diff options
Diffstat (limited to 'drivers/usb/host')
-rw-r--r-- | drivers/usb/host/ehci-hcd.c | 2 | ||||
-rw-r--r-- | drivers/usb/host/ehci-pci.c | 4 | ||||
-rw-r--r-- | drivers/usb/host/ehci-q.c | 16 | ||||
-rw-r--r-- | drivers/usb/host/ehci-sched.c | 12 | ||||
-rw-r--r-- | drivers/usb/host/ehci.h | 2 | ||||
-rw-r--r-- | drivers/usb/host/ohci-omap.c | 6 | ||||
-rw-r--r-- | drivers/usb/host/sl811_cs.c | 49 |
7 files changed, 51 insertions, 40 deletions
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 9835e0713943..f5f5601701c9 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -28,6 +28,7 @@ #include <linux/errno.h> #include <linux/init.h> #include <linux/timer.h> +#include <linux/ktime.h> #include <linux/list.h> #include <linux/interrupt.h> #include <linux/usb.h> @@ -676,6 +677,7 @@ static int ehci_run (struct usb_hcd *hcd) ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); up_write(&ehci_cf_port_reset_rwsem); + ehci->last_periodic_enable = ktime_get_real(); temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci_info (ehci, diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 378861b9d79a..ead5f4f2aa5a 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -111,6 +111,10 @@ static int ehci_pci_setup(struct usb_hcd *hcd) switch (pdev->vendor) { case PCI_VENDOR_ID_INTEL: ehci->need_io_watchdog = 0; + if (pdev->device == 0x27cc) { + ehci->broken_periodic = 1; + ehci_info(ehci, "using broken periodic workaround\n"); + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 00ad9ce392ed..139a2cc3f641 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -487,8 +487,20 @@ halt: * we must clear the TT buffer (11.17.5). */ if (unlikely(last_status != -EINPROGRESS && - last_status != -EREMOTEIO)) - ehci_clear_tt_buffer(ehci, qh, urb, token); + last_status != -EREMOTEIO)) { + /* The TT's in some hubs malfunction when they + * receive this request following a STALL (they + * stop sending isochronous packets). Since a + * STALL can't leave the TT buffer in a busy + * state (if you believe Figures 11-48 - 11-51 + * in the USB 2.0 spec), we won't clear the TT + * buffer in this case. Strictly speaking this + * is a violation of the spec. + */ + if (last_status != -EPIPE) + ehci_clear_tt_buffer(ehci, qh, urb, + token); + } } /* if we're removing something not at the queue head, diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index b25cdea93a1f..a5535b5e3fe2 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -475,6 +475,8 @@ static int enable_periodic (struct ehci_hcd *ehci) /* make sure ehci_work scans these */ ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index) % (ehci->periodic_size << 3); + if (unlikely(ehci->broken_periodic)) + ehci->last_periodic_enable = ktime_get_real(); return 0; } @@ -486,6 +488,16 @@ static int disable_periodic (struct ehci_hcd *ehci) if (--ehci->periodic_sched) return 0; + if (unlikely(ehci->broken_periodic)) { + /* delay experimentally determined */ + ktime_t safe = ktime_add_us(ehci->last_periodic_enable, 1000); + ktime_t now = ktime_get_real(); + s64 delay = ktime_us_delta(safe, now); + + if (unlikely(delay > 0)) + udelay(delay); + } + /* did setting PSE not take effect yet? * takes effect only at frame boundaries... */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 064e76821ff5..2d85e21ff282 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -118,6 +118,7 @@ struct ehci_hcd { /* one per controller */ unsigned stamp; unsigned random_frame; unsigned long next_statechange; + ktime_t last_periodic_enable; u32 command; /* SILICON QUIRKS */ @@ -127,6 +128,7 @@ struct ehci_hcd { /* one per controller */ unsigned big_endian_desc:1; unsigned has_amcc_usb23:1; unsigned need_io_watchdog:1; + unsigned broken_periodic:1; /* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6) diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 