9 files changed, 114 insertions, 348 deletions

diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c
index bf7441afed16..182d39565906 100644
--- a/drivers/usb/host/ehci-au1xxx.c
+++ b/drivers/usb/host/ehci-au1xxx.c
@@ -158,28 +158,10 @@ static int ehci_hcd_au1xxx_drv_remove(struct platform_device *pdev)
 static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	unsigned long flags;
-	int rc = 0;
-
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(10);
-
-	/* Root hub was already suspended. Disable irq emission and
-	 * mark HW unaccessible.  The PM and USB cores make sure that
-	 * the root hub is either suspended or stopped.
-	 */
-	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
-	spin_lock_irqsave(&ehci->lock, flags);
-	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
-	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
-
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	spin_unlock_irqrestore(&ehci->lock, flags);
-
-	// could save FLADJ in case of Vaux power loss
-	// ... we'd only use it to handle clock skew
+	bool do_wakeup = device_may_wakeup(dev);
+	int rc;
 
+	rc = ehci_suspend(hcd, do_wakeup);
 	alchemy_usb_control(ALCHEMY_USB_EHCI0, 0);
 
 	return rc;
@@ -188,56 +170,9 @@ static int ehci_hcd_au1xxx_drv_suspend(struct device *dev)
 static int ehci_hcd_au1xxx_drv_resume(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 
 	alchemy_usb_control(ALCHEMY_USB_EHCI0, 1);
-
-	// maybe restore FLADJ
-
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(100);
-
-	/* Mark hardware accessible again as we are out of D3 state by now */
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	/* If CF is still set, we maintained PCI Vaux power.
-	 * Just undo the effect of ehci_pci_suspend().
-	 */
-	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
-		int	mask = INTR_MASK;
-
-		ehci_prepare_ports_for_controller_resume(ehci);
-		if (!hcd->self.root_hub->do_remote_wakeup)
-			mask &= ~STS_PCD;
-		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
-		ehci_readl(ehci, &ehci->regs->intr_enable);
-		return 0;
-	}
-
-	ehci_dbg(ehci, "lost power, restarting\n");
-	usb_root_hub_lost_power(hcd->self.root_hub);
-
-	/* Else reset, to cope with power loss or flush-to-storage
-	 * style "resume" having let BIOS kick in during reboot.
-	 */
-	(void) ehci_halt(ehci);
-	(void) ehci_reset(ehci);
-
-	/* emptying the schedule aborts any urbs */
-	spin_lock_irq(&ehci->lock);
-	if (ehci->reclaim)
-		end_unlink_async(ehci);
-	ehci_work(ehci);
-	spin_unlock_irq(&ehci->lock);
-
-	ehci_writel(ehci, ehci->command, &ehci->regs->command);
-	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
-	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
-
-	/* here we "know" root ports should always stay powered */
-	ehci_port_power(ehci, 1);
-
-	ehci->rh_state = EHCI_RH_SUSPENDED;
+	ehci_resume(hcd, false);
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c49fc1e7895d..e6823a0cf642 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1242,6 +1242,95 @@ static int ehci_get_frame (struct usb_hcd *hcd)
 }
 
 /*-------------------------------------------------------------------------*/
+
+#ifdef	CONFIG_PM
+
+/* suspend/resume, section 4.3 */
+
+/* These routines handle the generic parts of controller suspend/resume */
+
+static int __maybe_unused ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(10);
+
+	/*
+	 * Root hub was already suspended.  Disable IRQ emission and
+	 * mark HW unaccessible.  The PM and USB cores make sure that
+	 * the root hub is either suspended or stopped.
+	 */
+	ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
+
+	spin_lock_irq(&ehci->lock);
+	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+	(void) ehci_readl(ehci, &ehci->regs->intr_enable);
+
+	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	spin_unlock_irq(&ehci->lock);
+
+	return 0;
+}
+
+/* Returns 0 if power was preserved, 1 if power was lost */
+static int __maybe_unused ehci_resume(struct usb_hcd *hcd, bool hibernated)
+{
+	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
+
+	if (time_before(jiffies, ehci->next_statechange))
+		msleep(100);
+
+	/* Mark hardware accessible again as we are back to full power by now */
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+
+	/*
+	 * If CF is still set and we aren't resuming from hibernation
+	 * then we maintained suspend power.
+	 * Just undo the effect of ehci_suspend().
+	 */
+	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
+			!hibernated) {
+		int	mask = INTR_MASK;
+
+		ehci_prepare_ports_for_controller_resume(ehci);
+		if (!hcd->self.root_hub->do_remote_wakeup)
+			mask &= ~STS_PCD;
+		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+		ehci_readl(ehci, &ehci->regs->intr_enable);
+		return 0;
+	}
+
+	/*
+	 * Else reset, to cope with power loss or resume from hibernation
+	 * having let the firmware kick in during reboot.
+	 */
+	usb_root_hub_lost_power(hcd->self.root_hub);
+	(void) ehci_halt(ehci);
+	(void) ehci_reset(ehci);
+
+	/* emptying the schedule aborts any urbs */
+	spin_lock_irq(&ehci->lock);
+	if (ehci->reclaim)
+		end_unlink_async(ehci);
+	ehci_work(ehci);
+	spin_unlock_irq(&ehci->lock);
+
+	ehci_writel(ehci, ehci->command, &ehci->regs->command);
+	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
+
+	/* here we "know" root ports should always stay powered */
+	ehci_port_power(ehci, 1);
+
+	ehci->rh_state = EHCI_RH_SUSPENDED;
+	return 1;
+}
+
+#endif
+
+/*-------------------------------------------------------------------------*/
+
 /*
  * The EHCI in ChipIdea HDRC cannot be a separate module or device,
  * because its registers (and irq) are shared between host/gadget/otg
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index db05e358677a..b3e2d66e95bb 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -107,7 +107,7 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci)
 	ehci->owned_ports = 0;
 }
 
