bases */ + for (pos = 0; pos < 6; pos++) { + res = &d->resource[pos]; + if (res->flags & IORESOURCE_IO) + base = &ssb_pcicore_pcibus_iobase; + else + base = &ssb_pcicore_pcibus_membase; + res->flags |= IORESOURCE_PCI_FIXED; + if (res->end) { + size = res->end - res->start + 1; + if (*base & (size - 1)) + *base = (*base + size) & ~(size - 1); + res->start = *base; + res->end = res->start + size - 1; + *base += size; + pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); + } + /* Fix up PCI bridge BAR0 only */ + if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) + break; + } + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); + + return 0; +} + +/* Early PCI fixup for a device on the PCI-core bridge. */ +static void ssb_pcicore_fixup_pcibridge(struct pci_dev *dev) +{ + u8 lat; + + if (dev->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return; + } + if (dev->bus->number != 0 || PCI_SLOT(dev->devfn) != 0) + return; + + ssb_printk(KERN_INFO "PCI: Fixing up bridge %s\n", pci_name(dev)); + + /* Enable PCI bridge bus mastering and memory space */ + pci_set_master(dev); + if (pcibios_enable_device(dev, ~0) < 0) { + ssb_printk(KERN_ERR "PCI: SSB bridge enable failed\n"); + return; + } + + /* Enable PCI bridge BAR1 prefetch and burst */ + pci_write_config_dword(dev, SSB_BAR1_CONTROL, 3); + + /* Make sure our latency is high enough to handle the devices behind us */ + lat = 168; + ssb_printk(KERN_INFO "PCI: Fixing latency timer of device %s to %u\n", + pci_name(dev), lat); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); +} +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, ssb_pcicore_fixup_pcibridge); + +/* PCI device IRQ mapping. */ +int ssb_pcicore_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + if (dev->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; + } + return ssb_mips_irq(extpci_core->dev) + 2; +} + static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) { u32 val; diff --git a/drivers/ssb/embedded.c b/drivers/ssb/embedded.c index d3ade821555c..7dc3a6b41397 100644 --- a/drivers/ssb/embedded.c +++ b/drivers/ssb/embedded.c @@ -10,6 +10,9 @@ #include <linux/ssb/ssb.h> #include <linux/ssb/ssb_embedded.h> +#include <linux/ssb/ssb_driver_pci.h> +#include <linux/ssb/ssb_driver_gige.h> +#include <linux/pci.h> #include "ssb_private.h" @@ -130,3 +133,90 @@ u32 ssb_gpio_polarity(struct ssb_bus *bus, u32 mask, u32 value) return res; } EXPORT_SYMBOL(ssb_gpio_polarity); + +#ifdef CONFIG_SSB_DRIVER_GIGE +static int gige_pci_init_callback(struct ssb_bus *bus, unsigned long data) +{ + struct pci_dev *pdev = (struct pci_dev *)data; + struct ssb_device *dev; + unsigned int i; + int res; + + for (i = 0; i < bus->nr_devices; i++) { + dev = &(bus->devices[i]); + if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT) + continue; + if (!dev->dev || + !dev->dev->driver || + !device_is_registered(dev->dev)) + continue; + res = ssb_gige_pcibios_plat_dev_init(dev, pdev); + if (res >= 0) + return res; + } + + return -ENODEV; +} +#endif /* CONFIG_SSB_DRIVER_GIGE */ + +int ssb_pcibios_plat_dev_init(struct pci_dev *dev) +{ + int err; + + err = ssb_pcicore_plat_dev_init(dev); + if (!err) + return 0; +#ifdef CONFIG_SSB_DRIVER_GIGE + err = ssb_for_each_bus_call((unsigned long)dev, gige_pci_init_callback); + if (err >= 0) + return err; +#endif + /* This is not a PCI device on any SSB device. */ + + return -ENODEV; +} + +#ifdef CONFIG_SSB_DRIVER_GIGE +static int gige_map_irq_callback(struct ssb_bus *bus, unsigned long data) +{ + const struct pci_dev *pdev = (const struct pci_dev *)data; + struct ssb_device *dev; + unsigned int i; + int res; + + for (i = 0; i < bus->nr_devices; i++) { + dev = &(bus->devices[i]); + if (dev->id.coreid != SSB_DEV_ETHERNET_GBIT) + continue; + if (!dev->dev || + !dev->dev->driver || + !device_is_registered(dev->dev)) + continue; + res = ssb_gige_map_irq(dev, pdev); + if (res >= 0) + return res; + } + + return -ENODEV; +} +#endif /* CONFIG_SSB_DRIVER_GIGE */ + +int ssb_pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) +{ + int res; + + /* Check if this PCI device is a device on a SSB bus or device + * and return the IRQ number for it. */ + + res = ssb_pcicore_pcibios_map_irq(dev, slot, pin); + if (res >= 0) + return res; +#ifdef CONFIG_SSB_DRIVER_GIGE + res = ssb_for_each_bus_call((unsigned long)dev, gige_map_irq_callback); + if (res >= 0) + return res; +#endif + /* This is not a PCI device on any SSB device. */ + + return -ENODEV; +} diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 8db40c4b86e9..49d7bbb9bea7 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -14,6 +14,7 @@ #include <linux/io.h> #include <linux/ssb/ssb.h> #include <linux/ssb/ssb_regs.h> +#include <linux/ssb/ssb_driver_gige.h> #include <linux/dma-mapping.h> #include <linux/pci.h> @@ -68,6 +69,25 @@ found: } #endif /* CONFIG_SSB_PCIHOST */ +int ssb_for_each_bus_call(unsigned long data, + int (*func)(struct ssb_bus *bus, unsigned long data)) +{ + struct ssb_bus *bus; + int res; + + ssb_buses_lock(); + list_for_each_entry(bus, &buses, list) { + res = func(bus, data); + if (res >= 0) { + ssb_buses_unlock(); + return res; + } + } + ssb_buses_unlock(); + + return -ENODEV; +} + static struct ssb_device *ssb_device_get(struct ssb_device *dev) { if (dev) @@ -1171,7 +1191,14 @@ static int __init ssb_modinit(void) err = b43_pci_ssb_bridge_init(); if (err) { ssb_printk(KERN_ERR "Broadcom 43xx PCI-SSB-bridge " - "initialization failed"); + "initialization failed\n"); + /* don't fail SSB init because of this */ + err = 0; + } + err = ssb_gige_init(); + if (err) { + ssb_printk(KERN_ERR "SSB Broadcom Gigabit Ethernet " + "driver initialization failed\n"); /* don't fail SSB init because of this */ err = 0; } @@ -1185,6 +1212,7 @@ fs_initcall(ssb_modinit); static void __exit ssb_modexit(void) { + ssb_gige_exit(); b43_pci_ssb_bridge_exit(); bus_unregister(&ssb_bustype); } diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index 21eca2b5118b..d03b20983b1e 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -118,6 +118,8 @@ extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); extern int ssb_devices_freeze(struct ssb_bus *bus); extern int ssb_devices_thaw(struct ssb_bus *bus); extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); +int ssb_for_each_bus_call(unsigned long data, + int (*func)(struct ssb_bus *bus, unsigned long data)); /* b43_pci_bridge.c */ #ifdef CONFIG_SSB_B43_PCI_BRIDGE |