diff options
Diffstat (limited to 'drivers/thermal')
24 files changed, 1963 insertions, 700 deletions
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index ef5587fe2c69..f554d25b4399 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -84,6 +84,16 @@ config THERMAL_GOV_STEP_WISE Enable this to manage platform thermals using a simple linear governor. +config THERMAL_GOV_BANG_BANG + bool "Bang Bang thermal governor" + default n + help + Enable this to manage platform thermals using bang bang governor. + + Say 'Y' here if you want to use two point temperature regulation + used for fans without throttling. Some fan drivers depend on this + governor to be enabled (e.g. acerhdf). + config THERMAL_GOV_USER_SPACE bool "User_space thermal governor" help @@ -207,21 +217,6 @@ config X86_PKG_TEMP_THERMAL two trip points which can be set by user to get notifications via thermal notification methods. -config ACPI_INT3403_THERMAL - tristate "ACPI INT3403 thermal driver" - depends on X86 && ACPI - help - Newer laptops and tablets that use ACPI may have thermal sensors - outside the core CPU/SOC for thermal safety reasons. These - temperature sensors are also exposed for the OS to use via the so - called INT3403 ACPI object. This driver will, on devices that have - such sensors, expose the temperature information from these sensors - to userspace via the normal thermal framework. This means that a wide - range of applications and GUI widgets can show this information to - the user or use this information for making decisions. For example, - the Intel Thermal Daemon can use this information to allow the user - to select his laptop to run without turning on the fans. - config INTEL_SOC_DTS_THERMAL tristate "Intel SoCs DTS thermal driver" depends on X86 && IOSF_MBI @@ -234,6 +229,30 @@ config INTEL_SOC_DTS_THERMAL notification methods.The other trip is a critical trip point, which was set by the driver based on the TJ MAX temperature. +config INT340X_THERMAL + tristate "ACPI INT340X thermal drivers" + depends on X86 && ACPI + select THERMAL_GOV_USER_SPACE + select ACPI_THERMAL_REL + select ACPI_FAN + help + Newer laptops and tablets that use ACPI may have thermal sensors and + other devices with thermal control capabilities outside the core + CPU/SOC, for thermal safety reasons. + They are exposed for the OS to use via the INT3400 ACPI device object + as the master, and INT3401~INT340B ACPI device objects as the slaves. + Enable this to expose the temperature information and cooling ability + from these objects to userspace via the normal thermal framework. + This means that a wide range of applications and GUI widgets can show + the information to the user or use this information for making + decisions. For example, the Intel Thermal Daemon can use this + information to allow the user to select his laptop to run without + turning on the fans. + +config ACPI_THERMAL_REL + tristate + depends on ACPI + menu "Texas Instruments thermal drivers" source "drivers/thermal/ti-soc-thermal/Kconfig" endmenu diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 31e232f84b6b..39c4fe87da2f 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -11,6 +11,7 @@ thermal_sys-$(CONFIG_THERMAL_OF) += of-thermal.o # governors thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o +thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o @@ -31,5 +32,5 @@ obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ -obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o +obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ obj-$(CONFIG_ST_THERMAL) += st/ diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c index 1ab0018271c5..ad09e51ffae4 100644 --- a/drivers/thermal/cpu_cooling.c +++ b/drivers/thermal/cpu_cooling.c @@ -50,15 +50,14 @@ struct cpufreq_cooling_device { unsigned int cpufreq_state; unsigned int cpufreq_val; struct cpumask allowed_cpus; + struct list_head node; }; static DEFINE_IDR(cpufreq_idr); static DEFINE_MUTEX(cooling_cpufreq_lock); static unsigned int cpufreq_dev_count; -/* notify_table passes value to the CPUFREQ_ADJUST callback function. */ -#define NOTIFY_INVALID NULL -static struct cpufreq_cooling_device *notify_device; +static LIST_HEAD(cpufreq_dev_list); /** * get_idr - function to get a unique id. @@ -287,15 +286,12 @@ static int cpufreq_apply_cooling(struct cpufreq_cooling_device *cpufreq_device, cpufreq_device->cpufreq_state = cooling_state; cpufreq_device->cpufreq_val = clip_freq; - notify_device = cpufreq_device; for_each_cpu(cpuid, mask) { if (is_cpufreq_valid(cpuid)) cpufreq_update_policy(cpuid); } - notify_device = NOTIFY_INVALID; - return 0; } @@ -316,21 +312,28 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb, { struct cpufreq_policy *policy = data; unsigned long max_freq = 0; + struct cpufreq_cooling_device *cpufreq_dev; - if (event != CPUFREQ_ADJUST || notify_device == NOTIFY_INVALID) + if (event != CPUFREQ_ADJUST) return 0; - if (cpumask_test_cpu(policy->cpu, ¬ify_device->allowed_cpus)) - max_freq = notify_device->cpufreq_val; - else - return 0; + mutex_lock(&cooling_cpufreq_lock); + list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) { + if (!cpumask_test_cpu(policy->cpu, + &cpufreq_dev->allowed_cpus)) + continue; + + if (!cpufreq_dev->cpufreq_val) + cpufreq_dev->cpufreq_val = get_cpu_frequency( + cpumask_any(&cpufreq_dev->allowed_cpus), + cpufreq_dev->cpufreq_state); - /* Never exceed user_policy.max */ - if (max_freq > policy->user_policy.max) - max_freq = policy->user_policy.max; + max_freq = cpufreq_dev->cpufreq_val; - if (policy->max != max_freq) - cpufreq_verify_within_limits(policy, 0, max_freq); + if (policy->max != max_freq) + cpufreq_verify_within_limits(policy, 0, max_freq); + } + mutex_unlock(&cooling_cpufreq_lock); return 0; } @@ -486,6 +489,7 @@ __cpufreq_cooling_register(struct device_node *np, cpufreq_register_notifier(&thermal_cpufreq_notifier_block, CPUFREQ_POLICY_NOTIFIER); cpufreq_dev_count++; + list_add(&cpufreq_dev->node, &cpufreq_dev_list); mutex_unlock(&cooling_cpufreq_lock); @@ -549,6 +553,7 @@ void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) cpufreq_dev = cdev->devdata; mutex_lock(&cooling_cpufreq_lock); + list_del(&cpufreq_dev->node); cpufreq_dev_count--; /* Unregister the notifier for the last cpufreq cooling device */ diff --git a/drivers/thermal/fair_share.c b/drivers/thermal/fair_share.c index 944ba2f340c8..6e0a3fbfae86 100644 --- a/drivers/thermal/fair_share.c +++ b/drivers/thermal/fair_share.c @@ -23,6 +23,7 @@ */ #include <linux/thermal.h> +#include <trace/events/thermal.h> #include "thermal_core.h" @@ -34,6 +35,7 @@ static int get_trip_level(struct thermal_zone_device *tz) { int count = 0; unsigned long trip_temp; + enum thermal_trip_type trip_type; if (tz->trips == 0 || !tz->ops->get_trip_temp) return 0; @@ -43,6 +45,16 @@ static int get_trip_level(struct thermal_zone_device *tz) if (tz->temperature < trip_temp) break; } + + /* + * count > 0 only if temperature is greater than first trip + * point, in which case, trip_point = count - 1 + */ + if (count > 0) { + tz->ops->get_trip_type(tz, count - 1, &trip_type); + trace_thermal_zone_trip(tz, count - 1, trip_type); + } + return count; } diff --git a/drivers/thermal/gov_bang_bang.c b/drivers/thermal/gov_bang_bang.c new file mode 100644 index 000000000000..c5dd76b2ee74 --- /dev/null +++ b/drivers/thermal/gov_bang_bang.c @@ -0,0 +1,131 @@ +/* + * gov_bang_bang.c - A simple thermal throttling governor using hysteresis + * + * Copyright (C) 2014 Peter Feuerer <peter@piie.net> + * + * Based on step_wise.c with following Copyrights: + * Copyright (C) 2012 Intel Corp + * Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com> + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See + * the GNU General Public License for more details. + * + */ + +#include <linux/thermal.h> + +#include "thermal_core.h" + +static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) +{ + long trip_temp; + unsigned long trip_hyst; + struct thermal_instance *instance; + + tz->ops->get_trip_temp(tz, trip, &trip_temp); + tz->ops->get_trip_hyst(tz, trip, &trip_hyst); + + dev_dbg(&tz->device, "Trip%d[temp=%ld]:temp=%d:hyst=%ld\n", + trip, trip_temp, tz->temperature, + trip_hyst); + + mutex_lock(&tz->lock); + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) { + if (instance->trip != trip) + continue; + + /* in case fan is in initial state, switch the fan off */ + if (instance->target == THERMAL_NO_TARGET) + instance->target = 0; + + /* in case fan is neither on nor off set the fan to active */ + if (instance->target != 0 && instance->target != 1) { + pr_warn("Thermal instance %s controlled by bang-bang has unexpected state: %ld\n", + instance->name, instance->target); + instance->target = 1; + } + + /* + * enable fan when temperature exceeds trip_temp and disable + * the fan in case it falls below trip_temp minus hysteresis + */ + if (instance->target == 0 && tz->temperature >= trip_temp) + instance->target = 1; + else if (instance->target == 1 && + tz->temperature < trip_temp - trip_hyst) + instance->target = 0; + + dev_dbg(&instance->cdev->device, "target=%d\n", + (int)instance->target); + + instance->cdev->updated = false; /* cdev needs update */ + } + + mutex_unlock(&tz->lock); +} + +/** + * bang_bang_control - controls devices associated with the given zone + * @tz - thermal_zone_device + * @trip - the trip point + * + * Regulation Logic: a two point regulation, deliver cooling state depending + * on the previous state shown in this diagram: + * + * Fan: OFF ON + * + * | + * | + * trip_temp: +---->+ + * | | ^ + * | | | + * | | Temperature + * (trip_temp - hyst): +<----+ + * | + * | + * | + * + * * If the fan is not running and temperature exceeds trip_temp, the fan + * gets turned on. + * * In case the fan is running, temperature must fall below + * (trip_temp - hyst) so that the fan gets turned off again. + * + */ +static int bang_bang_control(struct thermal_zone_device *tz, int trip) +{ + struct thermal_instance *instance; + + thermal_zone_trip_update(tz, trip); + + mutex_lock(&tz->lock); + + list_for_each_entry(instance, &tz->thermal_instances, tz_node) + thermal_cdev_update(instance->cdev); + + mutex_unlock(&tz->lock); + + return 0; +} + +static struct thermal_governor thermal_gov_bang_bang = { + .name = "bang_bang", + .throttle = bang_bang_control, +}; + +int thermal_gov_bang_bang_register(void) +{ + return thermal_register_governor(&thermal_gov_bang_bang); +} + +void thermal_gov_bang_bang_unregister(void) +{ + thermal_unregister_governor(&thermal_gov_bang_bang); +} diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c index 2c516f2eebed..5a1f1070b702 100644 --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -19,6 +19,7 @@ #include <linux/mfd/syscon.