summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ehci-omap.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ehci-omap.c')
-rw-r--r--drivers/usb/host/ehci-omap.c310
1 files changed, 242 insertions, 68 deletions
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index 116ae280053a..0374eb47f09b 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -1,11 +1,12 @@
/*
- * ehci-omap.c - driver for USBHOST on OMAP 34xx processor
+ * ehci-omap.c - driver for USBHOST on OMAP3/4 processors
*
- * Bus Glue for OMAP34xx USBHOST 3 port EHCI controller
- * Tested on OMAP3430 ES2.0 SDP
+ * Bus Glue for the EHCI controllers in OMAP3/4
+ * Tested on several OMAP3 boards, and OMAP4 Pandaboard
*
- * Copyright (C) 2007-2008 Texas Instruments, Inc.
+ * Copyright (C) 2007-2010 Texas Instruments, Inc.
* Author: Vikram Pandita <vikram.pandita@ti.com>
+ * Author: Anand Gadiyar <gadiyar@ti.com>
*
* Copyright (C) 2009 Nokia Corporation
* Contact: Felipe Balbi <felipe.balbi@nokia.com>
@@ -26,11 +27,14 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * TODO (last updated Feb 12, 2010):
+ * TODO (last updated Nov 21, 2010):
* - add kernel-doc
* - enable AUTOIDLE
* - add suspend/resume
* - move workarounds to board-files
+ * - factor out code common to OHCI
+ * - add HSIC and TLL support
+ * - convert to use hwmod and runtime PM
*/
#include <linux/platform_device.h>
@@ -114,6 +118,23 @@
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
+/* OMAP4-specific defines */
+#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2)
+#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2)
+
+#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4)
+#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4)
+#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0)
+
+#define OMAP4_P1_MODE_CLEAR (3 << 16)
+#define OMAP4_P1_MODE_TLL (1 << 16)
+#define OMAP4_P1_MODE_HSIC (3 << 16)
+#define OMAP4_P2_MODE_CLEAR (3 << 18)
+#define OMAP4_P2_MODE_TLL (1 << 18)
+#define OMAP4_P2_MODE_HSIC (3 << 18)
+
+#define OMAP_REV2_TLL_CHANNEL_COUNT 2
+
#define OMAP_UHH_DEBUG_CSR (0x44)
/* EHCI Register Set */
@@ -127,6 +148,17 @@
#define EHCI_INSNREG05_ULPI_EXTREGADD_SHIFT 8
#define EHCI_INSNREG05_ULPI_WRDATA_SHIFT 0
+/* Values of UHH_REVISION - Note: these are not given in the TRM */
+#define OMAP_EHCI_REV1 0x00000010 /* OMAP3 */
+#define OMAP_EHCI_REV2 0x50700100 /* OMAP4 */
+
+#define is_omap_ehci_rev1(x) (x->omap_ehci_rev == OMAP_EHCI_REV1)
+#define is_omap_ehci_rev2(x) (x->omap_ehci_rev == OMAP_EHCI_REV2)
+
+#define is_ehci_phy_mode(x) (x == EHCI_HCD_OMAP_MODE_PHY)
+#define is_ehci_tll_mode(x) (x == EHCI_HCD_OMAP_MODE_TLL)
+#define is_ehci_hsic_mode(x) (x == EHCI_HCD_OMAP_MODE_HSIC)
+
/*-------------------------------------------------------------------------*/
static inline void ehci_omap_writel(void __iomem *base, u32 reg, u32 val)
@@ -156,10 +188,14 @@ struct ehci_hcd_omap {
struct device *dev;
struct clk *usbhost_ick;
- struct clk *usbhost2_120m_fck;
- struct clk *usbhost1_48m_fck;
+ struct clk *usbhost_hs_fck;
+ struct clk *usbhost_fs_fck;
struct clk *usbtll_fck;
struct clk *usbtll_ick;
+ struct clk *xclk60mhsp1_ck;
+ struct clk *xclk60mhsp2_ck;
+ struct clk *utmi_p1_fck;
+ struct clk *utmi_p2_fck;
/* FIXME the following two workarounds are
* board specific not silicon-specific so these
@@ -176,6 +212,9 @@ struct ehci_hcd_omap {
/* phy reset workaround */
int phy_reset;
+ /* IP revision */
+ u32 omap_ehci_rev;
+
/* desired phy_mode: TLL, PHY */
enum ehci_hcd_omap_mode port_mode[OMAP3_HS_USB_PORTS];
@@ -191,13 +230,14 @@ struct ehci_hcd_omap {
/*-------------------------------------------------------------------------*/
-static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
+static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask,
+ u8 tll_channel_count)
{
unsigned reg;
int i;
