summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-hub.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-hub.c')
-rw-r--r--drivers/usb/host/ehci-hub.c104
1 files changed, 76 insertions, 28 deletions
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 1b20722c102b..bfe5f307cba6 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -34,6 +34,7 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int port;
+ int mask;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
@@ -51,14 +52,25 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
ehci->reclaim_ready = 1;
ehci_work(ehci);
- /* suspend any active/unsuspended ports, maybe allow wakeup */
+ /* Unlike other USB host controller types, EHCI doesn't have
+ * any notion of "global" or bus-wide suspend. The driver has
+ * to manually suspend all the active unsuspended ports, and
+ * then manually resume them in the bus_resume() routine.
+ */
+ ehci->bus_suspended = 0;
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
u32 t1 = readl (reg) & ~PORT_RWC_BITS;
u32 t2 = t1;
- if ((t1 & PORT_PE) && !(t1 & PORT_OWNER))
+ /* keep track of which ports we suspend */
+ if ((t1 & PORT_PE) && !(t1 & PORT_OWNER) &&
+ !(t1 & PORT_SUSPEND)) {
t2 |= PORT_SUSPEND;
+ set_bit(port, &ehci->bus_suspended);
+ }
+
+ /* enable remote wakeup on all ports */
if (device_may_wakeup(&hcd->self.root_hub->dev))
t2 |= PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E;
else
@@ -76,6 +88,13 @@ static int ehci_bus_suspend (struct usb_hcd *hcd)
ehci_halt (ehci);
hcd->state = HC_STATE_SUSPENDED;
+ /* allow remote wakeup */
+ mask = INTR_MASK;
+ if (!device_may_wakeup(&hcd->self.root_hub->dev))
+ mask &= ~STS_PCD;
+ writel(mask, &ehci->regs->intr_enable);
+ readl(&ehci->regs->intr_enable);
+
ehci->next_statechange = jiffies + msecs_to_jiffies(10);
spin_unlock_irq (&ehci->lock);
return 0;
@@ -88,7 +107,6 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
int i;
- int intr_enable;
if (time_before (jiffies, ehci->next_statechange))
msleep(5);
@@ -100,31 +118,30 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
* the last user of the controller, not reset/pm hardware keeping
* state we gave to it.
*/
+ temp = readl(&ehci->regs->intr_enable);
+ ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");
- /* re-init operational registers in case we lost power */
- if (readl (&ehci->regs->intr_enable) == 0) {
- /* at least some APM implementations will try to deliver
- * IRQs right away, so delay them until we're ready.
- */
- intr_enable = 1;
- writel (0, &ehci->regs->segment);
- writel (ehci->periodic_dma, &ehci->regs->frame_list);
- writel ((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- } else
- intr_enable = 0;
- ehci_dbg(ehci, "resume root hub%s\n",
- intr_enable ? " after power loss" : "");
+ /* at least some APM implementations will try to deliver
+ * IRQs right away, so delay them until we're ready.