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> @@ -31,6 +32,11 @@ #define MISC0 0x0150 #define MISC0_REFTOP_SELBIASOFF (1 << 3) +#define MISC1 0x0160 +#define MISC1_IRQ_TEMPHIGH (1 << 29) +/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */ +#define MISC1_IRQ_TEMPLOW (1 << 28) +#define MISC1_IRQ_TEMPPANIC (1 << 27) #define TEMPSENSE0 0x0180 #define TEMPSENSE0_ALARM_VALUE_SHIFT 20 @@ -43,6 +49,12 @@ #define TEMPSENSE1 0x0190 #define TEMPSENSE1_MEASURE_FREQ 0xffff +/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */ +#define TEMPSENSE2 0x0290 +#define TEMPSENSE2_LOW_VALUE_SHIFT 0 +#define TEMPSENSE2_LOW_VALUE_MASK 0xfff +#define TEMPSENSE2_PANIC_VALUE_SHIFT 16 +#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000 #define OCOTP_ANA1 0x04e0 @@ -66,6 +78,21 @@ enum imx_thermal_trip { #define FACTOR1 15976 #define FACTOR2 4297157 +#define TEMPMON_IMX6Q 1 +#define TEMPMON_IMX6SX 2 + +struct thermal_soc_data { + u32 version; +}; + +static struct thermal_soc_data thermal_imx6q_data = { + .version = TEMPMON_IMX6Q, +}; + +static struct thermal_soc_data thermal_imx6sx_data = { + .version = TEMPMON_IMX6SX, +}; + struct imx_thermal_data { struct thermal_zone_device *tz; struct thermal_cooling_device *cdev; @@ -79,8 +106,21 @@ struct imx_thermal_data { bool irq_enabled; int irq; struct clk *thermal_clk; + const struct thermal_soc_data *socdata; }; +static void imx_set_panic_temp(struct imx_thermal_data *data, + signed long panic_temp) +{ + struct regmap *map = data->tempmon; + int critical_value; + + critical_value = (data->c2 - panic_temp) / data->c1; + regmap_write(map, TEMPSENSE2 + REG_CLR, TEMPSENSE2_PANIC_VALUE_MASK); + regmap_write(map, TEMPSENSE2 + REG_SET, critical_value << + TEMPSENSE2_PANIC_VALUE_SHIFT); +} + static void imx_set_alarm_temp(struct imx_thermal_data *data, signed long alarm_temp) { @@ -142,13 +182,17 @@ static int imx_get_temp(struct thermal_zone_device *tz, unsigned long *temp) /* See imx_get_sensor_data() for formula derivation */ *temp = data->c2 - n_meas * data->c1; - /* Update alarm value to next higher trip point */ - if (data->alarm_temp == data->temp_passive && *temp >= data->temp_passive) - imx_set_alarm_temp(data, data->temp_critical); - if (data->alarm_temp == data->temp_critical && *temp < data->temp_passive) { - imx_set_alarm_temp(data, data->temp_passive); - dev_dbg(&tz->device, "thermal alarm off: T < %lu\n", - data->alarm_temp / 1000); + /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */ + if (data->socdata->version == TEMPMON_IMX6Q) { + if (data->alarm_temp == data->temp_passive && + *temp >= data->temp_passive) + imx_set_alarm_temp(data, data->temp_critical); + if (data->alarm_temp == data->temp_critical && + *temp < data->temp_passive) { + imx_set_alarm_temp(data, data->temp_passive); + dev_dbg(&tz->device, "thermal alarm off: T < %lu\n", + data->alarm_temp / 1000); + } } if (*temp != data->last_temp) { @@ -398,14 +442,27 @@ static irqreturn_t imx_thermal_alarm_irq_thread(int irq, void *dev) return IRQ_HANDLED; } +static const struct of_device_id of_imx_thermal_match[] = { + { .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, }, + { .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, }, + { /* end */ } +}; +MODULE_DEVICE_TABLE(of, of_imx_thermal_match); + static int imx_thermal_probe(struct platform_device *pdev) { + const struct of_device_id *of_id = + of_match_device(of_imx_thermal_match, &pdev->dev); struct imx_thermal_data *data; struct cpumask clip_cpus; struct regmap *map; int measure_freq; int ret; + if (!cpufreq_get_current_driver()) { + dev_dbg(&pdev->dev, "no cpufreq driver!"); + return -EPROBE_DEFER; + } data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; @@ -418,6 +475,20 @@ static int imx_thermal_probe(struct platform_device *pdev) } data->tempmon = map; + data->socdata = of_id->data; + + /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */ + if (data->socdata->version == TEMPMON_IMX6SX) { + regmap_write(map, MISC1 + REG_CLR, MISC1_IRQ_TEMPHIGH | + MISC1_IRQ_TEMPLOW | MISC1_IRQ_TEMPPANIC); + /* + * reset value of LOW ALARM is incorrect, set it to lowest + * value to avoid false trigger of low alarm. + */ + regmap_write(map, TEMPSENSE2 + REG_SET, + TEMPSENSE2_LOW_VALUE_MASK); + } + data->irq = platform_get_irq(pdev, 0); if (data->irq < 0) return data->irq; @@ -454,6 +525,30 @@ static int imx_thermal_probe(struct platform_device *pdev) return ret; } + data->thermal_clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(data->thermal_clk)) { + ret = PTR_ERR(data->thermal_clk); + if (ret != -EPROBE_DEFER) + dev_err(&pdev->dev, + "failed to get thermal clk: %d\n", ret); + cpufreq_cooling_unregister(data->cdev); + return ret; + } + + /* + * Thermal sensor needs clk on to get correct value, normally + * we should enable its clk before taking measurement and disable + * clk after measurement is done, but if alarm function is enabled, + * hardware will auto measure the temperature periodically, so we + * need to keep the clk always on for alarm function. + */ + ret = clk_prepare_enable(data->thermal_clk); + if (ret) { + dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret); + cpufreq_cooling_unregister(data->cdev); + return ret; + } + data->tz = thermal_zone_device_register("imx_thermal_zone", IMX_TRIP_NUM, BIT(IMX_TRIP_PASSIVE), data, @@ -464,31 +559,20 @@ static int imx_thermal_probe(struct platform_device *pdev) ret = PTR_ERR(data->tz); dev_err(&pdev->dev, "failed to register thermal zone device %d\n", ret); + clk_disable_unprepare(data->thermal_clk); cpufreq_cooling_unregister(data->cdev); return ret; } - data->thermal_clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(data->thermal_clk)) { - dev_warn(&pdev->dev, "failed to get thermal clk!\n"); - } else { - /* - * Thermal sensor needs clk on to get correct value, normally - * we should enable its clk before taking measurement and disable - * clk after measurement is done, but if alarm function is enabled, - * hardware will auto measure the temperature periodically, so we - * need to keep the clk always on for alarm function. - */ - ret = clk_prepare_enable(data->thermal_clk); - if (ret) - dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret); - } - /* Enable measurements at ~ 10 Hz */ regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ); measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */ regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq); imx_set_alarm_temp(data, data->temp_passive); + + if (data->socdata->version == TEMPMON_IMX6SX) + imx_set_panic_temp(data, data->temp_critical); + regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN); regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP); @@ -550,12 +634,6 @@ static int imx_thermal_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops, imx_thermal_suspend, imx_thermal_resume); -static const struct of_device_id of_imx_thermal_match[] = { - { .compatible = "fsl,imx6q-tempmon", }, - { /* end */ } -}; -MODULE_DEVICE_TABLE(of, of_imx_thermal_match); - static struct platform_driver imx_thermal = { .driver = { .name = "imx_thermal", diff --git a/drivers/thermal/int3403_thermal.c b/drivers/thermal/int3403_thermal.c deleted file mode 100644 index 17554eeb3953..000000000000 --- a/drivers/thermal/int3403_thermal.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * ACPI INT3403 thermal driver - * Copyright (c) 2013, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/types.h> -#include <linux/acpi.h> -#include <linux/thermal.h> - -#define INT3403_TYPE_SENSOR 0x03 -#define INT3403_PERF_CHANGED_EVENT 0x80 -#define INT3403_THERMAL_EVENT 0x90 - -#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100) -#define KELVIN_OFFSET 2732 -#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off)) - -#define ACPI_INT3403_CLASS "int3403" -#define ACPI_INT3403_FILE_STATE "state" - -struct int3403_sensor { - struct thermal_zone_device *tzone; - unsigned long *thresholds; - unsigned long crit_temp; - int crit_trip_id; - unsigned long psv_temp; - int psv_trip_id; -}; - -static int sys_get_curr_temp(struct thermal_zone_device *tzone, - unsigned long *temp) -{ - struct acpi_device *device = tzone->devdata; - unsigned long long tmp; - acpi_status status; - - status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp); - if (ACPI_FAILURE(status)) - return -EIO; - - *temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET); - - return 0; -} - -static int sys_get_trip_hyst(struct thermal_zone_device *tzone, - int trip, unsigned long *temp) -{ - struct acpi_device *device = tzone->devdata; - unsigned long long hyst; - acpi_status status; - - status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst); - if (ACPI_FAILURE(status)) - return -EIO; - - /* - * Thermal hysteresis represents a temperature difference. - * Kelvin and Celsius have same degree size. So the - * conversion here between tenths of degree Kelvin unit - * and Milli-Celsius unit is just to multiply 100. - */ - *temp = hyst * 100; - - return 0; -} - -static int sys_get_trip_temp(struct thermal_zone_device *tzone, - int trip, unsigned long *temp) -{ - struct acpi_device *device = tzone->devdata; - struct int3403_sensor *obj = acpi_driver_data(device); - - if (trip == obj->crit_trip_id) - *temp = obj->crit_temp; - else if (trip == obj->psv_trip_id) - *temp = obj->psv_temp; - else { - /* - * get_trip_temp is a mandatory callback but - * PATx method doesn't return any value, so return - * cached value, which was last set from user space. - */ - *temp = obj->thresholds[trip]; - } - - return 0; -} - -static int sys_get_trip_type(struct thermal_zone_device *thermal, - int trip, enum thermal_trip_type *type) -{ - struct acpi_device *device = thermal->devdata; - struct int3403_sensor *obj = acpi_driver_data(device); - - /* Mandatory callback, may not mean much here */ - if (trip == obj->crit_trip_id) - *type = THERMAL_TRIP_CRITICAL; - else - *type = THERMAL_TRIP_PASSIVE; - - return 0; -} - -int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip, - unsigned long temp) -{ - struct acpi_device *device = tzone->devdata; - acpi_status status; - char name[10]; - int ret = 0; - struct int3403_sensor *obj = acpi_driver_data(device); - - snprintf(name, sizeof(name), "PAT%d", trip); - if (acpi_has_method(device->handle, name)) { - status = acpi_execute_simple_method(device->handle, name, - MILLI_CELSIUS_TO_DECI_KELVIN(temp, - KELVIN_OFFSET)); - if (ACPI_FAILURE(status)) - ret = -EIO; - else - obj->thresholds[trip] = temp; - } else { - ret = -EIO; - dev_err(&device->dev, "sys_set_trip_temp: method not found\n"); - } - - return ret; -} - -static struct thermal_zone_device_ops tzone_ops = { - .get_temp = sys_get_curr_temp, - .get_trip_temp = sys_get_trip_temp, - .get_trip_type = sys_get_trip_type, - .set_trip_temp = sys_set_trip_temp, - .get_trip_hyst = sys_get_trip_hyst, -}; - -static void acpi_thermal_notify(struct acpi_device *device, u32 event) -{ - struct int3403_sensor *obj; - - if (!device) - return; - - obj = acpi_driver_data(device); - if (!obj) - return; - - switch (event) { - case INT3403_PERF_CHANGED_EVENT: - break; - case INT3403_THERMAL_EVENT: - thermal_zone_device_update(obj->tzone); - break; - default: - dev_err(&device->dev, "Unsupported event [0x%x]\n", event); - break; - } -} - -static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp) -{ - unsigned long long crt; - acpi_status status; - - status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt); - if (ACPI_FAILURE(status)) - return -EIO; - - *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET); - - return 0; -} - -static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp) -{ - unsigned long long psv; - acpi_status status; - - status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv); - if (ACPI_FAILURE(status)) - return -EIO; - - *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET); - - return 0; -} - -static int acpi_int3403_add(struct acpi_device *device) -{ - int result = 0; - unsigned long long ptyp; - acpi_status status; - struct int3403_sensor *obj; - unsigned long long trip_cnt; - int trip_mask = 0; - - if (!device) - return -EINVAL; - - status = acpi_evaluate_integer(device->handle, "PTYP", NULL, &ptyp); - if (ACPI_FAILURE(status)) - return -EINVAL; - - if (ptyp != INT3403_TYPE_SENSOR) - return -EINVAL; - - obj = devm_kzalloc(&device->dev, sizeof(*obj), GFP_KERNEL); - if (!obj) - return -ENOMEM; - - device->driver_data = obj; - - status = acpi_evaluate_integer(device->handle, "PATC", NULL, - &trip_cnt); - if (ACPI_FAILURE(status)) - trip_cnt = 0; - - if (trip_cnt) { - /* We have to cache, thresholds can't be readback */ - obj->thresholds = devm_kzalloc(&device->dev, - sizeof(*obj->thresholds) * trip_cnt, - GFP_KERNEL); - if (!obj->thresholds) - return -ENOMEM; - trip_mask = BIT(trip_cnt) - 1; - } - - obj->psv_trip_id = -1; - if (!sys_get_trip_psv(device, &obj->psv_temp)) - obj->psv_trip_id = trip_cnt++; - - obj->crit_trip_id = -1; - if (!sys_get_trip_crt(device, &obj->crit_temp)) - obj->crit_trip_id = trip_cnt++; - - obj->tzone = thermal_zone_device_register(acpi_device_bid(device), - trip_cnt, trip_mask, device, &tzone_ops, - NULL, 0, 0); - if (IS_ERR(obj->tzone)) { - result = PTR_ERR(obj->tzone); - return result; - } - - strcpy(acpi_device_name(device), "INT3403"); - strcpy(acpi_device_class(device), ACPI_INT3403_CLASS); - - return 0; -} - -static int acpi_int3403_remove(struct acpi_device *device) -{ - struct int3403_sensor *obj; - - obj = acpi_driver_data(device); - thermal_zone_device_unregister(obj->tzone); - - return 0; -} - -ACPI_MODULE_NAME("int3403"); -static const struct acpi_device_id int3403_device_ids[] = { - {"INT3403", 0}, - {"", 0}, -}; -MODULE_DEVICE_TABLE(acpi, int3403_device_ids); - -static struct acpi_driver acpi_int3403_driver = { - .name = "INT3403", - .class = ACPI_INT3403_CLASS, - .ids = int3403_device_ids, - .ops = { - .add = acpi_int3403_add, - .remove = acpi_int3403_remove, - .notify = acpi_thermal_notify, - }, -}; - -module_acpi_driver(acpi_int3403_driver); - -MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("ACPI INT3403 thermal driver"); diff --git a/drivers/thermal/int340x_thermal/Makefile b/drivers/thermal/int340x_thermal/Makefile new file mode 100644 index 000000000000..ffe40bffaf1a --- /dev/null +++ b/drivers/thermal/int340x_thermal/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_INT340X_THERMAL) += int3400_thermal.o +obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o +obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o +obj-$(CONFIG_ACPI_THERMAL_REL) += acpi_thermal_rel.o diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c new file mode 100644 index 000000000000..0d8db808f0ae --- /dev/null +++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.c @@ -0,0 +1,400 @@ +/* acpi_thermal_rel.c driver for exporting ACPI thermal relationship + * + * Copyright (c) 2014 Intel Corp + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + */ + +/* + * Two functionalities included: + * 1. Export _TRT, _ART, via misc device interface to the userspace. + * 2. Provide parsing result to kernel drivers + * + */ +#include <linux/init.h> +#include <linux/export.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/acpi.h> +#include <linux/uaccess.h> +#include <linux/miscdevice.h> +#include "acpi_thermal_rel.h" + +static acpi_handle acpi_thermal_rel_handle; +static DEFINE_SPINLOCK(acpi_thermal_rel_chrdev_lock); +static int acpi_thermal_rel_chrdev_count; /* #times opened */ +static int acpi_thermal_rel_chrdev_exclu; /* already open exclusive? */ + +static int acpi_thermal_rel_open(struct inode *inode, struct file *file) +{ + spin_lock(&acpi_thermal_rel_chrdev_lock); + if (acpi_thermal_rel_chrdev_exclu || + (acpi_thermal_rel_chrdev_count && (file->f_flags & O_EXCL))) { + spin_unlock(&acpi_thermal_rel_chrdev_lock); + return -EBUSY; + } + + if (file->f_flags & O_EXCL) + acpi_thermal_rel_chrdev_exclu = 1; + acpi_thermal_rel_chrdev_count++; + + spin_unlock(&acpi_thermal_rel_chrdev_lock); + + return nonseekable_open(inode, file); +} + +static int acpi_thermal_rel_release(struct inode *inode, struct file *file) +{ + spin_lock(&acpi_thermal_rel_chrdev_lock); + acpi_thermal_rel_chrdev_count--; + acpi_thermal_rel_chrdev_exclu = 0; + spin_unlock(&acpi_thermal_rel_chrdev_lock); + + return 0; +} + +/** + * acpi_parse_trt - Thermal Relationship Table _TRT for passive cooling + * + * @handle: ACPI handle of the device contains _TRT + * @art_count: the number of valid entries resulted from parsing _TRT + * @artp: pointer to pointer of array of art entries in parsing result + * @create_dev: whether to create platform devices for target and source + * + */ +int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp, + bool create_dev) +{ + acpi_status status; + int result = 0; + int i; + int nr_bad_entries = 0; + struct trt *trts; + struct acpi_device *adev; + union acpi_object *p; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer element = { 0, NULL }; + struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" }; + + if (!acpi_has_method(handle, "_TRT")) + return 0; + + status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + p = buffer.pointer; + if (!p || (p->type != ACPI_TYPE_PACKAGE)) { + pr_err("Invalid _TRT data\n"); + result = -EFAULT; + goto end; + } + + *trt_count = p->package.count; + trts = kzalloc(*trt_count * sizeof(struct trt), GFP_KERNEL); + if (!trts) { + result = -ENOMEM; + goto end; + } + + for (i = 0; i < *trt_count; i++) { + struct trt *trt = &trts[i - nr_bad_entries]; + + element.length = sizeof(struct trt); + element.pointer = trt; + + status = acpi_extract_package(&(p->package.elements[i]), + &trt_format, &element); + if (ACPI_FAILURE(status)) { + nr_bad_entries++; + pr_warn("_TRT package %d is invalid, ignored\n", i); + continue; + } + if (!create_dev) + continue; + + result = acpi_bus_get_device(trt->source, &adev); + if (!result) + acpi_create_platform_device(adev); + else + pr_warn("Failed to get source ACPI device\n"); + + result = acpi_bus_get_device(trt->target, &adev); + if (!result) + acpi_create_platform_device(adev); + else + pr_warn("Failed to get target ACPI device\n"); + } + + *trtp = trts; + /* don't count bad entries */ + *trt_count -= nr_bad_entries; +end: + kfree(buffer.pointer); + return result; +} +EXPORT_SYMBOL(acpi_parse_trt); + +/** + * acpi_parse_art - Parse Active Relationship Table _ART + * + * @handle: ACPI handle of the device contains _ART + * @art_count: the number of valid entries resulted from parsing _ART + * @artp: pointer to pointer of array of art entries in parsing result + * @create_dev: whether to create platform devices for target and source + * + */ +int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp, + bool create_dev) +{ + acpi_status status; + int result = 0; + int i; + int nr_bad_entries = 0; + struct art *arts; + struct acpi_device *adev; + union acpi_object *p; + struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL }; + struct acpi_buffer element = { 0, NULL }; + struct acpi_buffer art_format = { + sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" }; + + if (!acpi_has_method(handle, "_ART")) + return 0; + + status = acpi_evaluate_object(handle, "_ART", NULL, &buffer); + if (ACPI_FAILURE(status)) + return -ENODEV; + + p = buffer.pointer; + if (!p || (p->type != ACPI_TYPE_PACKAGE)) { + pr_err("Invalid _ART data\n"); + result = -EFAULT; + goto end; + } + + /* ignore p->package.elements[0], as this is _ART Revision field */ + *art_count = p->package.count - 1; + arts = kzalloc(*art_count * sizeof(struct art), GFP_KERNEL); + if (!arts) { + result = -ENOMEM; + goto end; + } + + for (i = 0; i < *art_count; i++) { + struct art *art = &arts[i - nr_bad_entries]; + + element.length = sizeof(struct art); + element.pointer = art; + + status = acpi_extract_package(&(p->package.elements[i + 1]), + &art_format, &element); + if (ACPI_FAILURE(status)) { + pr_warn("_ART package %d is invalid, ignored", i); + nr_bad_entries++; + continue; + } + if (!create_dev) + continue; + + if (art->source) { + result = acpi_bus_get_device(art->source, &adev); + if (!result) + acpi_create_platform_device(adev); + else + pr_warn("Failed to get source ACPI device\n"); + } + if (art->target) { + result = acpi_bus_get_device(art->target, &adev); + if (!result) + acpi_create_platform_device(adev); + else + pr_warn("Failed to get source ACPI device\n"); + } + } + + *artp = arts; + /* don't count bad entries */ + *art_count -= nr_bad_entries; +end: + kfree(buffer.pointer); + return result; +} +EXPORT_SYMBOL(acpi_parse_art); + + +/* get device name from acpi handle */ +static void get_single_name(acpi_handle handle, char *name) +{ + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER}; + + if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer))) + pr_warn("Failed get name from handle\n"); + else { + memcpy(name, buffer.pointer, ACPI_NAME_SIZE); + kfree(buffer.pointer); + } +} + +static int fill_art(char __user *ubuf) +{ + int i; + int ret; + int count; + int art_len; + struct art *arts = NULL; + union art_object *art_user; + + ret = acpi_parse_art(acpi_thermal_rel_handle, &count, &arts, false); + if (ret) + goto free_art; + art_len = count * sizeof(union art_object); + art_user = kzalloc(art_len, GFP_KERNEL); + if (!art_user) { + ret = -ENOMEM; + goto free_art; + } + /* now fill in user art data */ + for (i = 0; i < count; i++) { + /* userspace art needs device name instead of acpi reference */ + get_single_name(arts[i].source, art_user[i].source_device); + get_single_name(arts[i].target, art_user[i].target_device); + /* copy the rest int data in addition to source and target */ + memcpy(&art_user[i].weight, &arts[i].weight, + sizeof(u64) * (ACPI_NR_ART_ELEMENTS - 2)); + } + + if (copy_to_user(ubuf, art_user, art_len)) + ret = -EFAULT; + kfree(art_user); +free_art: + kfree(arts); + return ret; +} + +static int fill_trt(char __user *ubuf) +{ + int i; + int ret; + int count; + int trt_len; + struct trt *trts = NULL; + union trt_object *trt_user; + + ret = acpi_parse_trt(acpi_thermal_rel_handle, &count, &trts, false); + if (ret) + goto free_trt; + trt_len = count * sizeof(union trt_object); + trt_user = kzalloc(trt_len, GFP_KERNEL); + if (!trt_user) { + ret = -ENOMEM; + goto free_trt; + } + /* now fill in user trt data */ + for (i = 0; i < count; i++) { + /* userspace trt needs device name instead of acpi reference */ + get_single_name(trts[i].source, trt_user[i].source_device); + get_single_name(trts[i].target, trt_user[i].target_device); + trt_user[i].sample_period = trts[i].sample_period; + trt_user[i].influence = trts[i].influence; + } + + if (copy_to_user(ubuf, trt_user, trt_len)) + ret = -EFAULT; + kfree(trt_user); +free_trt: + kfree(trts); + return ret; +} + +static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd, + unsigned long __arg) +{ + int ret = 0; + unsigned long length = 0; + unsigned long count = 0; + char __user *arg = (void __user *)__arg; + struct trt *trts; + struct art *arts; + + switch (cmd) { + case ACPI_THERMAL_GET_TRT_COUNT: + ret = acpi_parse_trt(acpi_thermal_rel_handle, (int *)&count, + &trts, false); + kfree(trts); + if (!ret) + return put_user(count, (unsigned long __user *)__arg); + return ret; + case ACPI_THERMAL_GET_TRT_LEN: + ret = acpi_parse_trt(acpi_thermal_rel_handle, (int *)&count, + &trts, false); + kfree(trts); + length = count * sizeof(union trt_object); + if (!ret) + return put_user(length, (unsigned long __user *)__arg); + return ret; + case ACPI_THERMAL_GET_TRT: + return fill_trt(arg); + case ACPI_THERMAL_GET_ART_COUNT: + ret = acpi_parse_art(acpi_thermal_rel_handle, (int *)&count, + &arts, false); + kfree(arts); + if (!ret) + return put_user(count, (unsigned long __user *)__arg); + return ret; + case ACPI_THERMAL_GET_ART_LEN: + ret = acpi_parse_art(acpi_thermal_rel_handle, (int *)&count, + &arts, false); + kfree(arts); + length = count * sizeof(union art_object); + if (!ret) + return put_user(length, (unsigned long __user *)__arg); + return ret; + + case ACPI_THERMAL_GET_ART: + return fill_art(arg); + + default: + return -ENOTTY; + } +} + +static const struct file_operations acpi_thermal_rel_fops = { + .owner = THIS_MODULE, + .open = acpi_thermal_rel_open, + .release = acpi_thermal_rel_release, + .unlocked_ioctl = acpi_thermal_rel_ioctl, + .llseek = no_llseek, +}; + +static struct miscdevice acpi_thermal_rel_misc_device = { + .minor = MISC_DYNAMIC_MINOR, + "acpi_thermal_rel", + &acpi_thermal_rel_fops +}; + +int acpi_thermal_rel_misc_device_add(acpi_handle handle) +{ + acpi_thermal_rel_handle = handle; + + return misc_register(&acpi_thermal_rel_misc_device); +} +EXPORT_SYMBOL(acpi_thermal_rel_misc_device_add); + +int