diff options
Diffstat (limited to 'drivers/tty')
-rw-r--r-- | drivers/tty/ehv_bytechan.c | 1 | ||||
-rw-r--r-- | drivers/tty/mxser.c | 11 | ||||
-rw-r--r-- | drivers/tty/n_tty.c | 8 | ||||
-rw-r--r-- | drivers/tty/rocket.c | 288 | ||||
-rw-r--r-- | drivers/tty/serial/8250/8250_dw.c | 7 | ||||
-rw-r--r-- | drivers/tty/serial/amba-pl011.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/mcf.c | 4 | ||||
-rw-r--r-- | drivers/tty/serial/mpc52xx_uart.c | 11 | ||||
-rw-r--r-- | drivers/tty/serial/nwpserial.c | 2 | ||||
-rw-r--r-- | drivers/tty/serial/samsung.c | 1 | ||||
-rw-r--r-- | drivers/tty/vt/vt.c | 14 | ||||
-rw-r--r-- | drivers/tty/vt/vt_ioctl.c | 67 |
12 files changed, 233 insertions, 183 deletions
diff --git a/drivers/tty/ehv_bytechan.c b/drivers/tty/ehv_bytechan.c index 6d0c27cd03da..9bffcec5ad82 100644 --- a/drivers/tty/ehv_bytechan.c +++ b/drivers/tty/ehv_bytechan.c @@ -859,6 +859,7 @@ error: */ static void __exit ehv_bc_exit(void) { + platform_driver_unregister(&ehv_bc_tty_driver); tty_unregister_driver(ehv_bc_driver); put_tty_driver(ehv_bc_driver); kfree(bcs); diff --git a/drivers/tty/mxser.c b/drivers/tty/mxser.c index 71d6eb2c93b1..4c4a23674569 100644 --- a/drivers/tty/mxser.c +++ b/drivers/tty/mxser.c @@ -1618,8 +1618,12 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (ip->type == PORT_16550A) me->fifo[p] = 1; - opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); - opmode &= OP_MODE_MASK; + if (ip->board->chip_flag == MOXA_MUST_MU860_HWID) { + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); + opmode &= OP_MODE_MASK; + } else { + opmode = RS232_MODE; + } me->iftype[p] = opmode; mutex_unlock(&port->mutex); } @@ -1676,6 +1680,9 @@ static int mxser_ioctl(struct tty_struct *tty, int shiftbit; unsigned char val, mask; + if (info->board->chip_flag != MOXA_MUST_MU860_HWID) + return -EFAULT; + p = tty->index % 4; if (cmd == MOXA_SET_OP_MODE) { if (get_user(opmode, (int __user *) argp)) diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index d655416087b7..6c7fe90ad72d 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -1573,6 +1573,14 @@ static void n_tty_set_termios(struct tty_struct *tty, struct ktermios *old) ldata->real_raw = 0; } n_tty_set_room(tty); + /* + * Fix tty hang when I_IXON(tty) is cleared, but the tty + * been stopped by STOP_CHAR(tty) before it. + */ + if (!I_IXON(tty) && old && (old->c_iflag & IXON) && !tty->flow_stopped) { + start_tty(tty); + } + /* The termios change make the tty ready for I/O */ wake_up_interruptible(&tty->write_wait); wake_up_interruptible(&tty->read_wait); diff --git a/drivers/tty/rocket.c b/drivers/tty/rocket.c index 82d35c5a58fd..354564ea47c5 100644 --- a/drivers/tty/rocket.c +++ b/drivers/tty/rocket.c @@ -150,12 +150,14 @@ static Word_t aiop_intr_bits[AIOP_CTL_SIZE] = { AIOP_INTR_BIT_3 }; +#ifdef CONFIG_PCI static Word_t upci_aiop_intr_bits[AIOP_CTL_SIZE] = { UPCI_AIOP_INTR_BIT_0, UPCI_AIOP_INTR_BIT_1, UPCI_AIOP_INTR_BIT_2, UPCI_AIOP_INTR_BIT_3 }; +#endif static Byte_t RData[RDATASIZE] = { 0x00, 0x09, 0xf6, 0x82, @@ -227,7 +229,6 @@ static unsigned long nextLineNumber; static int __init init_ISA(int i); static void rp_wait_until_sent(struct tty_struct *tty, int timeout); static void rp_flush_buffer(struct tty_struct *tty); -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model); static unsigned