diff options
Diffstat (limited to 'drivers/staging/brcm80211/brcmsmac/types.h')
-rw-r--r-- | drivers/staging/brcm80211/brcmsmac/types.h | 399 |
1 files changed, 0 insertions, 399 deletions
diff --git a/drivers/staging/brcm80211/brcmsmac/types.h b/drivers/staging/brcm80211/brcmsmac/types.h deleted file mode 100644 index 823b5e4672e2..000000000000 --- a/drivers/staging/brcm80211/brcmsmac/types.h +++ /dev/null @@ -1,399 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _BRCM_TYPES_H_ -#define _BRCM_TYPES_H_ - -#include <linux/types.h> -#include <linux/io.h> - -/* Bus types */ -#define SI_BUS 0 /* SOC Interconnect */ -#define PCI_BUS 1 /* PCI target */ -#define SDIO_BUS 3 /* SDIO target */ -#define JTAG_BUS 4 /* JTAG */ -#define USB_BUS 5 /* USB (does not support R/W REG) */ -#define SPI_BUS 6 /* gSPI target */ -#define RPC_BUS 7 /* RPC target */ - -#define WL_CHAN_FREQ_RANGE_2G 0 -#define WL_CHAN_FREQ_RANGE_5GL 1 -#define WL_CHAN_FREQ_RANGE_5GM 2 -#define WL_CHAN_FREQ_RANGE_5GH 3 - -#define MAX_DMA_SEGS 4 - -/* boardflags */ -#define BFL_PACTRL 0x00000002 /* Board has gpio 9 controlling the PA */ -#define BFL_NOPLLDOWN 0x00000020 /* Not ok to power down the chip pll and oscillator */ -#define BFL_FEM 0x00000800 /* Board supports the Front End Module */ -#define BFL_EXTLNA 0x00001000 /* Board has an external LNA in 2.4GHz band */ -#define BFL_NOPA 0x00010000 /* Board has no PA */ -#define BFL_BUCKBOOST 0x00200000 /* Power topology uses BUCKBOOST */ -#define BFL_FEM_BT 0x00400000 /* Board has FEM and switch to share antenna w/ BT */ -#define BFL_NOCBUCK 0x00800000 /* Power topology doesn't use CBUCK */ -#define BFL_PALDO 0x02000000 /* Power topology uses PALDO */ -#define BFL_EXTLNA_5GHz 0x10000000 /* Board has an external LNA in 5GHz band */ - -/* boardflags2 */ -#define BFL2_RXBB_INT_REG_DIS 0x00000001 /* Board has an external rxbb regulator */ -#define BFL2_APLL_WAR 0x00000002 /* Flag to implement alternative A-band PLL settings */ -#define BFL2_TXPWRCTRL_EN 0x00000004 /* Board permits enabling TX Power Control */ -#define BFL2_2X4_DIV 0x00000008 /* Board supports the 2X4 diversity switch */ -#define BFL2_5G_PWRGAIN 0x00000010 /* Board supports 5G band power gain */ -#define BFL2_PCIEWAR_OVR 0x00000020 /* Board overrides ASPM and Clkreq settings */ -#define BFL2_LEGACY 0x00000080 -#define BFL2_SKWRKFEM_BRD 0x00000100 /* 4321mcm93 board uses Skyworks FEM */ -#define BFL2_SPUR_WAR 0x00000200 /* Board has a WAR for clock-harmonic spurs */ -#define BFL2_GPLL_WAR 0x00000400 /* Flag to narrow G-band PLL loop b/w */ -#define BFL2_SINGLEANT_CCK 0x00001000 /* Tx CCK pkts on Ant 0 only */ -#define BFL2_2G_SPUR_WAR 0x00002000 /* WAR to reduce and avoid clock-harmonic spurs in 2G */ -#define BFL2_GPLL_WAR2 0x00010000 /* Flag to widen G-band PLL loop b/w */ -#define BFL2_IPALVLSHIFT_3P3 0x00020000 -#define