/* Program the 3 TLL channels upfront */
- for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+ for (i = 0; i < tll_channel_count; i++) {
reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
/* Disable AutoIdle, BitStuffing and use SDR Mode */
@@ -217,7 +257,7 @@ static void omap_usb_utmi_init(struct ehci_hcd_omap *omap, u8 tll_channel_mask)
ehci_omap_writel(omap->tll_base, OMAP_TLL_SHARED_CONF, reg);
/* Enable channels now */
- for (i = 0; i < OMAP_TLL_CHANNEL_COUNT; i++) {
+ for (i = 0; i < tll_channel_count; i++) {
reg = ehci_omap_readl(omap->tll_base, OMAP_TLL_CHANNEL_CONF(i));
/* Enable only the reg that is needed */
@@ -286,19 +326,19 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
}
clk_enable(omap->usbhost_ick);
- omap->usbhost2_120m_fck = clk_get(omap->dev, "usbhost_120m_fck");
- if (IS_ERR(omap->usbhost2_120m_fck)) {
- ret = PTR_ERR(omap->usbhost2_120m_fck);
+ omap->usbhost_hs_fck = clk_get(omap->dev, "hs_fck");
+ if (IS_ERR(omap->usbhost_hs_fck)) {
+ ret = PTR_ERR(omap->usbhost_hs_fck);
goto err_host_120m_fck;
}
- clk_enable(omap->usbhost2_120m_fck);
+ clk_enable(omap->usbhost_hs_fck);
- omap->usbhost1_48m_fck = clk_get(omap->dev, "usbhost_48m_fck");
- if (IS_ERR(omap->usbhost1_48m_fck)) {
- ret = PTR_ERR(omap->usbhost1_48m_fck);
+ omap->usbhost_fs_fck = clk_get(omap->dev, "fs_fck");
+ if (IS_ERR(omap->usbhost_fs_fck)) {
+ ret = PTR_ERR(omap->usbhost_fs_fck);
goto err_host_48m_fck;
}
- clk_enable(omap->usbhost1_48m_fck);
+ clk_enable(omap->usbhost_fs_fck);
if (omap->phy_reset) {
/* Refer: ISSUE1 */
@@ -333,6 +373,80 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
}
clk_enable(omap->usbtll_ick);
+ omap->omap_ehci_rev = ehci_omap_readl(omap->uhh_base,
+ OMAP_UHH_REVISION);
+ dev_dbg(omap->dev, "OMAP UHH_REVISION 0x%x\n",
+ omap->omap_ehci_rev);
+
+ /*
+ * Enable per-port clocks as needed (newer controllers only).
+ * - External ULPI clock for PHY mode
+ * - Internal clocks for TLL and HSIC modes (TODO)
+ */
+ if (is_omap_ehci_rev2(omap)) {
+ switch (omap->port_mode[0]) {
+ case EHCI_HCD_OMAP_MODE_PHY:
+ omap->xclk60mhsp1_ck = clk_get(omap->dev,
+ "xclk60mhsp1_ck");
+ if (IS_ERR(omap->xclk60mhsp1_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp1_ck);
+ dev_err(omap->dev,
+ "Unable to get Port1 ULPI clock\n");
+ }
+
+ omap->utmi_p1_fck = clk_get(omap->dev,
+ "utmi_p1_gfclk");
+ if (IS_ERR(omap->utmi_p1_fck)) {
+ ret = PTR_ERR(omap->utmi_p1_fck);
+ dev_err(omap->dev,
+ "Unable to get utmi_p1_fck\n");
+ }
+
+ ret = clk_set_parent(omap->utmi_p1_fck,
+ omap->xclk60mhsp1_ck);
+ if (ret != 0) {
+ dev_err(omap->dev,
+ "Unable to set P1 f-clock\n");
+ }
+ break;
+ case EHCI_HCD_OMAP_MODE_TLL:
+ /* TODO */
+ default:
+ break;
+ }
+ switch (omap->port_mode[1]) {
+ case EHCI_HCD_OMAP_MODE_PHY:
+ omap->xclk60mhsp2_ck = clk_get(omap->dev,
+ "xclk60mhsp2_ck");
+ if (IS_ERR(omap->xclk60mhsp2_ck)) {
+ ret = PTR_ERR(omap->xclk60mhsp2_ck);
+ dev_err(omap->dev,
+ "Unable to get Port2 ULPI clock\n");
+ }
+
+ omap->utmi_p2_fck = clk_get(omap->dev,
+ "utmi_p2_gfclk");
+ if (IS_ERR(omap->utmi_p2_fck)) {
+ ret = PTR_ERR(omap->utmi_p2_fck);
+ dev_err(omap->dev,
+ "Unable to get utmi_p2_fck\n");
+ }
+
+ ret = clk_set_parent(omap->utmi_p2_fck,
+ omap->xclk60mhsp2_ck);
+ if (ret != 0) {
+ dev_err(omap->dev,
+ "Unable to set P2 f-clock\n");
+ }
+ break;
+ case EHCI_HCD_OMAP_MODE_TLL:
+ /* TODO */
+ default:
+ break;
+ }
+ }
+
+
/* perform TLL soft reset, and wait until reset is complete */
ehci_omap_writel(omap->tll_base, OMAP_USBTLL_SYSCONFIG,
OMAP_USBTLL_SYSCONFIG_SOFTRESET);
@@ -360,12 +474,20 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
/* Put UHH in NoIdle/NoStandby mode */
reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSCONFIG);
- reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
- | OMAP_UHH_SYSCONFIG_SIDLEMODE
- | OMAP_UHH_SYSCONFIG_CACTIVITY