char GetLineNumber(int ctrl, int aiop, int ch); static unsigned char SetLineNumber(int ctrl, int aiop, int ch); static void rp_start(struct tty_struct *tty); @@ -241,11 +242,6 @@ static void sDisInterrupts(CHANNEL_T * ChP, Word_t Flags); static void sModemReset(CONTROLLER_T * CtlP, int chan, int on); static void sPCIModemReset(CONTROLLER_T * CtlP, int chan, int on); static int sWriteTxPrioByte(CHANNEL_T * ChP, Byte_t Data); -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd); static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, ByteIO_t * AiopIOList, int AiopIOListSize, int IRQNum, Byte_t Frequency, int PeriodicOnly); @@ -1775,6 +1771,145 @@ static DEFINE_PCI_DEVICE_TABLE(rocket_pci_ids) = { }; MODULE_DEVICE_TABLE(pci, rocket_pci_ids); +/* Resets the speaker controller on RocketModem II and III devices */ +static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) +{ + ByteIO_t addr; + + /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ + if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { + addr = CtlP->AiopIO[0] + 0x4F; + sOutB(addr, 0); + } + + /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ + if ((model == MODEL_UPCI_RM3_8PORT) + || (model == MODEL_UPCI_RM3_4PORT)) { + addr = CtlP->AiopIO[0] + 0x88; + sOutB(addr, 0); + } +} + +/*************************************************************************** +Function: sPCIInitController +Purpose: Initialization of controller global registers and controller + structure. +Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, + IRQNum,Frequency,PeriodicOnly) + CONTROLLER_T *CtlP; Ptr to controller structure + int CtlNum; Controller number + ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. + This list must be in the order the AIOPs will be found on the + controller. Once an AIOP in the list is not found, it is + assumed that there are no more AIOPs on the controller. + int AiopIOListSize; Number of addresses in AiopIOList + int IRQNum; Interrupt Request number. Can be any of the following: + 0: Disable global interrupts + 3: IRQ 3 + 4: IRQ 4 + 5: IRQ 5 + 9: IRQ 9 + 10: IRQ 10 + 11: IRQ 11 + 12: IRQ 12 + 15: IRQ 15 + Byte_t Frequency: A flag identifying the frequency + of the periodic interrupt, can be any one of the following: + FREQ_DIS - periodic interrupt disabled + FREQ_137HZ - 137 Hertz + FREQ_69HZ - 69 Hertz + FREQ_34HZ - 34 Hertz + FREQ_17HZ - 17 Hertz + FREQ_9HZ - 9 Hertz + FREQ_4HZ - 4 Hertz + If IRQNum is set to 0 the Frequency parameter is + overidden, it is forced to a value of FREQ_DIS. + int PeriodicOnly: 1 if all interrupts except the periodic + interrupt are to be blocked. + 0 is both the periodic interrupt and + other channel interrupts are allowed. + If IRQNum is set to 0 the PeriodicOnly parameter is + overidden, it is forced to a value of 0. +Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller + initialization failed. + +Comments: + If periodic interrupts are to be disabled but AIOP interrupts + are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. + + If interrupts are to be completely disabled set IRQNum to 0. + + Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an + invalid combination. + + This function performs initialization of global interrupt modes, + but it does not actually enable global interrupts. To enable + and disable global interrupts use