-static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci)
+static int ehci_port_change(struct ehci_hcd *ehci)
 {
 	int i = HCS_N_PORTS(ehci->hcs_params);
 
@@ -128,7 +128,7 @@ static int __maybe_unused ehci_port_change(struct ehci_hcd *ehci)
 	return 0;
 }
 
-static __maybe_unused void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
+static void ehci_adjust_port_wakeup_flags(struct ehci_hcd *ehci,
 		bool suspending, bool do_wakeup)
 {
 	int		port;
diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c
index 6b4ffb598db1..17dd9e94001e 100644
--- a/drivers/usb/host/ehci-msm.c
+++ b/drivers/usb/host/ehci-msm.c
@@ -198,24 +198,11 @@ static int __devexit ehci_msm_remove(struct platform_device *pdev)
 static int ehci_msm_pm_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	bool wakeup = device_may_wakeup(dev);
+	bool do_wakeup = device_may_wakeup(dev);
 
 	dev_dbg(dev, "ehci-msm PM suspend\n");
 
-	/*
-	 * EHCI helper function has also the same check before manipulating
-	 * port wakeup flags.  We do check here the same condition before
-	 * calling the same helper function to avoid bringing hardware
-	 * from Low power mode when there is no need for adjusting port
-	 * wakeup flags.
-	 */
-	if (hcd->self.root_hub->do_remote_wakeup && !wakeup) {
-		pm_runtime_resume(dev);
-		ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
-				wakeup);
-	}
-
-	return 0;
+	return ehci_suspend(hcd, do_wakeup);
 }
 
 static int ehci_msm_pm_resume(struct device *dev)
@@ -223,7 +210,7 @@ static int ehci_msm_pm_resume(struct device *dev)
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 
 	dev_dbg(dev, "ehci-msm PM resume\n");
-	ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd));
+	ehci_resume(hcd, false);
 
 	return 0;
 }
diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c
index 123481793a47..6e767bce0605 100644
--- a/drivers/usb/host/ehci-pci.c
+++ b/drivers/usb/host/ehci-pci.c
@@ -331,29 +331,7 @@ done:
 
 static int ehci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
 {
-	struct ehci_hcd		*ehci = hcd_to_ehci(hcd);
-	unsigned long		flags;
-	int			rc = 0;
-
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(10);
-
-	/* Root hub was already suspended. Disable irq emission and
-	 * mark HW unaccessible.  The PM and USB cores make sure that
-	 * the root hub is either suspended or stopped.
-	 */
-	ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
-	spin_lock_irqsave (&ehci->lock, flags);
-	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
-	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
-
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	spin_unlock_irqrestore (&ehci->lock, flags);
-
-	// could save FLADJ in case of Vaux power loss
-	// ... we'd only use it to handle clock skew
-
-	return rc;
+	return ehci_suspend(hcd, do_wakeup);
 }
 
 static bool usb_is_intel_switchable_ehci(struct pci_dev *pdev)
@@ -402,54 +380,8 @@ static int ehci_pci_resume(struct usb_hcd *hcd, bool hibernated)
 	if (usb_is_intel_switchable_ehci(pdev))
 		ehci_enable_xhci_companion();
 
