diff options
Diffstat (limited to 'drivers/tty/mxser.c')
| -rw-r--r-- | drivers/tty/mxser.c | 2757 |
1 files changed, 2757 insertions, 0 deletions
diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c new file mode 100644 index 000000000000..d188f378684d --- /dev/null +++ b/drivers/tty/mxser.c @@ -0,0 +1,2757 @@ +/* + * mxser.c -- MOXA Smartio/Industio family multiport serial driver. + * + * Copyright (C) 1999-2006 Moxa Technologies (support@moxa.com). + * Copyright (C) 2006-2008 Jiri Slaby <jirislaby@gmail.com> + * + * This code is loosely based on the 1.8 moxa driver which is based on + * Linux serial driver, written by Linus Torvalds, Theodore T'so and + * others. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox + * <alan@lxorguk.ukuu.org.uk>. The original 1.8 code is available on + * www.moxa.com. + * - Fixed x86_64 cleanness + */ + +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/timer.h> +#include <linux/interrupt.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/serial_reg.h> +#include <linux/major.h> +#include <linux/string.h> +#include <linux/fcntl.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/mm.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/bitops.h> +#include <linux/slab.h> + +#include <asm/system.h> +#include <asm/io.h> +#include <asm/irq.h> +#include <asm/uaccess.h> + +#include "mxser.h" + +#define MXSER_VERSION "2.0.5" /* 1.14 */ +#define MXSERMAJOR 174 + +#define MXSER_BOARDS 4 /* Max. boards */ +#define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ +#define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) +#define MXSER_ISR_PASS_LIMIT 100 + +/*CheckIsMoxaMust return value*/ +#define MOXA_OTHER_UART 0x00 +#define MOXA_MUST_MU150_HWID 0x01 +#define MOXA_MUST_MU860_HWID 0x02 + +#define WAKEUP_CHARS 256 + +#define UART_MCR_AFE 0x20 +#define UART_LSR_SPECIAL 0x1E + +#define PCI_DEVICE_ID_POS104UL 0x1044 +#define PCI_DEVICE_ID_CB108 0x1080 +#define PCI_DEVICE_ID_CP102UF 0x1023 +#define PCI_DEVICE_ID_CP112UL 0x1120 +#define PCI_DEVICE_ID_CB114 0x1142 +#define PCI_DEVICE_ID_CP114UL 0x1143 +#define PCI_DEVICE_ID_CB134I 0x1341 +#define PCI_DEVICE_ID_CP138U 0x1380 + + +#define C168_ASIC_ID 1 +#define C104_ASIC_ID 2 +#define C102_ASIC_ID 0xB +#define CI132_ASIC_ID 4 +#define CI134_ASIC_ID 3 +#define CI104J_ASIC_ID 5 + +#define MXSER_HIGHBAUD 1 +#define MXSER_HAS2 2 + +/* This is only for PCI */ +static const struct { + int type; + int tx_fifo; + int rx_fifo; + int xmit_fifo_size; + int rx_high_water; + int rx_trigger; + int rx_low_water; + long max_baud; +} Gpci_uart_info[] = { + {MOXA_OTHER_UART, 16, 16, 16, 14, 14, 1, 921600L}, + {MOXA_MUST_MU150_HWID, 64, 64, 64, 48, 48, 16, 230400L}, + {MOXA_MUST_MU860_HWID, 128, 128, 128, 96, 96, 32, 921600L} +}; +#define UART_INFO_NUM ARRAY_SIZE(Gpci_uart_info) + +struct mxser_cardinfo { + char *name; + unsigned int nports; + unsigned int flags; +}; + +static const struct mxser_cardinfo mxser_cards[] = { +/* 0*/ { "C168 series", 8, }, + { "C104 series", 4, }, + { "CI-104J series", 4, }, + { "C168H/PCI series", 8, }, + { "C104H/PCI series", 4, }, +/* 5*/ { "C102 series", 4, MXSER_HAS2 }, /* C102-ISA */ + { "CI-132 series", 4, MXSER_HAS2 }, + { "CI-134 series", 4, }, + { "CP-132 series", 2, }, + { "CP-114 series", 4, }, +/*10*/ { "CT-114 series", 4, }, + { "CP-102 series", 2, MXSER_HIGHBAUD }, + { "CP-104U series", 4, }, + { "CP-168U series", 8, }, + { "CP-132U series", 2, }, +/*15*/ { "CP-134U series", 4, }, + { "CP-104JU series", 4, }, + { "Moxa UC7000 Serial", 8, }, /* RC7000 */ + { "CP-118U series", 8, }, + { "CP-102UL series", 2, }, +/*20*/ { "CP-102U series", 2, }, + { "CP-118EL series", 8, }, + { "CP-168EL series", 8, }, + { "CP-104EL series", 4, }, + { "CB-108 series", 8, }, +/*25*/ { "CB-114 series", 4, }, + { "CB-134I series", 4, }, + { "CP-138U series", 8, }, + { "POS-104UL series", 4, }, + { "CP-114UL series", 4, }, +/*30*/ { "CP-102UF series", 2, }, + { "CP-112UL series", 2, }, +}; + +/* driver_data correspond to the lines in the structure above + see also ISA probe function before you change something */ +static struct pci_device_id mxser_pcibrds[] = { + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C168), .driver_data = 3 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_C104), .driver_data = 4 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132), .driver_data = 8 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP114), .driver_data = 9 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CT114), .driver_data = 10 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102), .driver_data = 11 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104U), .driver_data = 12 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168U), .driver_data = 13 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP132U), .driver_data = 14 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP134U), .driver_data = 15 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104JU),.driver_data = 16 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_RC7000), .driver_data = 17 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118U), .driver_data = 18 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102UL),.driver_data = 19 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP102U), .driver_data = 20 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP118EL),.driver_data = 21 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP168EL),.driver_data = 22 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_MOXA_CP104EL),.driver_data = 23 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB108), .driver_data = 24 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB114), .driver_data = 25 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CB134I), .driver_data = 26 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP112UL), .driver_data = 31 }, + { } +}; +MODULE_DEVICE_TABLE(pci, mxser_pcibrds); + +static unsigned long ioaddr[MXSER_BOARDS]; +static int ttymajor = MXSERMAJOR; + +/* Variables for insmod */ + +MODULE_AUTHOR("Casper Yang"); +MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); +module_param_array(ioaddr, ulong, NULL, 0); +MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); +module_param(ttymajor, int, 0); +MODULE_LICENSE("GPL"); + +struct mxser_log { + int tick; + unsigned long rxcnt[MXSER_PORTS]; + unsigned long txcnt[MXSER_PORTS]; +}; + +struct mxser_mon { + unsigned long rxcnt; + unsigned long txcnt; + unsigned long up_rxcnt; + unsigned long up_txcnt; + int modem_status; + unsigned char hold_reason; +}; + +struct mxser_mon_ext { + unsigned long rx_cnt[32]; + unsigned long tx_cnt[32]; + unsigned long up_rxcnt[32]; + unsigned long up_txcnt[32]; + int modem_status[32]; + + long baudrate[32]; + int databits[32]; + int stopbits[32]; + int parity[32]; + int flowctrl[32]; + int fifo[32]; + int iftype[32]; +}; + +struct mxser_board; + +struct mxser_port { + struct tty_port port; + struct mxser_board *board; + + unsigned long ioaddr; + unsigned long opmode_ioaddr; + int max_baud; + + int rx_high_water; + int rx_trigger; /* Rx fifo trigger level */ + int rx_low_water; + int baud_base; /* max. speed */ + int type; /* UART type */ + + int x_char; /* xon/xoff character */ + int IER; /* Interrupt Enable Register */ + int MCR; /* Modem control register */ + + unsigned char stop_rx; + unsigned char ldisc_stop_rx; + + int custom_divisor; + unsigned char err_shadow; + + struct async_icount icount; /* kernel counters for 4 input interrupts */ + int timeout; + + int read_status_mask; + int ignore_status_mask; + int xmit_fifo_size; + int xmit_head; + int xmit_tail; + int xmit_cnt; + + struct ktermios normal_termios; + + struct mxser_mon mon_data; + + spinlock_t slock; +}; + +struct mxser_board { + unsigned int idx; + int irq; + const struct mxser_cardinfo *info; + unsigned long vector; + unsigned long vector_mask; + + int chip_flag; + int uart_type; + + struct mxser_port ports[MXSER_PORTS_PER_BOARD]; +}; + +struct mxser_mstatus { + tcflag_t cflag; + int cts; + int dsr; + int ri; + int dcd; +}; + +static struct mxser_board mxser_boards[MXSER_BOARDS]; +static struct tty_driver *mxvar_sdriver; +static