summaryrefslogtreecommitdiff
path: root/drivers/usb/host/ohci-at91.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/ohci-at91.c')
-rw-r--r--drivers/usb/host/ohci-at91.c239
1 files changed, 220 insertions, 19 deletions
diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c
index 944291e10f97..ba3a46b78b75 100644
--- a/drivers/usb/host/ohci-at91.c
+++ b/drivers/usb/host/ohci-at91.c
@@ -35,8 +35,7 @@ extern int usb_disabled(void);
static void at91_start_clock(void)
{
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_enable(hclk);
+ clk_enable(hclk);
clk_enable(iclk);
clk_enable(fclk);
clocked = 1;
@@ -46,8 +45,7 @@ static void at91_stop_clock(void)
{
clk_disable(fclk);
clk_disable(iclk);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_disable(hclk);
+ clk_disable(hclk);
clocked = 0;
}
@@ -142,8 +140,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
iclk = clk_get(&pdev->dev, "ohci_clk");
fclk = clk_get(&pdev->dev, "uhpck");
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- hclk = clk_get(&pdev->dev, "hck0");
+ hclk = clk_get(&pdev->dev, "hclk");
at91_start_hc(pdev);
ohci_hcd_init(hcd_to_ohci(hcd));
@@ -155,8 +152,7 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver,
/* Error handling */
at91_stop_hc(pdev);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_put(hclk);
+ clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
@@ -192,8 +188,7 @@ static void usb_hcd_at91_remove(struct usb_hcd *hcd,
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
usb_put_hcd(hcd);
- if (cpu_is_at91sam9261() || cpu_is_at91sam9g10())
- clk_put(hclk);
+ clk_put(hclk);
clk_put(fclk);
clk_put(iclk);
fclk = iclk = hclk = NULL;
@@ -223,6 +218,156 @@ ohci_at91_start (struct usb_hcd *hcd)
return 0;
}
+static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int enable)
+{
+ if (port < 0 || port >= 2)
+ return;
+
+ gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable);
+}
+
+static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port)
+{
+ if (port < 0 || port >= 2)
+ return -EINVAL;
+
+ return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted;
+}
+
+/*
+ * Update the status data from the hub with the over-current indicator change.
+ */
+static int ohci_at91_hub_status_data(struct usb_hcd *hcd, char *buf)
+{
+ struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+ int length = ohci_hub_status_data(hcd, buf);
+ int port;
+
+ for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+ if (pdata->overcurrent_changed[port]) {
+ if (! length)
+ length = 1;
+ buf[0] |= 1 << (port + 1);
+ }
+ }
+
+ return length;
+}
+
+/*
+ * Look at the control requests to the root hub and see if we need to override.
+ */
+static int ohci_at91_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
+ u16 wIndex, char *buf, u16 wLength)
+{
+ struct at91_usbh_data *pdata = hcd->self.controller->platform_data;
+ struct usb_hub_descriptor *desc;
+ int ret = -EINVAL;
+ u32 *data = (u32 *)buf;
+
+ dev_dbg(hcd->self.controller,
+ "ohci_at91_hub_control(%p,0x%04x,0x%04x,0x%04x,%p,%04x)\n",
+ hcd, typeReq, wValue, wIndex, buf, wLength);
+
+ switch (typeReq) {
+ case SetPortFeature:
+ if (wValue == USB_PORT_FEAT_POWER) {
+ dev_dbg(hcd->self.controller, "SetPortFeat: POWER\n");
+ ohci_at91_usb_set_power(pdata, wIndex - 1, 1);
+ goto out;
+ }
+ break;
+
+ case ClearPortFeature:
+ switch (wValue) {
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: C_OVER_CURRENT\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ pdata->overcurrent_changed[wIndex-1] = 0;
+ pdata->overcurrent_status[wIndex-1] = 0;
+ }
+
+ goto out;
+
+ case USB_PORT_FEAT_OVER_CURRENT:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: OVER_CURRENT\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ pdata->overcurrent_status[wIndex-1] = 0;
+ }
+
+ goto out;
+
+ case USB_PORT_FEAT_POWER:
+ dev_dbg(hcd->self.controller,
+ "ClearPortFeature: POWER\n");
+
+ if (wIndex == 1 || wIndex == 2) {
+ ohci_at91_usb_set_power(pdata, wIndex - 1, 0);
+ return 0;
+ }
+ }
+ break;
+ }
+
+ ret = ohci_hub_control(hcd, typeReq, wValue, wIndex, buf, wLength);
+ if (ret)
+ goto out;
+
+ switch (typeReq) {
+ case GetHubDescriptor:
+
+ /* update the hub's descriptor */
+
+ desc = (struct usb_hub_descriptor *)buf;
+
+ dev_dbg(hcd->self.controller, "wHubCharacteristics 0x%04x\n",
