diff options
Diffstat (limited to 'drivers/usb/gadget/Kconfig')
| -rw-r--r-- | drivers/usb/gadget/Kconfig | 176 |
1 files changed, 168 insertions, 8 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 1a27ef1df409..62f6802f6e0f 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -192,6 +192,16 @@ config USB_FUSB300 help Faraday usb device controller FUSB300 driver +config USB_FOTG210_UDC + tristate "Faraday FOTG210 USB Peripheral Controller" + help + Faraday USB2.0 OTG controller which can be configured as + high speed or full speed USB device. This driver supppors + Bulk Transfer so far. + + Say "y" to link the driver statically, or "m" to build a + dynamically linked module called "fotg210_udc". + config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 @@ -334,14 +344,6 @@ config USB_MV_U3D # Controllers available in both integrated and discrete versions # -# musb builds in ../musb along with host support -config USB_GADGET_MUSB_HDRC - tristate "Inventra HDRC USB Peripheral (TI, ADI, ...)" - depends on USB_MUSB_HDRC - help - This OTG-capable silicon IP is used in dual designs including - the TI DaVinci, OMAP 243x, OMAP 343x, TUSB 6010, and ADI Blackfin - config USB_M66592 tristate "Renesas M66592 USB Peripheral Controller" help @@ -507,12 +509,36 @@ config USB_F_SS_LB config USB_U_SERIAL tristate +config USB_U_ETHER + tristate + +config USB_U_RNDIS + tristate + config USB_F_SERIAL tristate config USB_F_OBEX tristate +config USB_F_NCM + tristate + +config USB_F_ECM + tristate + +config USB_F_PHONET + tristate + +config USB_F_EEM + tristate + +config USB_F_SUBSET + tristate + +config USB_F_RNDIS + tristate + choice tristate "USB Gadget Drivers" default USB_ETH @@ -534,6 +560,121 @@ choice # this first set of drivers all depend on bulk-capable hardware. +config USB_CONFIGFS + tristate "USB functions configurable through configfs" + select USB_LIBCOMPOSITE + help + A Linux USB "gadget" can be set up through configfs. + If this is the case, the USB functions (which from the host's + perspective are seen as interfaces) and configurations are + specified simply by creating appropriate directories in configfs. + Associating functions with configurations is done by creating + appropriate symbolic links. + For more information see Documentation/usb/gadget-configfs.txt. + +config USB_CONFIGFS_SERIAL + boolean "Generic serial bulk in/out" + depends on USB_CONFIGFS + depends on TTY + select USB_U_SERIAL + select USB_F_SERIAL + help + The function talks to the Linux-USB generic serial driver. + +config USB_CONFIGFS_ACM + boolean "Abstract Control Model (CDC ACM)" + depends on USB_CONFIGFS + depends on TTY + select USB_U_SERIAL + select USB_F_ACM + help + ACM serial link. This function can be used to interoperate with + MS-Windows hosts or with the Linux-USB "cdc-acm" driver. + +config USB_CONFIGFS_OBEX + boolean "Object Exchange Model (CDC OBEX)" + depends on USB_CONFIGFS + depends on TTY + select USB_U_SERIAL + select USB_F_OBEX + help + You will need a user space OBEX server talking to /dev/ttyGS*, + since the kernel itself doesn't implement the OBEX protocol. + +config USB_CONFIGFS_NCM + boolean "Network Control Model (CDC NCM)" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_NCM + help + NCM is an advanced protocol for Ethernet encapsulation, allows + grouping of several ethernet frames into one USB transfer and + different alignment possibilities. + +config USB_CONFIGFS_ECM + boolean "Ethernet Control Model (CDC ECM)" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_ECM + help + The "Communication Device Class" (CDC) Ethernet Control Model. + That protocol is often avoided with pure Ethernet adapters, in + favor of simpler vendor-specific hardware, but is widely + supported by firmware for smart network devices. + +config USB_CONFIGFS_ECM_SUBSET + boolean "Ethernet Control Model (CDC ECM) subset" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_SUBSET + help + On hardware that can't implement the full protocol, + a simple CDC subset is used, placing fewer demands on USB. + +config USB_CONFIGFS_RNDIS + bool "RNDIS" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_RNDIS + help + Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, + and Microsoft provides redistributable binary RNDIS drivers for + older versions of Windows. + + To make MS-Windows work with this, use Documentation/usb/linux.inf + as the "driver info file". For versions of MS-Windows older than + XP, you'll need to download drivers from Microsoft's website; a URL + is given in comments found in that info file. + +config USB_CONFIGFS_EEM + bool "Ethernet Emulation Model (EEM)" + depends on USB_CONFIGFS + depends on NET + select USB_U_ETHER + select USB_F_EEM + help + CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM + and therefore can be supported by more hardware. Technically ECM and + EEM are designed for different applications. The ECM model extends + the network interface to the target (e.g. a USB cable modem), and the + EEM model is for mobile devices to communicate with hosts using + ethernet over USB. For Linux gadgets, however, the interface with + the host is the same (a usbX device), so the differences are minimal. + +config USB_CONFIGFS_PHONET + boolean "Phonet protocol" + depends on USB_CONFIGFS + depends on NET + depends on PHONET + select USB_U_ETHER + select USB_F_PHONET + help + The Phonet protocol implementation for USB device. + config USB_ZERO tristate "Gadget Zero (DEVELOPMENT)" select USB_LIBCOMPOSITE @@ -603,6 +744,10 @@ config USB_ETH tristate "Ethernet Gadget (with CDC Ethernet support)" depends on NET select USB_LIBCOMPOSITE + select USB_U_ETHER + select USB_U_RNDIS + select USB_F_ECM + select USB_F_SUBSET select CRC32 help This driver implements Ethernet style communication, in one of @@ -639,6 +784,7 @@ config USB_ETH_RNDIS bool "RNDIS support" depends on USB_ETH select USB_LIBCOMPOSITE + select USB_F_RNDIS default y help Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol, @@ -658,6 +804,7 @@ config USB_ETH_EEM bool "Ethernet Emulation Model (EEM) support" depends on USB_ETH select USB_LIBCOMPOSITE + select USB_F_EEM default n help CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM @@ -675,6 +822,8 @@ config USB_G_NCM tristate "Network Control Model (NCM) support" depends on NET select USB_LIBCOMPOSITE + select USB_U_ETHER + select USB_F_NCM select CRC32 help This driver implements USB CDC NCM subclass standard. NCM is @@ -718,6 +867,7 @@ config USB_FUNCTIONFS config USB_FUNCTIONFS_ETH bool "Include configuration with CDC ECM (Ethernet)" depends on USB_FUNCTIONFS && NET + select USB_U_ETHER help Include a configuration with CDC ECM function (Ethernet) and the Function Filesystem. @@ -725,6 +875,8 @@ config USB_FUNCTIONFS_ETH config USB_FUNCTIONFS_RNDIS bool "Include configuration with RNDIS (Ethernet)" depends on USB_FUNCTIONFS && NET + select USB_U_ETHER + select USB_U_RNDIS help Include a configuration with RNDIS function (Ethernet) and the Filesystem. @@ -825,7 +977,9 @@ config USB_CDC_COMPOSITE depends on NET select USB_LIBCOMPOSITE select USB_U_SERIAL + select USB_U_ETHER select USB_F_ACM + select USB_F_ECM help This driver provides two functions in one configuration: a CDC Ethernet (ECM) link, and a CDC ACM (serial port) link. @@ -842,7 +996,11 @@ config USB_G_NOKIA depends on PHONET select USB_LIBCOMPOSITE select USB_U_SERIAL + select USB_U_ETHER select USB_F_ACM + select USB_F_OBEX + select USB_F_PHONET + select USB_F_ECM help The Nokia composite gadget provides support for acm, obex and phonet in only one composite gadget driver. @@ -869,6 +1027,8 @@ config USB_G_MULTI select USB_G_MULTI_CDC if !USB_G_MULTI_RNDIS select USB_LIBCOMPOSITE select USB_U_SERIAL + select USB_U_ETHER + select USB_U_RNDIS select USB_F_ACM help The Multifunction Composite Gadget provides Ethernet (RNDIS |