struct mxser_log mxvar_log; +static int mxser_set_baud_method[MXSER_PORTS + 1]; + +static void mxser_enable_must_enchance_mode(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr |= MOXA_MUST_EFR_EFRB_ENABLE; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static void mxser_disable_must_enchance_mode(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_EFRB_ENABLE; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} +#endif + +static void mxser_set_must_xon1_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK0; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_XON1_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_set_must_xoff1_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK0; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_XOFF1_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_set_must_fifo_value(struct mxser_port *info) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(info->ioaddr + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, info->ioaddr + UART_LCR); + + efr = inb(info->ioaddr + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK1; + + outb(efr, info->ioaddr + MOXA_MUST_EFR_REGISTER); + outb((u8)info->rx_high_water, info->ioaddr + MOXA_MUST_RBRTH_REGISTER); + outb((u8)info->rx_trigger, info->ioaddr + MOXA_MUST_RBRTI_REGISTER); + outb((u8)info->rx_low_water, info->ioaddr + MOXA_MUST_RBRTL_REGISTER); + outb(oldlcr, info->ioaddr + UART_LCR); +} + +static void mxser_set_must_enum_value(unsigned long baseio, u8 value) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK2; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(value, baseio + MOXA_MUST_ENUM_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static void mxser_get_must_hardware_id(unsigned long baseio, u8 *pId) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_BANK_MASK; + efr |= MOXA_MUST_EFR_BANK2; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + *pId = inb(baseio + MOXA_MUST_HWID_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} +#endif + +static void SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_enable_must_tx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_TX_MASK; + efr |= MOXA_MUST_EFR_SF_TX1; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_disable_must_tx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_TX_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_enable_must_rx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_RX_MASK; + efr |= MOXA_MUST_EFR_SF_RX1; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +static void mxser_disable_must_rx_software_flow_control(unsigned long baseio) +{ + u8 oldlcr; + u8 efr; + + oldlcr = inb(baseio + UART_LCR); + outb(MOXA_MUST_ENTER_ENCHANCE, baseio + UART_LCR); + + efr = inb(baseio + MOXA_MUST_EFR_REGISTER); + efr &= ~MOXA_MUST_EFR_SF_RX_MASK; + + outb(efr, baseio + MOXA_MUST_EFR_REGISTER); + outb(oldlcr, baseio + UART_LCR); +} + +#ifdef CONFIG_PCI +static int __devinit CheckIsMoxaMust(unsigned long io) +{ + u8 oldmcr, hwid; + int i; + + outb(0, io + UART_LCR); + mxser_disable_must_enchance_mode(io); + oldmcr = inb(io + UART_MCR); + outb(0, io + UART_MCR); + mxser_set_must_xon1_value(io, 0x11); + if ((hwid = inb(io + UART_MCR)) != 0) { + outb(oldmcr, io + UART_MCR); + return MOXA_OTHER_UART; + } + + mxser_get_must_hardware_id(io, &hwid); + for (i = 1; i < UART_INFO_NUM; i++) { /* 0 = OTHER_UART */ + if (hwid == Gpci_uart_info[i].type) + return (int)hwid; + } + return MOXA_OTHER_UART; +} +#endif + +static void process_txrx_fifo(struct mxser_port *info) +{ + int i; + + if ((info->type == PORT_16450) || (info->type == PORT_8250)) { + info->rx_trigger = 1; + info->rx_high_water = 1; + info->rx_low_water = 1; + info->xmit_fifo_size = 1; + } else + for (i = 0; i < UART_INFO_NUM; i++) + if (info->board->chip_flag == Gpci_uart_info[i].type) { + info->rx_trigger = Gpci_uart_info[i].rx_trigger; + info->rx_low_water = Gpci_uart_info[i].rx_low_water; + info->rx_high_water = Gpci_uart_info[i].rx_high_water; + info->xmit_fifo_size = Gpci_uart_info[i].xmit_fifo_size; + break; + } +} + +static unsigned char mxser_get_msr(int baseaddr, int mode, int port) +{ + static unsigned char mxser_msr[MXSER_PORTS + 1]; + unsigned char status = 0; + + status = inb(baseaddr + UART_MSR); + + mxser_msr[port] &= 0x0F; + mxser_msr[port] |= status; + status = mxser_msr[port]; + if (mode) + mxser_msr[port] = 0; + + return status; +} + +static int mxser_carrier_raised(struct tty_port *port) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + return (inb(mp->ioaddr + UART_MSR) & UART_MSR_DCD)?1:0; +} + +static void mxser_dtr_rts(struct tty_port *port, int on) +{ + struct mxser_port *mp = container_of(port, struct mxser_port, port); + unsigned long flags; + + spin_lock_irqsave(&mp->slock, flags); + if (on) + outb(inb(mp->ioaddr + UART_MCR) | + UART_MCR_DTR | UART_MCR_RTS, mp->ioaddr + UART_MCR); + else + outb(inb(mp->ioaddr + UART_MCR)&~(UART_MCR_DTR | UART_MCR_RTS), + mp->ioaddr + UART_MCR); + spin_unlock_irqrestore(&mp->slock, flags); +} + +static int mxser_set_baud(struct tty_struct *tty, long newspd) +{ + struct mxser_port *info = tty->driver_data; + int quot = 0, baud; + unsigned char cval; + + if (!info->ioaddr) + return -1; + + if (newspd > info->max_baud) + return -1; + + if (newspd == 134) { + quot = 2 * info->baud_base / 269; + tty_encode_baud_rate(tty, 134, 134); + } else if (newspd) { + quot = info->baud_base / newspd; + if (quot == 0) + quot = 1; + baud = info->baud_base/quot; + tty_encode_baud_rate(tty, baud, baud); + } else { + quot = 0; + } + + info->timeout = ((info->xmit_fifo_size * HZ * 10 * quot) / info->baud_base); + info->timeout += HZ / 50; /* Add .02 seconds of slop */ + + if (quot) { + info->MCR |= UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + } else { + info->MCR &= ~UART_MCR_DTR; + outb(info->MCR, info->ioaddr + UART_MCR); + return 0; + } + + cval = inb(info->ioaddr + UART_LCR); + + outb(cval | UART_LCR_DLAB, info->ioaddr + UART_LCR); /* set DLAB */ + + outb(quot & 0xff, info->ioaddr + UART_DLL); /* LS of divisor */ + outb(quot >> 8, info->ioaddr + UART_DLM); /* MS of divisor */ + outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ + +#ifdef BOTHER + if (C_BAUD(tty) == BOTHER) { + quot = info->baud_base % newspd; + quot *= 8; + if (quot % newspd > newspd / 2) { + quot /= newspd; + quot++; + } else + quot /= newspd; + + mxser_set_must_enum_value(info->ioaddr, quot); + } else +#endif + mxser_set_must_enum_value(info->ioaddr, 0); + + return 0; +} + +/* + * This routine is called to set the UART divisor registers to match + * the specified baud rate for a serial port. + */ +static int mxser_change_speed(struct tty_struct *tty, + struct ktermios *old_termios) +{ + struct mxser_port *info = tty->driver_data; + unsigned cflag, cval, fcr; + int ret = 0; + unsigned char status; + + cflag = tty->termios->c_cflag; + if (!info->ioaddr) + return ret; + + if (mxser_set_baud_method[tty->index] == 0) + mxser_set_baud(tty, tty_get_baud_rate(tty)); + + /* byte size and parity */ + switch (cflag & CSIZE) { + case CS5: + cval = 0x00; + break; + case CS6: + cval = 0x01; + break; + case CS7: + cval = 0x02; + break; + case CS8: + cval = 0x03; + break; + default: + cval = 0x00; + break; /* too keep GCC shut... */ + } + if (cflag & CSTOPB) + cval |= 0x04; + if (cflag & PARENB) + cval |= UART_LCR_PARITY; + if (!