functions sEnGlobalInt() and + sDisGlobalInt(). Enabling of global interrupts is normally not + done until all other initializations are complete. + + Even if interrupts are globally enabled, they must also be + individually enabled for each channel that is to generate + interrupts. + +Warnings: No range checking on any of the parameters is done. + + No context switches are allowed while executing this function. + + After this function all AIOPs on the controller are disabled, + they can be enabled with sEnAiop(). +*/ +static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, + ByteIO_t * AiopIOList, int AiopIOListSize, + WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, + int PeriodicOnly, int altChanRingIndicator, + int UPCIRingInd) +{ + int i; + ByteIO_t io; + + CtlP->AltChanRingIndicator = altChanRingIndicator; + CtlP->UPCIRingInd = UPCIRingInd; + CtlP->CtlNum = CtlNum; + CtlP->CtlID = CTLID_0001; /* controller release 1 */ + CtlP->BusType = isPCI; /* controller release 1 */ + + if (ConfigIO) { + CtlP->isUPCI = 1; + CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; + CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; + CtlP->AiopIntrBits = upci_aiop_intr_bits; + } else { + CtlP->isUPCI = 0; + CtlP->PCIIO = + (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); + CtlP->AiopIntrBits = aiop_intr_bits; + } + + sPCIControllerEOI(CtlP); /* clear EOI if warm init */ + /* Init AIOPs */ + CtlP->NumAiop = 0; + for (i = 0; i < AiopIOListSize; i++) { + io = AiopIOList[i]; + CtlP->AiopIO[i] = (WordIO_t) io; + CtlP->AiopIntChanIO[i] = io + _INT_CHAN; + + CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ + if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ + break; /* done looking for AIOPs */ + + CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ + sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ + sOutB(io + _INDX_DATA, sClockPrescale); + CtlP->NumAiop++; /* bump count of AIOPs */ + } + + if (CtlP->NumAiop == 0) + return (-1); + else + return (CtlP->NumAiop); +} + /* * Called when a PCI card is found. Retrieves and stores model information, * init's aiopic and serial port hardware. @@ -2519,147 +2654,6 @@ static int sInitController(CONTROLLER_T * CtlP, int CtlNum, ByteIO_t MudbacIO, return (CtlP->NumAiop); } -#ifdef CONFIG_PCI -/*************************************************************************** -Function: sPCIInitController -Purpose: Initialization of controller global registers and controller - structure. -Call: sPCIInitController(CtlP,CtlNum,AiopIOList,AiopIOListSize, - IRQNum,Frequency,PeriodicOnly) - CONTROLLER_T *CtlP; Ptr to controller structure - int CtlNum; Controller number - ByteIO_t *AiopIOList; List of I/O addresses for each AIOP. - This list must be in the order the AIOPs will be found on the - controller. Once an AIOP in the list is not found, it is - assumed that there are no more AIOPs on the controller. - int AiopIOListSize; Number of addresses in AiopIOList - int IRQNum; Interrupt Request number. Can be any of the following: - 0: Disable global interrupts - 3: IRQ 3 - 4: IRQ 4 - 5: IRQ 5 - 9: IRQ 9 - 10: IRQ 10 - 11: IRQ 11 - 12: IRQ 12 - 15: IRQ 15 - Byte_t Frequency: A flag identifying the frequency - of the periodic interrupt, can be any one of the following: - FREQ_DIS - periodic interrupt disabled - FREQ_137HZ - 137 Hertz - FREQ_69HZ - 69 Hertz - FREQ_34HZ - 34 Hertz - FREQ_17HZ - 17 Hertz - FREQ_9HZ - 9 Hertz - FREQ_4HZ - 4 Hertz - If IRQNum is set to 0 the Frequency parameter is - overidden, it is forced to a value of FREQ_DIS. - int PeriodicOnly: 1 if all interrupts except the periodic - interrupt are to be blocked. - 0 is both the periodic interrupt and - other channel interrupts are allowed. - If IRQNum is set to 0 the PeriodicOnly parameter is - overidden, it is forced to a value of 0. -Return: int: Number of AIOPs on the controller, or CTLID_NULL if controller - initialization failed. - -Comments: - If periodic interrupts are to be disabled but AIOP interrupts - are allowed, set Frequency to FREQ_DIS and PeriodicOnly to 0. - - If interrupts are to be completely disabled set IRQNum to 0. - - Setting Frequency to FREQ_DIS and PeriodicOnly to 1 is an - invalid combination. - - This function performs initialization of global interrupt modes, - but it does not actually enable global interrupts. To enable - and disable global interrupts use functions sEnGlobalInt() and - sDisGlobalInt(). Enabling of global interrupts is normally not - done until all other initializations are complete. - - Even if interrupts are globally enabled, they must also be - individually enabled for each channel that is to generate - interrupts. - -Warnings: No range checking on any of the parameters is done. - - No context switches are allowed while executing this function. - - After this function all AIOPs on the controller are disabled, - they can be enabled with sEnAiop(). -*/ -static int sPCIInitController(CONTROLLER_T * CtlP, int CtlNum, - ByteIO_t * AiopIOList, int AiopIOListSize, - WordIO_t ConfigIO, int IRQNum, Byte_t Frequency, - int PeriodicOnly, int altChanRingIndicator, - int UPCIRingInd) -{ - int i; - ByteIO_t io; - - CtlP->AltChanRingIndicator = altChanRingIndicator; - CtlP->UPCIRingInd = UPCIRingInd; - CtlP->CtlNum = CtlNum; - CtlP->CtlID = CTLID_0001; /* controller release 1 */ - CtlP->BusType = isPCI; /* controller release 1 */ - - if (ConfigIO) { - CtlP->isUPCI = 1; - CtlP->PCIIO = ConfigIO + _PCI_9030_INT_CTRL; - CtlP->PCIIO2 = ConfigIO + _PCI_9030_GPIO_CTRL; - CtlP->AiopIntrBits = upci_aiop_intr_bits; - } else { - CtlP->isUPCI = 0; - CtlP->PCIIO = - (WordIO_t) ((ByteIO_t) AiopIOList[0] + _PCI_INT_FUNC); - CtlP->AiopIntrBits = aiop_intr_bits; - } - - sPCIControllerEOI(CtlP); /* clear EOI if warm init */ - /* Init AIOPs */ - CtlP->NumAiop = 0; - for (i = 0; i < AiopIOListSize; i++) { - io = AiopIOList[i]; - CtlP->AiopIO[i] = (WordIO_t) io; - CtlP->AiopIntChanIO[i] = io + _INT_CHAN; - - CtlP->AiopID[i] = sReadAiopID(io); /* read AIOP ID */ - if (CtlP->AiopID[i] == AIOPID_NULL) /* if AIOP does not exist */ - break; /* done looking for AIOPs */ - - CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t) io); /* num channels in AIOP */ - sOutW((WordIO_t) io + _INDX_ADDR, _CLK_PRE); /* clock prescaler */ - sOutB(io + _INDX_DATA, sClockPrescale); - CtlP->NumAiop++; /* bump count of AIOPs */ - } - - if (CtlP->NumAiop == 0) - return (-1); - else - return (CtlP->NumAiop); -} - -/* Resets the speaker controller on RocketModem II and III devices */ -static void rmSpeakerReset(CONTROLLER_T * CtlP, unsigned long model) -{ - ByteIO_t addr; - - /* RocketModem II speaker control is at the 8th port