summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250_lpss.c2
-rw-r--r--drivers/tty/serial/8250/8250_port.c3
-rw-r--r--drivers/tty/serial/8250/8250_uniphier.c4
-rw-r--r--drivers/tty/serial/Kconfig1
-rw-r--r--drivers/tty/serial/atmel_serial.c26
-rw-r--r--drivers/tty/serial/fsl_lpuart.c3
-rw-r--r--drivers/tty/serial/pch_uart.c1
-rw-r--r--drivers/tty/serial/sc16is7xx.c8
-rw-r--r--drivers/tty/serial/serial_core.c8
-rw-r--r--drivers/tty/serial/stm32-usart.h2
-rw-r--r--drivers/tty/serial/xilinx_uartps.c2
11 files changed, 43 insertions, 17 deletions
diff --git a/drivers/tty/serial/8250/8250_lpss.c b/drivers/tty/serial/8250/8250_lpss.c
index 886fcf37f291..b9923464599f 100644
--- a/drivers/tty/serial/8250/8250_lpss.c
+++ b/drivers/tty/serial/8250/8250_lpss.c
@@ -213,7 +213,7 @@ static int qrk_serial_setup(struct lpss8250 *lpss, struct uart_port *port)
struct pci_dev *pdev = to_pci_dev(port->dev);
int ret;
- ret = pci_alloc_irq_vectors(pdev, 1, 1, 0);
+ ret = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_ALL_TYPES);
if (ret < 0)
return ret;
diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
index 1bfb6fdbaa20..1731b98d2471 100644
--- a/drivers/tty/serial/8250/8250_port.c
+++ b/drivers/tty/serial/8250/8250_port.c
@@ -83,7 +83,8 @@ static const struct serial8250_config uart_config[] = {
.name = "16550A",
.fifo_size = 16,
.tx_loadsz = 16,
- .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
+ .fcr = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10 |
+ UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT,
.rxtrig_bytes = {1, 4, 8, 14},
.flags = UART_CAP_FIFO,
},
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index b8d9c8c9d02a..417d9e7038e1 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -99,7 +99,7 @@ static void uniphier_serial_out(struct uart_port *p, int offset, int value)
case UART_LCR:
valshift = UNIPHIER_UART_LCR_SHIFT;
/* Divisor latch access bit does not exist. */
- value &= ~(UART_LCR_DLAB << valshift);
+ value &= ~UART_LCR_DLAB;
/* fall through */
case UART_MCR:
offset = UNIPHIER_UART_LCR_MCR;
@@ -199,7 +199,7 @@ static int uniphier_uart_probe(struct platform_device *pdev)
regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!regs) {
- dev_err(dev, "failed to get memory resource");
+ dev_err(dev, "failed to get memory resource\n");
return -EINVAL;
}
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index c7831407a882..25c1d7bc0100 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1625,6 +1625,7 @@ config SERIAL_SPRD_CONSOLE
config SERIAL_STM32
tristate "STMicroelectronics STM32 serial port support"
select SERIAL_CORE
+ depends on HAS_DMA
depends on ARM || COMPILE_TEST
help
This driver is for the on-chip Serial Controller on
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index fd8aa1f4ba78..168b10cad47b 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -2132,11 +2132,29 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
mode |= ATMEL_US_USMODE_RS485;
} else if (termios->c_cflag & CRTSCTS) {
/* RS232 with hardware handshake (RTS/CTS) */
- if (atmel_use_dma_rx(port) && !atmel_use_fifo(port)) {
- dev_info(port->dev, "not enabling hardware flow control because DMA is used");
- termios->c_cflag &= ~CRTSCTS;
- } else {
+ if (atmel_use_fifo(port) &&
+ !mctrl_gpio_to_gpiod(atmel_port->gpios, UART_GPIO_CTS)) {
+ /*
+ * with ATMEL_US_USMODE_HWHS set, the controller will
+ * be able to drive the RTS pin high/low when the RX
+ * FIFO is above RXFTHRES/below RXFTHRES2.
+ * It will also disable the transmitter when the CTS
+ * pin is high.
+ * This mode is not activated if CTS pin is a GPIO
+ * because in this case, the transmitter is always
+ * disabled (there must be an internal pull-up
+ * responsible for this behaviour).