83cbecd2a1ed..5645f70b9214 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -24,10 +24,10 @@ #include <asm/io.h> #include <asm/mach-types.h> -#include <mach/mux.h> +#include <plat/mux.h> #include <mach/irqs.h> -#include <mach/fpga.h> -#include <mach/usb.h> +#include <plat/fpga.h> +#include <plat/usb.h> /* OMAP-1510 OHCI has its own MMU for DMA */ diff --git a/drivers/usb/host/sl811_cs.c b/drivers/usb/host/sl811_cs.c index 516848dd9b48..39d253e841f6 100644 --- a/drivers/usb/host/sl811_cs.c +++ b/drivers/usb/host/sl811_cs.c @@ -37,28 +37,8 @@ MODULE_LICENSE("GPL"); /* MACROS */ /*====================================================================*/ -#if defined(DEBUG) || defined(PCMCIA_DEBUG) - -static int pc_debug = 0; -module_param(pc_debug, int, 0644); - -#define DBG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG "sl811_cs: " args) - -#else -#define DBG(n, args...) do{}while(0) -#endif /* no debugging */ - #define INFO(args...) printk(KERN_INFO "sl811_cs: " args) -#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0444) - -#define CS_CHECK(fn, ret) \ - do { \ - last_fn = (fn); \ - if ((last_ret = (ret)) != 0) \ - goto cs_failed; \ - } while (0) - /*====================================================================*/ /* VARIABLES */ /*====================================================================*/ @@ -76,7 +56,7 @@ static void sl811_cs_release(struct pcmcia_device * link); static void release_platform_dev(struct device * dev) { - DBG(0, "sl811_cs platform_dev release\n"); + dev_dbg(dev, "sl811_cs platform_dev release\n"); dev->parent = NULL; } @@ -140,7 +120,7 @@ static int sl811_hc_init(struct device *parent, resource_size_t base_addr, static void sl811_cs_detach(struct pcmcia_device *link) { - DBG(0, "sl811_cs_detach(0x%p)\n", link); + dev_dbg(&link->dev, "sl811_cs_detach\n"); sl811_cs_release(link); @@ -150,7 +130,7 @@ static void sl811_cs_detach(struct pcmcia_device *link) static void sl811_cs_release(struct pcmcia_device * link) { - DBG(0, "sl811_cs_release(0x%p)\n", link); + dev_dbg(&link->dev, "sl811_cs_release\n"); pcmcia_disable_device(link); platform_device_unregister(&platform_dev); @@ -205,11 +185,11 @@ static int sl811_cs_config_check(struct pcmcia_device *p_dev, static int sl811_cs_config(struct pcmcia_device *link) { - struct device *parent = &handle_to_dev(link); + struct device *parent = &link->dev; local_info_t *dev = link->priv; - int last_fn, last_ret; + int ret; - DBG(0, "sl811_cs_config(0x%p)\n", link); + dev_dbg(&link->dev, "sl811_cs_config\n"); if (pcmcia_loop_config(link, sl811_cs_config_check, NULL)) goto failed; @@ -217,14 +197,16 @@ static int sl811_cs_config(struct pcmcia_device *link) /* require an IRQ and two registers */ if (!link->io.NumPorts1 || link->io.NumPorts1 < 2) goto failed; - if (link->conf.Attributes & CONF_ENABLE_IRQ) - CS_CHECK(RequestIRQ, - pcmcia_request_irq(link, &link->irq)); - else + if (link->conf.Attributes & CONF_ENABLE_IRQ) { + ret = pcmcia_request_irq(link, &link->irq); + if (ret) + goto failed; + } else goto failed; - CS_CHECK(RequestConfiguration, - pcmcia_request_configuration(link, &link->conf)); + ret = pcmcia_request_configuration(link, &link->conf); + if (ret) + goto failed; sprintf(dev->node.dev_name, driver_name); dev->node.major = dev->node.minor = 0; @@ -241,8 +223,6 @@ static int sl811_cs_config(struct pcmcia_device *link) if (sl811_hc_init(parent, link->io.BasePort1, link->irq.AssignedIRQ) < 0) { -cs_failed: - cs_error(link, last_fn, last_ret); failed: printk(KERN_WARNING "sl811_cs_config failed\n"); sl811_cs_release(link); @@ -263,7 +243,6 @@ static int sl811_cs_probe(struct pcmcia_device *link) /* Initialize */ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE; - link->irq.IRQInfo1 = IRQ_INFO2_VALID|IRQ_LEVEL_ID; link->irq.Handler = NULL; link->conf.Attributes = 0; |