diff options
Diffstat (limited to 'drivers/staging/rtl8188eu/include/rtw_led.h')
-rw-r--r-- | drivers/staging/rtl8188eu/include/rtw_led.h | 119 |
1 files changed, 23 insertions, 96 deletions
diff --git a/drivers/staging/rtl8188eu/include/rtw_led.h b/drivers/staging/rtl8188eu/include/rtw_led.h index 0da4e27a70fa..c5194b620da4 100644 --- a/drivers/staging/rtl8188eu/include/rtw_led.h +++ b/drivers/staging/rtl8188eu/include/rtw_led.h @@ -23,92 +23,43 @@ #include <osdep_service.h> #include <drv_types.h> -#define MSECS(t) (HZ * ((t) / 1000) + (HZ * ((t) % 1000)) / 1000) - -#define LED_BLINK_NORMAL_INTERVAL 100 -#define LED_BLINK_SLOWLY_INTERVAL 200 -#define LED_BLINK_LONG_INTERVAL 400 - #define LED_BLINK_NO_LINK_INTERVAL_ALPHA 1000 #define LED_BLINK_LINK_INTERVAL_ALPHA 500 /* 500 */ #define LED_BLINK_SCAN_INTERVAL_ALPHA 180 /* 150 */ #define LED_BLINK_FASTER_INTERVAL_ALPHA 50 #define LED_BLINK_WPS_SUCESS_INTERVAL_ALPHA 5000 -#define LED_BLINK_NORMAL_INTERVAL_NETTRONIX 100 -#define LED_BLINK_SLOWLY_INTERVAL_NETTRONIX 2000 - -#define LED_BLINK_SLOWLY_INTERVAL_PORNET 1000 -#define LED_BLINK_NORMAL_INTERVAL_PORNET 100 - -#define LED_BLINK_FAST_INTERVAL_BITLAND 30 - -/* 060403, rcnjko: Customized for AzWave. */ -#define LED_CM2_BLINK_ON_INTERVAL 250 -#define LED_CM2_BLINK_OFF_INTERVAL 4750 - -#define LED_CM8_BLINK_INTERVAL 500 /* for QMI */ -#define LED_CM8_BLINK_OFF_INTERVAL 3750 /* for QMI */ - -/* 080124, lanhsin: Customized for RunTop */ -#define LED_RunTop_BLINK_INTERVAL 300 - -/* 060421, rcnjko: Customized for Sercomm Printer Server case. */ -#define LED_CM3_BLINK_INTERVAL 1500 - enum LED_CTL_MODE { - LED_CTL_POWER_ON = 1, - LED_CTL_LINK = 2, - LED_CTL_NO_LINK = 3, - LED_CTL_TX = 4, - LED_CTL_RX = 5, - LED_CTL_SITE_SURVEY = 6, - LED_CTL_POWER_OFF = 7, - LED_CTL_START_TO_LINK = 8, - LED_CTL_START_WPS = 9, - LED_CTL_STOP_WPS = 10, - LED_CTL_START_WPS_BOTTON = 11, /* added for runtop */ - LED_CTL_STOP_WPS_FAIL = 12, /* added for ALPHA */ - LED_CTL_STOP_WPS_FAIL_OVERLAP = 13, /* added for BELKIN */ - LED_CTL_CONNECTION_NO_TRANSFER = 14, + LED_CTL_POWER_ON, + LED_CTL_LINK, + LED_CTL_NO_LINK, + LED_CTL_TX, + LED_CTL_RX , + LED_CTL_SITE_SURVEY, + LED_CTL_POWER_OFF, + LED_CTL_START_TO_LINK, + LED_CTL_START_WPS, + LED_CTL_STOP_WPS, + LED_CTL_START_WPS_BOTTON, + LED_CTL_STOP_WPS_FAIL }; enum LED_STATE_871x { - LED_UNKNOWN = 0, - RTW_LED_ON = 1, - RTW_LED_OFF = 2, - LED_BLINK_NORMAL = 3, - LED_BLINK_SLOWLY = 4, - LED_BLINK_POWER_ON = 5, - LED_BLINK_SCAN = 6, /* LED is blinking during scanning period, - * the # of times to blink is depend on time - * for scanning. */ - LED_BLINK_NO_LINK = 7, /* LED is blinking during no link state. */ - LED_BLINK_StartToBlink = 8,/* Customzied for Sercomm Printer - * Server case */ - LED_BLINK_TXRX = 9, - LED_BLINK_WPS = 10, /* LED is blinkg during WPS communication */ - LED_BLINK_WPS_STOP = 11, /* for ALPHA */ - LED_BLINK_WPS_STOP_OVERLAP = 12, /* for BELKIN */ - LED_BLINK_RUNTOP = 13, /* Customized for RunTop */ - LED_BLINK_CAMEO = 14, - LED_BLINK_XAVI = 15, - LED_BLINK_ALWAYS_ON = 16, -}; - -enum LED_PIN_871x { - LED_PIN_NULL = 0, - LED_PIN_LED0 = 1, - LED_PIN_LED1 = 2, - LED_PIN_LED2 = 3, - LED_PIN_GPIO0 = 4, + LED_UNKNOWN, + RTW_LED_ON, + RTW_LED_OFF, + LED_BLINK_NORMAL, + LED_BLINK_SLOWLY, + LED_BLINK_POWER_ON, + LED_BLINK_SCAN, + LED_BLINK_TXRX, + LED_BLINK_WPS, + LED_BLINK_WPS_STOP }; struct LED_871x { struct adapter *padapter; - enum LED_PIN_871x LedPin; /* Identify how to implement this - * SW led. */ enum LED_STATE_871x CurrLedState; /* Current LED state. */ enum LED_STATE_871x BlinkingLedState; /* Next state for blinking, * either RTW_LED_ON or RTW_LED_OFF are. */ @@ -139,34 +90,11 @@ struct LED_871x { ((struct LED_871x *)_LED_871x)->CurrLedState == LED_BLINK_WPS_STOP || \ ((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress) -#define IS_LED_BLINKING(_LED_871x) \ - (((struct LED_871x *)_LED_871x)->bLedWPSBlinkInProgress || \ - ((struct LED_871x *)_LED_871x)->bLedScanBlinkInProgress) - -/* LED customization. */ - -enum LED_STRATEGY_871x { - SW_LED_MODE0 = 0, /* SW control 1 LED via GPIO0. It is default option.*/ - SW_LED_MODE1 = 1, /* 2 LEDs, through LED0 and LED1. For ALPHA. */ - SW_LED_MODE2 = 2, /* SW control 1 LED via GPIO0, customized for AzWave - * 8187 minicard. */ - SW_LED_MODE3 = 3, /* SW control 1 LED via GPIO0, customized for Sercomm - * Printer Server case. */ - SW_LED_MODE4 = 4, /* for Edimax / Belkin */ - SW_LED_MODE5 = 5, /* for Sercomm / Belkin */ - SW_LED_MODE6 = 6, /* for 88CU minicard, porting from ce SW_LED_MODE7 */ - HW_LED = 50, /* HW control 2 LEDs, LED0 and LED1 (there are 4 - * different control modes, see MAC.CONFIG1 for details.)*/ - LED_ST_NONE = 99, -}; - void LedControl8188eu(struct adapter *padapter, enum LED_CTL_MODE LedAction); struct led_priv{ /* add for led control */ struct LED_871x SwLed0; - struct LED_871x SwLed1; - enum LED_STRATEGY_871x LedStrategy; u8 bRegUseLed; void (*LedControlHandler)(struct adapter *padapter, enum LED_CTL_MODE LedAction); @@ -184,8 +112,7 @@ void BlinkWorkItemCallback(struct work_struct *work); void ResetLedStatus(struct LED_871x *pLed); -void InitLed871x(struct adapter *padapter, struct LED_871x *pLed, - enum LED_PIN_871x LedPin); +void InitLed871x(struct adapter *padapter, struct LED_871x *pLed); void DeInitLed871x(struct LED_871x *pLed); |