+ desc->wHubCharacteristics);
+
+ /* remove the old configurations for power-switching, and
+ * over-current protection, and insert our new configuration
+ */
+
+ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_LPSM);
+ desc->wHubCharacteristics |= cpu_to_le16(0x0001);
+
+ if (pdata->overcurrent_supported) {
+ desc->wHubCharacteristics &= ~cpu_to_le16(HUB_CHAR_OCPM);
+ desc->wHubCharacteristics |= cpu_to_le16(0x0008|0x0001);
+ }
+
+ dev_dbg(hcd->self.controller, "wHubCharacteristics after 0x%04x\n",
+ desc->wHubCharacteristics);
+
+ return ret;
+
+ case GetPortStatus:
+ /* check port status */
+
+ dev_dbg(hcd->self.controller, "GetPortStatus(%d)\n", wIndex);
+
+ if (wIndex == 1 || wIndex == 2) {
+ if (! ohci_at91_usb_get_power(pdata, wIndex-1)) {
+ *data &= ~cpu_to_le32(RH_PS_PPS);
+ }
+
+ if (pdata->overcurrent_changed[wIndex-1]) {
+ *data |= cpu_to_le32(RH_PS_OCIC);
+ }
+
+ if (pdata->overcurrent_status[wIndex-1]) {
+ *data |= cpu_to_le32(RH_PS_POCI);
+ }
+ }
+ }
+
+ out:
+ return ret;
+}
+
/*-------------------------------------------------------------------------*/
static const struct hc_driver ohci_at91_hc_driver = {
@@ -258,8 +403,8 @@ static const struct hc_driver ohci_at91_hc_driver = {
/*
* root hub support
*/
- .hub_status_data = ohci_hub_status_data,
- .hub_control = ohci_hub_control,
+ .hub_status_data = ohci_at91_hub_status_data,
+ .hub_control = ohci_at91_hub_control,
#ifdef CONFIG_PM
.bus_suspend = ohci_bus_suspend,
.bus_resume = ohci_bus_resume,
@@ -269,22 +414,71 @@ static const struct hc_driver ohci_at91_hc_driver = {
/*-------------------------------------------------------------------------*/
+static irqreturn_t ohci_hcd_at91_overcurrent_irq(int irq, void *data)
+{
+ struct platform_device *pdev = data;
+ struct at91_usbh_data *pdata = pdev->dev.platform_data;
+ int val, gpio, port;
+
+ /* From the GPIO notifying the over-current situation, find
+ * out the corresponding port */
+ gpio = irq_to_gpio(irq);
+ for (port = 0; port < ARRAY_SIZE(pdata->overcurrent_pin); port++) {
+ if (pdata->overcurrent_pin[port] == gpio)
+ break;
+ }
+
+ if (port == ARRAY_SIZE(pdata->overcurrent_pin)) {
+ dev_err(& pdev->dev, "overcurrent interrupt from unknown GPIO\n");
+ return IRQ_HANDLED;
+ }
+
+ val = gpio_get_value(gpio);
+
+ /* When notified of an over-current situation, disable power
+ on the corresponding port, and mark this port in
+ over-current. */
+ if (! val) {
+ ohci_at91_usb_set_power(pdata, port, 0);
+ pdata->overcurrent_status[port] = 1;
+ pdata->overcurrent_changed[port] = 1;
+ }
+
+ dev_dbg(& pdev->dev, "overcurrent situation %s\n",
+ val ? "exited" : "notified");
+
+ return IRQ_HANDLED;
+}
+
+/*-------------------------------------------------------------------------*/
+
static int ohci_hcd_at91_drv_probe(struct platform_device *pdev)
{
struct at91_usbh_data *pdata = pdev->dev.platform_data;
int i;
if (pdata) {
- /* REVISIT make the driver support per-port power switching,
- * and also overcurrent detection. Here we assume the ports
- * are always powered while this driver is active, and use
- * active-low power switches.
- */
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
gpio_request(pdata->vbus_pin[i], "ohci_vbus");
- gpio_direction_output(pdata->vbus_pin[i], 0);
+ ohci_at91_usb_set_power(pdata, i, 1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+ int ret;
+
+ if (pdata->overcurrent_pin[i] <= 0)
+ continue;
+ gpio_request(pdata->overcurrent_pin[i], "ohci_overcurrent");
+
+ ret = request_irq(gpio_to_irq(pdata->overcurrent_pin[i]),
+ ohci_hcd_at91_overcurrent_irq,
+ IRQF_SHARED, "ohci_overcurrent", pdev);
+ if (ret) {
+ gpio_free(pdata->overcurrent_pin[i]);
+ dev_warn(& pdev->dev, "cannot get GPIO IRQ for overcurrent\n");
+ }
}
}
@@ -301,9 +495,16 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev)
for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) {
if (pdata->vbus_pin[i] <= 0)
continue;
- gpio_direction_output(pdata->vbus_pin[i], 1);
+ ohci_at91_usb_set_power(pdata, i, 0);
gpio_free(pdata->vbus_pin[i]);
}
+
+ for (i = 0; i < ARRAY_SIZE(pdata->overcurrent_pin); i++) {
+ if (pdata->overcurrent_pin[i] <= 0)
+ continue;
+ free_irq(gpio_to_irq(pdata->overcurrent_pin[i]), pdev);
+ gpio_free(pdata->overcurrent_pin[i]);
+ }
}
device_init_wakeup(&pdev->dev, 0);