summaryrefslogtreecommitdiff
path: root/drivers/tty/serial
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/tty/serial')
-rw-r--r--drivers/tty/serial/8250/8250_mtk.c16
-rw-r--r--drivers/tty/serial/8250/8250_of.c4
-rw-r--r--drivers/tty/serial/8250/8250_pci.c175
-rw-r--r--drivers/tty/serial/amba-pl011.c2
-rw-r--r--drivers/tty/serial/fsl_lpuart.c4
-rw-r--r--drivers/tty/serial/kgdboc.c4
-rw-r--r--drivers/tty/serial/pic32_uart.c1
-rw-r--r--drivers/tty/serial/samsung.c3
-rw-r--r--drivers/tty/serial/serial_core.c40
-rw-r--r--drivers/tty/serial/sprd_serial.c6
-rw-r--r--drivers/tty/serial/suncore.c1
-rw-r--r--drivers/tty/serial/sunsu.c31
-rw-r--r--drivers/tty/serial/xilinx_uartps.c11
13 files changed, 250 insertions, 48 deletions
diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c
index ce0cc471bfc3..91db9ca1c6c9 100644
--- a/drivers/tty/serial/8250/8250_mtk.c
+++ b/drivers/tty/serial/8250/8250_mtk.c
@@ -225,17 +225,17 @@ static int mtk8250_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, data);
- pm_runtime_enable(&pdev->dev);
- if (!pm_runtime_enabled(&pdev->dev)) {
- err = mtk8250_runtime_resume(&pdev->dev);
- if (err)
- return err;
- }
+ err = mtk8250_runtime_resume(&pdev->dev);
+ if (err)
+ return err;
data->line = serial8250_register_8250_port(&uart);
if (data->line < 0)
return data->line;
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
return 0;
}
@@ -246,13 +246,11 @@ static int mtk8250_remove(struct platform_device *pdev)
pm_runtime_get_sync(&pdev->dev);
serial8250_unregister_port(data->line);
+ mtk8250_runtime_suspend(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pm_runtime_put_noidle(&pdev->dev);
- if (!pm_runtime_status_suspended(&pdev->dev))
- mtk8250_runtime_suspend(&pdev->dev);
-
return 0;
}
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 7a8b5fc81a19..f89dfde934a3 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -97,6 +97,10 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
if (of_property_read_u32(np, "reg-offset", &prop) == 0)
port->mapbase += prop;
+ /* Compatibility with the deprecated pxa driver and 8250_pxa drivers. */
+ if (of_device_is_compatible(np, "mrvl,mmp-uart"))
+ port->regshift = 2;
+
/* Check for registers offset within the devices address range */
if (of_property_read_u32(np, "reg-shift", &prop) == 0)
port->regshift = prop;
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index e82b3473b6b8..2c38b3a1d518 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -1330,6 +1330,30 @@ static int pci_default_setup(struct serial_private *priv,
return setup_port(priv, port, bar, offset, board->reg_shift);
}
+static int pci_pericom_setup(struct serial_private *priv,
+ const struct pciserial_board *board,
+ struct uart_8250_port *port, int idx)
+{
+ unsigned int bar, offset = board->first_offset, maxnr;
+
+ bar = FL_GET_BASE(board->flags);
+ if (board->flags & FL_BASE_BARS)
+ bar += idx;
+ else
+ offset += idx * board->uart_offset;
+
+ if (idx==3)
+ offset = 0x38;
+
+ maxnr = (pci_resource_len(priv->dev, bar) - board->first_offset) >>
+ (board->reg_shift + 3);
+
+ if (board->flags & FL_REGION_SZ_CAP && idx >= maxnr)
+ return 1;
+
+ return setup_port(priv, port, bar, offset, board->reg_shift);
+}
+
static int
ce4100_serial_setup(struct serial_private *priv,
const struct pciserial_board *board,
@@ -2097,6 +2121,16 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.exit = pci_plx9050_exit,
},
/*
+ * Pericom (Only 7954 - It have a offset jump for port 4)
+ */
+ {
+ .vendor = PCI_VENDOR_ID_PERICOM,
+ .device = PCI_DEVICE_ID_PERICOM_PI7C9X7954,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ /*
* PLX
*/
{
@@ -2126,6 +2160,111 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = {
.setup = pci_default_setup,
.exit = pci_plx9050_exit,
},
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4S,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_ACCESIO,