(cflag & PARODD)) + cval |= UART_LCR_EPAR; + if (cflag & CMSPAR) + cval |= UART_LCR_SPAR; + + if ((info->type == PORT_8250) || (info->type == PORT_16450)) { + if (info->board->chip_flag) { + fcr = UART_FCR_ENABLE_FIFO; + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); + } else + fcr = 0; + } else { + fcr = UART_FCR_ENABLE_FIFO; + if (info->board->chip_flag) { + fcr |= MOXA_MUST_FCR_GDA_MODE_ENABLE; + mxser_set_must_fifo_value(info); + } else { + switch (info->rx_trigger) { + case 1: + fcr |= UART_FCR_TRIGGER_1; + break; + case 4: + fcr |= UART_FCR_TRIGGER_4; + break; + case 8: + fcr |= UART_FCR_TRIGGER_8; + break; + default: + fcr |= UART_FCR_TRIGGER_14; + break; + } + } + } + + /* CTS flow control flag and modem status interrupts */ + info->IER &= ~UART_IER_MSI; + info->MCR &= ~UART_MCR_AFE; + if (cflag & CRTSCTS) { + info->port.flags |= ASYNC_CTS_FLOW; + info->IER |= UART_IER_MSI; + if ((info->type == PORT_16550A) || (info->board->chip_flag)) { + info->MCR |= UART_MCR_AFE; + } else { + status = inb(info->ioaddr + UART_MSR); + if (tty->hw_stopped) { + if (status & UART_MSR_CTS) { + tty->hw_stopped = 0; + if (info->type != PORT_16550A && + !info->board->chip_flag) { + outb(info->IER & ~UART_IER_THRI, + info->ioaddr + + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + tty_wakeup(tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + tty->hw_stopped = 1; + if ((info->type != PORT_16550A) && + (!info->board->chip_flag)) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + + UART_IER); + } + } + } + } + } else { + info->port.flags &= ~ASYNC_CTS_FLOW; + } + outb(info->MCR, info->ioaddr + UART_MCR); + if (cflag & CLOCAL) { + info->port.flags &= ~ASYNC_CHECK_CD; + } else { + info->port.flags |= ASYNC_CHECK_CD; + info->IER |= UART_IER_MSI; + } + outb(info->IER, info->ioaddr + UART_IER); + + /* + * Set up parity check flag + */ + info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; + if (I_INPCK(tty)) + info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; + if (I_BRKINT(tty) || I_PARMRK(tty)) + info->read_status_mask |= UART_LSR_BI; + + info->ignore_status_mask = 0; + + if (I_IGNBRK(tty)) { + info->ignore_status_mask |= UART_LSR_BI; + info->read_status_mask |= UART_LSR_BI; + /* + * If we're ignore parity and break indicators, ignore + * overruns too. (For real raw support). + */ + if (I_IGNPAR(tty)) { + info->ignore_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + info->read_status_mask |= + UART_LSR_OE | + UART_LSR_PE | + UART_LSR_FE; + } + } + if (info->board->chip_flag) { + mxser_set_must_xon1_value(info->ioaddr, START_CHAR(tty)); + mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(tty)); + if (I_IXON(tty)) { + mxser_enable_must_rx_software_flow_control( + info->ioaddr); + } else { + mxser_disable_must_rx_software_flow_control( + info->ioaddr); + } + if (I_IXOFF(tty)) { + mxser_enable_must_tx_software_flow_control( + info->ioaddr); + } else { + mxser_disable_must_tx_software_flow_control( + info->ioaddr); + } + } + + + outb(fcr, info->ioaddr + UART_FCR); /* set fcr */ + outb(cval, info->ioaddr + UART_LCR); + + return ret; +} + +static void mxser_check_modem_status(struct tty_struct *tty, + struct mxser_port *port, int status) +{ + /* update input line counters */ + if (status & UART_MSR_TERI) + port->icount.rng++; + if (status & UART_MSR_DDSR) + port->icount.dsr++; + if (status & UART_MSR_DDCD) + port->icount.dcd++; + if (status & UART_MSR_DCTS) + port->icount.cts++; + port->mon_data.modem_status = status; + wake_up_interruptible(&port->port.delta_msr_wait); + + if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { + if (status & UART_MSR_DCD) + wake_up_interruptible(&port->port.open_wait); + } + + if (port->port.flags & ASYNC_CTS_FLOW) { + if (tty->hw_stopped) { + if (status & UART_MSR_CTS) { + tty->hw_stopped = 0; + + if ((port->type != PORT_16550A) && + (!port->board->chip_flag)) { + outb(port->IER & ~UART_IER_THRI, + port->ioaddr + UART_IER); + port->IER |= UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + tty_wakeup(tty); + } + } else { + if (!(status & UART_MSR_CTS)) { + tty->hw_stopped = 1; + if (port->type != PORT_16550A && + !port->board->chip_flag) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + + UART_IER); + } + } + } + } +} + +static int mxser_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long page; + unsigned long flags; + + page = __get_free_page(GFP_KERNEL); + if (!page) + return -ENOMEM; + + spin_lock_irqsave(&info->slock, flags); + + if (!info->ioaddr || !info->type) { + set_bit(TTY_IO_ERROR, &tty->flags); + free_page(page); + spin_unlock_irqrestore(&info->slock, flags); + return 0; + } + info->port.xmit_buf = (unsigned char *) page; + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in mxser_change_speed()) + */ + if (info->board->chip_flag) + outb((UART_FCR_CLEAR_RCVR | + UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE), info->ioaddr + UART_FCR); + else + outb((UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); + + /* + * At this point there's no way the LSR could still be 0xFF; + * if it is, then bail out, because there's likely no UART + * here. + */ + if (inb(info->ioaddr + UART_LSR) == 0xff) { + spin_unlock_irqrestore(&info->slock, flags); + if (capable(CAP_SYS_ADMIN)) { + set_bit(TTY_IO_ERROR, &tty->flags); + return 0; + } else + return -ENODEV; + } + + /* + * Clear the interrupt registers. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); + + /* + * Now, initialize the UART + */ + outb(UART_LCR_WLEN8, info->ioaddr + UART_LCR); /* reset DLAB */ + info->MCR = UART_MCR_DTR | UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + + /* + * Finally, enable interrupts + */ + info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; + + if (info->board->chip_flag) + info->IER |= MOXA_MUST_IER_EGDAI; + outb(info->IER, info->ioaddr + UART_IER); /* enable interrupts */ + + /* + * And clear the interrupt registers again for luck. + */ + (void) inb(info->ioaddr + UART_LSR); + (void) inb(info->ioaddr + UART_RX); + (void) inb(info->ioaddr + UART_IIR); + (void) inb(info->ioaddr + UART_MSR); + + clear_bit(TTY_IO_ERROR, &tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + mxser_change_speed(tty, NULL); + spin_unlock_irqrestore(&info->slock, flags); + + return 0; +} + +/* + * This routine will shutdown a serial port + */ +static void mxser_shutdown_port(struct tty_port *port) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + + /* + * clear delta_msr_wait queue to avoid mem leaks: we may free the irq + * here so the queue might never be waken up + */ + wake_up_interruptible(&info->port.delta_msr_wait); + + /* + * Free the xmit buffer, if necessary + */ + if (info->port.xmit_buf) { + free_page((unsigned long) info->port.xmit_buf); + info->port.xmit_buf = NULL; + } + + info->IER = 0; + outb(0x00, info->ioaddr + UART_IER); + + /* clear Rx/Tx FIFO's */ + if (info->board->chip_flag) + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | + MOXA_MUST_FCR_GDA_MODE_ENABLE, + info->ioaddr + UART_FCR); + else + outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT, + info->ioaddr + UART_FCR); + + /* read data port to reset things */ + (void) inb(info->ioaddr + UART_RX); + + + if (info->board->chip_flag) + SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); + + spin_unlock_irqrestore(&info->slock, flags); +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its async structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +static int mxser_open(struct tty_struct *tty, struct file *filp) +{ + struct mxser_port *info; + int line; + + line = tty->index; + if (line == MXSER_PORTS) + return 0; + if (line < 0 || line > MXSER_PORTS) + return -ENODEV; + info = &mxser_boards[line / MXSER_PORTS_PER_BOARD].ports[line % MXSER_PORTS_PER_BOARD]; + if (!info->ioaddr) + return -ENODEV; + + tty->driver_data = info; + return tty_port_open(&info->port, tty, filp); +} + +static void mxser_flush_buffer(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + char fcr; + unsigned long flags; + + + spin_lock_irqsave(&info->slock, flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + fcr = inb(info->ioaddr + UART_FCR); + outb((fcr | UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT), + info->ioaddr + UART_FCR); + outb(fcr, info->ioaddr + UART_FCR); + + spin_unlock_irqrestore(&info->slock, flags); + + tty_wakeup(tty); +} + + +static void mxser_close_port(struct tty_port *port) +{ + struct mxser_port *info = container_of(port, struct mxser_port, port); + unsigned long timeout; + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + info->IER &= ~UART_IER_RLSI; + if (info->board->chip_flag) + info->IER &= ~MOXA_MUST_RECV_ISR; + + outb(info->IER, info->ioaddr + UART_IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { + schedule_timeout_interruptible(5); + if (time_after(jiffies, timeout)) + break; + } +} + +/* + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * async structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + */ +static void mxser_close(struct tty_struct *tty, struct file *filp) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + + if (tty->index == MXSER_PORTS || info == NULL) + return; + if (tty_port_close_start(port, tty, filp) == 0) + return; + mutex_lock(&port->mutex); + mxser_close_port(port); + mxser_flush_buffer(tty); + mxser_shutdown_port(port); + clear_bit(ASYNCB_INITIALIZED, &port->flags); + mutex_unlock(&port->mutex); + /* Right now the tty_port set is done outside of the close_end helper + as we don't yet have everyone using refcounts */ + tty_port_close_end(port, tty); + tty_port_tty_set(port, NULL); +} + +static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) +{ + int c, total = 0; + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (!info->port.xmit_buf) + return 0; + + while (1) { + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + if (c <= 0) + break; + + memcpy(info->port.xmit_buf + info->xmit_head, buf, c); + spin_lock_irqsave(&info->slock, flags); + info->xmit_head = (info->xmit_head + c) & + (SERIAL_XMIT_SIZE - 1); + info->xmit_cnt += c; + spin_unlock_irqrestore(&info->slock, flags); + + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped) { + if (!tty->hw_stopped || + (info->type == PORT_16550A) || + (info->board->chip_flag)) { + spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + spin_unlock_irqrestore(&info->slock, flags); + } + } + return total; +} + +static int mxser_put_char(struct tty_struct *tty, unsigned char ch) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (!info->port.xmit_buf) + return 0; + + if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) + return 0; + + spin_lock_irqsave(&info->slock, flags); + info->port.xmit_buf[info->xmit_head++] = ch; + info->xmit_head &= SERIAL_XMIT_SIZE - 1; + info->xmit_cnt++; + spin_unlock_irqrestore(&info->slock, flags); + if (!tty->stopped) { + if (!tty->hw_stopped || + (info->type == PORT_16550A) || + info->board->chip_flag) { + spin_lock_irqsave(&info->slock, flags); + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + spin_unlock_irqrestore(&info->slock, flags); + } + } + return 1; +} + + +static void mxser_flush_chars(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf || + (tty->hw_stopped && info->type != PORT_16550A && + !info->board->chip_flag)) + return; + + spin_lock_irqsave(&info->slock, flags); + + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + + spin_unlock_irqrestore(&info->slock, flags); +} + +static int mxser_write_room(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + int ret; + + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + return ret < 0 ? 0 : ret; +} + +static int mxser_chars_in_buffer(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + return info->xmit_cnt; +} + +/* + * ------------------------------------------------------------ + * friends of mxser_ioctl() + * ------------------------------------------------------------ + */ +static int mxser_get_serial_info(struct tty_struct *tty, + struct serial_struct __user *retinfo) +{ + struct mxser_port *info = tty->driver_data; + struct serial_struct tmp = { + .type = info->type, + .line = tty->index, + .port = info->ioaddr, + .irq = info->board->irq, + .flags = info->port.flags, + .baud_base = info->baud_base, + .close_delay = info->port.close_delay, + .closing_wait = info->port.closing_wait, + .custom_divisor = info->custom_divisor, + .hub6 = 0 + }; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + return 0; +} + +static int mxser_set_serial_info(struct tty_struct *tty, + struct serial_struct __user *new_info) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + struct serial_struct new_serial; + speed_t baud; + unsigned long sl_flags; + unsigned int flags; + int retval = 0; + + if (!new_info || !info->ioaddr) + return -ENODEV; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + + if (new_serial.irq != info->board->irq || + new_serial.port != info->ioaddr) + return -EINVAL; + + flags = port->flags & ASYNC_SPD_MASK; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.close_delay != info->port.close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) + return -EPERM; + info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | + (new_serial.flags & ASYNC_USR_MASK)); + } else { + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + port->flags = ((port->flags & ~ASYNC_FLAGS) | + (new_serial.flags & ASYNC_FLAGS)); + port->close_delay = new_serial.close_delay * HZ / 100; + port->closing_wait = new_serial.closing_wait * HZ / 100; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + (new_serial.baud_base != info->baud_base || + new_serial.custom_divisor != + info->custom_divisor)) { + if (new_serial.custom_divisor == 0) + return -EINVAL; + baud = new_serial.baud_base / new_serial.custom_divisor; + tty_encode_baud_rate(tty, baud, baud); + } + } + + info->type = new_serial.type; + + process_txrx_fifo(info); + + if (test_bit(ASYNCB_INITIALIZED, &port->flags)) { + if (flags != (port->flags & ASYNC_SPD_MASK)) { + spin_lock_irqsave(&info->slock, sl_flags); + mxser_change_speed(tty, NULL); + spin_unlock_irqrestore(&info->slock, sl_flags); + } + } else { + retval = mxser_activate(port, tty); + if (retval == 0) + set_bit(ASYNCB_INITIALIZED, &port->flags); + } + return retval; +} + +/* + * mxser_get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int mxser_get_lsr_info(struct mxser_port *info, + unsigned int __user *value) +{ + unsigned char status; + unsigned int result; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_LSR); + spin_unlock_irqrestore(&info->slock, flags); + result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); + return put_user(result, value); +} + +static int mxser_tiocmget(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned char control, status; + unsigned long flags; + + + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + control = info->MCR; + + spin_lock_irqsave(&info->slock, flags); + status = inb(info->ioaddr + UART_MSR); + if (status & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, info, status); + spin_unlock_irqrestore(&info->slock, flags); + return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) | + ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) | + ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) | + ((status & UART_MSR_RI) ? TIOCM_RNG : 0) | + ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) | + ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); +} + +static int mxser_tiocmset(struct tty_struct *tty, + unsigned int set, unsigned int clear) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + + if (tty->index == MXSER_PORTS) + return -ENOIOCTLCMD; + if (test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + spin_lock_irqsave(&info->slock, flags); + + if (set & TIOCM_RTS) + info->MCR |= UART_MCR_RTS; + if (set & TIOCM_DTR) + info->MCR |= UART_MCR_DTR; + + if (clear & TIOCM_RTS) + info->MCR &= ~UART_MCR_RTS; + if (clear & TIOCM_DTR) + info->MCR &= ~UART_MCR_DTR; + + outb(info->MCR, info->ioaddr + UART_MCR); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +static int __init mxser_program_mode(int port) +{ + int id, i, j, n; + + outb(0, port); + outb(0, port); + outb(0, port); + (void)inb(port); + (void)inb(port); + outb(0, port); + (void)inb(port); + + id = inb(port + 1) & 0x1F; + if ((id != C168_ASIC_ID) && + (id != C104_ASIC_ID) && + (id != C102_ASIC_ID) && + (id != CI132_ASIC_ID) && + (id != CI134_ASIC_ID) && + (id != CI104J_ASIC_ID)) + return -1; + for (i = 0, j = 0; i < 4; i++) { + n = inb(port + 2); + if (n == 'M') { + j = 1; + } else if ((j == 1) && (n == 1)) { + j = 2; + break; + } else + j = 0; + } + if (j != 2) + id = -2; + return id; +} + +static void __init mxser_normal_mode(int port) +{ + int i, n; + + outb(0xA5, port + 1); + outb(0x80, port + 3); + outb(12, port + 0); /* 9600 bps */ + outb(0, port + 1); + outb(0x03, port + 3); /* 8 data bits */ + outb(0x13, port + 4); /* loop back mode */ + for (i = 0; i < 16; i++) { + n = inb(port + 5); + if ((n & 0x61) == 0x60) + break; + if ((n & 1) == 1) + (void)inb(port); + } + outb(0x00, port + 4); +} + +#define CHIP_SK 0x01 /* Serial Data Clock in Eprom */ +#define CHIP_DO 