location of offset 0x40 */ - if ((model == MODEL_RP4M) || (model == MODEL_RP6M)) { - addr = CtlP->AiopIO[0] + 0x4F; - sOutB(addr, 0); - } - - /* RocketModem III speaker control is at the 1st port location of offset 0x80 */ - if ((model == MODEL_UPCI_RM3_8PORT) - || (model == MODEL_UPCI_RM3_4PORT)) { - addr = CtlP->AiopIO[0] + 0x88; - sOutB(addr, 0); - } -} -#endif - /*************************************************************************** Function: sReadAiopID Purpose: Read the AIOP idenfication number directly from an AIOP. diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index beaa283f5cc6..d07b6af3a937 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -338,7 +338,8 @@ static int dw8250_runtime_suspend(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); - clk_disable_unprepare(data->clk); + if (!IS_ERR(data->clk)) + clk_disable_unprepare(data->clk); return 0; } @@ -347,7 +348,8 @@ static int dw8250_runtime_resume(struct device *dev) { struct dw8250_data *data = dev_get_drvdata(dev); - clk_prepare_enable(data->clk); + if (!IS_ERR(data->clk)) + clk_prepare_enable(data->clk); return 0; } @@ -367,6 +369,7 @@ MODULE_DEVICE_TABLE(of, dw8250_of_match); static const struct acpi_device_id dw8250_acpi_match[] = { { "INT33C4", 0 }, { "INT33C5", 0 }, + { "80860F0A", 0 }, { }, }; MODULE_DEVICE_TABLE(acpi, dw8250_acpi_match); diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 8ab70a620919..e2774f9ecd59 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -332,7 +332,7 @@ static void pl011_dma_probe_initcall(struct device *dev, struct uart_amba_port * dmaengine_slave_config(chan, &rx_conf); uap->dmarx.chan = chan; - if (plat->dma_rx_poll_enable) { + if (plat && plat->dma_rx_poll_enable) { /* Set poll rate if specified. */ if (plat->dma_rx_poll_rate) { uap->dmarx.auto_poll_rate = false; diff --git a/drivers/tty/serial/mcf.c b/drivers/tty/serial/mcf.c index e956377a38fe..65be0c00c4bf 100644 --- a/drivers/tty/serial/mcf.c +++ b/drivers/tty/serial/mcf.c @@ -707,8 +707,10 @@ static int __init mcf_init(void) if (rc) return rc; rc = platform_driver_register(&mcf_platform_driver); - if (rc) + if (rc) { + uart_unregister_driver(&mcf_driver); return rc; + } return 0; } diff --git a/drivers/tty/serial/mpc52xx_uart.c b/drivers/tty/serial/mpc52xx_uart.c index 018bad922554..f51b280f3bf2 100644 --- a/drivers/tty/serial/mpc52xx_uart.c +++ b/drivers/tty/serial/mpc52xx_uart.c @@ -1497,18 +1497,23 @@ mpc52xx_uart_init(void) if (psc_ops && psc_ops->fifoc_init) { ret = psc_ops->fifoc_init(); if (ret) - return ret; + goto err_init; } ret = platform_driver_register(&mpc52xx_uart_of_driver); if (ret) { printk(KERN_ERR "%s: platform_driver_register failed (%i)\n", __FILE__, ret); - uart_unregister_driver(&mpc52xx_uart_driver); - return ret; + goto err_reg; } return 0; +err_reg: + if (psc_ops && psc_ops->fifoc_uninit) + psc_ops->fifoc_uninit(); +err_init: + uart_unregister_driver(&mpc52xx_uart_driver); + return ret; } static void __exit diff --git a/drivers/tty/serial/nwpserial.c b/drivers/tty/serial/nwpserial.c index 77287c54f331..549c70a2a63e 100644 --- a/drivers/tty/serial/nwpserial.c +++ b/drivers/tty/serial/nwpserial.c @@ -199,7 +199,7 @@ static void nwpserial_shutdown(struct uart_port *port) dcr_write(up->dcr_host, UART_IER, up->ier); /* free irq */ - free_irq(up->port.irq, port); + free_irq(up->port.irq, up); } static