BFL2_INTERNDET_TXIQCAL 0x00040000 /* Use internal envelope detector for TX IQCAL */ -#define BFL2_XTALBUFOUTEN 0x00080000 /* Keep the buffered Xtal output from radio "ON" - * Most drivers will turn it off without this flag - * to save power. - */ - -/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */ -#define BOARD_GPIO_PACTRL 0x200 /* bit 9 controls the PA on new 4306 boards */ -#define BOARD_GPIO_12 0x1000 /* gpio 12 */ -#define BOARD_GPIO_13 0x2000 /* gpio 13 */ - -/* **** Core type/rev defaults **** */ -#define D11CONF 0x0fffffb0 /* Supported D11 revs: 4, 5, 7-27 - * also need to update wlc.h MAXCOREREV - */ - -#define NCONF 0x000001ff /* Supported nphy revs: - * 0 4321a0 - * 1 4321a1 - * 2 4321b0/b1/c0/c1 - * 3 4322a0 - * 4 4322a1 - * 5 4716a0 - * 6 43222a0, 43224a0 - * 7 43226a0 - * 8 5357a0, 43236a0 - */ - -#define LCNCONF 0x00000007 /* Supported lcnphy revs: - * 0 4313a0, 4336a0, 4330a0 - * 1 - * 2 4330a0 - */ - -#define SSLPNCONF 0x0000000f /* Supported sslpnphy revs: - * 0 4329a0/k0 - * 1 4329b0/4329C0 - * 2 4319a0 - * 3 5356a0 - */ - -/******************************************************************** - * Phy/Core Configuration. Defines macros to to check core phy/rev * - * compile-time configuration. Defines default core support. * - * ****************************************************************** - */ - -/* Basic macros to check a configuration bitmask */ - -#define CONF_HAS(config, val) ((config) & (1 << (val))) -#define CONF_MSK(config, mask) ((config) & (mask)) -#define MSK_RANGE(low, hi) ((1 << ((hi)+1)) - (1 << (low))) -#define CONF_RANGE(config, low, hi) (CONF_MSK(config, MSK_RANGE(low, high))) - -#define CONF_IS(config, val) ((config) == (1 << (val))) -#define CONF_GE(config, val) ((config) & (0-(1 << (val)))) -#define CONF_GT(config, val) ((config) & (0-2*(1 << (val)))) -#define CONF_LT(config, val) ((config) & ((1 << (val))-1)) -#define CONF_LE(config, val) ((config) & (2*(1 << (val))-1)) - -/* Wrappers for some of the above, specific to config constants */ - -#define NCONF_HAS(val) CONF_HAS(NCONF, val) -#define NCONF_MSK(mask) CONF_MSK(NCONF, mask) -#define NCONF_IS(val) CONF_IS(NCONF, val) -#define NCONF_GE(val) CONF_GE(NCONF, val) -#define NCONF_GT(val) CONF_GT(NCONF, val) -#define NCONF_LT(val) CONF_LT(NCONF, val) -#define NCONF_LE(val) CONF_LE(NCONF, val) - -#define LCNCONF_HAS(val) CONF_HAS(LCNCONF, val) -#define LCNCONF_MSK(mask) CONF_MSK(LCNCONF, mask) -#define LCNCONF_IS(val) CONF_IS(LCNCONF, val) -#define LCNCONF_GE(val) CONF_GE(LCNCONF, val) -#define LCNCONF_GT(val) CONF_GT(LCNCONF, val) -#define LCNCONF_LT(val) CONF_LT(LCNCONF, val) -#define LCNCONF_LE(val) CONF_LE(LCNCONF, val) - -#define D11CONF_HAS(val) CONF_HAS(D11CONF, val) -#define D11CONF_MSK(mask) CONF_MSK(D11CONF, mask) -#define D11CONF_IS(val) CONF_IS(D11CONF, val) -#define D11CONF_GE(val) CONF_GE(D11CONF, val) -#define