0x02 /* Serial Data Output in Eprom */ +#define CHIP_CS 0x04 /* Serial Chip Select in Eprom */ +#define CHIP_DI 0x08 /* Serial Data Input in Eprom */ +#define EN_CCMD 0x000 /* Chip's command register */ +#define EN0_RSARLO 0x008 /* Remote start address reg 0 */ +#define EN0_RSARHI 0x009 /* Remote start address reg 1 */ +#define EN0_RCNTLO 0x00A /* Remote byte count reg WR */ +#define EN0_RCNTHI 0x00B /* Remote byte count reg WR */ +#define EN0_DCFG 0x00E /* Data configuration reg WR */ +#define EN0_PORT 0x010 /* Rcv missed frame error counter RD */ +#define ENC_PAGE0 0x000 /* Select page 0 of chip registers */ +#define ENC_PAGE3 0x0C0 /* Select page 3 of chip registers */ +static int __init mxser_read_register(int port, unsigned short *regs) +{ + int i, k, value, id; + unsigned int j; + + id = mxser_program_mode(port); + if (id < 0) + return id; + for (i = 0; i < 14; i++) { + k = (i & 0x3F) | 0x180; + for (j = 0x100; j > 0; j >>= 1) { + outb(CHIP_CS, port); + if (k & j) { + outb(CHIP_CS | CHIP_DO, port); + outb(CHIP_CS | CHIP_DO | CHIP_SK, port); /* A? bit of read */ + } else { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); /* A? bit of read */ + } + } + (void)inb(port); + value = 0; + for (k = 0, j = 0x8000; k < 16; k++, j >>= 1) { + outb(CHIP_CS, port); + outb(CHIP_CS | CHIP_SK, port); + if (inb(port) & CHIP_DI) + value |= j; + } + regs[i] = value; + outb(0, port); + } + mxser_normal_mode(port); + return id; +} + +static int mxser_ioctl_special(unsigned int cmd, void __user *argp) +{ + struct mxser_port *ip; + struct tty_port *port; + struct tty_struct *tty; + int result, status; + unsigned int i, j; + int ret = 0; + + switch (cmd) { + case MOXA_GET_MAJOR: + if (printk_ratelimit()) + printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl " + "%x (GET_MAJOR), fix your userspace\n", + current->comm, cmd); + return put_user(ttymajor, (int __user *)argp); + + case MOXA_CHKPORTENABLE: + result = 0; + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) + if (mxser_boards[i].ports[j].ioaddr) + result |= (1 << i); + return put_user(result, (unsigned long __user *)argp); + case MOXA_GETDATACOUNT: + /* The receive side is locked by port->slock but it isn't + clear that an exact snapshot is worth copying here */ + if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) + ret = -EFAULT; + return ret; + case MOXA_GETMSTATUS: { + struct mxser_mstatus ms, __user *msu = argp; + for (i = 0; i < MXSER_BOARDS; i++) + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + memset(&ms, 0, sizeof(ms)); + + mutex_lock(&port->mutex); + if (!ip->ioaddr) + goto copy; + + tty = tty_port_tty_get(port); + + if (!tty || !tty->termios) + ms.cflag = ip->normal_termios.c_cflag; + else + ms.cflag = tty->termios->c_cflag; + tty_kref_put(tty); + spin_lock_irq(&ip->slock); + status = inb(ip->ioaddr + UART_MSR); + spin_unlock_irq(&ip->slock); + if (status & UART_MSR_DCD) + ms.dcd = 1; + if (status & UART_MSR_DSR) + ms.dsr = 1; + if (status & UART_MSR_CTS) + ms.cts = 1; + copy: + mutex_unlock(&port->mutex); + if (copy_to_user(msu, &ms, sizeof(ms))) + return -EFAULT; + msu++; + } + return 0; + } + case MOXA_ASPP_MON_EXT: { + struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */ + unsigned int cflag, iflag, p; + u8 opmode; + + me = kzalloc(sizeof(*me), GFP_KERNEL); + if (!me) + return -ENOMEM; + + for (i = 0, p = 0; i < MXSER_BOARDS; i++) { + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { + if (p >= ARRAY_SIZE(me->rx_cnt)) { + i = MXSER_BOARDS; + break; + } + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + + mutex_lock(&port->mutex); + if (!ip->ioaddr) { + mutex_unlock(&port->mutex); + continue; + } + + spin_lock_irq(&ip->slock); + status = mxser_get_msr(ip->ioaddr, 0, p); + + if (status & UART_MSR_TERI) + ip->icount.rng++; + if (status & UART_MSR_DDSR) + ip->icount.dsr++; + if (status & UART_MSR_DDCD) + ip->icount.dcd++; + if (status & UART_MSR_DCTS) + ip->icount.cts++; + + ip->mon_data.modem_status = status; + me->rx_cnt[p] = ip->mon_data.rxcnt; + me->tx_cnt[p] = ip->mon_data.txcnt; + me->up_rxcnt[p] = ip->mon_data.up_rxcnt; + me->up_txcnt[p] = ip->mon_data.up_txcnt; + me->modem_status[p] = + ip->mon_data.modem_status; + spin_unlock_irq(&ip->slock); + + tty = tty_port_tty_get(&ip->port); + + if (!tty || !tty->termios) { + cflag = ip->normal_termios.c_cflag; + iflag = ip->normal_termios.c_iflag; + me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); + } else { + cflag = tty->termios->c_cflag; + iflag = tty->termios->c_iflag; + me->baudrate[p] = tty_get_baud_rate(tty); + } + tty_kref_put(tty); + + me->databits[p] = cflag & CSIZE; + me->stopbits[p] = cflag & CSTOPB; + me->parity[p] = cflag & (PARENB | PARODD | + CMSPAR); + + if (cflag & CRTSCTS) + me->flowctrl[p] |= 0x03; + + if (iflag & (IXON | IXOFF)) + me->flowctrl[p] |= 0x0C; + + if (ip->type == PORT_16550A) + me->fifo[p] = 1; + + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); + opmode &= OP_MODE_MASK; + me->iftype[p] = opmode; + mutex_unlock(&port->mutex); + } + } + if (copy_to_user(argp, me, sizeof(*me))) + ret = -EFAULT; + kfree(me); + return ret; + } + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static int mxser_cflags_changed(struct mxser_port *info, unsigned long arg, + struct async_icount *cprev) +{ + struct async_icount cnow; + unsigned long flags; + int ret; + + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* atomic copy */ + spin_unlock_irqrestore(&info->slock, flags); + + ret = ((arg & TIOCM_RNG) && (cnow.rng != cprev->rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev->dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev->dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev->cts)); + + *cprev = cnow; + + return ret; +} + +static int mxser_ioctl(struct tty_struct *tty, + unsigned int cmd, unsigned long arg) +{ + struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; + struct async_icount cnow; + unsigned long flags; + void __user *argp = (void __user *)arg; + int retval; + + if (tty->index == MXSER_PORTS) + return mxser_ioctl_special(cmd, argp); + + if (cmd == MOXA_SET_OP_MODE || cmd == MOXA_GET_OP_MODE) { + int p; + unsigned long opmode; + static unsigned char ModeMask[] = { 0xfc, 0xf3, 0xcf, 0x3f }; + int shiftbit; + unsigned char val, mask; + + p = tty->index % 4; + if (cmd == MOXA_SET_OP_MODE) { + if (get_user(opmode, (int __user *) argp)) + return -EFAULT; + if (opmode != RS232_MODE && + opmode != RS485_2WIRE_MODE && + opmode != RS422_MODE && + opmode != RS485_4WIRE_MODE) + return -EFAULT; + mask = ModeMask[p]; + shiftbit = p * 2; + spin_lock_irq(&info->slock); + val = inb(info->opmode_ioaddr); + val &= mask; + val |= (opmode << shiftbit); + outb(val, info->opmode_ioaddr); + spin_unlock_irq(&info->slock); + } else { + shiftbit = p * 2; + spin_lock_irq(&info->slock); + opmode = inb(info->opmode_ioaddr) >> shiftbit; + spin_unlock_irq(&info->slock); + opmode &= OP_MODE_MASK; + if (put_user(opmode, (int __user *)argp)) + return -EFAULT; + } + return 0; + } + + if (cmd != TIOCGSERIAL && cmd != TIOCMIWAIT && + test_bit(TTY_IO_ERROR, &tty->flags)) + return -EIO; + + switch (cmd) { + case TIOCGSERIAL: + mutex_lock(&port->mutex); + retval = mxser_get_serial_info(tty, argp); + mutex_unlock(&port->mutex); + return retval; + case TIOCSSERIAL: + mutex_lock(&port->mutex); + retval = mxser_set_serial_info(tty, argp); + mutex_unlock(&port->mutex); + return retval; + case TIOCSERGETLSR: /* Get line status register */ + return mxser_get_lsr_info(info, argp); + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change + * - mask passed in arg for lines of interest + * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) + * Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; /* note the counters on entry */ + spin_unlock_irqrestore(&info->slock, flags); + + return wait_event_interruptible(info->port.delta_msr_wait, + mxser_cflags_changed(info, arg, &cnow)); + case MOXA_HighSpeedOn: + return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); + case MOXA_SDS_RSTICOUNTER: + spin_lock_irq(&info->slock); + info->mon_data.rxcnt = 0; + info->mon_data.txcnt = 0; + spin_unlock_irq(&info->slock); + return 0; + + case MOXA_ASPP_OQUEUE:{ + int len, lsr; + + len = mxser_chars_in_buffer(tty); + spin_lock_irq(&info->slock); + lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE; + spin_unlock_irq(&info->slock); + len += (lsr ? 