- | OMAP_UHH_SYSCONFIG_MIDLEMODE);
- reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+ if (is_omap_ehci_rev1(omap)) {
+ reg |= (OMAP_UHH_SYSCONFIG_ENAWAKEUP
+ | OMAP_UHH_SYSCONFIG_SIDLEMODE
+ | OMAP_UHH_SYSCONFIG_CACTIVITY
+ | OMAP_UHH_SYSCONFIG_MIDLEMODE);
+ reg &= ~OMAP_UHH_SYSCONFIG_AUTOIDLE;
+
+ } else if (is_omap_ehci_rev2(omap)) {
+ reg &= ~OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR;
+ reg |= OMAP4_UHH_SYSCONFIG_NOIDLE;
+ reg &= ~OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR;
+ reg |= OMAP4_UHH_SYSCONFIG_NOSTDBY;
+ }
ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG, reg);
reg = ehci_omap_readl(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
@@ -376,40 +498,56 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
- if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
- reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
- if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
- reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
- if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
- reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
-
- /* Bypass the TLL module for PHY mode operation */
- if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
- dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
- if ((omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY) ||
- (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY) ||
- (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY))
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
- else
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
- } else {
- dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
- if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_PHY)
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
- else if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_TLL)
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
-
- if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_PHY)
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
- else if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_TLL)
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
-
- if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_PHY)
- reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
- else if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_TLL)
- reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+ if (is_omap_ehci_rev1(omap)) {
+ if (omap->port_mode[0] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+ reg &= ~OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS;
+ if (omap->port_mode[1] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+ reg &= ~OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS;
+ if (omap->port_mode[2] == EHCI_HCD_OMAP_MODE_UNKNOWN)
+ reg &= ~OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS;
+
+ /* Bypass the TLL module for PHY mode operation */
+ if (cpu_is_omap3430() && (omap_rev() <= OMAP3430_REV_ES2_1)) {
+ dev_dbg(omap->dev, "OMAP3 ES version <= ES2.1\n");
+ if (is_ehci_phy_mode(omap->port_mode[0]) ||
+ is_ehci_phy_mode(omap->port_mode[1]) ||
+ is_ehci_phy_mode(omap->port_mode[2]))
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+ else
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
+ } else {
+ dev_dbg(omap->dev, "OMAP3 ES version > ES2.1\n");
+ if (is_ehci_phy_mode(omap->port_mode[0]))
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+ else if (is_ehci_tll_mode(omap->port_mode[0]))
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
+
+ if (is_ehci_phy_mode(omap->port_mode[1]))
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+ else if (is_ehci_tll_mode(omap->port_mode[1]))
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS;
+
+ if (is_ehci_phy_mode(omap->port_mode[2]))
+ reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+ else if (is_ehci_tll_mode(omap->port_mode[2]))
