summaryrefslogtreecommitdiff
path: root/drivers/usb/host
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/usb/host')
-rw-r--r--drivers/usb/host/ehci-hcd.c12
-rw-r--r--drivers/usb/host/ehci-omap.c1
-rw-r--r--drivers/usb/host/fotg210-hcd.c4
-rw-r--r--drivers/usb/host/ohci-hcd.c18
-rw-r--r--drivers/usb/host/oxu210hp-hcd.c4
-rw-r--r--drivers/usb/host/sl811-hcd.c9
-rw-r--r--drivers/usb/host/xhci-ext-caps.h5
-rw-r--r--drivers/usb/host/xhci-hub.c4
-rw-r--r--drivers/usb/host/xhci-ring.c2
-rw-r--r--drivers/usb/host/xhci.c46
10 files changed, 70 insertions, 35 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 330e05acf5f7..b9ad19d1b400 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -575,6 +575,7 @@ static int ehci_run (struct usb_hcd *hcd)
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
u32 temp;
u32 hcc_params;
+ int rc;
hcd->uses_new_polling = 1;
@@ -630,9 +631,20 @@ static int ehci_run (struct usb_hcd *hcd)
down_write(&ehci_cf_port_reset_rwsem);
ehci->rh_state = EHCI_RH_RUNNING;
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+
+ /* Wait until HC become operational */
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
msleep(5);
+ rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000);
+
up_write(&ehci_cf_port_reset_rwsem);
+
+ if (rc) {
+ ehci_err(ehci, "USB %x.%x, controller refused to start: %d\n",
+ ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), rc);
+ return rc;
+ }
+
ehci->last_periodic_enable = ktime_get_real();
temp = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c
index cccde8217f28..8e0625cc1801 100644
--- a/drivers/usb/host/ehci-omap.c
+++ b/drivers/usb/host/ehci-omap.c
@@ -237,6 +237,7 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev)
err_pm_runtime:
pm_runtime_put_sync(dev);
+ pm_runtime_disable(dev);
err_phy:
for (i = 0; i < omap->nports; i++) {
diff --git a/drivers/usb/host/fotg210-hcd.c b/drivers/usb/host/fotg210-hcd.c
index 11b3a8c57eab..5dacc3076efd 100644
--- a/drivers/usb/host/fotg210-hcd.c
+++ b/drivers/usb/host/fotg210-hcd.c
@@ -5610,7 +5610,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
struct resource *res;
int irq;
- int retval = -ENODEV;
+ int retval;
struct fotg210_hcd *fotg210;
if (usb_disabled())
@@ -5630,7 +5630,7 @@ static int fotg210_hcd_probe(struct platform_device *pdev)
hcd = usb_create_hcd(&fotg210_fotg210_hc_driver, dev,
dev_name(dev));
if (!hcd) {
- dev_err(dev, "failed to create hcd with err %d\n", retval);
+ dev_err(dev, "failed to create hcd\n");
retval = -ENOMEM;
goto fail_create_hcd;
}
diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c
index 27bd3e49fe8e..570b3fd1f5d0 100644
--- a/drivers/usb/host/ohci-hcd.c
+++ b/drivers/usb/host/ohci-hcd.c
@@ -99,7 +99,7 @@ static void io_watchdog_func(unsigned long _ohci);
/* Some boards misreport power switching/overcurrent */
-static bool distrust_firmware = 1;
+static bool distrust_firmware;
module_param (distrust_firmware, bool, 0);
MODULE_PARM_DESC (distrust_firmware,
"true to distrust firmware power/overcurrent setup");
@@ -663,20 +663,24 @@ retry:
/* handle root hub init quirks ... */
val = roothub_a (ohci);
- val &= ~(RH_A_PSM | RH_A_OCPM);
+ /* Configure for per-port over-current protection by default */
+ val &= ~RH_A_NOCP;
+ val |= RH_A_OCPM;
if (ohci->flags & OHCI_QUIRK_SUPERIO) {
- /* NSC 87560 and maybe others */
+ /* NSC 87560 and maybe others.
+ * Ganged power switching, no over-current protection.