D11CONF_GT(val) CONF_GT(D11CONF, val) -#define D11CONF_LT(val) CONF_LT(D11CONF, val) -#define D11CONF_LE(val) CONF_LE(D11CONF, val) - -#define PHYCONF_HAS(val) CONF_HAS(PHYTYPE, val) -#define PHYCONF_IS(val) CONF_IS(PHYTYPE, val) - -#define NREV_IS(var, val) (NCONF_HAS(val) && (NCONF_IS(val) || ((var) == (val)))) -#define NREV_GE(var, val) (NCONF_GE(val) && (!NCONF_LT(val) || ((var) >= (val)))) -#define NREV_GT(var, val) (NCONF_GT(val) && (!NCONF_LE(val) || ((var) > (val)))) -#define NREV_LT(var, val) (NCONF_LT(val) && (!NCONF_GE(val) || ((var) < (val)))) -#define NREV_LE(var, val) (NCONF_LE(val) && (!NCONF_GT(val) || ((var) <= (val)))) - -#define LCNREV_IS(var, val) (LCNCONF_HAS(val) && (LCNCONF_IS(val) || ((var) == (val)))) -#define LCNREV_GE(var, val) (LCNCONF_GE(val) && (!LCNCONF_LT(val) || ((var) >= (val)))) -#define LCNREV_GT(var, val) (LCNCONF_GT(val) && (!LCNCONF_LE(val) || ((var) > (val)))) -#define LCNREV_LT(var, val) (LCNCONF_LT(val) && (!LCNCONF_GE(val) || ((var) < (val)))) -#define LCNREV_LE(var, val) (LCNCONF_LE(val) && (!LCNCONF_GT(val) || ((var) <= (val)))) - -#define D11REV_IS(var, val) (D11CONF_HAS(val) && (D11CONF_IS(val) || ((var) == (val)))) -#define D11REV_GE(var, val) (D11CONF_GE(val) && (!D11CONF_LT(val) || ((var) >= (val)))) -#define D11REV_GT(var, val) (D11CONF_GT(val) && (!D11CONF_LE(val) || ((var) > (val)))) -#define D11REV_LT(var, val) (D11CONF_LT(val) && (!D11CONF_GE(val) || ((var) < (val)))) -#define D11REV_LE(var, val) (D11CONF_LE(val) && (!D11CONF_GT(val) || ((var) <= (val)))) - -#define PHYTYPE_IS(var, val) (PHYCONF_HAS(val) && (PHYCONF_IS(val) || ((var) == (val)))) - -/* Finally, early-exit from switch case if anyone wants it... */ - -#define CASECHECK(config, val) if (!(CONF_HAS(config, val))) break -#define CASEMSK(config, mask) if (!(CONF_MSK(config, mask))) break - -/* Set up PHYTYPE automatically: (depends on PHY_TYPE_X, from d11.h) */ - -#define _PHYCONF_N (1 << PHY_TYPE_N) -#define _PHYCONF_LCN (1 << PHY_TYPE_LCN) -#define _PHYCONF_SSLPN (1 << PHY_TYPE_SSN) - -#define PHYTYPE (_PHYCONF_N | _PHYCONF_LCN | _PHYCONF_SSLPN) - -/* Utility macro to identify 802.11n (HT) capable PHYs */ -#define PHYTYPE_11N_CAP(phytype) \ - (PHYTYPE_IS(phytype, PHY_TYPE_N) || \ - PHYTYPE_IS(phytype, PHY_TYPE_LCN) || \ - PHYTYPE_IS(phytype, PHY_TYPE_SSN)) - -/* Last but not least: shorter wlc-specific var checks */ -#define BRCMS_ISNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_N) -#define BRCMS_ISLCNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_LCN) -#define BRCMS_ISSSLPNPHY(band) PHYTYPE_IS((band)->phytype, PHY_TYPE_SSN) - -#define BRCMS_PHY_11N_CAP(band) PHYTYPE_11N_CAP((band)->phytype) - -/********************************************************************** - * ------------- End of Core phy/rev