0 : 1); + + return put_user(len, (int __user *)argp); + } + case MOXA_ASPP_MON: { + int mcr, status; + + spin_lock_irq(&info->slock); + status = mxser_get_msr(info->ioaddr, 1, tty->index); + mxser_check_modem_status(tty, info, status); + + mcr = inb(info->ioaddr + UART_MCR); + spin_unlock_irq(&info->slock); + + if (mcr & MOXA_MUST_MCR_XON_FLAG) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFHOLD; + + if (mcr & MOXA_MUST_MCR_TX_XON) + info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFXENT; + else + info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; + + if (tty->hw_stopped) + info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; + else + info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; + + if (copy_to_user(argp, &info->mon_data, + sizeof(struct mxser_mon))) + return -EFAULT; + + return 0; + } + case MOXA_ASPP_LSTATUS: { + if (put_user(info->err_shadow, (unsigned char __user *)argp)) + return -EFAULT; + + info->err_shadow = 0; + return 0; + } + case MOXA_SET_BAUD_METHOD: { + int method; + + if (get_user(method, (int __user *)argp)) + return -EFAULT; + mxser_set_baud_method[tty->index] = method; + return put_user(method, (int __user *)argp); + } + default: + return -ENOIOCTLCMD; + } + return 0; +} + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for + * RI where only 0->1 is counted. + */ + +static int mxser_get_icount(struct tty_struct *tty, + struct serial_icounter_struct *icount) + +{ + struct mxser_port *info = tty->driver_data; + struct async_icount cnow; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + cnow = info->icount; + spin_unlock_irqrestore(&info->slock, flags); + + icount->frame = cnow.frame; + icount->brk = cnow.brk; + icount->overrun = cnow.overrun; + icount->buf_overrun = cnow.buf_overrun; + icount->parity = cnow.parity; + icount->rx = cnow.rx; + icount->tx = cnow.tx; + icount->cts = cnow.cts; + icount->dsr = cnow.dsr; + icount->rng = cnow.rng; + icount->dcd = cnow.dcd; + return 0; +} + +static void mxser_stoprx(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + info->ldisc_stop_rx = 1; + if (I_IXOFF(tty)) { + if (info->board->chip_flag) { + info->IER &= ~MOXA_MUST_RECV_ISR; + outb(info->IER, info->ioaddr + UART_IER); + } else { + info->x_char = STOP_CHAR(tty); + outb(0, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + } + + if (tty->termios->c_cflag & CRTSCTS) { + info->MCR &= ~UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + } +} + +/* + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + */ +static void mxser_throttle(struct tty_struct *tty) +{ + mxser_stoprx(tty); +} + +static void mxser_unthrottle(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + /* startrx */ + info->ldisc_stop_rx = 0; + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else { + if (info->board->chip_flag) { + info->IER |= MOXA_MUST_RECV_ISR; + outb(info->IER, info->ioaddr + UART_IER); + } else { + info->x_char = START_CHAR(tty); + outb(0, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + } + } + + if (tty->termios->c_cflag & CRTSCTS) { + info->MCR |= UART_MCR_RTS; + outb(info->MCR, info->ioaddr + UART_MCR); + } +} + +/* + * mxser_stop() and mxser_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + */ +static void mxser_stop(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (info->IER & UART_IER_THRI) { + info->IER &= ~UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); +} + +static void mxser_start(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (info->xmit_cnt && info->port.xmit_buf) { + outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); + info->IER |= UART_IER_THRI; + outb(info->IER, info->ioaddr + UART_IER); + } + spin_unlock_irqrestore(&info->slock, flags); +} + +static void mxser_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + mxser_change_speed(tty, old_termios); + spin_unlock_irqrestore(&info->slock, flags); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + mxser_start(tty); + } + + /* Handle sw stopped */ + if ((old_termios->c_iflag & IXON) && + !(tty->termios->c_iflag & IXON)) { + tty->stopped = 0; + + if (info->board->chip_flag) { + spin_lock_irqsave(&info->slock, flags); + mxser_disable_must_rx_software_flow_control( + info->ioaddr); + spin_unlock_irqrestore(&info->slock, flags); + } + + mxser_start(tty); + } +} + +/* + * mxser_wait_until_sent() --- wait until the transmitter is empty + */ +static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) +{ + struct mxser_port *info = tty->driver_data; + unsigned long orig_jiffies, char_time; + unsigned long flags; + int lsr; + + if (info->type == PORT_UNKNOWN) + return; + + if (info->xmit_fifo_size == 0) + return; /* Just in case.... */ + + orig_jiffies = jiffies; + /* + * Set the check interval to be 1/5 of the estimated time to + * send a single character, and make it at least 1. The check + * interval should also be less than the timeout. + * + * Note: we have to use pretty tight timings here to satisfy + * the NIST-PCTS. + */ + char_time = (info->timeout - HZ / 50) / info->xmit_fifo_size; + char_time = char_time / 5; + if (char_time == 0) + char_time = 1; + if (timeout && timeout < char_time) + char_time = timeout; + /* + * If the transmitter hasn't cleared in twice the approximate + * amount of time to send the entire FIFO, it probably won't + * ever clear. This assumes the UART isn't doing flow + * control, which is currently the case. Hence, if it ever + * takes longer than info->timeout, this is probably due to a + * UART bug of some kind. So, we clamp the timeout parameter at + * 2*info->timeout. + */ + if (!timeout || timeout > 2 * info->timeout) + timeout = 2 * info->timeout; +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk(KERN_DEBUG "In rs_wait_until_sent(%d) check=%lu...", + timeout, char_time); + printk("jiff=%lu...", jiffies); +#endif + spin_lock_irqsave(&info->slock, flags); + while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...", lsr, jiffies); +#endif + spin_unlock_irqrestore(&info->slock, flags); + schedule_timeout_interruptible(char_time); + spin_lock_irqsave(&info->slock, flags); + if (signal_pending(current)) + break; + if (timeout && time_after(jiffies, orig_jiffies + timeout)) + break; + } + spin_unlock_irqrestore(&info->slock, flags); + set_current_state(TASK_RUNNING); + +#ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT + printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); +#endif +} + +/* + * This routine is called by tty_hangup() when a hangup is signaled. + */ +static void mxser_hangup(struct tty_struct *tty) +{ + struct mxser_port *info = tty->driver_data; + + mxser_flush_buffer(tty); + tty_port_hangup(&info->port); +} + +/* + * mxser_rs_break() --- routine which turns the break handling on or off + */ +static int mxser_rs_break(struct tty_struct *tty, int break_state) +{ + struct mxser_port *info = tty->driver_data; + unsigned long flags; + + spin_lock_irqsave(&info->slock, flags); + if (break_state == -1) + outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, + info->ioaddr + UART_LCR); + else + outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, + info->ioaddr + UART_LCR); + spin_unlock_irqrestore(&info->slock, flags); + return 0; +} + +static void mxser_receive_chars(struct tty_struct *tty, + struct mxser_port *port, int *status) +{ + unsigned char ch, gdl; + int ignored = 0; + int cnt = 0; + int recv_room; + int max = 256; + + recv_room = tty->receive_room; + if (recv_room == 0 && !port->ldisc_stop_rx) + mxser_stoprx(tty); + if (port->board->chip_flag != MOXA_OTHER_UART) { + + if (*status & UART_LSR_SPECIAL) + goto intr_old; + if (port->board->chip_flag == MOXA_MUST_MU860_HWID && + (*status & MOXA_MUST_LSR_RERR)) + goto intr_old; + if (*status & MOXA_MUST_LSR_RERR) + goto intr_old; + + gdl = inb(port->ioaddr + MOXA_MUST_GDL_REGISTER); + + if (port->board->chip_flag == MOXA_MUST_MU150_HWID) + gdl &= MOXA_MUST_GDL_MASK; + if (gdl >= recv_room) { + if (!port->ldisc_stop_rx) + mxser_stoprx(tty); + } + while (gdl--) { + ch = inb(port->ioaddr + UART_RX); + tty_insert_flip_char(tty, ch, 0); + cnt++; + } + goto end_intr; + } +intr_old: + + do { + if (max-- < 0) + break; + + ch = inb(port->ioaddr + UART_RX); + if (port->board->chip_flag && (*status & UART_LSR_OE)) + outb(0x23, port->ioaddr + UART_FCR); + *status &= port->read_status_mask; + if (*status & port->ignore_status_mask) { + if (++ignored > 100) + break; + } else { + char flag = 0; + if (*status & UART_LSR_SPECIAL) { + if (*status & UART_LSR_BI) { + flag = TTY_BREAK; + port->icount.brk++; + + if (port->port.flags & ASYNC_SAK) + do_SAK(tty); + } else if (*status & UART_LSR_PE) { + flag = TTY_PARITY; + port->icount.parity++; + } else if (*status & UART_LSR_FE) { + flag = TTY_FRAME; + port->icount.frame++; + } else if (*status & UART_LSR_OE) { + flag = TTY_OVERRUN; + port->icount.overrun++; + } else + flag = TTY_BREAK; + } + tty_insert_flip_char(tty, ch, flag); + cnt++; + if (cnt >= recv_room) { + if (!port->ldisc_stop_rx) + mxser_stoprx(tty); + break; + } + + } + + if (port->board->chip_flag) + break; + + *status = inb(port->ioaddr + UART_LSR); + } while (*status & UART_LSR_DR); + +end_intr: + mxvar_log.rxcnt[tty->index] += cnt; + port->mon_data.rxcnt += cnt; + port->mon_data.up_rxcnt += cnt; + + /* + * We are called from an interrupt context with &port->slock + * being held. Drop it temporarily in order to prevent + * recursive locking. + */ + spin_unlock(&port->slock); + tty_flip_buffer_push(tty); + spin_lock(&port->slock); +} + +static void mxser_transmit_chars(struct tty_struct *tty, struct mxser_port *port) +{ + int count, cnt; + + if (port->x_char) { + outb(port->x_char, port->ioaddr + UART_TX); + port->x_char = 0; + mxvar_log.txcnt[tty->index]++; + port->mon_data.txcnt++; + port->mon_data.up_txcnt++; + port->icount.tx++; + return; + } + + if (port->port.xmit_buf == NULL) + return; + + if (port->xmit_cnt <= 0 || tty->stopped || + (tty->hw_stopped && + (port->type != PORT_16550A) && + (!port->board->chip_flag))) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); + return; + } + + cnt = port->xmit_cnt; + count = port->xmit_fifo_size; + do { + outb(port->port.xmit_buf[port->xmit_tail++], + port->ioaddr + UART_TX); + port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); + if (--port->xmit_cnt <= 0) + break; + } while (--count > 0); + mxvar_log.txcnt[tty->index] += (cnt - port->xmit_cnt); + + port->mon_data.txcnt += (cnt - port->xmit_cnt); + port->mon_data.up_txcnt += (cnt - port->xmit_cnt); + port->icount.tx += (cnt - port->xmit_cnt); + + if (port->xmit_cnt < WAKEUP_CHARS) + tty_wakeup(tty); + + if (port->xmit_cnt <= 0) { + port->IER &= ~UART_IER_THRI; + outb(port->IER, port->ioaddr + UART_IER); + } +} + +/* + * This is the serial driver's generic interrupt routine + */ +static irqreturn_t mxser_interrupt(int irq, void *dev_id) +{ + int status, iir, i; + struct mxser_board *brd = NULL; + struct mxser_port *port; + int max, irqbits, bits, msr; + unsigned int int_cnt, pass_counter = 0; + int handled = IRQ_NONE; + struct tty_struct *tty; + + for (i = 0; i < MXSER_BOARDS; i++) + if (dev_id == &mxser_boards[i]) { + brd = dev_id; + break; + } + + if (i == MXSER_BOARDS) + goto irq_stop; + if (brd == NULL) + goto irq_stop; + max = brd->info->nports; + while (pass_counter++ < MXSER_ISR_PASS_LIMIT) { + irqbits = inb(brd->vector) & brd->vector_mask; + if (irqbits == brd->vector_mask) + break; + + handled = IRQ_HANDLED; + for (i = 0, bits = 1; i < max; i++, irqbits |= bits, bits <<= 1) { + if (irqbits == brd->vector_mask) + break; + if (bits & irqbits) + continue; + port = &brd->ports[i]; + + int_cnt = 0; + spin_lock(&port->slock); + do { + iir = inb(port->ioaddr + UART_IIR); + if (iir & UART_IIR_NO_INT) + break; + iir &= MOXA_MUST_IIR_MASK; + tty = tty_port_tty_get(&port->port); + if (!tty || + (port->port.flags & ASYNC_CLOSING) || + !(port->port.flags & + ASYNC_INITIALIZED)) { + status = inb(port->ioaddr + UART_LSR); + outb(0x27, port->ioaddr + UART_FCR); + inb(port->ioaddr + UART_MSR); + tty_kref_put(tty); + break; + } + + status = inb(port->ioaddr + UART_LSR); + + if (status & UART_LSR_PE) + port->err_shadow |= NPPI_NOTIFY_PARITY; + if (status & UART_LSR_FE) + port->err_shadow |= NPPI_NOTIFY_FRAMING; + if (status & UART_LSR_OE) + port->err_shadow |= + NPPI_NOTIFY_HW_OVERRUN; + if (status & UART_LSR_BI) + port->err_shadow |= NPPI_NOTIFY_BREAK; + + if (port->board->chip_flag) { + if (iir == MOXA_MUST_IIR_GDA || + iir == MOXA_MUST_IIR_RDA || + iir == MOXA_MUST_IIR_RTO || + iir == MOXA_MUST_IIR_LSR) + mxser_receive_chars(tty, port, + &status); + + } else { + status &= port->read_status_mask; + if (status & UART_LSR_DR) + mxser_receive_chars(tty, port, + &status); + } + msr = inb(port->ioaddr + UART_MSR); + if (msr & UART_MSR_ANY_DELTA) + mxser_check_modem_status(tty, port, msr); + + if (port->board->chip_flag) { + if (iir == 0x02 && (status & + UART_LSR_THRE)) + mxser_transmit_chars(tty, port); + } else { + if (status & UART_LSR_THRE) + mxser_transmit_chars(tty, port); + } + tty_kref_put(tty); + } while (int_cnt++ < MXSER_ISR_PASS_LIMIT); + spin_unlock(&port->slock); + } + } + +irq_stop: + return handled; +} + +static const struct tty_operations mxser_ops = { + .open = mxser_open, + .close = mxser_close, + .write = mxser_write, + .put_char = mxser_put_char, + .flush_chars = mxser_flush_chars, + .write_room = mxser_write_room, + .chars_in_buffer = mxser_chars_in_buffer, + .flush_buffer = mxser_flush_buffer, + .ioctl = mxser_ioctl, + .throttle = mxser_throttle, + .unthrottle = mxser_unthrottle, + .set_termios = mxser_set_termios, + .stop = mxser_stop, + .start = mxser_start, + .hangup = mxser_hangup, + .break_ctl = mxser_rs_break, + .wait_until_sent = mxser_wait_until_sent, + .tiocmget = mxser_tiocmget, + .tiocmset = mxser_tiocmset, + .get_icount = mxser_get_icount, +}; + +struct tty_port_operations mxser_port_ops = { + .carrier_raised = mxser_carrier_raised, + .dtr_rts = mxser_dtr_rts, + .activate = mxser_activate, + .shutdown = mxser_shutdown_port, +}; + +/* + * The MOXA Smartio/Industio serial driver boot-time initialization code! + */ + +static void mxser_release_ISA_res(struct mxser_board *brd) +{ + free_irq(brd->irq, brd); + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + release_region(brd->vector, 1); +} + +static int __devinit mxser_initbrd(struct mxser_board *brd, + struct pci_dev *pdev) +{ + struct mxser_port *info; + unsigned int i; + int retval; + + printk(KERN_INFO "mxser: max. baud rate = %d bps\n", + brd->ports[0].max_baud); + + for (i = 0; i < brd->info->nports; i++) { + info = &brd->ports[i]; + tty_port_init(&info->port); + info->port.ops = &mxser_port_ops; + info->board = brd; + info->stop_rx = 0; + info->ldisc_stop_rx = 0; + + /* Enhance mode enabled here */ + if (brd->chip_flag != MOXA_OTHER_UART) + mxser_enable_must_enchance_mode(info->ioaddr); + + info->port.flags = ASYNC_SHARE_IRQ; + info->type = brd->uart_type; + + process_txrx_fifo(info); + + info->custom_divisor = info->baud_base * 16; + info->port.close_delay = 5 * HZ / 10; + info->port.closing_wait = 30 * HZ; + info->normal_termios = mxvar_sdriver->init_termios; + memset(&info->mon_data, 0, sizeof(struct mxser_mon)); + info->err_shadow = 0; + spin_lock_init(&info->slock); + + /* before set INT ISR, disable all int */ + outb(inb(info->ioaddr + UART_IER) & 0xf0, + info->ioaddr + UART_IER); + } + + retval = request_irq(brd->irq, mxser_interrupt, IRQF_SHARED, "mxser", + brd); + if (retval) + printk(KERN_ERR "Board %s: Request irq failed, IRQ (%d) may " + "conflict with another device.