diff options
Diffstat (limited to 'drivers/staging/comedi/comedi.h')
-rw-r--r-- | drivers/staging/comedi/comedi.h | 1002 |
1 files changed, 490 insertions, 512 deletions
diff --git a/drivers/staging/comedi/comedi.h b/drivers/staging/comedi/comedi.h index 8101cea84528..957b6405dfa7 100644 --- a/drivers/staging/comedi/comedi.h +++ b/drivers/staging/comedi/comedi.h @@ -121,10 +121,10 @@ extern "C" { #define TRIG_BOGUS 0x0001 /* do the motions */ #define TRIG_DITHER 0x0002 /* enable dithering */ #define TRIG_DEGLITCH 0x0004 /* enable deglitching */ -/*#define TRIG_RT 0x0008 */ /* perform op in real time */ + /*#define TRIG_RT 0x0008 *//* perform op in real time */ #define TRIG_CONFIG 0x0010 /* perform configuration, not triggering */ #define TRIG_WAKE_EOS 0x0020 /* wake up on end-of-scan events */ -/*#define TRIG_WRITE 0x0040*/ /* write to bidirectional devices */ + /*#define TRIG_WRITE 0x0040*//* write to bidirectional devices */ /* command flags */ /* These flags are used in comedi_cmd structures */ @@ -199,93 +199,91 @@ extern "C" { #define SDF_LSAMPL 0x10000000 /* subdevice uses 32-bit samples */ #define SDF_PACKED 0x20000000 /* subdevice can do packed DIO */ /* re recyle these flags for PWM */ -#define SDF_PWM_COUNTER SDF_MODE0 /* PWM can automatically switch off */ -#define SDF_PWM_HBRIDGE SDF_MODE1 /* PWM is signed (H-bridge) */ - - +#define SDF_PWM_COUNTER SDF_MODE0 /* PWM can automatically switch off */ +#define SDF_PWM_HBRIDGE SDF_MODE1 /* PWM is signed (H-bridge) */ /* subdevice types */ -enum comedi_subdevice_type { - COMEDI_SUBD_UNUSED, /* unused by driver */ - COMEDI_SUBD_AI, /* analog input */ - COMEDI_SUBD_AO, /* analog output */ - COMEDI_SUBD_DI, /* digital input */ - COMEDI_SUBD_DO, /* digital output */ - COMEDI_SUBD_DIO, /* digital input/output */ - COMEDI_SUBD_COUNTER, /* counter */ - COMEDI_SUBD_TIMER, /* timer */ - COMEDI_SUBD_MEMORY, /* memory, EEPROM, DPRAM */ - COMEDI_SUBD_CALIB, /* calibration DACs */ - COMEDI_SUBD_PROC, /* processor, DSP */ - COMEDI_SUBD_SERIAL, /* serial IO */ - COMEDI_SUBD_PWM /* PWM */ -}; + enum comedi_subdevice_type { + COMEDI_SUBD_UNUSED, /* unused by driver */ + COMEDI_SUBD_AI, /* analog input */ + COMEDI_SUBD_AO, /* analog output */ + COMEDI_SUBD_DI, /* digital input */ + COMEDI_SUBD_DO, /* digital output */ + COMEDI_SUBD_DIO, /* digital input/output */ + COMEDI_SUBD_COUNTER, /* counter */ + COMEDI_SUBD_TIMER, /* timer */ + COMEDI_SUBD_MEMORY, /* memory, EEPROM, DPRAM */ + COMEDI_SUBD_CALIB, /* calibration DACs */ + COMEDI_SUBD_PROC, /* processor, DSP */ + COMEDI_SUBD_SERIAL, /* serial IO */ + COMEDI_SUBD_PWM /* PWM */ + }; /* configuration instructions */ -enum configuration_ids { - INSN_CONFIG_DIO_INPUT = 0, - INSN_CONFIG_DIO_OUTPUT = 1, - INSN_CONFIG_DIO_OPENDRAIN = 2, - INSN_CONFIG_ANALOG_TRIG = 16, + enum configuration_ids { + INSN_CONFIG_DIO_INPUT = 0, + INSN_CONFIG_DIO_OUTPUT = 1, + INSN_CONFIG_DIO_OPENDRAIN = 2, + INSN_CONFIG_ANALOG_TRIG = 16, /* INSN_CONFIG_WAVEFORM = 17, */ /* INSN_CONFIG_TRIG = 18, */ /* INSN_CONFIG_COUNTER = 19, */ - INSN_CONFIG_ALT_SOURCE = 20, - INSN_CONFIG_DIGITAL_TRIG = 21, - INSN_CONFIG_BLOCK_SIZE = 22, - INSN_CONFIG_TIMER_1 = 23, - INSN_CONFIG_FILTER = 24, - INSN_CONFIG_CHANGE_NOTIFY = 25, - - /*ALPHA*/ INSN_CONFIG_SERIAL_CLOCK = 26, - INSN_CONFIG_BIDIRECTIONAL_DATA = 27, - INSN_CONFIG_DIO_QUERY = 28, - INSN_CONFIG_PWM_OUTPUT = 29, - INSN_CONFIG_GET_PWM_OUTPUT = 30, - INSN_CONFIG_ARM = 31, - INSN_CONFIG_DISARM = 32, - INSN_CONFIG_GET_COUNTER_STATUS = 33, - INSN_CONFIG_RESET = 34, - INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001, /* Use CTR as single pulsegenerator */ - INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002, /* Use CTR as pulsetraingenerator */ - INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003, /* Use the counter as encoder */ - INSN_CONFIG_SET_GATE_SRC = 2001, /* Set gate source */ - INSN_CONFIG_GET_GATE_SRC = 2002, /* Get gate source */ - INSN_CONFIG_SET_CLOCK_SRC = 2003, /* Set master clock source */ - INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */ - INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */ -/* INSN_CONFIG_GET_OTHER_SRC = 2006,*/ /* Get other source */ - INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006, /* Get size in bytes of - subdevice's on-board - fifos used during - streaming - input/output */ - INSN_CONFIG_SET_COUNTER_MODE = 4097, - INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE, /* deprecated */ - INSN_CONFIG_8254_READ_STATUS = 4098, - INSN_CONFIG_SET_ROUTING = 4099, - INSN_CONFIG_GET_ROUTING = 4109, + INSN_CONFIG_ALT_SOURCE = 20, + INSN_CONFIG_DIGITAL_TRIG = 21, + INSN_CONFIG_BLOCK_SIZE = 22, + INSN_CONFIG_TIMER_1 = 23, + INSN_CONFIG_FILTER = 24, + INSN_CONFIG_CHANGE_NOTIFY = 25, + + /*ALPHA*/ INSN_CONFIG_SERIAL_CLOCK = 26, + INSN_CONFIG_BIDIRECTIONAL_DATA = 27, + INSN_CONFIG_DIO_QUERY = 28, + INSN_CONFIG_PWM_OUTPUT = 29, + INSN_CONFIG_GET_PWM_OUTPUT = 30, + INSN_CONFIG_ARM = 31, + INSN_CONFIG_DISARM = 32, + INSN_CONFIG_GET_COUNTER_STATUS = 33, + INSN_CONFIG_RESET = 34, + INSN_CONFIG_GPCT_SINGLE_PULSE_GENERATOR = 1001, /* Use CTR as single pulsegenerator */ + INSN_CONFIG_GPCT_PULSE_TRAIN_GENERATOR = 1002, /* Use CTR as pulsetraingenerator */ + INSN_CONFIG_GPCT_QUADRATURE_ENCODER = 1003, /* Use the counter as encoder */ + INSN_CONFIG_SET_GATE_SRC = 2001, /* Set gate source */ + INSN_CONFIG_GET_GATE_SRC = 2002, /* Get gate source */ + INSN_CONFIG_SET_CLOCK_SRC = 2003, /* Set master clock source */ + INSN_CONFIG_GET_CLOCK_SRC = 2004, /* Get master clock source */ + INSN_CONFIG_SET_OTHER_SRC = 2005, /* Set other source */ + /* INSN_CONFIG_GET_OTHER_SRC = 2006,*//* Get other source */ + INSN_CONFIG_GET_HARDWARE_BUFFER_SIZE = 2006, /* Get size in bytes of + subdevice's on-board + fifos used during + streaming + input/output */ + INSN_CONFIG_SET_COUNTER_MODE = 4097, + INSN_CONFIG_8254_SET_MODE = INSN_CONFIG_SET_COUNTER_MODE, /* deprecated */ + INSN_CONFIG_8254_READ_STATUS = 4098, + INSN_CONFIG_SET_ROUTING = 4099, + INSN_CONFIG_GET_ROUTING = 4109, /* PWM */ - INSN_CONFIG_PWM_SET_PERIOD = 5000, /* sets frequency */ - INSN_CONFIG_PWM_GET_PERIOD = 5001, /* gets frequency */ - INSN_CONFIG_GET_PWM_STATUS = 5002, /* is it running? */ - INSN_CONFIG_PWM_SET_H_BRIDGE = 5003, /* sets H bridge: duty cycle and sign bit for a relay at the same time*/ - INSN_CONFIG_PWM_GET_H_BRIDGE = 5004 /* gets H bridge data: duty cycle and the sign bit */ -}; - -enum comedi_io_direction { - COMEDI_INPUT = 0, - COMEDI_OUTPUT = 1, - COMEDI_OPENDRAIN = 2 -}; - -enum comedi_support_level { - COMEDI_UNKNOWN_SUPPORT = 0, - COMEDI_SUPPORTED, - COMEDI_UNSUPPORTED -}; + INSN_CONFIG_PWM_SET_PERIOD = 5000, /* sets frequency */ + INSN_CONFIG_PWM_GET_PERIOD = 5001, /* gets frequency */ + INSN_CONFIG_GET_PWM_STATUS = 5002, /* is it running? */ + INSN_CONFIG_PWM_SET_H_BRIDGE = 5003, /* sets H bridge: duty cycle and sign bit for a relay at the same time */ + INSN_CONFIG_PWM_GET_H_BRIDGE = 5004 /* gets H bridge data: duty cycle and the sign bit */ + }; + + enum comedi_io_direction { + COMEDI_INPUT = 0, + COMEDI_OUTPUT = 1, + COMEDI_OPENDRAIN = 2 + }; + + enum comedi_support_level { + COMEDI_UNKNOWN_SUPPORT = 0, + COMEDI_SUPPORTED, + COMEDI_UNSUPPORTED + }; /* ioctls */ @@ -309,133 +307,132 @@ enum comedi_support_level { /* structures */ -struct comedi_trig { - unsigned int subdev; /* subdevice */ - unsigned int mode; /* mode */ - unsigned int flags; - unsigned int n_chan; /* number of channels */ - unsigned int *chanlist; /* channel/range list */ - short *data; /* data list, size depends on subd flags */ - unsigned int n; /* number of scans */ - unsigned int trigsrc; - unsigned int trigvar; - unsigned int trigvar1; - unsigned int data_len; - unsigned int unused[3]; -}; - -struct comedi_insn { - unsigned int insn; - unsigned int n; - unsigned int *data; - unsigned int subdev; - unsigned int chanspec; - unsigned int unused[3]; -}; - -struct comedi_insnlist { - unsigned int n_insns; - struct comedi_insn *insns; -}; - -struct comedi_cmd { - unsigned int subdev; - unsigned int flags; - - unsigned int start_src; - unsigned int start_arg; - - unsigned int scan_begin_src; - unsigned int scan_begin_arg; - - unsigned int convert_src; - unsigned int convert_arg; - - unsigned int scan_end_src; - unsigned int scan_end_arg; - - unsigned int stop_src; - unsigned int stop_arg; - - unsigned int *chanlist; /* channel/range list */ - unsigned int chanlist_len; - - short *data; /* data list, size depends on subd flags */ - unsigned int data_len; -}; - -struct comedi_chaninfo { - unsigned int subdev; - unsigned int *maxdata_list; - unsigned int *flaglist; - unsigned int *rangelist; - unsigned int unused[4]; -}; - -struct comedi_rangeinfo { - unsigned int range_type; - void *range_ptr; -}; - -struct comedi_krange { - int min; /* fixed point, multiply by 1e-6 */ - int max; /* fixed point, multiply by 1e-6 */ - unsigned int flags; -}; - - -struct comedi_subdinfo { - unsigned int type; - unsigned int n_chan; - unsigned int subd_flags; - unsigned int timer_type; - unsigned int len_chanlist; - unsigned int maxdata; - unsigned int flags; /* channel flags */ - unsigned int range_type; /* lookup in kernel */ - unsigned int settling_time_0; - unsigned insn_bits_support; /* see support_level enum for values*/ - unsigned int unused[8]; -}; - -struct