+ .device = PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .setup = pci_pericom_setup,
+ },
/*
* SBS Technologies, Inc., PMC-OCTALPRO 232
*/
@@ -4976,10 +5115,10 @@ static struct pci_device_id serial_pci_tbl[] = {
*/
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -4988,10 +5127,10 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_2DB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4DB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5000,10 +5139,10 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_2SMDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_COM_2SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SMDB,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5012,13 +5151,13 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_1,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7951 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM485_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM422_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5027,16 +5166,16 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4S,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_MPCIE_ICM232_2,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM232_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7954 },
@@ -5045,13 +5184,13 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_2SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7954 },
+ pbn_pericom_PI7C9X7952 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM485_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM422_8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
@@ -5060,19 +5199,19 @@ static struct pci_device_id serial_pci_tbl[] = {
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_4,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM232_8,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_4SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_COM_8SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
pbn_pericom_PI7C9X7958 },
{ PCI_VENDOR_ID_ACCESIO, PCI_DEVICE_ID_ACCESIO_PCIE_ICM_4SM,
PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- pbn_pericom_PI7C9X7958 },
+ pbn_pericom_PI7C9X7954 },
/*
* Topic TP560 Data/Fax/Voice 56k modem (reported by Evan Clarke)
*/
diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index 41b0dd67fcce..2d8089fc2139 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -2712,6 +2712,7 @@ static struct platform_driver arm_sbsa_uart_platform_driver = {
.name = "sbsa-uart",
.of_match_table = of_match_ptr(sbsa_uart_of_match),
.acpi_match_table = ACPI_PTR(sbsa_uart_acpi_match),
+ .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011),
},
};
@@ -2740,6 +2741,7 @@ static struct amba_driver pl011_driver = {
.drv = {
.name = "uart-pl011",
.pm = &pl011_dev_pm_ops,
+ .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_AMBA_PL011),
},
.id_table = pl011_ids,
.probe = pl011_probe,
diff --git a/drivers/tty/serial/fsl_lpuart.c b/drivers/tty/serial/fsl_lpuart.c
index 7bd511c96192..f588081e73a1 100644
--- a/drivers/tty/serial/fsl_lpuart.c
+++ b/drivers/tty/serial/fsl_lpuart.c
@@ -1565,6 +1565,8 @@ lpuart_set_termios(struct uart_port *port, struct ktermios *termios,
else
cr1 &= ~UARTCR1_PT;
}
+ } else {
+ cr1 &= ~UARTCR1_PE;
}
/* ask the core to calculate the divisor */
@@ -1769,6 +1771,8 @@ lpuart32_set_termios(struct uart_port *port, struct ktermios *termios,
else
ctrl &= ~UARTCTRL_PT;
}
+ } else {
+ ctrl &= ~UARTCTRL_PE;
}
/* ask the core to calculate the divisor */
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index c448225ef5ca..f2b0d8cee8ef 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -232,7 +232,7 @@ static void kgdboc_put_char(u8 chr)
static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
{
- int len = strlen(kmessage);
+ size_t len = strlen(kmessage);
if (len >= MAX_CONFIG_LEN) {