acpi_thermal_rel_misc_device_remove(acpi_handle handle) +{ + misc_deregister(&acpi_thermal_rel_misc_device); + + return 0; +} +EXPORT_SYMBOL(acpi_thermal_rel_misc_device_remove); + +MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>"); +MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com"); +MODULE_DESCRIPTION("Intel acpi thermal rel misc dev driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.h b/drivers/thermal/int340x_thermal/acpi_thermal_rel.h new file mode 100644 index 000000000000..f00700bc9d79 --- /dev/null +++ b/drivers/thermal/int340x_thermal/acpi_thermal_rel.h @@ -0,0 +1,84 @@ +#ifndef __ACPI_ACPI_THERMAL_H +#define __ACPI_ACPI_THERMAL_H + +#include <asm/ioctl.h> + +#define ACPI_THERMAL_MAGIC 's' + +#define ACPI_THERMAL_GET_TRT_LEN _IOR(ACPI_THERMAL_MAGIC, 1, unsigned long) +#define ACPI_THERMAL_GET_ART_LEN _IOR(ACPI_THERMAL_MAGIC, 2, unsigned long) +#define ACPI_THERMAL_GET_TRT_COUNT _IOR(ACPI_THERMAL_MAGIC, 3, unsigned long) +#define ACPI_THERMAL_GET_ART_COUNT _IOR(ACPI_THERMAL_MAGIC, 4, unsigned long) + +#define ACPI_THERMAL_GET_TRT _IOR(ACPI_THERMAL_MAGIC, 5, unsigned long) +#define ACPI_THERMAL_GET_ART _IOR(ACPI_THERMAL_MAGIC, 6, unsigned long) + +struct art { + acpi_handle source; + acpi_handle target; + u64 weight; + u64 ac0_max; + u64 ac1_max; + u64 ac2_max; + u64 ac3_max; + u64 ac4_max; + u64 ac5_max; + u64 ac6_max; + u64 ac7_max; + u64 ac8_max; + u64 ac9_max; +} __packed; + +struct trt { + acpi_handle source; + acpi_handle target; + u64 influence; + u64 sample_period; + u64 reverved1; + u64 reverved2; + u64 reverved3; + u64 reverved4; +} __packed; + +#define ACPI_NR_ART_ELEMENTS 13 +/* for usrspace */ +union art_object { + struct { + char source_device[8]; /* ACPI single name */ + char target_device[8]; /* ACPI single name */ + u64 weight; + u64 ac0_max_level; + u64 ac1_max_level; + u64 ac2_max_level; + u64 ac3_max_level; + u64 ac4_max_level; + u64 ac5_max_level; + u64 ac6_max_level; + u64 ac7_max_level; + u64 ac8_max_level; + u64 ac9_max_level; + }; + u64 __data[ACPI_NR_ART_ELEMENTS]; +}; + +union trt_object { + struct { + char source_device[8]; /* ACPI single name */ + char target_device[8]; /* ACPI single name */ + u64 influence; + u64 sample_period; + u64 reserved[4]; + }; + u64 __data[8]; +}; + +#ifdef __KERNEL__ +int acpi_thermal_rel_misc_device_add(acpi_handle handle); +int acpi_thermal_rel_misc_device_remove(acpi_handle handle); +int acpi_parse_art(acpi_handle handle, int *art_count, struct art **arts, + bool create_dev); +int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trts, + bool create_dev); +#endif + +#endif /* __ACPI_ACPI_THERMAL_H */ diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c new file mode 100644 index 000000000000..edc1cce117ba --- /dev/null +++ b/drivers/thermal/int340x_thermal/int3400_thermal.c @@ -0,0 +1,271 @@ +/* + * INT3400 thermal driver + * + * Copyright (C) 2014, Intel Corporation + * Authors: Zhang Rui <rui.zhang@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/acpi.h> +#include <linux/thermal.h> +#include "acpi_thermal_rel.h" + +enum int3400_thermal_uuid { + INT3400_THERMAL_PASSIVE_1, + INT3400_THERMAL_PASSIVE_2, + INT3400_THERMAL_ACTIVE, + INT3400_THERMAL_CRITICAL, + INT3400_THERMAL_COOLING_MODE, + INT3400_THERMAL_MAXIMUM_UUID, +}; + +static u8 *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = { + "42A441D6-AE6A-462b-A84B-4A8CE79027D3", + "9E04115A-AE87-4D1C-9500-0F3E340BFE75", + "3A95C389-E4B8-4629-A526-C52C88626BAE", + "97C68AE7-15FA-499c-B8C9-5DA81D606E0A", + "16CAF1B7-DD38-40ed-B1C1-1B8A1913D531", +}; + +struct int3400_thermal_priv { + struct acpi_device *adev; + struct thermal_zone_device *thermal; + int mode; + int art_count; + struct art *arts; + int trt_count; + struct trt *trts; + u8 uuid_bitmap; + int rel_misc_dev_res; +}; + +static int int3400_thermal_get_uuids(struct int3400_thermal_priv *priv) +{ + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *obja, *objb; + int i, j; + int result = 0; + acpi_status status; + + status = acpi_evaluate_object(priv->adev->handle, "IDSP", NULL, &buf); + if (ACPI_FAILURE(status)) + return -ENODEV; + + obja = (union acpi_object *)buf.pointer; + if (obja->type != ACPI_TYPE_PACKAGE) { + result = -EINVAL; + goto end; + } + + for (i = 0; i < obja->package.count; i++) { + objb = &obja->package.elements[i]; + if (objb->type != ACPI_TYPE_BUFFER) { + result = -EINVAL; + goto end; + } + + /* UUID must be 16 bytes */ + if (objb->buffer.length != 16) { + result = -EINVAL; + goto end; + } + + for (j = 0; j < INT3400_THERMAL_MAXIMUM_UUID; j++) { + u8 uuid[16]; + + acpi_str_to_uuid(int3400_thermal_uuids[j], uuid); + if (!strncmp(uuid, objb->buffer.pointer, 16)) { + priv->uuid_bitmap |= (1 << j); + break; + } + } + } + +end: + kfree(buf.pointer); + return result; +} + +static int int3400_thermal_run_osc(acpi_handle handle, + enum int3400_thermal_uuid uuid, bool enable) +{ + u32 ret, buf[2]; + acpi_status status; + int result = 0; + struct acpi_osc_context context = { + .uuid_str = int3400_thermal_uuids[uuid], + .rev = 1, + .cap.length = 8, + }; + + buf[OSC_QUERY_DWORD] = 0; + buf[OSC_SUPPORT_DWORD] = enable; + + context.cap.pointer = buf; + + status = acpi_run_osc(handle, &context); + if (ACPI_SUCCESS(status)) { + ret = *((u32 *)(context.ret.pointer + 4)); + if (ret != enable) + result = -EPERM; + } else + result = -EPERM; + + kfree(context.ret.pointer); + return result; +} + +static int int3400_thermal_get_temp(struct thermal_zone_device *thermal, + unsigned long *temp) +{ + *temp = 20 * 1000; /* faked temp sensor with 20C */ + return 0; +} + +static int int3400_thermal_get_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode *mode) +{ + struct int3400_thermal_priv *priv = thermal->devdata; + + if (!priv) + return -EINVAL; + + *mode = priv->mode; + + return 0; +} + +static int int3400_thermal_set_mode(struct thermal_zone_device *thermal, + enum thermal_device_mode mode) +{ + struct int3400_thermal_priv *priv = thermal->devdata; + bool enable; + int result = 0; + + if (!priv) + return -EINVAL; + + if (mode == THERMAL_DEVICE_ENABLED) + enable = true; + else if (mode == THERMAL_DEVICE_DISABLED) + enable = false; + else + return -EINVAL; + + if (enable != priv->mode) { + priv->mode = enable; + /* currently, only PASSIVE COOLING is supported */ + result = int3400_thermal_run_osc(priv->adev->handle, + INT3400_THERMAL_PASSIVE_1, enable); + } + return result; +} + +static struct thermal_zone_device_ops int3400_thermal_ops = { + .get_temp = int3400_thermal_get_temp, +}; + +static struct thermal_zone_params int3400_thermal_params = { + .governor_name = "user_space", + .no_hwmon = true, +}; + +static int int3400_thermal_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct int3400_thermal_priv *priv; + int result; + + if (!adev) + return -ENODEV; + + priv = kzalloc(sizeof(struct int3400_thermal_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->adev = adev; + + result = int3400_thermal_get_uuids(priv); + if (result) + goto free_priv; + + result = acpi_parse_art(priv->adev->handle, &priv->art_count, + &priv->arts, true); + if (result) + goto free_priv; + + + result = acpi_parse_trt(priv->adev->handle, &priv->trt_count, + &priv->trts, true); + if (result) + goto free_art; + + platform_set_drvdata(pdev, priv); + + if (priv->uuid_bitmap & 1 << INT3400_THERMAL_PASSIVE_1) { + int3400_thermal_ops.get_mode = int3400_thermal_get_mode; + int3400_thermal_ops.set_mode = int3400_thermal_set_mode; + } + priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0, + priv, &int3400_thermal_ops, + &int3400_thermal_params, 0, 0); + if (IS_ERR(priv->thermal)) { + result = PTR_ERR(priv->thermal); + goto free_trt; + } + + priv->rel_misc_dev_res = acpi_thermal_rel_misc_device_add( + priv->adev->handle); + + return 0; +free_trt: + kfree(priv->trts); +free_art: + kfree(priv->arts); +free_priv: + kfree(priv); + return result; +} + +static int int3400_thermal_remove(struct platform_device *pdev) +{ + struct int3400_thermal_priv *priv = platform_get_drvdata(pdev); + + if (!priv->rel_misc_dev_res) + acpi_thermal_rel_misc_device_remove(priv->adev->handle); + + thermal_zone_device_unregister(priv->thermal); + kfree(priv->trts); + kfree(priv->arts); + kfree(priv); + return 0; +} + +static const struct acpi_device_id int3400_thermal_match[] = { + {"INT3400", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, int3400_thermal_match); + +static struct platform_driver int3400_thermal_driver = { + .probe = int3400_thermal_probe, + .remove = int3400_thermal_remove, + .driver = { + .name = "int3400 thermal", + .owner = THIS_MODULE, + .acpi_match_table = ACPI_PTR(int3400_thermal_match), + }, +}; + +module_platform_driver(int3400_thermal_driver); + +MODULE_DESCRIPTION("INT3400 Thermal driver"); +MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/int340x_thermal/int3402_thermal.c b/drivers/thermal/int340x_thermal/int3402_thermal.c new file mode 100644 index 000000000000..a5d08c14ba24 --- /dev/null +++ b/drivers/thermal/int340x_thermal/int3402_thermal.c @@ -0,0 +1,242 @@ +/* + * INT3402 thermal driver for memory temperature reporting + * + * Copyright (C) 2014, Intel Corporation + * Authors: Aaron Lu <aaron.lu@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/acpi.h> +#include <linux/thermal.h> + +#define ACPI_ACTIVE_COOLING_MAX_NR 10 + +struct active_trip { + unsigned long temp; + int id; + bool valid; +}; + +struct int3402_thermal_data { + unsigned long *aux_trips; + int aux_trip_nr; + unsigned long psv_temp; + int psv_trip_id; + unsigned long crt_temp; + int crt_trip_id; + unsigned long hot_temp; + int hot_trip_id; + struct active_trip act_trips[ACPI_ACTIVE_COOLING_MAX_NR]; + acpi_handle *handle; +}; + +static int int3402_thermal_get_zone_temp(struct thermal_zone_device *zone, + unsigned long *temp) +{ + struct int3402_thermal_data *d = zone->devdata; + unsigned long long tmp; + acpi_status status; + + status = acpi_evaluate_integer(d->handle, "_TMP", NULL, &tmp); + if (ACPI_FAILURE(status)) + return -ENODEV; + + /* _TMP returns the temperature in tenths of degrees Kelvin */ + *temp = DECI_KELVIN_TO_MILLICELSIUS(tmp); + + return 0; +} + +static int int3402_thermal_get_trip_temp(struct thermal_zone_device *zone, + int trip, unsigned long *temp) +{ + struct int3402_thermal_data *d = zone->devdata; + int i; + + if (trip < d->aux_trip_nr) + *temp = d->aux_trips[trip]; + else if (trip == d->crt_trip_id) + *temp = d->crt_temp; + else if (trip == d->psv_trip_id) + *temp = d->psv_temp; + else if (trip == d->hot_trip_id) + *temp = d->hot_temp; + else { + for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) { + if (d->act_trips[i].valid && + d->act_trips[i].id == trip) { + *temp = d->act_trips[i].temp; + break; + } + } + if (i == ACPI_ACTIVE_COOLING_MAX_NR) + return -EINVAL; + } + return 0; +} + +static int int3402_thermal_get_trip_type(struct thermal_zone_device *zone, + int trip, enum thermal_trip_type *type) +{ + struct int3402_thermal_data *d = zone->devdata; + int i; + + if (trip < d->aux_trip_nr) + *type = THERMAL_TRIP_PASSIVE; + else if (trip == d->crt_trip_id) + *type = THERMAL_TRIP_CRITICAL; + else if (trip == d->hot_trip_id) + *type = THERMAL_TRIP_HOT; + else if (trip == d->psv_trip_id) + *type = THERMAL_TRIP_PASSIVE; + else { + for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) { + if (d->act_trips[i].valid && + d->act_trips[i].id == trip) { + *type = THERMAL_TRIP_ACTIVE; + break; + } + } + if (i == ACPI_ACTIVE_COOLING_MAX_NR) + return -EINVAL; + } + return 0; +} + +static int int3402_thermal_set_trip_temp(struct thermal_zone_device *zone, int trip, + unsigned long temp) +{ + struct int3402_thermal_data *d = zone->devdata; + acpi_status status; + char name[10]; + + snprintf(name, sizeof(name), "PAT%d", trip); + status = acpi_execute_simple_method(d->handle, name, + MILLICELSIUS_TO_DECI_KELVIN(temp)); + if (ACPI_FAILURE(status)) + return -EIO; + + d->aux_trips[trip] = temp; + return 0; +} + +static struct thermal_zone_device_ops int3402_thermal_zone_ops = { + .get_temp = int3402_thermal_get_zone_temp, + .get_trip_temp = int3402_thermal_get_trip_temp, + .get_trip_type = int3402_thermal_get_trip_type, + .set_trip_temp = int3402_thermal_set_trip_temp, +}; + +static struct thermal_zone_params int3402_thermal_params = { + .governor_name = "user_space", + .no_hwmon = true, +}; + +static int int3402_thermal_get_temp(acpi_handle handle, char *name, + unsigned long *temp) +{ + unsigned long long r; + acpi_status status; + + status = acpi_evaluate_integer(handle, name, NULL, &r); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLICELSIUS(r); + return 0; +} + +static int int3402_thermal_probe(struct platform_device *pdev) +{ + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + struct int3402_thermal_data *d; + struct thermal_zone_device *zone; + acpi_status status; + unsigned long long trip_cnt; + int trip_mask = 0, i; + + if (!acpi_has_method(adev->handle, "_TMP")) + return -ENODEV; + + d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL); + if (!d) + return -ENOMEM; + + status = acpi_evaluate_integer(adev->handle, "PATC", NULL, &trip_cnt); + if (ACPI_FAILURE(status)) + trip_cnt = 0; + else { + d->aux_trips = devm_kzalloc(&pdev->dev, + sizeof(*d->aux_trips) * trip_cnt, GFP_KERNEL); + if (!d->aux_trips) + return -ENOMEM; + trip_mask = trip_cnt - 1; + d->handle = adev->handle; + d->aux_trip_nr = trip_cnt; + } + + d->crt_trip_id = -1; + if (!int3402_thermal_get_temp(adev->handle, "_CRT", &d->crt_temp)) + d->crt_trip_id = trip_cnt++; + d->hot_trip_id = -1; + if (!int3402_thermal_get_temp(adev->handle, "_HOT", &d->hot_temp)) + d->hot_trip_id = trip_cnt++; + d->psv_trip_id = -1; + if (!int3402_thermal_get_temp(adev->handle, "_PSV", &d->psv_temp)) + d->psv_trip_id = trip_cnt++; + for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) { + char name[5] = { '_', 'A', 'C', '0' + i, '\0' }; + if (int3402_thermal_get_temp(adev->handle, name, + &d->act_trips[i].temp)) + break; + d->act_trips[i].id = trip_cnt++; + d->act_trips[i].valid = true; + } + + zone = thermal_zone_device_register(acpi_device_bid(adev), trip_cnt, + trip_mask, d, + &int3402_thermal_zone_ops, + &int3402_thermal_params, + 0, 0); + if (IS_ERR(zone)) + return PTR_ERR(zone); + platform_set_drvdata(pdev, zone); + + return 0; +} + +static int int3402_thermal_remove(struct platform_device *pdev) +{ + struct thermal_zone_device *zone = platform_get_drvdata(pdev); + + thermal_zone_device_unregister(zone); + return 0; +} + +static const struct acpi_device_id int3402_thermal_match[] = { + {"INT3402", 0}, + {} +}; + +MODULE_DEVICE_TABLE(acpi, int3402_thermal_match); + +static struct platform_driver int3402_thermal_driver = { + .probe = int3402_thermal_probe, + .remove = int3402_thermal_remove, + .driver = { + .name = "int3402 thermal", + .owner = THIS_MODULE, + .acpi_match_table = int3402_thermal_match, + }, +}; + +module_platform_driver(int3402_thermal_driver); + +MODULE_DESCRIPTION("INT3402 Thermal driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/int340x_thermal/int3403_thermal.c new file mode 100644 index 000000000000..6e9fb62eb817 --- /dev/null +++ b/drivers/thermal/int340x_thermal/int3403_thermal.c @@ -0,0 +1,483 @@ +/* + * ACPI INT3403 thermal driver + * Copyright (c) 2013, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/types.h> +#include <linux/acpi.h> +#include <linux/thermal.h> +#include <linux/platform_device.h> + +#define INT3403_TYPE_SENSOR 0x03 +#define INT3403_TYPE_CHARGER 0x0B +#define INT3403_TYPE_BATTERY 0x0C +#define INT3403_PERF_CHANGED_EVENT 0x80 +#define INT3403_THERMAL_EVENT 0x90 + +#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100) +#define KELVIN_OFFSET 2732 +#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off)) + +struct int3403_sensor { + struct thermal_zone_device *tzone; + unsigned long *thresholds; + unsigned long crit_temp; + int crit_trip_id; + unsigned long psv_temp; + int psv_trip_id; + +}; + +struct int3403_performance_state { + u64 performance; + u64 power; + u64 latency; + u64 linear; + u64 control; + u64 raw_performace; + char *raw_unit; + int reserved; +}; + +struct int3403_cdev { + struct thermal_cooling_device *cdev; + unsigned long max_state; +}; + +struct int3403_priv { + struct platform_device *pdev; + struct acpi_device *adev; + unsigned long long type; + void *priv; +}; + +static int sys_get_curr_temp(struct thermal_zone_device *tzone, + unsigned long *temp) +{ + struct int3403_priv *priv = tzone->devdata; + struct acpi_device *device = priv->adev; + unsigned long long tmp; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_hyst(struct thermal_zone_device *tzone, + int trip, unsigned long *temp) +{ + struct int3403_priv *priv = tzone->devdata; + struct acpi_device *device = priv->adev; + unsigned long long hyst; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst); + if (ACPI_FAILURE(status)) + return -EIO; + + /* + * Thermal hysteresis represents a temperature difference. + * Kelvin and Celsius have same degree size. So the + * conversion here between tenths of degree Kelvin unit + * and Milli-Celsius unit is just to multiply 100. + */ + *temp = hyst * 100; + + return 0; +} + +static int sys_get_trip_temp(struct thermal_zone_device *tzone, + int trip, unsigned long *temp) +{ + struct int3403_priv *priv = tzone->devdata; + struct int3403_sensor *obj = priv->priv; + + if (priv->type != INT3403_TYPE_SENSOR || !obj) + return -EINVAL; + + if (trip == obj->crit_trip_id) + *temp = obj->crit_temp; + else if (trip == obj->psv_trip_id) + *temp = obj->psv_temp; + else { + /* + * get_trip_temp is a mandatory callback but + * PATx method doesn't return any value, so return + * cached value, which was last set from user space + */ + *temp = obj->thresholds[trip]; + } + + return 0; +} + +static int sys_get_trip_type(struct thermal_zone_device *thermal, + int trip, enum thermal_trip_type *type) +{ + struct int3403_priv *priv = thermal->devdata; + struct int3403_sensor *obj = priv->priv; + + /* Mandatory callback, may not mean much here */ + if (trip == obj->crit_trip_id) + *type = THERMAL_TRIP_CRITICAL; + else + *type = THERMAL_TRIP_PASSIVE; + + return 0; +} + +int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip, + unsigned long temp) +{ + struct int3403_priv *priv = tzone->devdata; + struct acpi_device *device = priv->adev; + struct int3403_sensor *obj = priv->priv; + acpi_status status; + char name[10]; + int ret = 0; + + snprintf(name, sizeof(name), "PAT%d", trip); + if (acpi_has_method(device->handle, name)) { + status = acpi_execute_simple_method(device->handle, name, + MILLI_CELSIUS_TO_DECI_KELVIN(temp, + KELVIN_OFFSET)); + if (ACPI_FAILURE(status)) + ret = -EIO; + else + obj->thresholds[trip] = temp; + } else { + ret = -EIO; + dev_err(&device->dev, "sys_set_trip_temp: method not found\n"); + } + + return ret; +} + +static struct thermal_zone_device_ops tzone_ops = { + .get_temp = sys_get_curr_temp, + .get_trip_temp = sys_get_trip_temp, + .get_trip_type = sys_get_trip_type, + .set_trip_temp = sys_set_trip_temp, + .get_trip_hyst = sys_get_trip_hyst, +}; + +static struct thermal_zone_params int3403_thermal_params = { + .governor_name = "user_space", + .no_hwmon = true, +}; + +static void int3403_notify(acpi_handle handle, + u32 event, void *data) +{ + struct int3403_priv *priv = data; + struct int3403_sensor *obj; + + if (!priv) + return; + + obj = priv->priv; + if (priv->type != INT3403_TYPE_SENSOR || !obj) + return; + + switch (event) { + case INT3403_PERF_CHANGED_EVENT: + break; + case INT3403_THERMAL_EVENT: + thermal_zone_device_update(obj->tzone); + break; + default: + dev_err(&priv->pdev->dev, "Unsupported event [0x%x]\n", event); + break; + } +} + +static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp) +{ + unsigned long long crt; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET); + + return 0; +} + +static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp) +{ + unsigned long long psv; + acpi_status status; + + status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv); + if (ACPI_FAILURE(status)) + return -EIO; + + *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET); + + return 0; +} + +static int int3403_sensor_add(struct int3403_priv *priv) +{ + int result = 0; + acpi_status status; + struct int3403_sensor *obj; + unsigned long long trip_cnt; + int trip_mask = 0; + + obj = devm_kzalloc(&priv->pdev->dev, sizeof(*obj), GFP_KERNEL); + if (!obj) + return -ENOMEM; + + priv->priv = obj; + + status = acpi_evaluate_integer(priv->adev->handle, "PATC", NULL, + &trip_cnt); + if (ACPI_FAILURE(status)) + trip_cnt = 0; + + if (trip_cnt) { + /* We have to cache, thresholds can't be readback */ + obj->thresholds = devm_kzalloc(&priv->pdev->dev, + sizeof(*obj->thresholds) * trip_cnt, + GFP_KERNEL); + if (!obj->thresholds) { + result = -ENOMEM; + goto err_free_obj; + } + trip_mask = BIT(trip_cnt) - 1; + } + + obj->psv_trip_id = -1; + if (!sys_get_trip_psv(priv->adev, &obj->psv_temp)) + obj->psv_trip_id = trip_cnt++; + + obj->crit_trip_id = -1; + if (!sys_get_trip_crt(priv->adev, &obj->crit_temp)) + obj->crit_trip_id = trip_cnt++; + + obj->tzone = thermal_zone_device_register(acpi_device_bid(priv->adev), + trip_cnt, trip_mask, priv, &tzone_ops, + &int3403_thermal_params, 0, 0); + if (IS_ERR(obj->tzone)) { + result = PTR_ERR(obj->tzone); + obj->tzone = NULL; + goto err_free_obj; + } + + result = acpi_install_notify_handler(priv->adev->handle, + ACPI_DEVICE_NOTIFY, int3403_notify, + (void *)priv); + if (result) + goto err_free_obj; + + return 0; + + err_free_obj: + if (obj->tzone) + thermal_zone_device_unregister(obj->tzone); + return result; +} + +static int int3403_sensor_remove(struct int3403_priv *priv) +{ + struct int3403_sensor *obj = priv->priv; + + thermal_zone_device_unregister(obj->tzone); + return 0; +} + +/* INT3403 Cooling devices */ +static int int3403_get_max_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct int3403_priv *priv = cdev->devdata; + struct int3403_cdev *obj = priv->priv; + + *state = obj->max_state; + return 0; +} + +static int int3403_get_cur_state(struct thermal_cooling_device *cdev, + unsigned long *state) +{ + struct int3403_priv *priv = cdev->devdata; + unsigned long long level; + acpi_status status; + + status = acpi_evaluate_integer(priv->adev->handle, "PPPC", NULL, &level); + if (ACPI_SUCCESS(status)) { + *state = level; + return 0; + } else + return -EINVAL; +} + +static int +int3403_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state) +{ + struct int3403_priv *priv = cdev->devdata; + acpi_status status; + + status = acpi_execute_simple_method(priv->adev->handle, "SPPC", state); + if (ACPI_SUCCESS(status)) + return 0; + else + return -EINVAL; +} + +static const struct thermal_cooling_device_ops int3403_cooling_ops = { + .get_max_state = int3403_get_max_state, + .get_cur_state = int3403_get_cur_state, + .set_cur_state = int3403_set_cur_state, +}; + +static int int3403_cdev_add(struct int3403_priv *priv) +{ + int result = 0; + acpi_status status; + struct int3403_cdev *obj; + struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL }; + union acpi_object *p; + + obj = devm_kzalloc(&priv->pdev->dev, sizeof(*obj), GFP_KERNEL); + if (!obj) + return -ENOMEM; + + status = acpi_evaluate_object(priv->adev->handle, "PPSS", NULL, &buf); + if (ACPI_FAILURE(status)) + return -ENODEV; + + p = buf.pointer; + if (!p || (p->type != ACPI_TYPE_PACKAGE)) { + printk(KERN_WARNING "Invalid PPSS data\n"); + return -EFAULT; + } + + obj->max_state = p->package.count - 1; + obj->cdev = + thermal_cooling_device_register(acpi_device_bid(priv->adev), + priv, &int3403_cooling_ops); + if (IS_ERR(obj->cdev)) + result = PTR_ERR(obj->cdev); + + priv->priv = obj; + + /* TODO: add ACPI notification support */ + + return result; +} + +static int int3403_cdev_remove(struct int3403_priv *priv) +{ + struct int3403_cdev *obj = priv->priv; + + thermal_cooling_device_unregister(obj->cdev); + return 0; +} + +static int int3403_add(struct platform_device *pdev) +{ + struct int3403_priv *priv; + int result = 0; + acpi_status status; + + priv = devm_kzalloc(&pdev->dev, sizeof(struct int3403_priv), + GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->pdev = pdev; + priv->adev = ACPI_COMPANION(&(pdev->dev)); + if (!priv->adev) { + result = -EINVAL; + goto err; + } + + status = acpi_evaluate_integer(priv->adev->handle, "PTYP", + NULL, &priv->type); + if (ACPI_FAILURE(status)) { + result = -EINVAL; + goto err; + } + + platform_set_drvdata(pdev, priv); + switch (priv->type) { + case INT3403_TYPE_SENSOR: + result = int3403_sensor_add(priv); + break; + case INT3403_TYPE_CHARGER: + case INT3403_TYPE_BATTERY: + result = int3403_cdev_add(priv); + break; + default: + result = -EINVAL; + } + + if (result) + goto err; + return result; + +err: + return result; +} + +static int int3403_remove(struct platform_device *pdev) +{ + struct int3403_priv *priv = platform_get_drvdata(pdev); + + switch (priv->type) { + case INT3403_TYPE_SENSOR: + int3403_sensor_remove(priv); + break; + case INT3403_TYPE_CHARGER: + case INT3403_TYPE_BATTERY: + int3403_cdev_remove(priv); + break; + default: + break; + } + + return 0; +} + +static const struct acpi_device_id int3403_device_ids[] = { + {"INT3403", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, int3403_device_ids); + +static struct platform_driver int3403_driver = { + .probe = int3403_add, + .remove = int3403_remove, + .driver = { + .name = "int3403 thermal", + .owner = THIS_MODULE, + .acpi_match_table = int3403_device_ids, + }, +}; + +module_platform_driver(int3403_driver); + +MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("ACPI INT3403 thermal driver"); diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index 4b2b999b7611..62143ba31001 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -387,20 +387,27 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, int (*get_trend)(void *, long *)) { struct device_node *np, *child, *sensor_np; + struct thermal_zone_device *tzd = ERR_PTR(-ENODEV); np = of_find_node_by_name(NULL, "thermal-zones"); if (!np) return ERR_PTR(-ENODEV); - if (!dev || !dev->of_node) + if (!dev || !dev->of_node) { + of_node_put(np); return ERR_PTR(-EINVAL); + } - sensor_np = dev->of_node; + sensor_np = of_node_get(dev->of_node); for_each_child_of_node(np, child) { struct of_phandle_args sensor_specs; int ret, id; + /* Check whether child is enabled or not */ + if (!of_device_is_available(child)) + continue; + /* For now, thermal framework supports only 1 sensor per zone */ ret = of_parse_phandle_with_args(child, "thermal-sensors", "#thermal-sensor-cells", @@ -418,16 +425,21 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, } if (sensor_specs.np == sensor_np && id == sensor_id) { - of_node_put(np); - return thermal_zone_of_add_sensor(child, sensor_np, - data, - get_temp, - get_trend); + tzd = thermal_zone_of_add_sensor(child, sensor_np, + data, + get_temp, + get_trend); + of_node_put(sensor_specs.np); + of_node_put(child); + goto exit; } + of_node_put(sensor_specs.np); } +exit: + of_node_put(sensor_np); of_node_put(np); - return ERR_PTR(-ENODEV); + return tzd; } EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register); @@ -619,6 +631,7 @@ static int thermal_of_populate_trip(struct device_node *np, /* Required for cooling map matching */ trip->np = np; + of_node_get(np); return 0; } @@ -726,9 +739,14 @@ finish: return tz; free_tbps: + for (i = 0; i < tz->num_tbps; i++) + of_node_put(tz->tbps[i].cooling_device); kfree(tz->tbps); free_trips: + for (i = 0; i < tz->ntrips; i++) + of_node_put(tz->trips[i].np); kfree(tz->trips); + of_node_put(gchild); free_tz: kfree(tz); of_node_put(child); @@ -738,7 +756,13 @@ free_tz: static inline void of_thermal_free_zone(struct __thermal_zone *tz) { + int i; + + for (i = 0; i < tz->num_tbps; i++) + of_node_put(tz->tbps[i].cooling_device); kfree(tz->tbps); + for (i = 0; i < tz->ntrips; i++) + of_node_put(tz->trips[i].np); kfree(tz->trips); kfree(tz); } @@ -771,6 +795,10 @@ int __init of_parse_thermal_zones(void) struct thermal_zone_device *zone; struct thermal_zone_params *tzp; + /* Check whether child is enabled or not */ + if (!of_device_is_available(child)) + continue; + tz = thermal_of_build_thermal_zone(child); if (IS_ERR(tz)) { pr_err("failed to build thermal zone %s: %ld\n", @@ -806,10 +834,13 @@ int __init of_parse_thermal_zones(void) /* attempting to build remaining zones still */ } } + of_node_put(np); return 0; exit_free: + of_node_put(child); + of_node_put(np); of_thermal_free_zone(tz); /* no memory available, so free what we have built */ @@ -838,6 +869,10 @@ void of_thermal_destroy_zones(void) for_each_child_of_node(np, child) { struct thermal_zone_device *zone; + /* Check whether child is enabled or not */ + if (!of_device_is_available(child)) + continue; + zone = thermal_zone_get_zone_by_name(child->name); if (IS_ERR(zone)) continue; @@ -847,4 +882,5 @@ void of_thermal_destroy_zones(void) kfree(zone->ops); of_thermal_free_zone(zone->devdata); } + of_node_put(np); } diff --git a/drivers/thermal/samsung/exynos_thermal_common.c b/drivers/thermal/samsung/exynos_thermal_common.c index 3f5ad25ddca8..b6be572704a4 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.c +++ b/drivers/thermal/samsung/exynos_thermal_common.c @@ -417,13 +417,10 @@ void exynos_unregister_thermal(struct thermal_sensor_conf *sensor_conf) th_zone = sensor_conf->pzone_data; - if (th_zone->therm_dev) - thermal_zone_device_unregister(th_zone->therm_dev); + thermal_zone_device_unregister(th_zone->therm_dev); - for (i = 0; i < th_zone->cool_dev_size; i++) { - if (th_zone->cool_dev[i]) - cpufreq_cooling_unregister(th_zone->cool_dev[i]); - } + for (i = 0; i < th_zone->cool_dev_size; ++i) + cpufreq_cooling_unregister(th_zone->cool_dev[i]); dev_info(sensor_conf->dev, "Exynos: Kernel Thermal management unregistered\n"); diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 3eb2ed9ea3a4..158f5aa8dc5d 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -27,7 +27,7 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 -#define MAX_THRESHOLD_LEVS 5 +#define MAX_TRIMINFO_CTRL_REG 2 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index acbff14da3a4..49c09243fd38 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -77,16 +77,6 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) struct exynos_tmu_platform_data *pdata = data->pdata; int temp_code; - if (pdata->cal_mode == HW_MODE) - return temp; - - if (data->soc == SOC_ARCH_EXYNOS4210) - /* temp should range between 25 and 125 */ - if (temp < 25 || temp > 125) { - temp_code = -EINVAL; - goto out; - } - switch (pdata->cal_type) { case TYPE_TWO_POINT_TRIMMING: temp_code = (temp - pdata->first_point_trim) * @@ -101,7 +91,7 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) temp_code = temp + pdata->default_temp_offset; break; } -out: + return temp_code; } @@ -114,16 +104,6 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) struct exynos_tmu_platform_data *pdata = data->pdata; int temp; - if (pdata->cal_mode == HW_MODE) - return temp_code; - - if (data->soc == SOC_ARCH_EXYNOS4210) - /* temp_code should range between 75 and 175 */ - if (temp_code < 75 || temp_code > 175) { - temp = -ENODATA; - goto out; - } - switch (pdata->cal_type) { case TYPE_TWO_POINT_TRIMMING: temp = (temp_code - data->temp_error1) * @@ -138,18 +118,35 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) temp = temp_code - pdata->default_temp_offset; break; } -out: + return temp; } +static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data) +{ + const struct exynos_tmu_registers *reg = data->pdata->registers; + unsigned int val_irq; + + val_irq = readl(data->base + reg->tmu_intstat); + /* + * Clear the interrupts. Please note that the documentation for + * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly + * states that INTCLEAR register has a different placing of bits + * responsible for FALL IRQs than INTSTAT register. Exynos5420 + * and Exynos5440 documentation is correct (Exynos4210 doesn't + * support FALL IRQs at all). + */ + writel(val_irq, data->base + reg->tmu_intclear); +} + static int exynos_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int status, trim_info = 0, con; + unsigned int status, trim_info = 0, con, ctrl; unsigned int rising_threshold = 0, falling_threshold = 0; - int ret = 0, threshold_code, i, trigger_levs = 0; + int ret = 0, threshold_code, i; mutex_lock(&data->lock); clk_enable(data->clk); @@ -164,11 +161,17 @@ static int exynos_tmu_initialize(struct platform_device *pdev) } } - if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) - __raw_writel(1, data->base + reg->triminfo_ctrl); - - if (pdata->cal_mode == HW_MODE) - goto skip_calib_data; + if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) { + for (i = 0; i < reg->triminfo_ctrl_count; i++) { + if (pdata->triminfo_reload[i]) { + ctrl = readl(data->base + + reg->triminfo_ctrl[i]); + ctrl |= pdata->triminfo_reload[i]; + writel(ctrl, data->base + + reg->triminfo_ctrl[i]); + } + } + } /* Save trimming info in order to perform calibration */ if (data->soc == SOC_ARCH_EXYNOS5440) { @@ -197,7 +200,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev) trim_info = readl(data->base + reg->triminfo_data); } data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; - data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & + data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK); if (!data->temp_error1 || @@ -207,67 +210,33 @@ static int exynos_tmu_initialize(struct platform_device *pdev) if (!data->temp_error2) data->temp_error2 = - (pdata->efuse_value >> reg->triminfo_85_shift) & + (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK; -skip_calib_data: - if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) { - dev_err(&pdev->dev, "Invalid max trigger level\n"); - ret = -EINVAL; - goto out; - } - - for (i = 0; i < pdata->max_trigger_level; i++) { - if (!pdata->trigger_levels[i]) - continue; - - if ((pdata->trigger_type[i] == HW_TRIP) && - (!pdata->trigger_levels[pdata->max_trigger_level - 1])) { - dev_err(&pdev->dev, "Invalid hw trigger level\n"); - ret = -EINVAL; - goto out; - } - - /* Count trigger levels except the HW trip*/ - if (!