comedi_devinfo { - unsigned int version_code; - unsigned int n_subdevs; - char driver_name[COMEDI_NAMELEN]; - char board_name[COMEDI_NAMELEN]; - int read_subdevice; - int write_subdevice; - int unused[30]; -}; - -struct comedi_devconfig { - char board_name[COMEDI_NAMELEN]; - int options[COMEDI_NDEVCONFOPTS]; -}; - -struct comedi_bufconfig { - unsigned int subdevice; - unsigned int flags; - - unsigned int maximum_size; - unsigned int size; - - unsigned int unused[4]; -}; - -struct comedi_bufinfo { - unsigned int subdevice; - unsigned int bytes_read; - - unsigned int buf_write_ptr; - unsigned int buf_read_ptr; - unsigned int buf_write_count; - unsigned int buf_read_count; - - unsigned int bytes_written; - - unsigned int unused[4]; -}; + struct comedi_trig { + unsigned int subdev; /* subdevice */ + unsigned int mode; /* mode */ + unsigned int flags; + unsigned int n_chan; /* number of channels */ + unsigned int *chanlist; /* channel/range list */ + short *data; /* data list, size depends on subd flags */ + unsigned int n; /* number of scans */ + unsigned int trigsrc; + unsigned int trigvar; + unsigned int trigvar1; + unsigned int data_len; + unsigned int unused[3]; + }; + + struct comedi_insn { + unsigned int insn; + unsigned int n; + unsigned int *data; + unsigned int subdev; + unsigned int chanspec; + unsigned int unused[3]; + }; + + struct comedi_insnlist { + unsigned int n_insns; + struct comedi_insn *insns; + }; + + struct comedi_cmd { + unsigned int subdev; + unsigned int flags; + + unsigned int start_src; + unsigned int start_arg; + + unsigned int scan_begin_src; + unsigned int scan_begin_arg; + + unsigned int convert_src; + unsigned int convert_arg; + + unsigned int scan_end_src; + unsigned int scan_end_arg; + + unsigned int stop_src; + unsigned int stop_arg; + + unsigned int *chanlist; /* channel/range list */ + unsigned int chanlist_len; + + short *data; /* data list, size depends on subd flags */ + unsigned int data_len; + }; + + struct comedi_chaninfo { + unsigned int subdev; + unsigned int *maxdata_list; + unsigned int *flaglist; + unsigned int *rangelist; + unsigned int unused[4]; + }; + + struct comedi_rangeinfo { + unsigned int range_type; + void *range_ptr; + }; + + struct comedi_krange { + int min; /* fixed point, multiply by 1e-6 */ + int max; /* fixed point, multiply by 1e-6 */ + unsigned int flags; + }; + + struct comedi_subdinfo { + unsigned int type; + unsigned int n_chan; + unsigned int subd_flags; + unsigned int timer_type; + unsigned int len_chanlist; + unsigned int maxdata; + unsigned int flags; /* channel flags */ + unsigned int range_type; /* lookup in kernel */ + unsigned int settling_time_0; + unsigned insn_bits_support; /* see support_level enum for values */ + unsigned int unused[8]; + }; + + struct comedi_devinfo { + unsigned int version_code; + unsigned int n_subdevs; + char driver_name[COMEDI_NAMELEN]; + char board_name[COMEDI_NAMELEN]; + int read_subdevice; + int write_subdevice; + int unused[30]; + }; + + struct comedi_devconfig { + char board_name[COMEDI_NAMELEN]; + int options[COMEDI_NDEVCONFOPTS]; + }; + + struct comedi_bufconfig { + unsigned int subdevice; + unsigned int flags; + + unsigned int maximum_size; + unsigned int size; + + unsigned int unused[4]; + }; + + struct comedi_bufinfo { + unsigned int subdevice; + unsigned int bytes_read; + + unsigned int buf_write_ptr; + unsigned int buf_read_ptr; + unsigned int buf_write_count; + unsigned int buf_read_count; + + unsigned int bytes_written; + + unsigned int unused[4]; + }; /* range stuff */ @@ -486,298 +483,284 @@ struct comedi_bufinfo { */ -enum i8254_mode { - I8254_MODE0 = (0 << 1), /* Interrupt on terminal count */ - I8254_MODE1 = (1 << 1), /* Hardware retriggerable one-shot */ - I8254_MODE2 = (2 << 1), /* Rate generator */ - I8254_MODE3 = (3 << 1), /* Square wave mode */ - I8254_MODE4 = (4 << 1), /* Software triggered strobe */ - I8254_MODE5 = (5 << 1), /* Hardware triggered strobe (retriggerable) */ - I8254_BCD = 1, /* use binary-coded decimal instead of binary (pretty useless) */ - I8254_BINARY = 0 -}; - -static inline unsigned NI_USUAL_PFI_SELECT(unsigned pfi_channel) -{ - if (pfi_channel < 10) - return 0x1 + pfi_channel; - else - return 0xb + pfi_channel; -} -static inline unsigned NI_USUAL_RTSI_SELECT(unsigned rtsi_channel) -{ - if (rtsi_channel < 7) - return 0xb + rtsi_channel; - else - return 0x1b; -} + enum i8254_mode { + I8254_MODE0 = (0 << 1), /* Interrupt on terminal count */ + I8254_MODE1 = (1 << 1), /* Hardware retriggerable one-shot */ + I8254_MODE2 = (2 << 1), /* Rate generator */ + I8254_MODE3 = (3 << 1), /* Square wave mode */ + I8254_MODE4 = (4 << 1), /* Software