summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250.c12
-rw-r--r--drivers/tty/serial/8250/8250_pci.c16
-rw-r--r--drivers/tty/serial/Kconfig2
-rw-r--r--drivers/tty/serial/altera_uart.c4
-rw-r--r--drivers/tty/serial/amba-pl011.c8
-rw-r--r--drivers/tty/serial/atmel_serial.c4
-rw-r--r--drivers/tty/serial/omap-serial.c43
-rw-r--r--drivers/tty/serial/pch_uart.c8
-rw-r--r--drivers/tty/serial/samsung.c1
9 files changed, 47 insertions, 51 deletions
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index df14cac236c7..ff9c051ca980 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -1582,13 +1582,11 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id)
do {
struct uart_8250_port *up;
struct uart_port *port;
- bool skip;
up = list_entry(l, struct uart_8250_port, list);
port = &up->port;
- skip = pass_counter && up->port.flags & UPF_IIR_ONCE;
- if (!skip && port->handle_irq(port)) {
+ if (port->handle_irq(port)) {
handled = 1;
end = NULL;
} else if (end == NULL)
@@ -2047,10 +2045,12 @@ static int serial8250_startup(struct uart_port *port)
spin_unlock_irqrestore(&port->lock, flags);
/*
- * If the interrupt is not reasserted, setup a timer to
- * kick the UART on a regular basis.
+ * If the interrupt is not reasserted, or we otherwise
+ * don't trust the iir, setup a timer to kick the UART
+ * on a regular basis.
*/
- if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) {
+ if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
+ up->port.flags & UPF_BUG_THRE) {
up->bugs |= UART_BUG_THRE;
pr_debug("ttyS%d - using backup timer\n",
serial_index(port));
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index da2b0b0a183f..858dca865d6a 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1096,7 +1096,7 @@ static int kt_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
struct uart_port *port, int idx)
{
- port->flags |= UPF_IIR_ONCE;
+ port->flags |= UPF_BUG_THRE;
return skip_tx_en_setup(priv, board, port, idx);
}
@@ -1118,18 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv,
return pci_default_setup(priv, board, port, idx);
}
-static int try_enable_msi(struct pci_dev *dev)
-{
- /* use msi if available, but fallback to legacy otherwise */
- pci_enable_msi(dev);
- return 0;
-}
-
-static void disable_msi(struct pci_dev *dev)
-{
- pci_disable_msi(dev);
-}
-
#define PCI_VENDOR_ID_SBSMODULARIO 0x124B
#define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B
#define PCI_DEVICE_ID_OCTPRO 0x0001
@@ -1249,9 +1237,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.device = PCI_DEVICE_ID_INTEL_PATSBURG_KT,
.subvendor = PCI_ANY_ID,
.subdevice = PCI_ANY_ID,
- .init = try_enable_msi,
.setup = kt_serial_setup,
- .exit = disable_msi,
},
/*
* ITE
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 665beb68f670..070b442c1f81 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1041,7 +1041,7 @@ config SERIAL_OMAP
config SERIAL_OMAP_CONSOLE
bool "Console on OMAP serial port"
- depends on SERIAL_OMAP
+ depends on SERIAL_OMAP=y
select SERIAL_CORE_CONSOLE
help
Select this option if you would like to use omap serial port as
diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c
index e7903751e058..1f0330915d5a 100644
--- a/drivers/tty/serial/altera_uart.c
+++ b/drivers/tty/serial/altera_uart.c
@@ -556,7 +556,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (res_mem)
port->mapbase = res_mem->start;
- else if (platp->mapbase)
+ else if (platp)
port->mapbase = platp->mapbase;
else
return -EINVAL;
@@ -564,7 +564,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev)
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (res_irq)
port->irq = res_irq->start;
- else if (platp->irq)
+ else if (platp)
port->irq = platp->irq;
/* Check platform data first so we can override device node data */
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 0c65c9e66986..3d569cd68f58 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1946,10 +1946,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
goto unmap;
}
- /* Ensure interrupts from this UART are masked and cleared */
- writew(0, uap->port.membase + UART011_IMSC);
- writew(0xffff, uap->port.membase + UART011_ICR);
-
uap->vendor = vendor;
uap->lcrh_rx = vendor->lcrh_rx;
uap->lcrh_tx = vendor->lcrh_tx;
@@ -1967,6 +1963,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id)
uap->port.line = i;
pl011_dma_probe(uap);
+ /* Ensure interrupts from this UART are masked and cleared */
+ writew(0, uap->port.membase + UART011_IMSC);
+ writew(0xffff, uap->port.membase + UART011_ICR);
+
snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev));
