summaryrefslogtreecommitdiff
path: root/drivers/usb/dwc3
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/dwc3')
-rw-r--r--drivers/usb/dwc3/core.c10
-rw-r--r--drivers/usb/dwc3/core.h18
-rw-r--r--drivers/usb/dwc3/dwc3-pci.c25
-rw-r--r--drivers/usb/dwc3/gadget.c61
4 files changed, 95 insertions, 19 deletions
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 2bbab3d86fff..8e9518fe7763 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -445,12 +445,18 @@ static int dwc3_core_init(struct dwc3 *dwc)
reg = dwc3_readl(dwc->regs, DWC3_GSNPSID);
/* This should read as U3 followed by revision number */
- if ((reg & DWC3_GSNPSID_MASK) != 0x55330000) {
+ if ((reg & DWC3_GSNPSID_MASK) == 0x55330000) {
+ /* Detected DWC_usb3 IP */
+ dwc->revision = reg;
+ } else if ((reg & DWC3_GSNPSID_MASK) == 0x33310000) {
+ /* Detected DWC_usb31 IP */
+ dwc->revision = dwc3_readl(dwc->regs, DWC3_VER_NUMBER);
+ dwc->revision |= DWC3_REVISION_IS_DWC31;
+ } else {
dev_err(dwc->dev, "this is not a DesignWare USB3 DRD Core\n");
ret = -ENODEV;
goto err0;
}
- dwc->revision = reg;
/*
* Write Linux Version Code to our GUID register so it's easy to figure
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index c0eafa6fd403..173edd4ca20e 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -107,6 +107,9 @@
#define DWC3_GPRTBIMAP_FS0 0xc188
#define DWC3_GPRTBIMAP_FS1 0xc18c
+#define DWC3_VER_NUMBER 0xc1a0
+#define DWC3_VER_TYPE 0xc1a4
+
#define DWC3_GUSB2PHYCFG(n) (0xc200 + (n * 0x04))
#define DWC3_GUSB2I2CCTL(n) (0xc240 + (n * 0x04))
@@ -752,6 +755,14 @@ struct dwc3 {
u32 num_event_buffers;
u32 u1u2;
u32 maximum_speed;
+
+ /*
+ * All 3.1 IP version constants are greater than the 3.0 IP
+ * version constants. This works for most version checks in
+ * dwc3. However, in the future, this may not apply as
+ * features may be developed on newer versions of the 3.0 IP
+ * that are not in the 3.1 IP.
+ */
u32 revision;
#define DWC3_REVISION_173A 0x5533173a
@@ -774,6 +785,13 @@ struct dwc3 {
#define DWC3_REVISION_270A 0x5533270a
#define DWC3_REVISION_280A 0x5533280a
+/*
+ * NOTICE: we're using bit 31 as a "is usb 3.1" flag. This is really
+ * just so dwc31 revisions are always larger than dwc3.
+ */
+#define DWC3_REVISION_IS_DWC31 0x80000000
+#define DWC3_USB31_REVISION_110A (0x3131302a | DWC3_REVISION_IS_USB31)
+
enum dwc3_ep0_next ep0_next_event;
enum dwc3_ep0_state ep0state;
enum dwc3_link_state link_state;
diff --git a/drivers/usb/dwc3/dwc3-pci.c b/drivers/usb/dwc3/dwc3-pci.c
index b773fb53d6a7..830f020230c4 100644
--- a/drivers/usb/dwc3/dwc3-pci.c
+++ b/drivers/usb/dwc3/dwc3-pci.c
@@ -25,6 +25,8 @@
#include "platform_data.h"
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI 0xabce
+#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31 0xabcf
#define PCI_DEVICE_ID_INTEL_BYT 0x0f37
#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e
#define PCI_DEVICE_ID_INTEL_BSW 0x22B7
@@ -65,6 +67,21 @@ static int dwc3_pci_quirks(struct pci_dev *pdev)
sizeof(pdata));
}
+ if (pdev->vendor == PCI_VENDOR_ID_SYNOPSYS &&
+ (pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 ||
+ pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI ||
+ pdev->device == PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31)) {
+
+ struct dwc3_platform_data pdata;
+
+ memset(&pdata, 0, sizeof(pdata));
+ pdata.usb3_lpm_capable = true;
+ pdata.has_lpm_erratum = true;
+
+ return platform_device_add_data(pci_get_drvdata(pdev), &pdata,
+ sizeof(pdata));
+ }
+
return 0;
}
@@ -136,6 +153,14 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
},
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+ PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3_AXI),
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
+ PCI_DEVICE_ID_SYNOPSYS_HAPSUSB31),
+ },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index 333a7c0078fc..6fbf461d523c 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -1859,27 +1859,32 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep,
unsigned int i;
int ret;
- req = next_request(&dep->req_queued);
- if (!req) {
- WARN_ON_ONCE(1);
- return 1;
- }
- i = 0;
do {
- slot = req->start_slot + i;
- if ((slot == DWC3_TRB_NUM - 1) &&
+ req = next_request(&dep->req_queued);
+ if (!req) {
+ WARN_ON_ONCE(1);
+ return 1;
+ }
+ i = 0;
+ do {
+ slot = req->start_slot + i;
+ if ((slot == DWC3_TRB_NUM - 1) &&
usb_endpoint_xfer_isoc(dep->endpoint.desc))
- slot++;
- slot %= DWC3_TRB_NUM;
- trb = &dep->trb_pool[slot];
+ slot++;
+ slot %= DWC3_TRB_NUM;
+ trb = &dep->trb_pool[slot];
+
+ ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
+ event, status);
+ if (ret)
+ break;
+ } while (++i < req->request.num_mapped_sgs);
+
+ dwc3_gadget_giveback(dep, req, status);
- ret = __dwc3_cleanup_done_trbs(dwc, dep, req, trb,
- event, status);
if (ret)
break;
- } while (++i < req->request.num_mapped_sgs);
-
- dwc3_gadget_giveback(dep, req, status);
+ } while (1);
if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
list_empty(&dep->req_queued)) {
@@ -2709,12 +2714,34 @@ int dwc3_gadget_init(struct dwc3 *dwc)
}
dwc->gadget.ops = &dwc3_gadget_ops;
- dwc->gadget.max_speed = USB_SPEED_SUPER;
dwc->gadget.speed = USB_SPEED_UNKNOWN;
dwc->gadget.sg_supported = true;
dwc->gadget.name = "dwc3-gadget";
/*
+ * FIXME We might be setting max_speed to <SUPER, however versions
+ * <2.20a of dwc3 have an issue with metastability (documented
+ * elsewhere in this driver) which tells us we can't set max speed to
+ * anything lower than SUPER.
+ *
+ * Because gadget.max_speed is only used by composite.c and function
+ * drivers (i.e. it won't go into dwc3's registers) we are allowing this
+ * to happen so we avoid sending SuperSpeed Capability descriptor
+ * together with our BOS descriptor as that could confuse host into
+ * thinking we can handle super speed.
+ *
+ * Note that, in fact, we won't even support GetBOS requests when speed
+ * is less than super speed because we don't have means, yet, to tell
+ * composite.c that we are USB 2.0 + LPM ECN.
+ */
+ if (dwc->revision < DWC3_REVISION_220A)
+ dwc3_trace(trace_dwc3_gadget,
+ "Changing max_speed on rev %08x\n",
+ dwc->revision);
+
+ dwc->gadget.max_speed = dwc->maximum_speed;
+
+ /*
* Per databook, DWC3 needs buffer size to be aligned to MaxPacketSize
* on ep out.
*/
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-11 16:14:05 +0000