printk(KERN_ERR "kgdboc: config string too long\n");
@@ -254,7 +254,7 @@ static int param_set_kgdboc_var(const char *kmessage, struct kernel_param *kp)
strcpy(config, kmessage);
/* Chop out \n char as a result of echo */
- if (config[len - 1] == '\n')
+ if (len && config[len - 1] == '\n')
config[len - 1] = '\0';
if (configured == 1)
diff --git a/drivers/tty/serial/pic32_uart.c b/drivers/tty/serial/pic32_uart.c
index 7f8e99bbcb73..fb77d55a8d95 100644
--- a/drivers/tty/serial/pic32_uart.c
+++ b/drivers/tty/serial/pic32_uart.c
@@ -920,6 +920,7 @@ static struct platform_driver pic32_uart_platform_driver = {
.driver = {
.name = PIC32_DEV_NAME,
.of_match_table = of_match_ptr(pic32_serial_dt_ids),
+ .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_PIC32),
},
};
diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c
index 5609305b3676..01ff8ec78023 100644
--- a/drivers/tty/serial/samsung.c
+++ b/drivers/tty/serial/samsung.c
@@ -1335,11 +1335,14 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
+ port->status &= ~UPSTAT_AUTOCTS;
+
umcon = rd_regl(port, S3C2410_UMCON);
if (termios->c_cflag & CRTSCTS) {
umcon |= S3C2410_UMCOM_AFC;
/* Disable RTS when RX FIFO contains 63 bytes */
umcon &= ~S3C2412_UMCON_AFC_8;
+ port->status = UPSTAT_AUTOCTS;
} else {
umcon &= ~S3C2410_UMCOM_AFC;
}
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 53e6db8b0330..55ed4c66f77f 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -141,6 +141,9 @@ static void uart_start(struct tty_struct *tty)
struct uart_port *port;
unsigned long flags;
+ if (!state)
+ return;
+
port = uart_port_lock(state, flags);
__uart_start(tty);
uart_port_unlock(port, flags);
@@ -195,10 +198,15 @@ static int uart_port_startup(struct tty_struct *tty, struct uart_state *state,
if (!state->xmit.buf) {
state->xmit.buf = (unsigned char *) page;
uart_circ_clear(&state->xmit);
+ uart_port_unlock(uport, flags);
} else {
+ uart_port_unlock(uport, flags);
+ /*
+ * Do not free() the page under the port lock, see
+ * uart_shutdown().
+ */
free_page(page);
}
- uart_port_unlock(uport, flags);
retval = uport->ops->startup(uport);
if (retval == 0) {
@@ -258,6 +266,7 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
struct uart_port *uport = uart_port_check(state);
struct tty_port *port = &state->port;
unsigned long flags = 0;
+ char *xmit_buf = NULL;
/*
* Set the TTY IO error marker
@@ -288,14 +297,18 @@ static void uart_shutdown(struct tty_struct *tty, struct uart_state *state)
tty_port_set_suspended(port, 0);
/*
- * Free the transmit buffer page.
+ * Do not free() the transmit buffer page under the port lock since
+ * this can create various circular locking scenarios. For instance,
+ * console driver may need to allocate/free a debug object, which
+ * can endup in printk() recursion.
*/
uart_port_lock(state, flags);
- if (state->xmit.buf) {
- free_page((unsigned long)state->xmit.buf);
- state->xmit.buf = NULL;
- }
+ xmit_buf = state->xmit.buf;
+ state->xmit.buf = NULL;
uart_port_unlock(uport, flags);
+
+ if (xmit_buf)
+ free_page((unsigned long)xmit_buf);
}
/**
@@ -530,10 +543,12 @@ static int uart_put_char(struct tty_struct *tty, unsigned char c)
int ret = 0;
circ = &state->xmit;
- if (!circ->buf)
+ port = uart_port_lock(state, flags);
+ if (!circ->buf) {
+ uart_port_unlock(port, flags);
return 0;
+ }
- port = uart_port_lock(state, flags);
if (port && uart_circ_chars_free(circ) != 0) {
circ->buf[circ->head] = c;
circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1);
@@ -566,11 +581,13 @@ static int uart_write(struct tty_struct *tty,
return -EL3HLT;
}
+ port = uart_port_lock(state, flags);
circ = &state->xmit;
- if (!circ->buf)
+ if (!circ->buf) {
+ uart_port_unlock(port, flags);
return 0;
+ }
- port = uart_port_lock(state, flags);
while (port) {
c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
if (count < c)
@@ -703,6 +720,9 @@ static void uart_unthrottle(struct tty_struct *tty)