triggered strobe */ + I8254_MODE5 = (5 << 1), /* Hardware triggered strobe (retriggerable) */ + I8254_BCD = 1, /* use binary-coded decimal instead of binary (pretty useless) */ + I8254_BINARY = 0 + }; + + static inline unsigned NI_USUAL_PFI_SELECT(unsigned pfi_channel) { + if (pfi_channel < 10) + return 0x1 + pfi_channel; + else + return 0xb + pfi_channel; + } static inline unsigned NI_USUAL_RTSI_SELECT(unsigned rtsi_channel) { + if (rtsi_channel < 7) + return 0xb + rtsi_channel; + else + return 0x1b; + } /* mode bits for NI general-purpose counters, set with * INSN_CONFIG_SET_COUNTER_MODE */ #define NI_GPCT_COUNTING_MODE_SHIFT 16 #define NI_GPCT_INDEX_PHASE_BITSHIFT 20 #define NI_GPCT_COUNTING_DIRECTION_SHIFT 24 -enum ni_gpct_mode_bits { - NI_GPCT_GATE_ON_BOTH_EDGES_BIT = 0x4, - NI_GPCT_EDGE_GATE_MODE_MASK = 0x18, - NI_GPCT_EDGE_GATE_STARTS_STOPS_BITS = 0x0, - NI_GPCT_EDGE_GATE_STOPS_STARTS_BITS = 0x8, - NI_GPCT_EDGE_GATE_STARTS_BITS = 0x10, - NI_GPCT_EDGE_GATE_NO_STARTS_NO_STOPS_BITS = 0x18, - NI_GPCT_STOP_MODE_MASK = 0x60, - NI_GPCT_STOP_ON_GATE_BITS = 0x00, - NI_GPCT_STOP_ON_GATE_OR_TC_BITS = 0x20, - NI_GPCT_STOP_ON_GATE_OR_SECOND_TC_BITS = 0x40, - NI_GPCT_LOAD_B_SELECT_BIT = 0x80, - NI_GPCT_OUTPUT_MODE_MASK = 0x300, - NI_GPCT_OUTPUT_TC_PULSE_BITS = 0x100, - NI_GPCT_OUTPUT_TC_TOGGLE_BITS = 0x200, - NI_GPCT_OUTPUT_TC_OR_GATE_TOGGLE_BITS = 0x300, - NI_GPCT_HARDWARE_DISARM_MASK = 0xc00, - NI_GPCT_NO_HARDWARE_DISARM_BITS = 0x000, - NI_GPCT_DISARM_AT_TC_BITS = 0x400, - NI_GPCT_DISARM_AT_GATE_BITS = 0x800, - NI_GPCT_DISARM_AT_TC_OR_GATE_BITS = 0xc00, - NI_GPCT_LOADING_ON_TC_BIT = 0x1000, - NI_GPCT_LOADING_ON_GATE_BIT = 0x4000, - NI_GPCT_COUNTING_MODE_MASK = 0x7 << NI_GPCT_COUNTING_MODE_SHIFT, - NI_GPCT_COUNTING_MODE_NORMAL_BITS = - 0x0 << NI_GPCT_COUNTING_MODE_SHIFT, - NI_GPCT_COUNTING_MODE_QUADRATURE_X1_BITS = - 0x1 << NI_GPCT_COUNTING_MODE_SHIFT, - NI_GPCT_COUNTING_MODE_QUADRATURE_X2_BITS = - 0x2 << NI_GPCT_COUNTING_MODE_SHIFT, - NI_GPCT_COUNTING_MODE_QUADRATURE_X4_BITS = - 0x3 << NI_GPCT_COUNTING_MODE_SHIFT, - NI_GPCT_COUNTING_MODE_TWO_PULSE_BITS = - 0x4 << NI_GPCT_COUNTING_MODE_SHIFT, - NI_GPCT_COUNTING_MODE_SYNC_SOURCE_BITS = - 0x6 << NI_GPCT_COUNTING_MODE_SHIFT, - NI_GPCT_INDEX_PHASE_MASK = 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT, - NI_GPCT_INDEX_PHASE_LOW_A_LOW_B_BITS = - 0x0 << NI_GPCT_INDEX_PHASE_BITSHIFT, - NI_GPCT_INDEX_PHASE_LOW_A_HIGH_B_BITS = - 0x1 << NI_GPCT_INDEX_PHASE_BITSHIFT, - NI_GPCT_INDEX_PHASE_HIGH_A_LOW_B_BITS = - 0x2 << NI_GPCT_INDEX_PHASE_BITSHIFT, - NI_GPCT_INDEX_PHASE_HIGH_A_HIGH_B_BITS = - 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT, - NI_GPCT_INDEX_ENABLE_BIT = 0x400000, - NI_GPCT_COUNTING_DIRECTION_MASK = - 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, - NI_GPCT_COUNTING_DIRECTION_DOWN_BITS = - 0x00 << NI_GPCT_COUNTING_DIRECTION_SHIFT, - NI_GPCT_COUNTING_DIRECTION_UP_BITS = - 0x1 << NI_GPCT_COUNTING_DIRECTION_SHIFT, - NI_GPCT_COUNTING_DIRECTION_HW_UP_DOWN_BITS = - 0x2 << NI_GPCT_COUNTING_DIRECTION_SHIFT, - NI_GPCT_COUNTING_DIRECTION_HW_GATE_BITS = - 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, - NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000, - NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0, - NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000, - NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000, - NI_GPCT_OR_GATE_BIT = 0x10000000, - NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000 -}; + enum ni_gpct_mode_bits { + NI_GPCT_GATE_ON_BOTH_EDGES_BIT = 0x4, + NI_GPCT_EDGE_GATE_MODE_MASK = 0x18, + NI_GPCT_EDGE_GATE_STARTS_STOPS_BITS = 0x0, + NI_GPCT_EDGE_GATE_STOPS_STARTS_BITS = 0x8, + NI_GPCT_EDGE_GATE_STARTS_BITS = 0x10, + NI_GPCT_EDGE_GATE_NO_STARTS_NO_STOPS_BITS = 0x18, + NI_GPCT_STOP_MODE_MASK = 0x60, + NI_GPCT_STOP_ON_GATE_BITS = 0x00, + NI_GPCT_STOP_ON_GATE_OR_TC_BITS = 0x20, + NI_GPCT_STOP_ON_GATE_OR_SECOND_TC_BITS = 0x40, + NI_GPCT_LOAD_B_SELECT_BIT = 0x80, + NI_GPCT_OUTPUT_MODE_MASK = 0x300, + NI_GPCT_OUTPUT_TC_PULSE_BITS = 0x100, + NI_GPCT_OUTPUT_TC_TOGGLE_BITS = 0x200, + NI_GPCT_OUTPUT_TC_OR_GATE_TOGGLE_BITS = 0x300, + NI_GPCT_HARDWARE_DISARM_MASK = 0xc00, + NI_GPCT_NO_HARDWARE_DISARM_BITS = 0x000, + NI_GPCT_DISARM_AT_TC_BITS = 0x400, + NI_GPCT_DISARM_AT_GATE_BITS = 0x800, + NI_GPCT_DISARM_AT_TC_OR_GATE_BITS = 0xc00, + NI_GPCT_LOADING_ON_TC_BIT = 0x1000, + NI_GPCT_LOADING_ON_GATE_BIT = 0x4000, + NI_GPCT_COUNTING_MODE_MASK = 0x7 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_NORMAL_BITS = + 0x0 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_QUADRATURE_X1_BITS = + 0x1 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_QUADRATURE_X2_BITS = + 0x2 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_QUADRATURE_X4_BITS = + 0x3 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_TWO_PULSE_BITS = + 0x4 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_COUNTING_MODE_SYNC_SOURCE_BITS = + 0x6 << NI_GPCT_COUNTING_MODE_SHIFT, + NI_GPCT_INDEX_PHASE_MASK = 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_PHASE_LOW_A_LOW_B_BITS = + 0x0 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_PHASE_LOW_A_HIGH_B_BITS = + 0x1 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_PHASE_HIGH_A_LOW_B_BITS = + 0x2 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_PHASE_HIGH_A_HIGH_B_BITS = + 0x3 << NI_GPCT_INDEX_PHASE_BITSHIFT, + NI_GPCT_INDEX_ENABLE_BIT = 0x400000, + NI_GPCT_COUNTING_DIRECTION_MASK = + 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_COUNTING_DIRECTION_DOWN_BITS = + 0x00 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_COUNTING_DIRECTION_UP_BITS = + 0x1 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_COUNTING_DIRECTION_HW_UP_DOWN_BITS = + 0x2 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_COUNTING_DIRECTION_HW_GATE_BITS = + 0x3 << NI_GPCT_COUNTING_DIRECTION_SHIFT, + NI_GPCT_RELOAD_SOURCE_MASK = 0xc000000, + NI_GPCT_RELOAD_SOURCE_FIXED_BITS = 0x0, + NI_GPCT_RELOAD_SOURCE_SWITCHING_BITS = 0x4000000, + NI_GPCT_RELOAD_SOURCE_GATE_SELECT_BITS = 0x8000000, + NI_GPCT_OR_GATE_BIT = 0x10000000, + NI_GPCT_INVERT_OUTPUT_BIT = 0x20000000 + }; /* Bits for setting a clock source with * INSN_CONFIG_SET_CLOCK_SRC when using NI general-purpose counters. */ -enum ni_gpct_clock_source_bits { - NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f, - NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS = 0x0, - NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS = 0x1, - NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS = 0x2, - NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS = 0x3, - NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS = 0x4, - NI_GPCT_NEXT_TC_CLOCK_SRC_BITS = 0x5, - NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS = 0x6, /* NI 660x-specific */ - NI_GPCT_PXI10_CLOCK_SRC_BITS = 0x7, - NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS = 0x8, - NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS = 0x9, - NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK = 0x30000000, - NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS = 0x0, - NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS = 0x10000000, /* divide source by 2 */ - NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000, /* divide source by 8 */ - NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000 -}; -static inline unsigned NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(unsigned n) -{ - /* NI 660x-specific */ - return 0x10 + n; -} -static inline unsigned NI_GPCT_RTSI_CLOCK_SRC_BITS(unsigned n) -{ - return 0x18 + n; -} -static inline unsigned NI_GPCT_PFI_CLOCK_SRC_BITS(unsigned n) -{ - /* no pfi on NI 660x */ - return 0x20 + n; -} + enum ni_gpct_clock_source_bits { + NI_GPCT_CLOCK_SRC_SELECT_MASK = 0x3f, + NI_GPCT_TIMEBASE_1_CLOCK_SRC_BITS = 0x0, + NI_GPCT_TIMEBASE_2_CLOCK_SRC_BITS = 0x1, + NI_GPCT_TIMEBASE_3_CLOCK_SRC_BITS = 0x2, + NI_GPCT_LOGIC_LOW_CLOCK_SRC_BITS = 0x3, + NI_GPCT_NEXT_GATE_CLOCK_SRC_BITS = 0x4, + NI_GPCT_NEXT_TC_CLOCK_SRC_BITS = 0x5, + NI_GPCT_SOURCE_PIN_i_CLOCK_SRC_BITS = 0x6, /* NI 660x-specific */ + NI_GPCT_PXI10_CLOCK_SRC_BITS = 0x7, + NI_GPCT_PXI_STAR_TRIGGER_CLOCK_SRC_BITS = 0x8, + NI_GPCT_ANALOG_TRIGGER_OUT_CLOCK_SRC_BITS = 0x9, + NI_GPCT_PRESCALE_MODE_CLOCK_SRC_MASK = 0x30000000, + NI_GPCT_NO_PRESCALE_CLOCK_SRC_BITS = 0x0, + NI_GPCT_PRESCALE_X2_CLOCK_SRC_BITS = 0x10000000, /* divide source by 2 */ + NI_GPCT_PRESCALE_X8_CLOCK_SRC_BITS = 0x20000000, /* divide source by 8 */ + NI_GPCT_INVERT_CLOCK_SRC_BIT = 0x80000000 + }; + static inline unsigned NI_GPCT_SOURCE_PIN_CLOCK_SRC_BITS(unsigned n) { + /* NI 660x-specific */ + return 0x10 + n; + } + static inline unsigned NI_GPCT_RTSI_CLOCK_SRC_BITS(unsigned n) { + return 0x18 + n; + } + static inline unsigned NI_GPCT_PFI_CLOCK_SRC_BITS(unsigned n) { + /* no pfi on NI 660x */ + return 0x20 + n; + } /* Possibilities for setting a gate source with INSN_CONFIG_SET_GATE_SRC when using NI general-purpose counters. May be bitwise-or'd with CR_EDGE or CR_INVERT. */ -enum ni_gpct_gate_select { - /* m-series gates */ - NI_GPCT_TIMESTAMP_MUX_GATE_SELECT = 0x0, - NI_GPCT_AI_START2_GATE_SELECT = 0x12, - NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT = 0x13, - NI_GPCT_NEXT_OUT_GATE_SELECT = 0x14, - NI_GPCT_AI_START1_GATE_SELECT = 0x1c, - NI_GPCT_NEXT_SOURCE_GATE_SELECT = 