(pdata->trigger_type[i] == HW_TRIP)) - trigger_levs++; - } - rising_threshold = readl(data->base + reg->threshold_th0); if (data->soc == SOC_ARCH_EXYNOS4210) { /* Write temperature code for threshold */ threshold_code = temp_to_code(data, pdata->threshold); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } writeb(threshold_code, data->base + reg->threshold_temp); - for (i = 0; i < trigger_levs; i++) + for (i = 0; i < pdata->non_hw_trigger_levels; i++) writeb(pdata->trigger_levels[i], data->base + reg->threshold_th0 + i * sizeof(reg->threshold_th0)); - writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); } else { /* Write temperature code for rising and falling threshold */ - for (i = 0; - i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) { + for (i = 0; i < pdata->non_hw_trigger_levels; i++) { threshold_code = temp_to_code(data, pdata->trigger_levels[i]); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } rising_threshold &= ~(0xff << 8 * i); rising_threshold |= threshold_code << 8 * i; if (pdata->threshold_falling) { threshold_code = temp_to_code(data, pdata->trigger_levels[i] - pdata->threshold_falling); - if (threshold_code > 0) - falling_threshold |= - threshold_code << 8 * i; + falling_threshold |= threshold_code << 8 * i; } } @@ -276,9 +245,7 @@ skip_calib_data: writel(falling_threshold, data->base + reg->threshold_th1); - writel((reg->intclr_rise_mask << reg->intclr_rise_shift) | - (reg->intclr_fall_mask << reg->intclr_fall_shift), - data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); /* if last threshold limit is also present */ i = pdata->max_trigger_level - 1; @@ -286,10 +253,6 @@ skip_calib_data: (pdata->trigger_type[i] == HW_TRIP)) { threshold_code = temp_to_code(data, pdata->trigger_levels[i]); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { /* 1-4 level to be assigned in th0 reg */ rising_threshold &= ~(0xff << 8 * i); @@ -325,7 +288,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int con, interrupt_en, cal_val; + unsigned int con, interrupt_en; mutex_lock(&data->lock); clk_enable(data->clk); @@ -335,15 +298,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) if (pdata->test_mux) con |= (pdata->test_mux << reg->test_mux_addr_shift); - if (pdata->reference_voltage) { - con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift); - con |= pdata->reference_voltage << reg->buf_vref_sel_shift; - } + con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); + con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; - if (pdata->gain) { - con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift); - con |= (pdata->gain << reg->buf_slope_sel_shift); - } + con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); + con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); if (pdata->noise_cancel_mode) { con &= ~(reg->therm_trip_mode_mask << @@ -351,29 +310,8 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift); } - if (pdata->cal_mode == HW_MODE) { - con &= ~(reg->calib_mode_mask << reg->calib_mode_shift); - cal_val = 0; - switch (pdata->cal_type) { - case TYPE_TWO_POINT_TRIMMING: - cal_val = 3; - break; - case TYPE_ONE_POINT_TRIMMING_85: - cal_val = 2; - break; - case TYPE_ONE_POINT_TRIMMING_25: - cal_val = 1; - break; - case TYPE_NONE: - break; - default: - dev_err(&pdev->dev, "Invalid calibration type, using none\n"); - } - con |= cal_val << reg->calib_mode_shift; - } - if (on) { - con |= (1 << reg->core_en_shift); + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = pdata->trigger_enable[3] << reg->inten_rise3_shift | pdata->trigger_enable[2] << reg->inten_rise2_shift | @@ -383,7 +321,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) interrupt_en |= interrupt_en << reg->inten_fall0_shift; } else { - con &= ~(1 << reg->core_en_shift); + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = 0; /* Disable all interrupts */ } writel(interrupt_en, data->base + reg->tmu_inten); @@ -404,8 +342,16 @@ static int exynos_tmu_read(struct exynos_tmu_data *data) clk_enable(data->clk); temp_code = readb(data->base + reg->tmu_cur_temp); - temp = code_to_temp(data, temp_code); + if (data->soc == SOC_ARCH_EXYNOS4210) + /* temp_code should range between 75 and 175 */ + if (temp_code < 75 || temp_code > 175) { + temp = -ENODATA; + goto out; + } + + temp = code_to_temp(data, temp_code); +out: clk_disable(data->clk); mutex_unlock(&data->lock); @@ -465,7 +411,7 @@ static void exynos_tmu_work(struct work_struct *work) struct exynos_tmu_data, irq_work); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int val_irq, val_type; + unsigned int val_type; if (!IS_ERR(data->clk_sec)) clk_enable(data->clk_sec); @@ -483,9 +429,7 @@ static void exynos_tmu_work(struct work_struct *work) clk_enable(data->clk); /* TODO: take action based on particular interrupt */ - val_irq = readl(data->base + reg->tmu_intstat); - /* clear the interrupts */ - writel(val_irq, data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); clk_disable(data->clk); mutex_unlock(&data->lock); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 1b4a6444ea61..c58c7663a3fe 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -34,11 +34,6 @@ enum calibration_type { TYPE_NONE, }; -enum calibration_mode { - SW_MODE, - HW_MODE, -}; - enum soc_type { SOC_ARCH_EXYNOS3250 = 1, SOC_ARCH_EXYNOS4210, @@ -82,46 +77,19 @@ enum soc_type { * bitfields. The register validity, offsets and bitfield values may vary * slightly across different exynos SOC's. * @triminfo_data: register containing 2 pont trimming data - * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg. - * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg. * @triminfo_ctrl: trim info controller register. - * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl - reg. + * @triminfo_ctrl_count: the number of trim info controller register. * @tmu_ctrl: TMU main controller register. * @test_mux_addr_shift: shift bits of test mux address. - * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register. - * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register. * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register. - * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl - register. - * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register. - * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl - register. - * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl - register. - * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in - tmu_ctrl register. - * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register. * @tmu_status: register drescribing the TMU status. * @tmu_cur_temp: register containing the current temperature of the TMU. - * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp - register. * @threshold_temp: register containing the base threshold level. * @threshold_th0: Register containing first set of rising levels. - * @threshold_th0_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th0_l1_shift: shift bits of level1 threshold temperature. - * @threshold_th0_l2_shift: shift bits of level2 threshold temperature. - * @threshold_th0_l3_shift: shift bits of level3 threshold temperature. * @threshold_th1: Register containing second set of rising levels. - * @threshold_th1_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th1_l1_shift: shift bits of level1 threshold temperature. - * @threshold_th1_l2_shift: shift bits of level2 threshold temperature. - * @threshold_th1_l3_shift: shift bits of level3 threshold temperature. * @threshold_th2: Register containing third set of rising levels. - * @threshold_th2_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th3: Register containing fourth set of rising levels. * @threshold_th3_l0_shift: shift bits of level0 threshold temperature. * @tmu_inten: register containing the different threshold interrupt enable bits. @@ -130,68 +98,35 @@ enum soc_type { * @inten_rise2_shift: shift bits of rising 2 interrupt bits. * @inten_rise3_shift: shift bits of rising 3 interrupt bits. * @inten_fall0_shift: shift bits of falling 0 interrupt bits. - * @inten_fall1_shift: shift bits of falling 1 interrupt bits. - * @inten_fall2_shift: shift bits of falling 2 interrupt bits. - * @inten_fall3_shift: shift bits of falling 3 interrupt bits. * @tmu_intstat: Register containing the interrupt status values. * @tmu_intclear: Register for clearing the raised interrupt status. - * @intclr_fall_shift: shift bits for interrupt clear fall 0 - * @intclr_rise_shift: shift bits of all rising interrupt bits. - * @intclr_rise_mask: mask bits of all rising interrupt bits. - * @intclr_fall_mask: mask bits of all rising interrupt bits. * @emul_con: TMU emulation controller register. * @emul_temp_shift: shift bits of emulation temperature. * @emul_time_shift: shift bits of emulation time. - * @emul_time_mask: mask bits of emulation time. * @tmu_irqstatus: register to find which TMU generated interrupts. * @tmu_pmin: register to get/set the Pmin value. */ struct exynos_tmu_registers { u32 triminfo_data; - u32 triminfo_25_shift; - u32 triminfo_85_shift; - u32 triminfo_ctrl; - u32 triminfo_ctrl1; - u32 triminfo_reload_shift; + u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG]; + u32 triminfo_ctrl_count; u32 tmu_ctrl; u32 test_mux_addr_shift; - u32 buf_vref_sel_shift; - u32 buf_vref_sel_mask; u32 therm_trip_mode_shift; u32 therm_trip_mode_mask; u32 therm_trip_en_shift; - u32 buf_slope_sel_shift; - u32 buf_slope_sel_mask; - u32 calib_mode_shift; - u32 calib_mode_mask; - u32 therm_trip_tq_en_shift; - u32 core_en_shift; u32 tmu_status; u32 tmu_cur_temp; - u32 tmu_cur_temp_shift; u32 threshold_temp; u32 threshold_th0; - u32 threshold_th0_l0_shift; - u32 threshold_th0_l1_shift; - u32 threshold_th0_l2_shift; - u32 threshold_th0_l3_shift; - u32 threshold_th1; - u32 threshold_th1_l0_shift; - u32 threshold_th1_l1_shift; - u32 threshold_th1_l2_shift; - u32 threshold_th1_l3_shift; - u32 threshold_th2; - u32 threshold_th2_l0_shift; - - u32 threshold_th3; u32 threshold_th3_l0_shift; u32 tmu_inten; @@ -200,22 +135,14 @@ struct exynos_tmu_registers { u32 inten_rise2_shift; u32 inten_rise3_shift; u32 inten_fall0_shift; - u32 inten_fall1_shift; - u32 inten_fall2_shift; - u32 inten_fall3_shift; u32 tmu_intstat; u32 tmu_intclear; - u32 intclr_fall_shift; - u32 intclr_rise_shift; - u32 intclr_fall_mask; - u32 intclr_rise_mask; u32 emul_con; u32 emul_temp_shift; u32 emul_time_shift; - u32 emul_time_mask; u32 tmu_irqstatus; u32 tmu_pmin; @@ -250,11 +177,12 @@ struct exynos_tmu_registers { * 1 = enable trigger_level[] interrupt, * 0 = disable trigger_level[] interrupt * @max_trigger_level: max trigger level supported by the TMU + * @non_hw_trigger_levels: number of defined non-hardware trigger levels * @gain: gain of amplifier in the positive-TC generator block - * 0 <= gain <= 15 + * 0 < gain <= 15 * @reference_voltage: reference voltage of amplifier * in the positive-TC generator block - * 0 <= reference_voltage <= 31 + * 0 < reference_voltage <= 31 * @noise_cancel_mode: noise cancellation mode * 000, 100, 101, 110 and 111 can be different modes * @type: determines the type of SOC @@ -265,8 +193,8 @@ struct exynos_tmu_registers { * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming * @test_mux; information if SoC supports test MUX + * @triminfo_reload: reload value to read TRIMINFO register * @cal_type: calibration type for temperature - * @cal_mode: calibration mode for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may * applicable to only some of the trigger levels. @@ -284,6 +212,7 @@ struct exynos_tmu_platform_data { enum trigger_type trigger_type[MAX_TRIP_COUNT]; bool trigger_enable[MAX_TRIP_COUNT]; u8 max_trigger_level; + u8 non_hw_trigger_levels; u8 gain; u8 reference_voltage; u8 noise_cancel_mode; @@ -295,9 +224,9 @@ struct exynos_tmu_platform_data { u8 second_point_trim; u8 default_temp_offset; u8 test_mux; + u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG]; enum calibration_type cal_type; - enum calibration_mode cal_mode; enum soc_type type; struct freq_clip_table freq_tab[4]; unsigned int freq_tab_count; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index aa8e0dee2055..1724f6cdaef8 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -27,14 +27,7 @@ #if defined(CONFIG_CPU_EXYNOS4210) static const struct exynos_tmu_registers exynos4210_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP, @@ -46,7 +39,6 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = { .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK, }; struct exynos_tmu_init_data const exynos4210_default_tmu_data = { @@ -64,6 +56,7 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { .trigger_type[1] = THROTTLE_ACTIVE, .trigger_type[2] = SW_TRIP, .max_trigger_level = 4, + .non_hw_trigger_levels = 3, .gain = 15, .reference_voltage = 7, .cal_type = TYPE_ONE_POINT_TRIMMING, @@ -93,18 +86,14 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS3250) static const struct exynos_tmu_registers exynos3250_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1, + .