struct uart_port *port;
upstat_t mask = 0;
+ if (!state)
+ return;
+
port = uart_port_ref(state);
if (!port)
return;
diff --git a/drivers/tty/serial/sprd_serial.c b/drivers/tty/serial/sprd_serial.c
index 699447aa8b43..747560feb63e 100644
--- a/drivers/tty/serial/sprd_serial.c
+++ b/drivers/tty/serial/sprd_serial.c
@@ -36,7 +36,7 @@
#define SPRD_FIFO_SIZE 128
#define SPRD_DEF_RATE 26000000
#define SPRD_BAUD_IO_LIMIT 3000000
-#define SPRD_TIMEOUT 256
+#define SPRD_TIMEOUT 256000
/* the offset of serial registers and BITs for them */
/* data registers */
@@ -63,6 +63,7 @@
/* interrupt clear register */
#define SPRD_ICLR 0x0014
+#define SPRD_ICLR_TIMEOUT BIT(13)
/* line control register */
#define SPRD_LCR 0x0018
@@ -298,7 +299,8 @@ static irqreturn_t sprd_handle_irq(int irq, void *dev_id)
return IRQ_NONE;
}
- serial_out(port, SPRD_ICLR, ~0);
+ if (ims & SPRD_IMSR_TIMEOUT)
+ serial_out(port, SPRD_ICLR, SPRD_ICLR_TIMEOUT);
if (ims & (SPRD_IMSR_RX_FIFO_FULL |
SPRD_IMSR_BREAK_DETECT | SPRD_IMSR_TIMEOUT))
diff --git a/drivers/tty/serial/suncore.c b/drivers/tty/serial/suncore.c
index 127472bd6a7c..209f314745ab 100644
--- a/drivers/tty/serial/suncore.c
+++ b/drivers/tty/serial/suncore.c
@@ -111,6 +111,7 @@ void sunserial_console_termios(struct console *con, struct device_node *uart_dp)
mode = of_get_property(dp, mode_prop, NULL);
if (!mode)
mode = "9600,8,n,1,-";
+ of_node_put(dp);
}
cflag = CREAD | HUPCL | CLOCAL;
diff --git a/drivers/tty/serial/sunsu.c b/drivers/tty/serial/sunsu.c
index 9ad98eaa35bf..26ae83026c52 100644
--- a/drivers/tty/serial/sunsu.c
+++ b/drivers/tty/serial/sunsu.c
@@ -1393,22 +1393,43 @@ static inline struct console *SUNSU_CONSOLE(void)
static enum su_type su_get_type(struct device_node *dp)
{
struct device_node *ap = of_find_node_by_path("/aliases");
+ enum su_type rc = SU_PORT_PORT;
if (ap) {
const char *keyb = of_get_property(ap, "keyboard", NULL);
const char *ms = of_get_property(ap, "mouse", NULL);
+ struct device_node *match;
if (keyb) {
- if (dp == of_find_node_by_path(keyb))
- return SU_PORT_KBD;
+ match = of_find_node_by_path(keyb);
+
+ /*
+ * The pointer is used as an identifier not
+ * as a pointer, we can drop the refcount on
+ * the of__node immediately after getting it.
+ */
+ of_node_put(match);
+
+ if (dp == match) {
+ rc = SU_PORT_KBD;
+ goto out;
+ }
}
if (ms) {
- if (dp == of_find_node_by_path(ms))
- return SU_PORT_MS;
+ match = of_find_node_by_path(ms);
+
+ of_node_put(match);
+
+ if (dp == match) {
+ rc = SU_PORT_MS;
+ goto out;
+ }
}
}
- return SU_PORT_PORT;
+out:
+ of_node_put(ap);
+ return rc;
}
static int su_probe(struct platform_device *op)
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index 7497f1d4a818..ffb474c49f0f 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -128,7 +128,7 @@ MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
-#define CDNS_UART_IXR_MASK 0x00001FFF /* Valid bit mask */
+#define CDNS_UART_IXR_RXMASK 0x000021e7 /* Valid RX bit mask */
/*
* Do not enable parity error interrupt for the following
@@ -362,7 +362,13 @@ static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
cdns_uart_handle_tx(dev_id);
isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
}
- if (isrstatus & CDNS_UART_IXR_MASK)
+
+ /*
+ * Skip RX processing if RX is disabled as RXEMPTY will never be set
+ * as read bytes will not be removed from the FIFO.
+ */
+ if (isrstatus & CDNS_UART_IXR_RXMASK &&
+ !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
cdns_uart_handle_rx(dev_id, isrstatus);
spin_unlock(&port->lock);
@@ -1602,6 +1608,7 @@ static struct platform_driver cdns_uart_platform_driver = {
.name = CDNS_UART_NAME,
.of_match_table = cdns_uart_of_match,
.pm = &cdns_uart_dev_pm_ops,
+ .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_XILINX_PS_UART),
},
};
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-15 23:58:44 +0000