+ */
val |= RH_A_NOCP;
- val &= ~(RH_A_POTPGT | RH_A_NPS);
- ohci_writel (ohci, val, &ohci->regs->roothub.a);
+ val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM);
} else if ((ohci->flags & OHCI_QUIRK_AMD756) ||
(ohci->flags & OHCI_QUIRK_HUB_POWER)) {
/* hub power always on; required for AMD-756 and some
- * Mac platforms. ganged overcurrent reporting, if any.
+ * Mac platforms.
*/
val |= RH_A_NPS;
- ohci_writel (ohci, val, &ohci->regs->roothub.a);
}
+ ohci_writel(ohci, val, &ohci->regs->roothub.a);
+
ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status);
ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM,
&ohci->regs->roothub.b);
diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c
index 1f139d82cee0..d1e0d9d4e7a6 100644
--- a/drivers/usb/host/oxu210hp-hcd.c
+++ b/drivers/usb/host/oxu210hp-hcd.c
@@ -3741,8 +3741,10 @@ static struct usb_hcd *oxu_create(struct platform_device *pdev,
oxu->is_otg = otg;
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
- if (ret < 0)
+ if (ret < 0) {
+ usb_put_hcd(hcd);
return ERR_PTR(ret);
+ }
device_wakeup_enable(hcd->self.controller);
return hcd;
diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c
index fd2a11473be7..455c59fe32fa 100644
--- a/drivers/usb/host/sl811-hcd.c
+++ b/drivers/usb/host/sl811-hcd.c
@@ -1286,11 +1286,10 @@ sl811h_hub_control(
goto error;
put_unaligned_le32(sl811->port1, buf);
-#ifndef VERBOSE
- if (*(u16*)(buf+2)) /* only if wPortChange is interesting */
-#endif
- dev_dbg(hcd->self.controller, "GetPortStatus %08x\n",
- sl811->port1);
+ if (__is_defined(VERBOSE) ||
+ *(u16*)(buf+2)) /* only if wPortChange is interesting */
+ dev_dbg(hcd->self.controller, "GetPortStatus %08x\n",
+ sl811->port1);
break;
case SetPortFeature:
if (wIndex != 1 || wLength != 0)
diff --git a/drivers/usb/host/xhci-ext-caps.h b/drivers/usb/host/xhci-ext-caps.h
index 9fe3225e6c61..35ac83e86c94 100644
--- a/drivers/usb/host/xhci-ext-caps.h
+++ b/drivers/usb/host/xhci-ext-caps.h
@@ -19,8 +19,9 @@
* along with this program; if not, write to the Free Software Foundation,
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
-/* Up to 16 ms to halt an HC */
-#define XHCI_MAX_HALT_USEC (16*1000)
+
+/* HC should halt within 16 ms, but use 32 ms as some hosts take longer */
+#define XHCI_MAX_HALT_USEC (32 * 1000)
/* HC not running - set to 1 when run/stop bit is cleared. */
#define XHCI_STS_HALT (1<<0)
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index 6891738278bc..74d5975bf98f 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -1400,6 +1400,10 @@ int xhci_bus_suspend(struct usb_hcd *hcd)
hcd->state = HC_STATE_SUSPENDED;
bus_state->next_statechange = jiffies + msecs_to_jiffies(10);
spin_unlock_irqrestore(&xhci->lock, flags);
+
+ if (bus_state->bus_suspended)
+ usleep_range(5000, 10000);
+
return 0;
}
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 536251c6149d..a39b7a49b7cf 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -2840,6 +2840,8 @@ static void queue_trb(struct xhci_hcd *xhci, struct xhci_ring *ring,
trb->field[0] = cpu_to_le32(field1);
trb->field[1] = cpu_to_le32(field2);
trb->field[2] = cpu_to_le32(field3);
+ /* make sure TRB is fully written before giving it to the controller */
+ wmb();
trb->field[3] = cpu_to_le32(field4);
inc_enq(xhci, ring, more_trbs_coming);
}
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index 51d84332eb78..b1994b03341f 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -1018,6 +1018,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
struct usb_hcd *secondary_hcd;
int retval = 0;
bool comp_timer_running = false;
+ bool pending_portevent = false;
if (!hcd->state)
return 0;
@@ -1151,13 +1152,22 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
done:
if (retval == 0) {
- /* Resume root hubs only when have pending events. */
- if (xhci_pending_portevent(xhci)) {
+ /*
+ * Resume roothubs only if there are pending events.