amba_ports[i] = uap;
diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index f9a6be7a9bed..3d7e1ee2fa57 100644
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -389,6 +389,8 @@ static void atmel_start_rx(struct uart_port *port)
{
UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
+ UART_PUT_CR(port, ATMEL_US_RXEN);
+
if (atmel_use_dma_rx(port)) {
/* enable PDC controller */
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
@@ -404,6 +406,8 @@ static void atmel_start_rx(struct uart_port *port)
*/
static void atmel_stop_rx(struct uart_port *port)
{
+ UART_PUT_CR(port, ATMEL_US_RXDIS);
+
if (atmel_use_dma_rx(port)) {
/* disable PDC receive */
UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index d4b09fbeabeb..f6974929c5bb 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -1377,29 +1377,24 @@ static int serial_omap_probe(struct platform_device *pdev)
return -ENODEV;
}
- if (!request_mem_region(mem->start, resource_size(mem),
+ if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem),
pdev->dev.driver->name)) {
dev_err(&pdev->dev, "memory region already claimed\n");
return -EBUSY;
}
dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx");
- if (!dma_rx) {
- ret = -EINVAL;
- goto err;
- }
+ if (!dma_rx)
+ return -ENXIO;
dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx");
- if (!dma_tx) {
- ret = -EINVAL;
- goto err;
- }
+ if (!dma_tx)
+ return -ENXIO;
+
+ up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL);
+ if (!up)
+ return -ENOMEM;
- up = kzalloc(sizeof(*up), GFP_KERNEL);
- if (up == NULL) {
- ret = -ENOMEM;
- goto do_release_region;
- }
up->pdev = pdev;
up->port.dev = &pdev->dev;
up->port.type = PORT_OMAP;
@@ -1419,16 +1414,17 @@ static int serial_omap_probe(struct platform_device *pdev)
dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n",
up->port.line);
ret = -ENODEV;
- goto err;
+ goto err_port_line;
}
sprintf(up->name, "OMAP UART%d", up->port.line);
up->port.mapbase = mem->start;
- up->port.membase = ioremap(mem->start, resource_size(mem));
+ up->port.membase = devm_ioremap(&pdev->dev, mem->start,
+ resource_size(mem));
if (!up->port.membase) {
dev_err(&pdev->dev, "can't ioremap UART\n");
ret = -ENOMEM;
- goto err;
+ goto err_ioremap;
}
up->port.flags = omap_up_info->flags;
@@ -1474,16 +1470,19 @@ static int serial_omap_probe(struct platform_device *pdev)
ret = uart_add_one_port(&serial_omap_reg, &up->port);
if (ret != 0)
- goto do_release_region;
+ goto err_add_port;
pm_runtime_put(&pdev->dev);
platform_set_drvdata(pdev, up);
return 0;
-err:
+
+err_add_port:
+ pm_runtime_put(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+err_ioremap:
+err_port_line:
dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n",
pdev->id, __func__, ret);
-do_release_region:
- release_mem_region(mem->start, resource_size(mem));
return ret;
}
@@ -1495,8 +1494,6 @@ static int serial_omap_remove(struct platform_device *dev)
pm_runtime_disable(&up->pdev->dev);
uart_remove_one_port(&serial_omap_reg, &up->port);
pm_qos_remove_request(&up->pm_qos_request);
-
- kfree(up);
}
platform_set_drvdata(dev, NULL);
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 08b9962b8fda..bbbec4a74cfb 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -210,6 +210,7 @@ enum {
#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */
#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */
#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */
+#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */
struct pch_uart_buffer {
unsigned char *buf;
@@ -384,6 +385,12 @@ static int pch_uart_get_uartclk(void)
if (cmp && strstr(cmp, "Fish River Island II"))
return FRI2_48_UARTCLK;
+ /* Kontron COMe-mTT10 (nanoETXexpress-TT) */
+ cmp = dmi_get_system_info(DMI_BOARD_NAME);
+ if (cmp && (strstr(cmp, "COMe-mTT") ||
+ strstr(cmp, "nanoETXexpress-TT")))
+ return NTC1_UARTCLK;
+
return DEFAULT_UARTCLK;
}
@@ -1651,6 +1658,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev,
}
pci_enable_msi(pdev);
+ pci_set_master(pdev);
iobase = pci_resource_start(pdev, 0);
mapbase = pci_resource_start(pdev, 1);
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index de249d265bec..d8b0aee35632 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -982,6 +982,7 @@ static void s3c24xx_serial_resetport(struct uart_port *port,
ucon &= ucon_mask;
wr_regl(port, S3C2410_UCON, ucon | cfg->ucon);
+ wr_regl(port, S3C2410_ULCON, cfg->ulcon);
/* reset both fifos */
wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH);
generated by cgit v1.2.3 (git 2.0.4) at 2024-12-28 17:29:34 +0000