\n", + brd->info->name, brd->irq); + + return retval; +} + +static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) +{ + int id, i, bits; + unsigned short regs[16], irq; + unsigned char scratch, scratch2; + + brd->chip_flag = MOXA_OTHER_UART; + + id = mxser_read_register(cap, regs); + switch (id) { + case C168_ASIC_ID: + brd->info = &mxser_cards[0]; + break; + case C104_ASIC_ID: + brd->info = &mxser_cards[1]; + break; + case CI104J_ASIC_ID: + brd->info = &mxser_cards[2]; + break; + case C102_ASIC_ID: + brd->info = &mxser_cards[5]; + break; + case CI132_ASIC_ID: + brd->info = &mxser_cards[6]; + break; + case CI134_ASIC_ID: + brd->info = &mxser_cards[7]; + break; + default: + return 0; + } + + irq = 0; + /* some ISA cards have 2 ports, but we want to see them as 4-port (why?) + Flag-hack checks if configuration should be read as 2-port here. */ + if (brd->info->nports == 2 || (brd->info->flags & MXSER_HAS2)) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + if (irq != (regs[9] & 0xFF00)) + goto err_irqconflict; + } else if (brd->info->nports == 4) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + irq = irq | (irq >> 8); + if (irq != regs[9]) + goto err_irqconflict; + } else if (brd->info->nports == 8) { + irq = regs[9] & 0xF000; + irq = irq | (irq >> 4); + irq = irq | (irq >> 8); + if ((irq != regs[9]) || (irq != regs[10])) + goto err_irqconflict; + } + + if (!irq) { + printk(KERN_ERR "mxser: interrupt number unset\n"); + return -EIO; + } + brd->irq = ((int)(irq & 0xF000) >> 12); + for (i = 0; i < 8; i++) + brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; + if ((regs[12] & 0x80) == 0) { + printk(KERN_ERR "mxser: invalid interrupt vector\n"); + return -EIO; + } + brd->vector = (int)regs[11]; /* interrupt vector */ + if (id == 1) + brd->vector_mask = 0x00FF; + else + brd->vector_mask = 0x000F; + for (i = 7, bits = 0x0100; i >= 0; i--, bits <<= 1) { + if (regs[12] & bits) { + brd->ports[i].baud_base = 921600; + brd->ports[i].max_baud = 921600; + } else { + brd->ports[i].baud_base = 115200; + brd->ports[i].max_baud = 115200; + } + } + scratch2 = inb(cap + UART_LCR) & (~UART_LCR_DLAB); + outb(scratch2 | UART_LCR_DLAB, cap + UART_LCR); + outb(0, cap + UART_EFR); /* EFR is the same as FCR */ + outb(scratch2, cap + UART_LCR); + outb(UART_FCR_ENABLE_FIFO, cap + UART_FCR); + scratch = inb(cap + UART_IIR); + + if (scratch & 0xC0) + brd->uart_type = PORT_16550A; + else + brd->uart_type = PORT_16450; + if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, + "mxser(IO)")) { + printk(KERN_ERR "mxser: can't request ports I/O region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; + } + if (!request_region(brd->vector, 1, "mxser(vector)")) { + release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); + printk(KERN_ERR "mxser: can't request interrupt vector region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; + } + return brd->info->nports; + +err_irqconflict: + printk(KERN_ERR "mxser: invalid interrupt number\n"); + return -EIO; +} + +static int __devinit mxser_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ +#ifdef CONFIG_PCI + struct mxser_board *brd; + unsigned int i, j; + unsigned long ioaddress; + int retval = -EINVAL; + + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info == NULL) + break; + + if (i >= MXSER_BOARDS) { + dev_err(&pdev->dev, "too many boards found (maximum %d), board " + "not configured\n", MXSER_BOARDS); + goto err; + } + + brd = &mxser_boards[i]; + brd->idx = i * MXSER_PORTS_PER_BOARD; + dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n", + mxser_cards[ent->driver_data].name, + pdev->bus->number, PCI_SLOT(pdev->devfn)); + + retval = pci_enable_device(pdev); + if (retval) { + dev_err(&pdev->dev, "PCI enable failed\n"); + goto err; + } + + /* io address */ + ioaddress = pci_resource_start(pdev, 2); + retval = pci_request_region(pdev, 2, "mxser(IO)"); + if (retval) + goto err_dis; + + brd->info = &mxser_cards[ent->driver_data]; + for (i = 0; i < brd->info->nports; i++) + brd->ports[i].ioaddr = ioaddress + 8 * i; + + /* vector */ + ioaddress = pci_resource_start(pdev, 3); + retval = pci_request_region(pdev, 3, "mxser(vector)"); + if (retval) + goto err_zero; + brd->vector = ioaddress; + + /* irq */ + brd->irq = pdev->irq; + + brd->chip_flag = CheckIsMoxaMust(brd->ports[0].ioaddr); + brd->uart_type = PORT_16550A; + brd->vector_mask = 0; + + for (i = 0; i < brd->info->nports; i++) { + for (j = 0; j < UART_INFO_NUM; j++) { + if (Gpci_uart_info[j].type == brd->chip_flag) { + brd->ports[i].max_baud = + Gpci_uart_info[j].max_baud; + + /* exception....CP-102 */ + if (brd->info->flags & MXSER_HIGHBAUD) + brd->ports[i].max_baud = 921600; + break; + } + } + } + + if (brd->chip_flag == MOXA_MUST_MU860_HWID) { + for (i = 0; i < brd->info->nports; i++) { + if (i < 4) + brd->ports[i].opmode_ioaddr = ioaddress + 4; + else + brd->ports[i].opmode_ioaddr = ioaddress + 0x0c; + } + outb(0, ioaddress + 4); /* default set to RS232 mode */ + outb(0, ioaddress + 0x0c); /* default set to RS232 mode */ + } + + for (i = 0; i < brd->info->nports; i++) { + brd->vector_mask |= (1 << i); + brd->ports[i].baud_base = 921600; + } + + /* mxser_initbrd will hook ISR. */ + retval = mxser_initbrd(brd, pdev); + if (retval) + goto err_rel3; + + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, &pdev->dev); + + pci_set_drvdata(pdev, brd); + + return 0; +err_rel3: + pci_release_region(pdev, 3); +err_zero: + brd->info = NULL; + pci_release_region(pdev, 2); +err_dis: + pci_disable_device(pdev); +err: + return retval; +#else + return -ENODEV; +#endif +} + +static void __devexit mxser_remove(struct pci_dev *pdev) +{ +#ifdef CONFIG_PCI + struct mxser_board *brd = pci_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < brd->info->nports; i++) + tty_unregister_device(mxvar_sdriver, brd->idx + i); + + free_irq(pdev->irq, brd); + pci_release_region(pdev, 2); + pci_release_region(pdev, 3); + pci_disable_device(pdev); + brd->info = NULL; +#endif +} + +static struct pci_driver mxser_driver = { + .name = "mxser", + .id_table = mxser_pcibrds, + .probe = mxser_probe, + .remove = __devexit_p(mxser_remove) +}; + +static int __init mxser_module_init(void) +{ + struct mxser_board *brd; + unsigned int b, i, m; + int retval; + + mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); + if (!mxvar_sdriver) + return -ENOMEM; + + printk(KERN_INFO "MOXA Smartio/Industio family driver version %s\n", + MXSER_VERSION); + + /* Initialize the tty_driver structure */ + mxvar_sdriver->owner = THIS_MODULE; + mxvar_sdriver->magic = TTY_DRIVER_MAGIC; + mxvar_sdriver->name = "ttyMI"; + mxvar_sdriver->major = ttymajor; + mxvar_sdriver->minor_start = 0; + mxvar_sdriver->num = MXSER_PORTS + 1; + mxvar_sdriver->type = TTY_DRIVER_TYPE_SERIAL; + mxvar_sdriver->subtype = SERIAL_TYPE_NORMAL; + mxvar_sdriver->init_termios = tty_std_termios; + mxvar_sdriver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + mxvar_sdriver->flags = TTY_DRIVER_REAL_RAW|TTY_DRIVER_DYNAMIC_DEV; + tty_set_operations(mxvar_sdriver, &mxser_ops); + + retval = tty_register_driver(mxvar_sdriver); + if (retval) { + printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family " + "tty driver !\n"); + goto err_put; + } + + /* Start finding ISA boards here */ + for (m = 0, b = 0; b < MXSER_BOARDS; b++) { + if (!ioaddr[b]) + continue; + + brd = &mxser_boards[m]; + retval = mxser_get_ISA_conf(ioaddr[b], brd); + if (retval <= 0) { + brd->info = NULL; + continue; + } + + printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n", + brd->info->name, ioaddr[b]); + + /* mxser_initbrd will hook ISR. */ + if (mxser_initbrd(brd, NULL) < 0) { + brd->info = NULL; + continue; + } + + brd->idx = m * MXSER_PORTS_PER_BOARD; + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, NULL); + + m++; + } + + retval = pci_register_driver(&mxser_driver); + if (retval) { + printk(KERN_ERR "mxser: can't register pci driver\n"); + if (!m) { + retval = -ENODEV; + goto err_unr; + } /* else: we have some ISA cards under control */ + } + + return 0; +err_unr: + tty_unregister_driver(mxvar_sdriver); +err_put: + put_tty_driver(mxvar_sdriver); + return retval; +} + +static void __exit mxser_module_exit(void) +{ + unsigned int i, j; + + pci_unregister_driver(&mxser_driver); + + for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ + if (mxser_boards[i].info != NULL) + for (j = 0; j < mxser_boards[i].info->nports; j++) + tty_unregister_device(mxvar_sdriver, + mxser_boards[i].idx + j); + tty_unregister_driver(mxvar_sdriver); + put_tty_driver(mxvar_sdriver); + + for (i = 0; i < MXSER_BOARDS; i++) + if (mxser_boards[i].info != NULL) + mxser_release_ISA_res(&mxser_boards[i]); +} + +module_init(mxser_module_init); +module_exit(mxser_module_exit); |