+ * USB 3 devices resend U3 LFPS wake after a 100ms delay if
+ * the first wake signalling failed, give it that chance.
+ */
+ pending_portevent = xhci_pending_portevent(xhci);
+ if (!pending_portevent) {
+ msleep(120);
+ pending_portevent = xhci_pending_portevent(xhci);
+ }
+
+ if (pending_portevent) {
usb_hcd_resume_root_hub(xhci->shared_hcd);
usb_hcd_resume_root_hub(hcd);
}
}
-
/*
* If system is subject to the Quirk, Compliance Mode Timer needs to
* be re-initialized Always after a system resume. Ports are subject
@@ -1292,7 +1302,7 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci,
* we need to issue an evaluate context command and wait on it.
*/
static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
- unsigned int ep_index, struct urb *urb)
+ unsigned int ep_index, struct urb *urb, gfp_t mem_flags)
{
struct xhci_container_ctx *out_ctx;
struct xhci_input_control_ctx *ctrl_ctx;
@@ -1323,7 +1333,7 @@ static int xhci_check_maxpacket(struct xhci_hcd *xhci, unsigned int slot_id,
* changes max packet sizes.
*/
- command = xhci_alloc_command(xhci, false, true, GFP_KERNEL);
+ command = xhci_alloc_command(xhci, false, true, mem_flags);
if (!command)
return -ENOMEM;
@@ -1430,7 +1440,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
*/
if (urb->dev->speed == USB_SPEED_FULL) {
ret = xhci_check_maxpacket(xhci, slot_id,
- ep_index, urb);
+ ep_index, urb, mem_flags);
if (ret < 0) {
xhci_urb_free_priv(urb_priv);
urb->hcpriv = NULL;
@@ -4428,19 +4438,19 @@ static u16 xhci_calculate_u1_timeout(struct xhci_hcd *xhci,
{
unsigned long long timeout_ns;
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
+ else
+ timeout_ns = udev->u1_params.sel;
+
/* Prevent U1 if service interval is shorter than U1 exit latency */
if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
- if (xhci_service_interval_to_ns(desc) <= udev->u1_params.mel) {
+ if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
dev_dbg(&udev->dev, "Disable U1, ESIT shorter than exit latency\n");
return USB3_LPM_DISABLED;
}
}
- if (xhci->quirks & XHCI_INTEL_HOST)
- timeout_ns = xhci_calculate_intel_u1_timeout(udev, desc);
- else
- timeout_ns = udev->u1_params.sel;
-
/* The U1 timeout is encoded in 1us intervals.
* Don't return a timeout of zero, because that's USB3_LPM_DISABLED.
*/
@@ -4492,19 +4502,19 @@ static u16 xhci_calculate_u2_timeout(struct xhci_hcd *xhci,
{
unsigned long long timeout_ns;
+ if (xhci->quirks & XHCI_INTEL_HOST)
+ timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
+ else
+ timeout_ns = udev->u2_params.sel;
+
/* Prevent U2 if service interval is shorter than U2 exit latency */
if (usb_endpoint_xfer_int(desc) || usb_endpoint_xfer_isoc(desc)) {
- if (xhci_service_interval_to_ns(desc) <= udev->u2_params.mel) {
+ if (xhci_service_interval_to_ns(desc) <= timeout_ns) {
dev_dbg(&udev->dev, "Disable U2, ESIT shorter than exit latency\n");
return USB3_LPM_DISABLED;
}
}
- if (xhci->quirks & XHCI_INTEL_HOST)
- timeout_ns = xhci_calculate_intel_u2_timeout(udev, desc);
- else
- timeout_ns = udev->u2_params.sel;
-
/* The U2 timeout is encoded in 256us intervals */
timeout_ns = DIV_ROUND_UP_ULL(timeout_ns, 256 * 1000);
/* If the necessary timeout value is bigger than what we can set in the
generated by cgit v1.2.3 (git 2.0.4) at 2024-06-29 15:28:25 +0000