+ */
+ writel(0, &ehci->regs->intr_enable);
+
+ /* re-init operational registers */
+ writel(0, &ehci->regs->segment);
+ writel(ehci->periodic_dma, &ehci->regs->frame_list);
+ writel((u32) ehci->async->qh_dma, &ehci->regs->async_next);
/* restore CMD_RUN, framelist size, and irq threshold */
writel (ehci->command, &ehci->regs->command);
- /* take ports out of suspend */
+ /* manually resume the ports we suspended during bus_suspend() */
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
temp = readl (&ehci->regs->port_status [i]);
temp &= ~(PORT_RWC_BITS
| PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
- if (temp & PORT_SUSPEND) {
+ if (test_bit(i, &ehci->bus_suspended) &&
+ (temp & PORT_SUSPEND)) {
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
temp |= PORT_RESUME;
}
@@ -134,11 +151,12 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
mdelay (20);
while (i--) {
temp = readl (&ehci->regs->port_status [i]);
- if ((temp & PORT_SUSPEND) == 0)
- continue;
- temp &= ~(PORT_RWC_BITS | PORT_RESUME);
- writel (temp, &ehci->regs->port_status [i]);
- ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+ if (test_bit(i, &ehci->bus_suspended) &&
+ (temp & PORT_SUSPEND)) {
+ temp &= ~(PORT_RWC_BITS | PORT_RESUME);
+ writel (temp, &ehci->regs->port_status [i]);
+ ehci_vdbg (ehci, "resumed port %d\n", i + 1);
+ }
}
(void) readl (&ehci->regs->command);
@@ -157,8 +175,7 @@ static int ehci_bus_resume (struct usb_hcd *hcd)
hcd->state = HC_STATE_RUNNING;
/* Now we can safely re-enable irqs */
- if (intr_enable)
- writel (INTR_MASK, &ehci->regs->intr_enable);
+ writel(INTR_MASK, &ehci->regs->intr_enable);
spin_unlock_irq (&ehci->lock);
return 0;
@@ -218,6 +235,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp, status = 0;
+ u32 mask;
int ports, i, retval = 1;
unsigned long flags;
@@ -233,6 +251,18 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
retval++;
}
+ /* Some boards (mostly VIA?) report bogus overcurrent indications,
+ * causing massive log spam unless we completely ignore them. It
+ * may be relevant that VIA VT8235 controlers, where PORT_POWER is
+ * always set, seem to clear PORT_OCC and PORT_CSC when writing to
+ * PORT_POWER; that's surprising, but maybe within-spec.
+ */
+ if (!ignore_oc)
+ mask = PORT_CSC | PORT_PEC | PORT_OCC;
+ else
+ mask = PORT_CSC | PORT_PEC;
+ // PORT_RESUME from hardware ~= PORT_STAT_C_SUSPEND
+
/* no hub change reports (bit 0) for now (power, ...) */
/* port N changes (bit N)? */
@@ -250,8 +280,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
}
if (!(temp & PORT_CONNECT))
ehci->reset_done [i] = 0;
- if ((temp & (PORT_CSC | PORT_PEC | PORT_OCC)) != 0
- // PORT_STAT_C_SUSPEND?
+ if ((temp & mask) != 0
|| ((temp & PORT_RESUME) != 0
&& time_after (jiffies,
ehci->reset_done [i]))) {
@@ -319,6 +348,7 @@ static int ehci_hub_control (
u32 temp, status;
unsigned long flags;
int retval = 0;
+ unsigned selector;
/*
* FIXME: support SetPortFeatures USB_PORT_FEAT_INDICATOR.
@@ -417,7 +447,7 @@ static int ehci_hub_control (
status |= 1 << USB_PORT_FEAT_C_CONNECTION;
if (temp & PORT_PEC)
status |= 1 << USB_PORT_FEAT_C_ENABLE;
- if (temp & PORT_OCC)
+ if ((temp & PORT_OCC) && !ignore_oc)
status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
/* whoever resumes must GetPortStatus to complete it!! */
@@ -506,6 +536,8 @@ static int ehci_hub_control (
}
break;
case SetPortFeature:
+ selector = wIndex >> 8;
+ wIndex &= 0xff;
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
@@ -559,6 +591,22 @@ static int ehci_hub_control (
}
writel (temp, &ehci->regs->port_status [wIndex]);
break;
+
+ /* For downstream facing ports (these): one hub port is put
+ * into test mode according to USB2 11.24.2.13, then the hub
+ * must be reset (which for root hub now means rmmod+modprobe,
+ * or else system reboot). See EHCI 2.3.9 and 4.14 for info
+ * about the EHCI-specific stuff.
+ */
+ case USB_PORT_FEAT_TEST:
+ if (!selector || selector > 5)
+ goto error;
+ ehci_quiesce(ehci);
+ ehci_halt(ehci);
+ temp |= selector << 16;
+ writel (temp, &ehci->regs->port_status [wIndex]);
+ break;
+
default:
goto error;
}
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-02 18:40:40 +0000