+ reg |= OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS;
+ }
+ } else if (is_omap_ehci_rev2(omap)) {
+ /* Clear port mode fields for PHY mode*/
+ reg &= ~OMAP4_P1_MODE_CLEAR;
+ reg &= ~OMAP4_P2_MODE_CLEAR;
+
+ if (is_ehci_tll_mode(omap->port_mode[0]))
+ reg |= OMAP4_P1_MODE_TLL;
+ else if (is_ehci_hsic_mode(omap->port_mode[0]))
+ reg |= OMAP4_P1_MODE_HSIC;
+ if (is_ehci_tll_mode(omap->port_mode[1]))
+ reg |= OMAP4_P2_MODE_TLL;
+ else if (is_ehci_hsic_mode(omap->port_mode[1]))
+ reg |= OMAP4_P2_MODE_HSIC;
}
+
ehci_omap_writel(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
dev_dbg(omap->dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
@@ -438,7 +576,7 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
tll_ch_mask |= OMAP_TLL_CHANNEL_3_EN_MASK;
/* Enable UTMI mode for required TLL channels */
- omap_usb_utmi_init(omap, tll_ch_mask);
+ omap_usb_utmi_init(omap, tll_ch_mask, OMAP_TLL_CHANNEL_COUNT);
}
if (omap->phy_reset) {
@@ -464,6 +602,14 @@ static int omap_start_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
return 0;
err_sys_status:
+ clk_disable(omap->utmi_p2_fck);
+ clk_put(omap->utmi_p2_fck);
+ clk_disable(omap->xclk60mhsp2_ck);
+ clk_put(omap->xclk60mhsp2_ck);
+ clk_disable(omap->utmi_p1_fck);
+ clk_put(omap->utmi_p1_fck);
+ clk_disable(omap->xclk60mhsp1_ck);
+ clk_put(omap->xclk60mhsp1_ck);
clk_disable(omap->usbtll_ick);
clk_put(omap->usbtll_ick);
@@ -472,8 +618,8 @@ err_tll_ick:
clk_put(omap->usbtll_fck);
err_tll_fck:
- clk_disable(omap->usbhost1_48m_fck);
- clk_put(omap->usbhost1_48m_fck);
+ clk_disable(omap->usbhost_fs_fck);
+ clk_put(omap->usbhost_fs_fck);
if (omap->phy_reset) {
if (gpio_is_valid(omap->reset_gpio_port[0]))
@@ -484,8 +630,8 @@ err_tll_fck:
}
err_host_48m_fck:
- clk_disable(omap->usbhost2_120m_fck);
- clk_put(omap->usbhost2_120m_fck);
+ clk_disable(omap->usbhost_hs_fck);
+ clk_put(omap->usbhost_hs_fck);
err_host_120m_fck:
clk_disable(omap->usbhost_ick);
@@ -503,6 +649,8 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
/* Reset OMAP modules for insmod/rmmod to work */
ehci_omap_writel(omap->uhh_base, OMAP_UHH_SYSCONFIG,
+ is_omap_ehci_rev2(omap) ?
+ OMAP4_UHH_SYSCONFIG_SOFTRESET :
OMAP_UHH_SYSCONFIG_SOFTRESET);
while (!(ehci_omap_readl(omap->uhh_base, OMAP_UHH_SYSSTATUS)
& (1 << 0))) {
@@ -550,16 +698,16 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
omap->usbhost_ick = NULL;
}
- if (omap->usbhost1_48m_fck != NULL) {
- clk_disable(omap->usbhost1_48m_fck);
- clk_put(omap->usbhost1_48m_fck);
- omap->usbhost1_48m_fck = NULL;
+ if (omap->usbhost_fs_fck != NULL) {
+ clk_disable(omap->usbhost_fs_fck);
+ clk_put(omap->usbhost_fs_fck);
+ omap->usbhost_fs_fck = NULL;
}
- if (omap->usbhost2_120m_fck != NULL) {
- clk_disable(omap->usbhost2_120m_fck);
- clk_put(omap->usbhost2_120m_fck);
- omap->usbhost2_120m_fck = NULL;
+ if (omap->usbhost_hs_fck != NULL) {
+ clk_disable(omap->usbhost_hs_fck);
+ clk_put(omap->usbhost_hs_fck);
+ omap->usbhost_hs_fck = NULL;
}
if (omap->usbtll_ick != NULL) {
@@ -568,6 +716,32 @@ static void omap_stop_ehc(struct ehci_hcd_omap *omap, struct usb_hcd *hcd)
omap->usbtll_ick = NULL;
}
+ if (is_omap_ehci_rev2(omap)) {
+ if (omap->xclk60mhsp1_ck != NULL) {
+ clk_disable(omap->xclk60mhsp1_ck);
+ clk_put(omap->xclk60mhsp1_ck);
+ omap->xclk60mhsp1_ck = NULL;
+ }
+
+ if (omap->utmi_p1_fck != NULL) {
+ clk_disable(omap->utmi_p1_fck);
+ clk_put(omap->utmi_p1_fck);
+ omap->utmi_p1_fck = NULL;
+ }
+
+ if (omap->xclk60mhsp2_ck != NULL) {
+ clk_disable(omap->xclk60mhsp2_ck);
+ clk_put(omap->xclk60mhsp2_ck);
+ omap->xclk60mhsp2_ck = NULL;
+ }
+
+ if (omap->utmi_p2_fck != NULL) {
+ clk_disable(omap->utmi_p2_fck);
+ clk_put(omap->utmi_p2_fck);
+ omap->utmi_p2_fck = NULL;
+ }
+ }
+
if (omap->phy_reset) {
if (gpio_is_valid(omap->reset_gpio_port[0]))
gpio_free(omap->reset_gpio_port[0]);