summaryrefslogtreecommitdiff
path: root/drivers/usb/host/xhci-mem.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host/xhci-mem.c')
-rw-r--r--drivers/usb/host/xhci-mem.c173
1 files changed, 171 insertions, 2 deletions
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 202770676da3..1d0f45f0e7a6 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1045,7 +1045,7 @@ static inline u32 xhci_get_max_esit_payload(struct xhci_hcd *xhci,
if (udev->speed == USB_SPEED_SUPER)
return ep->ss_ep_comp.wBytesPerInterval;
- max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
max_burst = (ep->desc.wMaxPacketSize & 0x1800) >> 11;
/* A 0 in max burst means 1 transfer per ESIT */
return max_packet * (max_burst + 1);
@@ -1135,7 +1135,7 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
/* Fall through */
case USB_SPEED_FULL:
case USB_SPEED_LOW:
- max_packet = ep->desc.wMaxPacketSize & 0x3ff;
+ max_packet = GET_MAX_PACKET(ep->desc.wMaxPacketSize);
ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
break;
default:
@@ -1443,6 +1443,13 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
xhci->dcbaa = NULL;
scratchpad_free(xhci);
+
+ xhci->num_usb2_ports = 0;
+ xhci->num_usb3_ports = 0;
+ kfree(xhci->usb2_ports);
+ kfree(xhci->usb3_ports);
+ kfree(xhci->port_array);
+
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->bus_suspended = 0;
@@ -1627,6 +1634,166 @@ static void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
&xhci->ir_set->erst_dequeue);
}
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+ u32 __iomem *addr, u8 major_revision)
+{
+ u32 temp, port_offset, port_count;
+ int i;
+
+ if (major_revision > 0x03) {
+ xhci_warn(xhci, "Ignoring unknown port speed, "
+ "Ext Cap %p, revision = 0x%x\n",
+ addr, major_revision);
+ /* Ignoring port protocol we can't understand. FIXME */
+ return;
+ }
+
+ /* Port offset and count in the third dword, see section 7.2 */
+ temp = xhci_readl(xhci, addr + 2);
+ port_offset = XHCI_EXT_PORT_OFF(temp);
+ port_count = XHCI_EXT_PORT_COUNT(temp);
+ xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+ "count = %u, revision = 0x%x\n",
+ addr, port_offset, port_count, major_revision);
+ /* Port count includes the current port offset */
+ if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+ /* WTF? "Valid values are ‘1’ to MaxPorts" */
+ return;
+ port_offset--;
+ for (i = port_offset; i < (port_offset + port_count); i++) {
+ /* Duplicate entry. Ignore the port if the revisions differ. */
+ if (xhci->port_array[i] != 0) {
+ xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+ " port %u\n", addr, i);
+ xhci_warn(xhci, "Port was marked as USB %u, "
+ "duplicated as USB %u\n",
+ xhci->port_array[i], major_revision);
+ /* Only adjust the roothub port counts if we haven't
+ * found a similar duplicate.
+ */
+ if (xhci->port_array[i] != major_revision &&
+ xhci->port_array[i] != (u8) -1) {
+ if (xhci->port_array[i] == 0x03)
+ xhci->num_usb3_ports--;
+ else
+ xhci->num_usb2_ports--;
+ xhci->port_array[i] = (u8) -1;
+ }
+ /* FIXME: Should we disable the port? */
+ continue;
+ }
+ xhci->port_array[i] = major_revision;
+ if (major_revision == 0x03)
+ xhci->num_usb3_ports++;
+ else
+ xhci->num_usb2_ports++;
+ }
+ /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be. We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+ u32 __iomem *addr;
+ u32 offset;
+ unsigned int num_ports;
+ int i, port_index;
+
+ addr = &xhci->cap_regs->hcc_params;
+ offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+ if (offset == 0) {
+ xhci_err(xhci, "No Extended Capability registers, "
+ "unable to set up roothub.\n");
+ return -ENODEV;
+ }
+
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+ if (!xhci->port_array)
+ return -ENOMEM;
+
+ /*
+ * For whatever reason, the first capability offset is from the
+ * capability register base, not from the HCCPARAMS register.
+ * See section 5.3.6 for offset calculation.
+ */
+ addr = &xhci->cap_regs->hc_capbase + offset;
+ while (1) {
+ u32 cap_id;
+
+ cap_id = xhci_readl(xhci, addr);
+ if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+ xhci_add_in_port(xhci, num_ports, addr,
+ (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+ offset = XHCI_EXT_CAPS_NEXT(cap_id);
+ if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+ == num_ports)
+ break;
+ /*
+ * Once you're into the Extended Capabilities, the offset is
+ * always relative to the register holding the offset.
+ */
+ addr += offset;
+ }
+
+ if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+ xhci_warn(xhci, "No ports on the roothubs?\n");
+ return -ENODEV;
+ }
+ xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+ xhci->num_usb2_ports, xhci->num_usb3_ports);
+ /*
+ * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+ * Not sure how the USB core will handle a hub with no ports...
+ */
+ if (xhci->num_usb2_ports) {
+ xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+ xhci->num_usb2_ports, flags);
+ if (!xhci->usb2_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++) {
+ if (xhci->port_array[i] == 0x03 ||
+ xhci->port_array[i] == 0 ||
+ xhci->port_array[i] == -1)
+ continue;
+
+ xhci->usb2_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 2.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb2_ports[port_index]);
+ port_index++;
+ }
+ }
+ if (xhci->num_usb3_ports) {
+ xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+ xhci->num_usb3_ports, flags);
+ if (!xhci->usb3_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] == 0x03) {
+ xhci->usb3_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 3.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb3_ports[port_index]);
+ port_index++;
+ }
+ }
+ return 0;
+}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
@@ -1809,6 +1976,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
if (scratchpad_alloc(xhci, flags))
goto fail;
+ if (xhci_setup_port_arrays(xhci, flags))
+ goto fail;
return 0;
generated by cgit v1.2.3 (git 2.0.4) at 2024-11-08 06:58:09 +0000