configuration. ----------------- * - * ******************************************************************** - */ - -/************************************************* - * Defaults for tunables (e.g. sizing constants) - * - * For each new tunable, add a member to the end - * of struct brcms_tunables in brcms_c_pub.h to enable - * runtime checks of tunable values. (Directly - * using the macros in code invalidates ROM code) - * - * *********************************************** - */ -#define NTXD 256 /* Max # of entries in Tx FIFO based on 4kb page size */ -#define NRXD 256 /* Max # of entries in Rx FIFO based on 4kb page size */ -#define NRXBUFPOST 32 /* try to keep this # rbufs posted to the chip */ -#define MAXSCB 32 /* Maximum SCBs in cache for STA */ -#define AMPDU_NUM_MPDU 16 /* max allowed number of mpdus in an ampdu (2 streams) */ - -/* Count of packet callback structures. either of following - * 1. Set to the number of SCBs since a STA - * can queue up a rate callback for each IBSS STA it knows about, and an AP can - * queue up an "are you there?" Null Data callback for each associated STA - * 2. controlled by tunable config file - */ -#define MAXPKTCB MAXSCB /* Max number of packet callbacks */ - -/* NetBSD also needs to keep track of this */ - -/* Number of BSS handled in ucode bcn/prb */ -#define BRCMS_MAX_UCODE_BSS (16) -/* Number of BSS handled in sw bcn/prb */ -#define BRCMS_MAX_UCODE_BSS4 (4) -/* max # BSS configs */ -#define BRCMS_MAXBSSCFG (1) -/* max # available networks */ -#define MAXBSS 64 -/* data msg txq hiwat mark */ -#define BRCMS_DATAHIWAT 50 -#define BRCMS_AMPDUDATAHIWAT 255 - -/* bounded rx loops */ -#define RXBND 8 /* max # frames to process in brcms_c_recv() */ -#define TXSBND 8 /* max # tx status to process in wlc_txstatus() */ - -#define BAND_5G(bt) ((bt) == BRCM_BAND_5G) -#define BAND_2G(bt) ((bt) == BRCM_BAND_2G) - -#define BCMMSG(dev, fmt, args...) \ -do { \ - if (brcm_msg_level & LOG_TRACE_VAL) \ - wiphy_err(dev, "%s: " fmt, __func__, ##args); \ -} while (0) - -#define WL_ERROR_ON() (brcm_msg_level & LOG_ERROR_VAL) - -/* register access macros */ -#ifndef __BIG_ENDIAN -#ifndef __mips__ -#define R_REG(r) \ - ({\ - sizeof(*(r)) == sizeof(u8) ? \ - readb((u8 *)(r)) : \ - sizeof(*(r)) == sizeof(u16) ? readw((u16 *)(r)) : \ - readl((u32 *)(r)); \ - }) -#else /* __mips__ */ -#define R_REG(r) \ - ({ \ - __typeof(*(r)) __osl_v; \ - __asm__ __volatile__("sync"); \ - switch (sizeof(*(r))) { \ - case sizeof(u8): \ - __osl_v = readb((u8 *)(r)); \ - break; \ - case sizeof(u16): \ - __osl_v = readw((u16 *)(r)); \ - break; \ - case sizeof(u32): \ - __osl_v = \ - readl((u32 *)(r)); \ - break; \ - } \ - __asm__ __volatile__("sync"); \ - __osl_v; \ - }) -#endif /* __mips__ */ - -#define W_REG(r, v) do { \ - switch (sizeof(*(r))) { \ - case sizeof(u8): \ - writeb((u8)(v), (u8 *)(r)); break; \ - case sizeof(u16): \ - writew((u16)(v), (u16 *)(r)); break; \ - case sizeof(u32): \ - writel((u32)(v), (u32 *)(r)); break; \ - }; \ - } while (0) -#else /* __BIG_ENDIAN */ -#define R_REG(r) \ - ({ \ - __typeof(*(r)) __osl_v; \ - switch (sizeof(*(r))) { \ - case sizeof(u8): \ - __osl_v = \ - readb((u8 *)((r)^3)); \ - break; \ - case sizeof(u16): \ - __osl_v = \ - readw((u16 *)((r)^2)); \ - break; \ - case sizeof(u32): \ - __osl_v = readl((u32 *)(r)); \ - break; \ - } \ - __osl_v; \ - }) - -#define W_REG(r, v) do { \ - switch (sizeof(*(r))) { \ - case sizeof(u8): \ - writeb((u8)(v), \ - (u8 *)((r)^3)); break; \ - case sizeof(u16): \ - writew((u16)(v), \ - (u16 *)((r)^2)); break; \ - case sizeof(u32): \ - writel((u32)(v), \ - (u32 *)(r)); break; \ - } \ - } while (0) -#endif /* __BIG_ENDIAN */ - -#ifdef __mips__ -/* - * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder - * transactions. As a fix, a read after write is performed on certain places - * in the code. Older chips and the newer 5357 family don't require this fix. - */ -#define W_REG_FLUSH(r, v) ({ W_REG((r), (v)); (void)R_REG(r); }) -#else -#define W_REG_FLUSH(r, v) W_REG((r), (v)) -#endif /* __mips__ */ - -#define AND_REG(r, v) W_REG((r), R_REG(r) & (v)) -#define OR_REG(r, v) W_REG((r), R_REG(r) | (v)) - -#define SET_REG(r, mask, val) \ - W_REG((r), ((R_REG(r) & ~(mask)) | (val))) - -/* multi-bool data type: set of bools, mbool is true if any is set */ -typedef u32 mbool; -#define mboolset(mb, bit) ((mb) |= (bit)) /* set one bool */ -#define mboolclr(mb, bit) ((mb) &= ~(bit)) /* clear one bool */ -#define mboolisset(mb, bit) (((mb) & (bit)) != 0) /* true if one bool is set */ -#define mboolmaskset(mb, mask, val) ((mb) = (((mb) & ~(mask)) | (val))) - -/* forward declarations */ -struct wiphy; -struct ieee80211_sta; -struct ieee80211_tx_queue_params; -struct brcms_info; -struct brcms_c_info; -struct brcms_hardware; -struct brcms_c_if; -struct brcmu_iovar; -struct brcmu_strbuf; -struct brcms_txq_info; -struct brcms_band; -struct dma_pub; -struct si_pub; -struct tx_status; -struct d11rxhdr; -struct brcms_d11rxhdr; -struct txpwr_limits; -struct brcms_phy; - -typedef volatile struct intctrlregs intctrlregs_t; -typedef volatile struct pio2regs pio2regs_t; -typedef volatile struct pio2regp pio2regp_t; -typedef volatile struct pio4regs pio4regs_t; -typedef volatile struct pio4regp pio4regp_t; -typedef volatile struct fifo64 fifo64_t; -typedef volatile struct d11regs d11regs_t; -typedef volatile struct dma32diag dma32diag_t; -typedef volatile struct dma64regs dma64regs_t; -typedef struct brcms_rateset wlc_rateset_t; -typedef u32 ratespec_t; -typedef struct chanvec chanvec_t; -typedef s32 fixed; -typedef struct _cs32 cs32; -typedef volatile union pmqreg pmqreg_t; - -/* brcm_msg_level is a bit vector with defs in defs.h */ -extern u32 brcm_msg_level; - -#endif /* _BRCM_TYPES_H_ */ |