diff options
Diffstat (limited to 'drivers/usb/gadget/atmel_usba_udc.c')
| -rw-r--r-- | drivers/usb/gadget/atmel_usba_udc.c | 41 |
1 files changed, 35 insertions, 6 deletions
diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index ddb7301a0138..c9a3c2a462c4 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -326,6 +326,28 @@ static int vbus_is_present(struct usba_udc *udc) return 1; } +#if defined(CONFIG_AVR32) + +static void toggle_bias(int is_on) +{ +} + +#elif defined(CONFIG_ARCH_AT91) + +#include <asm/arch/at91_pmc.h> + +static void toggle_bias(int is_on) +{ + unsigned int uckr = at91_sys_read(AT91_CKGR_UCKR); + + if (is_on) + at91_sys_write(AT91_CKGR_UCKR, uckr | AT91_PMC_BIASEN); + else + at91_sys_write(AT91_CKGR_UCKR, uckr & ~(AT91_PMC_BIASEN)); +} + +#endif /* CONFIG_ARCH_AT91 */ + static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) { unsigned int transaction_len; @@ -1457,7 +1479,7 @@ restart: DBG(DBG_HW, "Packet length: %u\n", pkt_len); if (pkt_len != sizeof(crq)) { pr_warning("udc: Invalid packet length %u " - "(expected %lu)\n", pkt_len, sizeof(crq)); + "(expected %zu)\n", pkt_len, sizeof(crq)); set_protocol_stall(udc, ep); return; } @@ -1615,6 +1637,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) DBG(DBG_INT, "irq, status=%#08x\n", status); if (status & USBA_DET_SUSPEND) { + toggle_bias(0); usba_writel(udc, INT_CLR, USBA_DET_SUSPEND); DBG(DBG_BUS, "Suspend detected\n"); if (udc->gadget.speed != USB_SPEED_UNKNOWN @@ -1626,6 +1649,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) } if (status & USBA_WAKE_UP) { + toggle_bias(1); usba_writel(udc, INT_CLR, USBA_WAKE_UP); DBG(DBG_BUS, "Wake Up CPU detected\n"); } @@ -1719,12 +1743,14 @@ static irqreturn_t usba_vbus_irq(int irq, void *devid) vbus = gpio_get_value(udc->vbus_pin); if (vbus != udc->vbus_prev) { if (vbus) { - usba_writel(udc, CTRL, USBA_EN_USBA); + toggle_bias(1); + usba_writel(udc, CTRL, USBA_ENABLE_MASK); usba_writel(udc, INT_ENB, USBA_END_OF_RESET); } else { udc->gadget.speed = USB_SPEED_UNKNOWN; reset_all_endpoints(udc); - usba_writel(udc, CTRL, 0); + toggle_bias(0); + usba_writel(udc, CTRL, USBA_DISABLE_MASK); spin_unlock(&udc->lock); udc->driver->disconnect(&udc->gadget); spin_lock(&udc->lock); @@ -1777,7 +1803,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) /* If Vbus is present, enable the controller and wait for reset */ spin_lock_irqsave(&udc->lock, flags); if (vbus_is_present(udc) && udc->vbus_prev == 0) { - usba_writel(udc, CTRL, USBA_EN_USBA); + toggle_bias(1); + usba_writel(udc, CTRL, USBA_ENABLE_MASK); usba_writel(udc, INT_ENB, USBA_END_OF_RESET); } spin_unlock_irqrestore(&udc->lock, flags); @@ -1810,7 +1837,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) spin_unlock_irqrestore(&udc->lock, flags); /* This will also disable the DP pullup */ - usba_writel(udc, CTRL, 0); + toggle_bias(0); + usba_writel(udc, CTRL, USBA_DISABLE_MASK); driver->unbind(&udc->gadget); udc->gadget.dev.driver = NULL; @@ -1880,7 +1908,8 @@ static int __init usba_udc_probe(struct platform_device *pdev) /* Make sure we start from a clean slate */ clk_enable(pclk); - usba_writel(udc, CTRL, 0); + toggle_bias(0); + usba_writel(udc, CTRL, USBA_DISABLE_MASK); clk_disable(pclk); usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep, |