0x1d, - NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT = 0x1e, - NI_GPCT_LOGIC_LOW_GATE_SELECT = 0x1f, - /* more gates for 660x */ - NI_GPCT_SOURCE_PIN_i_GATE_SELECT = 0x100, - NI_GPCT_GATE_PIN_i_GATE_SELECT = 0x101, - /* more gates for 660x "second gate" */ - NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201, - NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e, - /* m-series "second gate" sources are unknown, - we should add them here with an offset of 0x300 when known. */ - NI_GPCT_DISABLED_GATE_SELECT = 0x8000, -}; -static inline unsigned NI_GPCT_GATE_PIN_GATE_SELECT(unsigned n) -{ - return 0x102 + n; -} -static inline unsigned NI_GPCT_RTSI_GATE_SELECT(unsigned n) -{ - return NI_USUAL_RTSI_SELECT(n); -} -static inline unsigned NI_GPCT_PFI_GATE_SELECT(unsigned n) -{ - return NI_USUAL_PFI_SELECT(n); -} -static inline unsigned NI_GPCT_UP_DOWN_PIN_GATE_SELECT(unsigned n) -{ - return 0x202 + n; -} + enum ni_gpct_gate_select { + /* m-series gates */ + NI_GPCT_TIMESTAMP_MUX_GATE_SELECT = 0x0, + NI_GPCT_AI_START2_GATE_SELECT = 0x12, + NI_GPCT_PXI_STAR_TRIGGER_GATE_SELECT = 0x13, + NI_GPCT_NEXT_OUT_GATE_SELECT = 0x14, + NI_GPCT_AI_START1_GATE_SELECT = 0x1c, + NI_GPCT_NEXT_SOURCE_GATE_SELECT = 0x1d, + NI_GPCT_ANALOG_TRIGGER_OUT_GATE_SELECT = 0x1e, + NI_GPCT_LOGIC_LOW_GATE_SELECT = 0x1f, + /* more gates for 660x */ + NI_GPCT_SOURCE_PIN_i_GATE_SELECT = 0x100, + NI_GPCT_GATE_PIN_i_GATE_SELECT = 0x101, + /* more gates for 660x "second gate" */ + NI_GPCT_UP_DOWN_PIN_i_GATE_SELECT = 0x201, + NI_GPCT_SELECTED_GATE_GATE_SELECT = 0x21e, + /* m-series "second gate" sources are unknown, + we should add them here with an offset of 0x300 when known. */ + NI_GPCT_DISABLED_GATE_SELECT = 0x8000, + }; + static inline unsigned NI_GPCT_GATE_PIN_GATE_SELECT(unsigned n) { + return 0x102 + n; + } + static inline unsigned NI_GPCT_RTSI_GATE_SELECT(unsigned n) { + return NI_USUAL_RTSI_SELECT(n); + } + static inline unsigned NI_GPCT_PFI_GATE_SELECT(unsigned n) { + return NI_USUAL_PFI_SELECT(n); + } + static inline unsigned NI_GPCT_UP_DOWN_PIN_GATE_SELECT(unsigned n) { + return 0x202 + n; + } /* Possibilities for setting a source with INSN_CONFIG_SET_OTHER_SRC when using NI general-purpose counters. */ -enum ni_gpct_other_index { - NI_GPCT_SOURCE_ENCODER_A, - NI_GPCT_SOURCE_ENCODER_B, - NI_GPCT_SOURCE_ENCODER_Z -}; -enum ni_gpct_other_select { - /* m-series gates */ - /* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */ - NI_GPCT_DISABLED_OTHER_SELECT = 0x8000, -}; -static inline unsigned NI_GPCT_PFI_OTHER_SELECT(unsigned n) -{ - return NI_USUAL_PFI_SELECT(n); -} + enum ni_gpct_other_index { + NI_GPCT_SOURCE_ENCODER_A, + NI_GPCT_SOURCE_ENCODER_B, + NI_GPCT_SOURCE_ENCODER_Z + }; + enum ni_gpct_other_select { + /* m-series gates */ + /* Still unknown, probably only need NI_GPCT_PFI_OTHER_SELECT */ + NI_GPCT_DISABLED_OTHER_SELECT = 0x8000, + }; + static inline unsigned NI_GPCT_PFI_OTHER_SELECT(unsigned n) { + return NI_USUAL_PFI_SELECT(n); + } /* start sources for ni general-purpose counters for use with INSN_CONFIG_ARM */ -enum ni_gpct_arm_source { - NI_GPCT_ARM_IMMEDIATE = 0x0, - NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1, /* Start both the counter and - the adjacent paired counter - simultaneously */ - /* NI doesn't document bits for selecting hardware arm triggers. If - * the NI_GPCT_ARM_UNKNOWN bit is set, we will pass the least - * significant bits (3 bits for 660x or 5 bits for m-series) through to - * the hardware. This will at least allow someone to figure out what - * the bits do later. */ - NI_GPCT_ARM_UNKNOWN = 0x1000, -}; + enum ni_gpct_arm_source { + NI_GPCT_ARM_IMMEDIATE = 0x0, + NI_GPCT_ARM_PAIRED_IMMEDIATE = 0x1, /* Start both the counter and + the adjacent paired counter + simultaneously */ + /* NI doesn't document bits for selecting hardware arm triggers. If + * the NI_GPCT_ARM_UNKNOWN bit is set, we will pass the least + * significant bits (3 bits for 660x or 5 bits for m-series) through to + * the hardware. This will at least allow someone to figure out what + * the bits do later. */ + NI_GPCT_ARM_UNKNOWN = 0x1000, + }; /* digital filtering options for ni 660x for use with INSN_CONFIG_FILTER. */ -enum ni_gpct_filter_select { - NI_GPCT_FILTER_OFF = 0x0, - NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1, - NI_GPCT_FILTER_100x_TIMEBASE_1 = 0x2, - NI_GPCT_FILTER_20x_TIMEBASE_1 = 0x3, - NI_GPCT_FILTER_10x_TIMEBASE_1 = 0x4, - NI_GPCT_FILTER_2x_TIMEBASE_1 = 0x5, - NI_GPCT_FILTER_2x_TIMEBASE_3 = 0x6 -}; + enum ni_gpct_filter_select { + NI_GPCT_FILTER_OFF = 0x0, + NI_GPCT_FILTER_TIMEBASE_3_SYNC = 0x1, + NI_GPCT_FILTER_100x_TIMEBASE_1 = 0x2, + NI_GPCT_FILTER_20x_TIMEBASE_1 = 0x3, + NI_GPCT_FILTER_10x_TIMEBASE_1 = 0x4, + NI_GPCT_FILTER_2x_TIMEBASE_1 = 0x5, + NI_GPCT_FILTER_2x_TIMEBASE_3 = 0x6 + }; /* PFI digital filtering options for ni m-series for use with * INSN_CONFIG_FILTER. */ -enum ni_pfi_filter_select { - NI_PFI_FILTER_OFF = 0x0, - NI_PFI_FILTER_125ns = 0x1, - NI_PFI_FILTER_6425ns = 0x2, - NI_PFI_FILTER_2550us = 0x3 -}; + enum ni_pfi_filter_select { + NI_PFI_FILTER_OFF = 0x0, + NI_PFI_FILTER_125ns = 0x1, + NI_PFI_FILTER_6425ns = 0x2, + NI_PFI_FILTER_2550us = 0x3 + }; /* master clock sources for ni mio boards and INSN_CONFIG_SET_CLOCK_SRC */ -enum ni_mio_clock_source { - NI_MIO_INTERNAL_CLOCK = 0, - NI_MIO_RTSI_CLOCK = 1, /* doesn't work for m-series, use - NI_MIO_PLL_RTSI_CLOCK() */ - /* the NI_MIO_PLL_* sources are m-series only */ - NI_MIO_PLL_PXI_STAR_TRIGGER_CLOCK = 2, - NI_MIO_PLL_PXI10_CLOCK = 3, - NI_MIO_PLL_RTSI0_CLOCK = 4 -}; -static inline unsigned NI_MIO_PLL_RTSI_CLOCK(unsigned rtsi_channel) -{ - return NI_MIO_PLL_RTSI0_CLOCK + rtsi_channel; -} + enum ni_mio_clock_source { + NI_MIO_INTERNAL_CLOCK = 0, + NI_MIO_RTSI_CLOCK = 1, /* doesn't work for m-series, use + NI_MIO_PLL_RTSI_CLOCK() */ + /* the NI_MIO_PLL_* sources are m-series only */ + NI_MIO_PLL_PXI_STAR_TRIGGER_CLOCK = 2, + NI_MIO_PLL_PXI10_CLOCK = 3, + NI_MIO_PLL_RTSI0_CLOCK = 4 + }; + static inline unsigned NI_MIO_PLL_RTSI_CLOCK(unsigned rtsi_channel) { + return NI_MIO_PLL_RTSI0_CLOCK + rtsi_channel; + } /* Signals which can be routed to an NI RTSI pin with INSN_CONFIG_SET_ROUTING. The numbers assigned are not arbitrary, they correspond to the bits required to program the board. */ -enum ni_rtsi_routing { - NI_RTSI_OUTPUT_ADR_START1 = 0, - NI_RTSI_OUTPUT_ADR_START2 = 1, - NI_RTSI_OUTPUT_SCLKG = 2, - NI_RTSI_OUTPUT_DACUPDN = 3, - NI_RTSI_OUTPUT_DA_START1 = 4, - NI_RTSI_OUTPUT_G_SRC0 = 5, - NI_RTSI_OUTPUT_G_GATE0 = 6, - NI_RTSI_OUTPUT_RGOUT0 = 7, - NI_RTSI_OUTPUT_RTSI_BRD_0 = 8, - NI_RTSI_OUTPUT_RTSI_OSC = 12 /* pre-m-series always have RTSI clock - on line 7 */ -}; -static inline unsigned NI_RTSI_OUTPUT_RTSI_BRD(unsigned n) -{ - return NI_RTSI_OUTPUT_RTSI_BRD_0 + n; -} + enum ni_rtsi_routing { + NI_RTSI_OUTPUT_ADR_START1 = 0, + NI_RTSI_OUTPUT_ADR_START2 = 1, + NI_RTSI_OUTPUT_SCLKG = 2, + NI_RTSI_OUTPUT_DACUPDN = 3, + NI_RTSI_OUTPUT_DA_START1 = 4, + NI_RTSI_OUTPUT_G_SRC0 = 5, + NI_RTSI_OUTPUT_G_GATE0 = 6, + NI_RTSI_OUTPUT_RGOUT0 = 7, + NI_RTSI_OUTPUT_RTSI_BRD_0 = 8, + NI_RTSI_OUTPUT_RTSI_OSC = 12 /* pre-m-series always have RTSI clock + on line 7 */ + }; + static inline unsigned NI_RTSI_OUTPUT_RTSI_BRD(unsigned n) { + return NI_RTSI_OUTPUT_RTSI_BRD_0 + n; + } /* Signals which can be routed to an NI PFI pin on an m-series board with * INSN_CONFIG_SET_ROUTING. These numbers are also returned by * INSN_CONFIG_GET_ROUTING on pre-m-series boards, even though their routing * cannot be changed. The numbers assigned are not arbitrary, they correspond * to the bits required to program the board. */ -enum ni_pfi_routing { - NI_PFI_OUTPUT_PFI_DEFAULT = 0, - NI_PFI_OUTPUT_AI_START1 = 1, - NI_PFI_OUTPUT_AI_START2 = 2, - NI_PFI_OUTPUT_AI_CONVERT = 3, - NI_PFI_OUTPUT_G_SRC1 = 4, - NI_PFI_OUTPUT_G_GATE1 = 5, - NI_PFI_OUTPUT_AO_UPDATE_N = 6, - NI_PFI_OUTPUT_AO_START1 = 7, - NI_PFI_OUTPUT_AI_START_PULSE = 8, - NI_PFI_OUTPUT_G_SRC0 = 9, - NI_PFI_OUTPUT_G_GATE0 = 10, - NI_PFI_OUTPUT_EXT_STROBE = 11, - NI_PFI_OUTPUT_AI_EXT_MUX_CLK = 12, - NI_PFI_OUTPUT_GOUT0 = 13, - NI_PFI_OUTPUT_GOUT1 = 14, - NI_PFI_OUTPUT_FREQ_OUT = 15, - NI_PFI_OUTPUT_PFI_DO = 16, - NI_PFI_OUTPUT_I_ATRIG = 17, - NI_PFI_OUTPUT_RTSI0 = 18, - NI_PFI_OUTPUT_PXI_STAR_TRIGGER_IN = 26, - NI_PFI_OUTPUT_SCXI_TRIG1 = 27, - NI_PFI_OUTPUT_DIO_CHANGE_DETECT_RTSI = 28, - NI_PFI_OUTPUT_CDI_SAMPLE = 29, - NI_PFI_OUTPUT_CDO_UPDATE = 30 -}; -static inline unsigned NI_PFI_OUTPUT_RTSI(unsigned rtsi_channel) -{ - return NI_PFI_OUTPUT_RTSI0 + rtsi_channel; -} + enum ni_pfi_routing { + NI_PFI_OUTPUT_PFI_DEFAULT = 0, + NI_PFI_OUTPUT_AI_START1 = 1, + NI_PFI_OUTPUT_AI_START2 = 2, + NI_PFI_OUTPUT_AI_CONVERT = 3, + NI_PFI_OUTPUT_G_SRC1 = 4, + NI_PFI_OUTPUT_G_GATE1 = 5, + NI_PFI_OUTPUT_AO_UPDATE_N = 6, + NI_PFI_OUTPUT_AO_START1 = 7, + NI_PFI_OUTPUT_AI_START_PULSE = 8, + NI_PFI_OUTPUT_G_SRC0 = 9, + NI_PFI_OUTPUT_G_GATE0 = 10, + NI_PFI_OUTPUT_EXT_STROBE = 11, + NI_PFI_OUTPUT_AI_EXT_MUX_CLK = 12, + NI_PFI_OUTPUT_GOUT0 = 13, + NI_PFI_OUTPUT_GOUT1 = 14, + NI_PFI_OUTPUT_FREQ_OUT = 15, + NI_PFI_OUTPUT_PFI_DO = 16, + NI_PFI_OUTPUT_I_ATRIG = 17, + NI_PFI_OUTPUT_RTSI0 = 18, + NI_PFI_OUTPUT_PXI_STAR_TRIGGER_IN = 26, + NI_PFI_OUTPUT_SCXI_TRIG1 = 27, + NI_PFI_OUTPUT_DIO_CHANGE_DETECT_RTSI = 28, + NI_PFI_OUTPUT_CDI_SAMPLE = 29, + NI_PFI_OUTPUT_CDO_UPDATE = 30 + }; + static inline unsigned NI_PFI_OUTPUT_RTSI(unsigned rtsi_channel) { + return NI_PFI_OUTPUT_RTSI0 + rtsi_channel; + } /* Signals which can be routed to output on a NI PFI pin on a 660x board with INSN_CONFIG_SET_ROUTING. The numbers assigned are @@ -785,72 +768,67 @@ static inline unsigned NI_PFI_OUTPUT_RTSI(unsigned rtsi_channel) to program the board. Lines 0 to 7 can only be set to NI_660X_PFI_OUTPUT_DIO. Lines 32 to 39 can only be set to NI_660X_PFI_OUTPUT_COUNTER. */ -enum ni_660x_pfi_routing { - NI_660X_PFI_OUTPUT_COUNTER = 1, /* counter */ - NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */ -}; + enum ni_660x_pfi_routing { + NI_660X_PFI_OUTPUT_COUNTER = 1, /* counter */ + NI_660X_PFI_OUTPUT_DIO = 2, /* static digital output */ + }; /* NI External Trigger lines. These values are not arbitrary, but are related * to the bits required to program the board (offset by 1 for historical * reasons). */ -static inline unsigned NI_EXT_PFI(unsigned pfi_channel) -{ - return NI_USUAL_PFI_SELECT(pfi_channel) - 1; -} -static inline unsigned NI_EXT_RTSI(unsigned rtsi_channel) -{ - return NI_USUAL_RTSI_SELECT(rtsi_channel) - 1; -} + static inline unsigned NI_EXT_PFI(unsigned pfi_channel) { + return NI_USUAL_PFI_SELECT(pfi_channel) - 1; + } + static inline unsigned NI_EXT_RTSI(unsigned rtsi_channel) { + return NI_USUAL_RTSI_SELECT(rtsi_channel) - 1; + } /* status bits for INSN_CONFIG_GET_COUNTER_STATUS */ -enum comedi_counter_status_flags { - COMEDI_COUNTER_ARMED = 0x1, - COMEDI_COUNTER_COUNTING = 0x2, - COMEDI_COUNTER_TERMINAL_COUNT = 0x4, -}; + enum comedi_counter_status_flags { + COMEDI_COUNTER_ARMED = 0x1, + COMEDI_COUNTER_COUNTING = 0x2, + COMEDI_COUNTER_TERMINAL_COUNT = 0x4, + }; /* Clock sources for CDIO subdevice on NI m-series boards. Used as the * scan_begin_arg for a comedi_command. These sources may also be bitwise-or'd * with CR_INVERT to change polarity. */ -enum ni_m_series_cdio_scan_begin_src { - NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0, - NI_CDIO_SCAN_BEGIN_SRC_AI_START = 18, - NI_CDIO_SCAN_BEGIN_SRC_AI_CONVERT = 19, - NI_CDIO_SCAN_BEGIN_SRC_PXI_STAR_TRIGGER = 20, - NI_CDIO_SCAN_BEGIN_SRC_G0_OUT = 28, - NI_CDIO_SCAN_BEGIN_SRC_G1_OUT = 29, - NI_CDIO_SCAN_BEGIN_SRC_ANALOG_TRIGGER = 30, - NI_CDIO_SCAN_BEGIN_SRC_AO_UPDATE = 31, - NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32, - NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33 -}; -static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel) -{ - return NI_USUAL_PFI_SELECT(pfi_channel); -} -static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel) -{ - return NI_USUAL_RTSI_SELECT(rtsi_channel); -} + enum ni_m_series_cdio_scan_begin_src { + NI_CDIO_SCAN_BEGIN_SRC_GROUND = 0, + NI_CDIO_SCAN_BEGIN_SRC_AI_START = 18, + NI_CDIO_SCAN_BEGIN_SRC_AI_CONVERT = 19, + NI_CDIO_SCAN_BEGIN_SRC_PXI_STAR_TRIGGER = 20, + NI_CDIO_SCAN_BEGIN_SRC_G0_OUT = 28, + NI_CDIO_SCAN_BEGIN_SRC_G1_OUT = 29, + NI_CDIO_SCAN_BEGIN_SRC_ANALOG_TRIGGER = 30, + NI_CDIO_SCAN_BEGIN_SRC_AO_UPDATE = 31, + NI_CDIO_SCAN_BEGIN_SRC_FREQ_OUT = 32, + NI_CDIO_SCAN_BEGIN_SRC_DIO_CHANGE_DETECT_IRQ = 33 + }; + static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel) { + return NI_USUAL_PFI_SELECT(pfi_channel); + } + static inline unsigned NI_CDIO_SCAN_BEGIN_SRC_RTSI(unsigned + rtsi_channel) { + return NI_USUAL_RTSI_SELECT(rtsi_channel); + } /* scan_begin_src for scan_begin_arg==TRIG_EXT with analog output command on NI * boards. These scan begin sources can also be bitwise-or'd with CR_INVERT to * change polarity. */ -static inline unsigned NI_AO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel) -{ - return NI_USUAL_PFI_SELECT(pfi_channel); -} -static inline unsigned NI_AO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel) -{ - return NI_USUAL_RTSI_SELECT(rtsi_channel); -} + static inline unsigned NI_AO_SCAN_BEGIN_SRC_PFI(unsigned pfi_channel) { + return NI_USUAL_PFI_SELECT(pfi_channel); + } + static inline unsigned NI_AO_SCAN_BEGIN_SRC_RTSI(unsigned rtsi_channel) { + return NI_USUAL_RTSI_SELECT(rtsi_channel); + } /* Bits for setting a clock source with * INSN_CONFIG_SET_CLOCK_SRC when using NI frequency output subdevice. */ -enum ni_freq_out_clock_source_bits { - NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC, /* 10 MHz */ - NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC /* 100 KHz */ -}; + enum ni_freq_out_clock_source_bits { + NI_FREQ_OUT_TIMEBASE_1_DIV_2_CLOCK_SRC, /* 10 MHz */ + NI_FREQ_OUT_TIMEBASE_2_CLOCK_SRC /* 100 KHz */ + }; /* Values for setting a clock source with INSN_CONFIG_SET_CLOCK_SRC for * 8254 counter subdevices on Amplicon DIO boards (amplc_dio200 driver). */ |