diff options
Diffstat (limited to 'drivers/usb/host/xhci.c')
-rw-r--r-- | drivers/usb/host/xhci.c | 40 |
1 files changed, 33 insertions, 7 deletions
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 1e6d7579709e..896b928f7412 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -146,7 +146,8 @@ static int xhci_start(struct xhci_hcd *xhci) "waited %u microseconds.\n", XHCI_MAX_HALT_USEC); if (!ret) - xhci->xhc_state &= ~(XHCI_STATE_HALTED | XHCI_STATE_DYING); + /* clear state flags. Including dying, halted or removing */ + xhci->xhc_state = 0; return ret; } @@ -1113,8 +1114,8 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Resume root hubs only when have pending events. */ status = readl(&xhci->op_regs->status); if (status & STS_EINT) { - usb_hcd_resume_root_hub(hcd); usb_hcd_resume_root_hub(xhci->shared_hcd); + usb_hcd_resume_root_hub(hcd); } } @@ -1129,10 +1130,10 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) /* Re-enable port polling. */ xhci_dbg(xhci, "%s: starting port polling.\n", __func__); - set_bit(HCD_FLAG_POLL_RH, &hcd->flags); - usb_hcd_poll_rh_status(hcd); set_bit(HCD_FLAG_POLL_RH, &xhci->shared_hcd->flags); usb_hcd_poll_rh_status(xhci->shared_hcd); + set_bit(HCD_FLAG_POLL_RH, &hcd->flags); + usb_hcd_poll_rh_status(hcd); return retval; } @@ -1559,7 +1560,9 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "HW died, freeing TD."); urb_priv = urb->hcpriv; - for (i = urb_priv->td_cnt; i < urb_priv->length; i++) { + for (i = urb_priv->td_cnt; + i < urb_priv->length && xhci->devs[urb->dev->slot_id]; + i++) { td = urb_priv->td[i]; if (!list_empty(&td->td_list)) list_del_init(&td->td_list); @@ -2761,7 +2764,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) if (ret <= 0) return ret; xhci = hcd_to_xhci(hcd); - if (xhci->xhc_state & XHCI_STATE_DYING) + if ((xhci->xhc_state & XHCI_STATE_DYING) || + (xhci->xhc_state & XHCI_STATE_REMOVING)) return -ENODEV; xhci_dbg(xhci, "%s called for udev %p\n", __func__, udev); @@ -3810,7 +3814,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev, mutex_lock(&xhci->mutex); - if (xhci->xhc_state) /* dying or halted */ + if (xhci->xhc_state) /* dying, removing or halted */ goto out; if (!udev->slot_id) { @@ -4794,8 +4798,16 @@ int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev, ctrl_ctx->add_flags |= cpu_to_le32(SLOT_FLAG); slot_ctx = xhci_get_slot_ctx(xhci, config_cmd->in_ctx); slot_ctx->dev_info |= cpu_to_le32(DEV_HUB); + /* + * refer to section 6.2.2: MTT should be 0 for full speed hub, + * but it may be already set to 1 when setup an xHCI virtual + * device, so clear it anyway. + */ if (tt->multi) slot_ctx->dev_info |= cpu_to_le32(DEV_MTT); + else if (hdev->speed == USB_SPEED_FULL) + slot_ctx->dev_info &= cpu_to_le32(~DEV_MTT); + if (xhci->hci_version > 0x95) { xhci_dbg(xhci, "xHCI version %x needs hub " "TT think time and number of ports\n", @@ -4929,6 +4941,16 @@ int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks) goto error; xhci_dbg(xhci, "Reset complete\n"); + /* + * On some xHCI controllers (e.g. R-Car SoCs), the AC64 bit (bit 0) + * of HCCPARAMS1 is set to 1. However, the xHCs don't support 64-bit + * address memory pointers actually. So, this driver clears the AC64 + * bit of xhci->hcc_params to call dma_set_coherent_mask(dev, + * DMA_BIT_MASK(32)) in this xhci_gen_setup(). + */ + if (xhci->quirks & XHCI_NO_64BIT_SUPPORT) + xhci->hcc_params &= ~BIT(0); + /* Set dma_mask and coherent_dma_mask to 64-bits, * if xHC supports 64-bit addressing */ if (HCC_64BIT_ADDR(xhci->hcc_params) && @@ -5046,6 +5068,10 @@ static int __init xhci_hcd_init(void) BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); + + if (usb_disabled()) + return -ENODEV; + return 0; } |