summaryrefslogtreecommitdiff
path: root/drivers/usb/gadget/Kconfig
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/gadget/Kconfig')
-rw-r--r--drivers/usb/gadget/Kconfig77
1 files changed, 73 insertions, 4 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index 607d0db4a988..1dc9739277b4 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -338,6 +338,19 @@ config USB_S3C2410_DEBUG
boolean "S3C2410 udc debug messages"
depends on USB_GADGET_S3C2410
+config USB_GADGET_PXA_U2O
+ boolean "PXA9xx Processor USB2.0 controller"
+ select USB_GADGET_DUALSPEED
+ help
+ PXA9xx Processor series include a high speed USB2.0 device
+ controller, which support high speed and full speed USB peripheral.
+
+config USB_PXA_U2O
+ tristate
+ depends on USB_GADGET_PXA_U2O
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
#
# Controllers available in both integrated and discrete versions
#
@@ -414,8 +427,8 @@ config USB_FSL_QE
default USB_GADGET
select USB_GADGET_SELECTED
-config USB_GADGET_CI13XXX
- boolean "MIPS USB CI13xxx"
+config USB_GADGET_CI13XXX_PCI
+ boolean "MIPS USB CI13xxx PCI UDC"
depends on PCI
select USB_GADGET_DUALSPEED
help
@@ -426,9 +439,9 @@ config USB_GADGET_CI13XXX
dynamically linked module called "ci13xxx_udc" and force all
gadget drivers to also be dynamically linked.
-config USB_CI13XXX
+config USB_CI13XXX_PCI
tristate
- depends on USB_GADGET_CI13XXX
+ depends on USB_GADGET_CI13XXX_PCI
default USB_GADGET
select USB_GADGET_SELECTED
@@ -495,6 +508,49 @@ config USB_LANGWELL
default USB_GADGET
select USB_GADGET_SELECTED
+config USB_GADGET_EG20T
+ boolean "Intel EG20T(Topcliff) USB Device controller"
+ depends on PCI
+ select USB_GADGET_DUALSPEED
+ help
+ This is a USB device driver for EG20T PCH.
+ EG20T PCH is the platform controller hub that is used in Intel's
+ general embedded platform. EG20T PCH has USB device interface.
+ Using this interface, it is able to access system devices connected
+ to USB device.
+ This driver enables USB device function.
+ USB device is a USB peripheral controller which
+ supports both full and high speed USB 2.0 data transfers.
+ This driver supports both control transfer and bulk transfer modes.
+ This driver dose not support interrupt transfer or isochronous
+ transfer modes.
+
+config USB_EG20T
+ tristate
+ depends on USB_GADGET_EG20T
+ default USB_GADGET
+ select USB_GADGET_SELECTED
+
+config USB_GADGET_CI13XXX_MSM
+ boolean "MIPS USB CI13xxx for MSM"
+ depends on ARCH_MSM
+ select USB_GADGET_DUALSPEED
+ select USB_MSM_OTG_72K
+ help
+ MSM SoC has chipidea USB controller. This driver uses
+ ci13xxx_udc core.
+ This driver depends on OTG driver for PHY initialization,
+ clock management, powering up VBUS, and power management.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "ci13xxx_msm" and force all
+ gadget drivers to also be dynamically linked.
+
+config USB_CI13XXX_MSM
+ tristate
+ depends on USB_GADGET_CI13XXX_MSM
+ default USB_GADGET
+ select USB_GADGET_SELECTED
#
# LAST -- dummy/emulated controller
@@ -685,6 +741,19 @@ config USB_ETH_EEM
If you say "y" here, the Ethernet gadget driver will use the EEM
protocol rather than ECM. If unsure, say "n".
+config USB_G_NCM
+ tristate "Network Control Model (NCM) support"
+ depends on NET
+ select CRC32
+ help
+ This driver implements USB CDC NCM subclass standard. NCM is
+ an advanced protocol for Ethernet encapsulation, allows grouping
+ of several ethernet frames into one USB transfer and diffferent
+ alignment possibilities.
+
+ Say "y" to link the driver statically, or "m" to build a
+ dynamically linked module called "g_ncm".
+
config USB_GADGETFS
tristate "Gadget Filesystem (EXPERIMENTAL)"
depends on EXPERIMENTAL