diff options
Diffstat (limited to 'drivers/usb/dwc3/gadget.c')
| -rw-r--r-- | drivers/usb/dwc3/gadget.c | 70 |
1 files changed, 52 insertions, 18 deletions
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a58376fd65fe..69ffe6e8d77f 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -388,24 +388,66 @@ static void dwc3_free_trb_pool(struct dwc3_ep *dep) dep->trb_pool_dma = 0; } +static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep); + +/** + * dwc3_gadget_start_config - Configure EP resources + * @dwc: pointer to our controller context structure + * @dep: endpoint that is being enabled + * + * The assignment of transfer resources cannot perfectly follow the + * data book due to the fact that the controller driver does not have + * all knowledge of the configuration in advance. It is given this + * information piecemeal by the composite gadget framework after every + * SET_CONFIGURATION and SET_INTERFACE. Trying to follow the databook + * programming model in this scenario can cause errors. For two + * reasons: + * + * 1) The databook says to do DEPSTARTCFG for every SET_CONFIGURATION + * and SET_INTERFACE (8.1.5). This is incorrect in the scenario of + * multiple interfaces. + * + * 2) The databook does not mention doing more DEPXFERCFG for new + * endpoint on alt setting (8.1.6). + * + * The following simplified method is used instead: + * + * All hardware endpoints can be assigned a transfer resource and this + * setting will stay persistent until either a core reset or + * hibernation. So whenever we do a DEPSTARTCFG(0) we can go ahead and + * do DEPXFERCFG for every hardware endpoint as well. We are + * guaranteed that there are as many transfer resources as endpoints. + * + * This function is called for each endpoint when it is being enabled + * but is triggered only when called for EP0-out, which always happens + * first, and which should only happen in one of the above conditions. + */ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_gadget_ep_cmd_params params; u32 cmd; + int i; + int ret; + + if (dep->number) + return 0; memset(¶ms, 0x00, sizeof(params)); + cmd = DWC3_DEPCMD_DEPSTARTCFG; - if (dep->number != 1) { - cmd = DWC3_DEPCMD_DEPSTARTCFG; - /* XferRscIdx == 0 for ep0 and 2 for the remaining */ - if (dep->number > 1) { - if (dwc->start_config_issued) - return 0; - dwc->start_config_issued = true; - cmd |= DWC3_DEPCMD_PARAM(2); - } + ret = dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + if (ret) + return ret; - return dwc3_send_gadget_ep_cmd(dwc, 0, cmd, ¶ms); + for (i = 0; i < DWC3_ENDPOINTS_NUM; i++) { + struct dwc3_ep *dep = dwc->eps[i]; + + if (!dep) + continue; + + ret = dwc3_gadget_set_xfer_resource(dwc, dep); + if (ret) + return ret; } return 0; @@ -519,10 +561,6 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, struct dwc3_trb *trb_st_hw; struct dwc3_trb *trb_link; - ret = dwc3_gadget_set_xfer_resource(dwc, dep); - if (ret) - return ret; - dep->endpoint.desc = desc; dep->comp_desc = comp_desc; dep->type = usb_endpoint_type(desc); @@ -1604,8 +1642,6 @@ static int dwc3_gadget_start(struct usb_gadget *g, } dwc3_writel(dwc->regs, DWC3_DCFG, reg); - dwc->start_config_issued = false; - /* Start with SuperSpeed Default */ dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); @@ -2202,7 +2238,6 @@ static void dwc3_gadget_disconnect_interrupt(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_DCTL, reg); dwc3_disconnect_gadget(dwc); - dwc->start_config_issued = false; dwc->gadget.speed = USB_SPEED_UNKNOWN; dwc->setup_packet_pending = false; @@ -2253,7 +2288,6 @@ static void dwc3_gadget_reset_interrupt(struct dwc3 *dwc) dwc3_stop_active_transfers(dwc); dwc3_clear_stall_all_ep(dwc); - dwc->start_config_issued = false; /* Reset device address to zero */ reg = dwc3_readl(dwc->regs, DWC3_DCFG); |