1 files changed, 19 insertions, 52 deletions

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index e2774f9ecd59..aaa22867e656 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -79,13 +79,12 @@ struct vendor_data {
 	bool			dma_threshold;
 	bool			cts_event_workaround;
 
-	unsigned int (*get_fifosize)(unsigned int periphid);
+	unsigned int (*get_fifosize)(struct amba_device *dev);
 };
 
-static unsigned int get_fifosize_arm(unsigned int periphid)
+static unsigned int get_fifosize_arm(struct amba_device *dev)
 {
-	unsigned int rev = (periphid >> 20) & 0xf;
-	return rev < 3 ? 16 : 32;
+	return amba_rev(dev) < 3 ? 16 : 32;
 }
 
 static struct vendor_data vendor_arm = {
@@ -98,7 +97,7 @@ static struct vendor_data vendor_arm = {
 	.get_fifosize		= get_fifosize_arm,
 };
 
-static unsigned int get_fifosize_st(unsigned int periphid)
+static unsigned int get_fifosize_st(struct amba_device *dev)
 {
 	return 64;
 }
@@ -151,10 +150,6 @@ struct pl011_dmatx_data {
 struct uart_amba_port {
 	struct uart_port	port;
 	struct clk		*clk;
-	/* Two optional pin states - default & sleep */
-	struct pinctrl		*pinctrl;
-	struct pinctrl_state	*pins_default;
-	struct pinctrl_state	*pins_sleep;
 	const struct vendor_data *vendor;
 	unsigned int		dmacr;		/* dma control reg */
 	unsigned int		im;		/* interrupt mask */
@@ -270,7 +265,7 @@ static void pl011_sgbuf_free(struct dma_chan *chan, struct pl011_sgbuf *sg,
 static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port *uap)
 {
 	/* DMA is the sole user of the platform data right now */
-	struct amba_pl011_data *plat = uap->port.dev->platform_data;
+	struct amba_pl011_data *plat = dev_get_platdata(uap->port.dev);
 	struct dma_slave_config tx_conf = {
 		.dst_addr = uap->port.mapbase + UART01x_DR,
 		.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
@@ -682,6 +677,8 @@ static inline bool pl011_dma_tx_start(struct uart_amba_port *uap)
  * Locking: called with port lock held and IRQs disabled.
  */
 static void pl011_dma_flush_buffer(struct uart_port *port)
+__releases(&uap->port.lock)
+__acquires(&uap->port.lock)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 
@@ -1203,6 +1200,8 @@ static void pl011_enable_ms(struct uart_port *port)
 }
 
 static void pl011_rx_chars(struct uart_amba_port *uap)
+__releases(&uap->port.lock)
+__acquires(&uap->port.lock)
 {
 	pl011_fifo_to_tty(uap);
 
@@ -1480,12 +1479,7 @@ static int pl011_hwinit(struct uart_port *port)
 	int retval;
 
 	/* Optionaly enable pins to be muxed in and configured */
-	if (!IS_ERR(uap->pins_default)) {
-		retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
-		if (retval)
-			dev_err(port->dev,
-				"could not set default pins\n");
-	}
+	pinctrl_pm_select_default_state(port->dev);
 
 	/*
 	 * Try to enable the clock producer.
@@ -1507,10 +1501,10 @@ static int pl011_hwinit(struct uart_port *port)
 	uap->im = readw(uap->port.membase + UART011_IMSC);
 	writew(UART011_RTIM | UART011_RXIM, uap->port.membase + UART011_IMSC);
 
-	if (uap->port.dev->platform_data) {
+	if (dev_get_platdata(uap->port.dev)) {
 		struct amba_pl011_data *plat;
 
-		plat = uap->port.dev->platform_data;
+		plat = dev_get_platdata(uap->port.dev);
 		if (plat->init)
 			plat->init();
 	}
@@ -1611,7 +1605,6 @@ static void pl011_shutdown(struct uart_port *port)
 {
 	struct uart_amba_port *uap = (struct uart_amba_port *)port;
 	unsigned int cr;
-	int retval;
 
 	/*
 	 * disable all interrupts
@@ -1654,18 +1647,12 @@ static void pl011_shutdown(struct uart_port *port)
 	 */
 	clk_disable_unprepare(uap->clk);
 	/* Optionally let pins go into sleep states */
-	if (!IS_ERR(uap->pins_sleep)) {
-		retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
-		if (retval)
-			dev_err(port->dev,
-				"could not set pins to sleep state\n");
-	}
+	pinctrl_pm_select_sleep_state(port->dev);
 
-
-	if (uap->port.dev->platform_data) {
+	if (dev_get_platdata(uap->port.dev)) {
 		struct amba_pl011_data *plat;
 
-		plat = uap->port.dev->platform_data;
+		plat = dev_get_platdata(uap->port.dev);
 		if (plat->exit)
 			plat->exit();
 	}
@@ -2013,21 +2000,16 @@ static int __init pl011_console_setup(struct console *co, char *options)
 		return -ENODEV;
 
 	/* Allow pins to be muxed in and configured */
-	if (!IS_ERR(uap->pins_default)) {
-		ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
-		if (ret)
-			dev_err(uap->port.dev,
-				"could not set default pins\n");
-	}
+	pinctrl_pm_select_default_state(uap->port.dev);
 
 	ret = clk_prepare(uap->clk);
 	if (ret)
 		return ret;
 
-	if (uap->port.dev->platform_data) {
+	if (dev_get_platdata(uap->port.dev)) {
 		struct amba_pl011_data *plat;
 
-		plat = uap->port.dev->platform_data;
+		plat = dev_get_platdata(uap->port.dev);
 		if (plat->init)
 			plat->init();
 	}
@@ -2132,21 +2114,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 		goto out;
 	}
 
-	uap->pinctrl = devm_pinctrl_get(&dev->dev);
-	if (IS_ERR(uap->pinctrl)) {
-		ret = PTR_ERR(uap->pinctrl);
-		goto out;
-	}
-	uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
-						 PINCTRL_STATE_DEFAULT);
-	if (IS_ERR(uap->pins_default))
-		dev_err(&dev->dev, "could not get default pinstate\n");
-
-	uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
-					       PINCTRL_STATE_SLEEP);
-	if (IS_ERR(uap->pins_sleep))
-		dev_dbg(&dev->dev, "could not get sleep pinstate\n");
-
 	uap->clk = devm_clk_get(&dev->dev, NULL);
 	if (IS_ERR(uap->clk)) {
 		ret = PTR_ERR(uap->clk);
@@ -2157,7 +2124,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
 	uap->lcrh_rx = vendor->lcrh_rx;
 	uap->lcrh_tx = vendor->lcrh_tx;
 	uap->old_cr = 0;
-	uap->fifosize = vendor->get_fifosize(dev->periphid);
+	uap->fifosize = vendor->get_fifosize(dev);
 	uap->port.dev = &dev->dev;
 	uap->port.mapbase = dev->res.start;
 	uap->port.membase = base;