+ * If the RTS pin is a GPIO, the controller won't be
+ * able to drive it according to the FIFO thresholds,
+ * but it will be handled by the driver.
+ */
mode |= ATMEL_US_USMODE_HWHS;
+ } else {
+ /*
+ * For platforms without FIFO, the flow control is
+ * handled by the driver.
+ */
+ mode |= ATMEL_US_USMODE_NORMAL;
}
} else {
/* RS232 without hadware handshake */
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index de9d5107c00a..76103f2c4a80 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -328,7 +328,7 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
sport->dma_tx_bytes = uart_circ_chars_pending(xmit);
- if (xmit->tail < xmit->head) {
+ if (xmit->tail < xmit->head || xmit->head == 0) {
sport->dma_tx_nents = 1;
sg_init_one(sgl, xmit->buf + xmit->tail, sport->dma_tx_bytes);
} else {
@@ -359,7 +359,6 @@ static void lpuart_dma_tx(struct lpuart_port *sport)
sport->dma_tx_in_progress = true;
sport->dma_tx_cookie = dmaengine_submit(sport->dma_tx_desc);
dma_async_issue_pending(sport->dma_tx_chan);
-
}
static void lpuart_dma_tx_complete(void *arg)
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index d391650b82e7..42caccb5e87e 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -419,6 +419,7 @@ static struct dmi_system_id pch_uart_dmi_table[] = {
},
(void *)MINNOW_UARTCLK,
},
+ { }
};
/* Return UART clock, checking for board specific clocks. */
diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 2675792a8f59..fb0672554123 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1130,9 +1130,13 @@ static int sc16is7xx_gpio_direction_output(struct gpio_chip *chip,
{
struct sc16is7xx_port *s = gpiochip_get_data(chip);
struct uart_port *port = &s->p[0].port;
+ u8 state = sc16is7xx_port_read(port, SC16IS7XX_IOSTATE_REG);
- sc16is7xx_port_update(port, SC16IS7XX_IOSTATE_REG, BIT(offset),
- val ? BIT(offset) : 0);
+ if (val)
+ state |= BIT(offset);
+ else
+ state &= ~BIT(offset);
+ sc16is7xx_port_write(port, SC16IS7XX_IOSTATE_REG, state);
sc16is7xx_port_update(port, SC16IS7XX_IODIR_REG, BIT(offset),
BIT(offset));
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 6e4f63627479..f2303f390345 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -111,7 +111,7 @@ void uart_write_wakeup(struct uart_port *port)
* closed. No cookie for you.
*/
BUG_ON(!state);
- tty_wakeup(state->port.tty);
+ tty_port_tty_wakeup(&state->port);
}
static void uart_stop(struct tty_struct *tty)
@@ -632,7 +632,7 @@ static void uart_flush_buffer(struct tty_struct *tty)
if (port->ops->flush_buffer)
port->ops->flush_buffer(port);
uart_port_unlock(port, flags);
- tty_wakeup(tty);
+ tty_port_tty_wakeup(&state->port);
}
/*
@@ -2746,8 +2746,6 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
uport->cons = drv->cons;
uport->minor = drv->tty_driver->minor_start + uport->line;
- port->console = uart_console(uport);
-
/*
* If this port is a console, then the spinlock is already
* initialised.
@@ -2761,6 +2759,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
uart_configure_port(drv, state, uport);
+ port->console = uart_console(uport);
+
num_groups = 2;
if (uport->attr_group)
num_groups++;
diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index 41d974923102..cd97ceb76e4f 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -31,7 +31,7 @@ struct stm32_usart_info {
struct stm32_usart_config cfg;
};
-#define UNDEF_REG ~0
+#define UNDEF_REG 0xff
/* Register offsets */
struct stm32_usart_info stm32f4_info = {
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index f37edaa5ac75..dd4c02fa4820 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1200,6 +1200,7 @@ static int __init cdns_early_console_setup(struct earlycon_device *device,
OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup);
OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
+OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
/**
* cdns_uart_console_write - perform write operation
@@ -1438,6 +1439,7 @@ static const struct of_device_id cdns_uart_of_match[] = {
{ .compatible = "xlnx,xuartps", },
{ .compatible = "cdns,uart-r1p8", },
{ .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def },
+ { .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def },
{}
};
MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-09 19:00:54 +0000