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2, + .triminfo_ctrl_count = 2, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -116,14 +105,9 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define EXYNOS3250_TMU_DATA \ @@ -141,6 +125,7 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -160,8 +145,10 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ + .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos3250_tmu_registers, \ - .features = (TMU_SUPPORT_EMULATION | \ + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ TMU_SUPPORT_EMUL_TIME) #endif @@ -182,20 +169,13 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static const struct exynos_tmu_registers exynos4412_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, - .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON, - .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT, + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2, + .triminfo_ctrl_count = 1, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -208,14 +188,9 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define EXYNOS4412_TMU_DATA \ @@ -233,6 +208,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -252,6 +228,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos4412_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ @@ -286,18 +263,10 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5260) static const struct exynos_tmu_registers exynos5260_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .tmu_ctrl = EXYNOS_TMU_REG_CONTROL1, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -310,14 +279,9 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK, .emul_con = EXYNOS5260_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define __EXYNOS5260_TMU_DATA \ @@ -335,6 +299,7 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -359,9 +324,8 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { #define EXYNOS5260_TMU_DATA \ __EXYNOS5260_TMU_DATA \ .type = SOC_ARCH_EXYNOS5260, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME) struct exynos_tmu_init_data const exynos5260_default_tmu_data = { .tmu_data = { @@ -378,17 +342,10 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5420) static const struct exynos_tmu_registers exynos5420_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -402,14 +359,9 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define __EXYNOS5420_TMU_DATA \ @@ -427,6 +379,7 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -451,16 +404,15 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { #define EXYNOS5420_TMU_DATA \ __EXYNOS5420_TMU_DATA \ .type = SOC_ARCH_EXYNOS5250, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME) #define EXYNOS5420_TMU_DATA_SHARED \ __EXYNOS5420_TMU_DATA \ .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \ + TMU_SUPPORT_ADDRESS_MULTIPLE) struct exynos_tmu_init_data const exynos5420_default_tmu_data = { .tmu_data = { @@ -477,19 +429,10 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5440) static const struct exynos_tmu_registers exynos5440_tmu_registers = { .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT, - .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, @@ -504,10 +447,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, - .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK, .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, @@ -521,11 +460,11 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .trigger_type[0] = SW_TRIP, \ .trigger_type[4] = HW_TRIP, \ .max_trigger_level = 5, \ + .non_hw_trigger_levels = 1, \ .gain = 5, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ .cal_type = TYPE_ONE_POINT_TRIMMING, \ - .cal_mode = 0, \ .efuse_value = 0x5b2d, \ .min_efuse_value = 16, \ .max_efuse_value = 76, \ diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index f0979e598491..63de598c9c2c 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -39,55 +39,31 @@ #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 #define EXYNOS_TMU_CORE_EN_SHIFT 0 +/* Exynos3250 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON1 0x10 + /* Exynos4210 specific registers */ #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C -#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60 -#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64 -#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68 -#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C - -#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1 -#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10 -#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100 -#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000 -#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111 -#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111 - -/* Exynos5250 and Exynos4412 specific registers */ -#define EXYNOS_TMU_TRIMINFO_CON 0x14 + +/* Exynos5250, Exynos4412, Exynos3250 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON2 0x14 #define EXYNOS_THD_TEMP_RISE 0x50 #define EXYNOS_THD_TEMP_FALL 0x54 #define EXYNOS_EMUL_CON 0x80 -#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1 +#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 #define EXYNOS_TRIMINFO_25_SHIFT 0 #define EXYNOS_TRIMINFO_85_SHIFT 8 -#define EXYNOS_TMU_RISE_INT_MASK 0x111 -#define EXYNOS_TMU_RISE_INT_SHIFT 0 -#define EXYNOS_TMU_FALL_INT_MASK 0x111 -#define EXYNOS_TMU_CLEAR_RISE_INT 0x111 -#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) -#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 -#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16 -#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 -#define EXYNOS_TMU_CALIB_MODE_SHIFT 4 -#define EXYNOS_TMU_CALIB_MODE_MASK 0x3 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 #define EXYNOS_TMU_INTEN_RISE2_SHIFT 8 #define EXYNOS_TMU_INTEN_RISE3_SHIFT 12 #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 -#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20 -#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24 -#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28 #define EXYNOS_EMUL_TIME 0x57F0 #define EXYNOS_EMUL_TIME_MASK 0xffff @@ -99,14 +75,9 @@ #define EXYNOS_MAX_TRIGGER_PER_REG 4 /* Exynos5260 specific */ -#define EXYNOS_TMU_REG_CONTROL1 0x24 #define EXYNOS5260_TMU_REG_INTEN 0xC0 #define EXYNOS5260_TMU_REG_INTSTAT 0xC4 #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 -#define EXYNOS5260_TMU_CLEAR_RISE_INT 0x1111 -#define EXYNOS5260_TMU_CLEAR_FALL_INT (0x1111 << 16) -#define EXYNOS5260_TMU_RISE_INT_MASK 0x1111 -#define EXYNOS5260_TMU_FALL_INT_MASK 0x1111 #define EXYNOS5260_EMUL_CON 0x100 /* Exynos4412 specific */ @@ -122,29 +93,17 @@ #define EXYNOS5440_TMU_S0_7_TH0 0x110 #define EXYNOS5440_TMU_S0_7_TH1 0x130 #define EXYNOS5440_TMU_S0_7_TH2 0x150 -#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0 #define EXYNOS5440_TMU_S0_7_IRQEN 0x210 #define EXYNOS5440_TMU_S0_7_IRQ 0x230 /* exynos5440 common registers */ #define EXYNOS5440_TMU_IRQ_STATUS 0x000 #define EXYNOS5440_TMU_PMIN 0x004 -#define EXYNOS5440_TMU_TEMP 0x008 -#define EXYNOS5440_TMU_RISE_INT_MASK 0xf -#define EXYNOS5440_TMU_RISE_INT_SHIFT 0 -#define EXYNOS5440_TMU_FALL_INT_MASK 0xf #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 -#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5 -#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6 -#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7 -#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0 -#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8 -#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16 -#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24 #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 #define EXYNOS5440_EFUSE_SWAP_OFFSET 8 diff --git a/drivers/thermal/st/st_thermal.c b/drivers/thermal/st/st_thermal.c index 90163b384660..d1ec5804c0bb 100644 --- a/drivers/thermal/st/st_thermal.c +++ b/drivers/thermal/st/st_thermal.c @@ -275,6 +275,7 @@ int st_thermal_unregister(struct platform_device *pdev) } EXPORT_SYMBOL_GPL(st_thermal_unregister); +#ifdef CONFIG_PM_SLEEP static int st_thermal_suspend(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); @@ -305,6 +306,8 @@ static int st_thermal_resume(struct device *dev) return 0; } +#endif + SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume); EXPORT_SYMBOL_GPL(st_thermal_pm_ops); diff --git a/drivers/thermal/step_wise.c b/drivers/thermal/step_wise.c index f251521baaa2..fdd1f523a1ed 100644 --- a/drivers/thermal/step_wise.c +++ b/drivers/thermal/step_wise.c @@ -23,6 +23,7 @@ */ #include <linux/thermal.h> +#include <trace/events/thermal.h> #include "thermal_core.h" @@ -76,7 +77,7 @@ static unsigned long get_target_state(struct thermal_instance *instance, next_target = instance->upper; break; case THERMAL_TREND_DROPPING: - if (cur_state == instance->lower) { + if (cur_state <= instance->lower) { if (!throttle) next_target = THERMAL_NO_TARGET; } else { @@ -129,8 +130,10 @@ static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip) trend = get_tz_trend(tz, trip); - if (tz->temperature >= trip_temp) + if (tz->temperature >= trip_temp) { throttle = true; + trace_thermal_zone_trip(tz, trip, trip_type); + } dev_dbg(&tz->device, "Trip%d[type=%d,temp=%ld]:trend=%d,throttle=%d\n", trip, trip_type, trip_temp, trend, throttle); diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 1e23f4f8d2c2..43b90709585f 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -38,6 +38,9 @@ #include <net/netlink.h> #include <net/genetlink.h> +#define CREATE_TRACE_POINTS +#include <trace/events/thermal.h> + #include "thermal_core.h" #include "thermal_hwmon.h" @@ -368,6 +371,8 @@ static void handle_critical_trips(struct thermal_zone_device *tz, if (tz->temperature < trip_temp) return; + trace_thermal_zone_trip(tz, trip, trip_type); + if (tz->ops->notify) tz->ops->notify(tz, trip, trip_type); @@ -463,6 +468,7 @@ static void update_temperature(struct thermal_zone_device *tz) tz->temperature = temp; mutex_unlock(&tz->lock); + trace_thermal_temperature(tz); dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n", tz->last_temperature, tz->temperature); } @@ -1287,6 +1293,7 @@ void thermal_cdev_update(struct thermal_cooling_device *cdev) mutex_unlock(&cdev->lock); cdev->ops->set_cur_state(cdev, target); cdev->updated = true; + trace_cdev_update(cdev, target); dev_dbg(&cdev->device, "set to state %lu\n", target); } EXPORT_SYMBOL(thermal_cdev_update); @@ -1568,8 +1575,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, thermal_zone_device_update(tz); - if (!result) - return tz; + return tz; unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); @@ -1790,6 +1796,10 @@ static int __init thermal_register_governors(void) if (result) return result; + result = thermal_gov_bang_bang_register(); + if (result) + return result; + return thermal_gov_user_space_register(); } @@ -1797,6 +1807,7 @@ static void thermal_unregister_governors(void) { thermal_gov_step_wise_unregister(); thermal_gov_fair_share_unregister(); + thermal_gov_bang_bang_unregister(); thermal_gov_user_space_unregister(); } diff --git a/drivers/thermal/thermal_core.h b/drivers/thermal/thermal_core.h index 3db339fb636f..d15d243de27a 100644 --- a/drivers/thermal/thermal_core.h +++ b/drivers/thermal/thermal_core.h @@ -69,6 +69,14 @@ static inline int thermal_gov_fair_share_register(void) { return 0; } static inline void thermal_gov_fair_share_unregister(void) {} #endif /* CONFIG_THERMAL_GOV_FAIR_SHARE */ +#ifdef CONFIG_THERMAL_GOV_BANG_BANG +int thermal_gov_bang_bang_register(void); +void thermal_gov_bang_bang_unregister(void); +#else +static inline int thermal_gov_bang_bang_register(void) { return 0; } +static inline void thermal_gov_bang_bang_unregister(void) {} +#endif /* CONFIG_THERMAL_GOV_BANG_BANG */ + #ifdef CONFIG_THERMAL_GOV_USER_SPACE int thermal_gov_user_space_register(void); void thermal_gov_user_space_unregister(void); |