int nwpserial_verify_port(struct uart_port *port, diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index 074b9194144f..89429410a245 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -1803,6 +1803,7 @@ static int __init s3c24xx_serial_modinit(void) static void __exit s3c24xx_serial_modexit(void) { + platform_driver_unregister(&samsung_serial_driver); uart_unregister_driver(&s3c24xx_uart_drv); } diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index fbd447b390f7..740202d8a5c4 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -779,7 +779,6 @@ int vc_allocate(unsigned int currcons) /* return 0 on success */ con_set_default_unimap(vc); vc->vc_screenbuf = kmalloc(vc->vc_screenbuf_size, GFP_KERNEL); if (!vc->vc_screenbuf) { - tty_port_destroy(&vc->port); kfree(vc); vc_cons[currcons].d = NULL; return -ENOMEM; @@ -986,26 +985,25 @@ static int vt_resize(struct tty_struct *tty, struct winsize *ws) return ret; } -void vc_deallocate(unsigned int currcons) +struct vc_data *vc_deallocate(unsigned int currcons) { + struct vc_data *vc = NULL; + WARN_CONSOLE_UNLOCKED(); if (vc_cons_allocated(currcons)) { - struct vc_data *vc = vc_cons[currcons].d; - struct vt_notifier_param param = { .vc = vc }; + struct vt_notifier_param param; + param.vc = vc = vc_cons[currcons].d; atomic_notifier_call_chain(&vt_notifier_list, VT_DEALLOCATE, ¶m); vcs_remove_sysfs(currcons); vc->vc_sw->con_deinit(vc); put_pid(vc->vt_pid); module_put(vc->vc_sw->owner); kfree(vc->vc_screenbuf); - if (currcons >= MIN_NR_CONSOLES) { - tty_port_destroy(&vc->port); - kfree(vc); - } vc_cons[currcons].d = NULL; } + return vc; } /* diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c index 98ff1735eafc..fc2c06c66e89 100644 --- a/drivers/tty/vt/vt_ioctl.c +++ b/drivers/tty/vt/vt_ioctl.c @@ -283,6 +283,51 @@ do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_ return 0; } +/* deallocate a single console, if possible (leave 0) */ +static int vt_disallocate(unsigned int vc_num) +{ + struct vc_data *vc = NULL; + int ret = 0; + + if (!vc_num) + return 0; + + console_lock(); + if (VT_BUSY(vc_num)) + ret = -EBUSY; + else + vc = vc_deallocate(vc_num); + console_unlock(); + + if (vc && vc_num >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc->port); + kfree(vc); + } + + return ret; +} + +/* deallocate all unused consoles, but leave 0 */ +static void vt_disallocate_all(void) +{ + struct vc_data *vc[MAX_NR_CONSOLES]; + int i; + + console_lock(); + for (i = 1; i < MAX_NR_CONSOLES; i++) + if (!VT_BUSY(i)) + vc[i] = vc_deallocate(i); + else + vc[i] = NULL; + console_unlock(); + + for (i = 1; i < MAX_NR_CONSOLES; i++) { + if (vc[i] && i >= MIN_NR_CONSOLES) { + tty_port_destroy(&vc[i]->port); + kfree(vc[i]); + } + } +} /* @@ -769,24 +814,10 @@ int vt_ioctl(struct tty_struct *tty, ret = -ENXIO; break; } - if (arg == 0) { - /* deallocate all unused consoles, but leave 0 */ - console_lock(); - for (i=1; i<MAX_NR_CONSOLES; i++) - if (! VT_BUSY(i)) - vc_deallocate(i); - console_unlock(); - } else { - /* deallocate a single console, if possible */ - arg--; - if (VT_BUSY(arg)) - ret = -EBUSY; - else if (arg) { /* leave 0 */ - console_lock(); - vc_deallocate(arg); - console_unlock(); - } - } + if (arg == 0) + vt_disallocate_all(); + else + ret = vt_disallocate(--arg); break; case VT_RESIZE: |