-	// maybe restore FLADJ
-
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(100);
-
-	/* Mark hardware accessible again as we are out of D3 state by now */
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	/* If CF is still set and we aren't resuming from hibernation
-	 * then we maintained PCI Vaux power.
-	 * Just undo the effect of ehci_pci_suspend().
-	 */
-	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
-				!hibernated) {
-		int	mask = INTR_MASK;
-
-		ehci_prepare_ports_for_controller_resume(ehci);
-		if (!hcd->self.root_hub->do_remote_wakeup)
-			mask &= ~STS_PCD;
-		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
-		ehci_readl(ehci, &ehci->regs->intr_enable);
-		return 0;
-	}
-
-	usb_root_hub_lost_power(hcd->self.root_hub);
-
-	/* Else reset, to cope with power loss or flush-to-storage
-	 * style "resume" having let BIOS kick in during reboot.
-	 */
-	(void) ehci_halt(ehci);
-	(void) ehci_reset(ehci);
-	(void) ehci_pci_reinit(ehci, pdev);
-
-	/* emptying the schedule aborts any urbs */
-	spin_lock_irq(&ehci->lock);
-	if (ehci->reclaim)
-		end_unlink_async(ehci);
-	ehci_work(ehci);
-	spin_unlock_irq(&ehci->lock);
-
-	ehci_writel(ehci, ehci->command, &ehci->regs->command);
-	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
-	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
-
-	/* here we "know" root ports should always stay powered */
-	ehci_port_power(ehci, 1);
-
-	ehci->rh_state = EHCI_RH_SUSPENDED;
+	if (ehci_resume(hcd, hibernated) != 0)
+		(void) ehci_pci_reinit(ehci, pdev);
 	return 0;
 }
 #endif
diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c
index dfe881a34ae2..4b1d896d5a22 100644
--- a/drivers/usb/host/ehci-platform.c
+++ b/drivers/usb/host/ehci-platform.c
@@ -153,17 +153,16 @@ static int __devexit ehci_platform_remove(struct platform_device *dev)
 static int ehci_platform_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	bool wakeup = device_may_wakeup(dev);
+	bool do_wakeup = device_may_wakeup(dev);
 
-	ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd), wakeup);
-	return 0;
+	return ehci_suspend(hcd, do_wakeup);
 }
 
 static int ehci_platform_resume(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
 
-	ehci_prepare_ports_for_controller_resume(hcd_to_ehci(hcd));
+	ehci_resume(hcd, false);
 	return 0;
 }
 
diff --git a/drivers/usb/host/ehci-s5p.c b/drivers/usb/host/ehci-s5p.c
index 1e483f052ff7..c7e0936d4a7c 100644
--- a/drivers/usb/host/ehci-s5p.c
+++ b/drivers/usb/host/ehci-s5p.c
@@ -200,27 +200,12 @@ static int s5p_ehci_suspend(struct device *dev)
 {
 	struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
 	struct usb_hcd *hcd = s5p_ehci->hcd;
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+	bool do_wakeup = device_may_wakeup(dev);
 	struct platform_device *pdev = to_platform_device(dev);
 	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
-	unsigned long flags;
-	int rc = 0;
+	int rc;
 
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(20);
-
-	/*
-	 * Root hub was already suspended. Disable irq emission and
-	 * mark HW unaccessible.  The PM and USB cores make sure that
-	 * the root hub is either suspended or stopped.
-	 */
-	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
-	spin_lock_irqsave(&ehci->lock, flags);
-	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
-	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
-
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	spin_unlock_irqrestore(&ehci->lock, flags);
+	rc = ehci_suspend(hcd, do_wakeup);
 
 	if (pdata && pdata->phy_exit)
 		pdata->phy_exit(pdev, S5P_USB_PHY_HOST);
@@ -234,7 +219,6 @@ static int s5p_ehci_resume(struct device *dev)
 {
 	struct s5p_ehci_hcd *s5p_ehci = dev_get_drvdata(dev);
 	struct usb_hcd *hcd = s5p_ehci->hcd;
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	struct platform_device *pdev = to_platform_device(dev);
 	struct s5p_ehci_platdata *pdata = pdev->dev.platform_data;
 
@@ -246,44 +230,7 @@ static int s5p_ehci_resume(struct device *dev)
 	/* DMA burst Enable */
 	writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
 
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(100);
-
-	/* Mark hardware accessible again as we are out of D3 state by now */
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
-		int	mask = INTR_MASK;
-
-		ehci_prepare_ports_for_controller_resume(ehci);
-		if (!hcd->self.root_hub->do_remote_wakeup)
-			mask &= ~STS_PCD;
-		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
-		ehci_readl(ehci, &ehci->regs->intr_enable);
-		return 0;
-	}
-
-	usb_root_hub_lost_power(hcd->self.root_hub);
-
-	(void) ehci_halt(ehci);
-	(void) ehci_reset(ehci);
-
-	/* emptying the schedule aborts any urbs */
-	spin_lock_irq(&ehci->lock);
-	if (ehci->reclaim)
-		end_unlink_async(ehci);
-	ehci_work(ehci);
-	spin_unlock_irq(&ehci->lock);
-
-	ehci_writel(ehci, ehci->command, &ehci->regs->command);
-	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
-	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
-
-	/* here we "know" root ports should always stay powered */
-	ehci_port_power(ehci, 1);
-
-	ehci->rh_state = EHCI_RH_SUSPENDED;
-
+	ehci_resume(hcd, false);
 	return 0;
 }
 #else
diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c
index cc199e87a7a9..58c96bd50d22 100644
--- a/drivers/usb/host/ehci-sead3.c
+++ b/drivers/usb/host/ehci-sead3.c
@@ -160,84 +160,16 @@ static int ehci_hcd_sead3_drv_remove(struct platform_device *pdev)
 static int ehci_hcd_sead3_drv_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	unsigned long flags;
-	int rc = 0;
-
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(20);
-
-	/* Root hub was already suspended. Disable irq emission and
-	 * mark HW unaccessible.  The PM and USB cores make sure that
-	 * the root hub is either suspended or stopped.
-	 */
-	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
-	spin_lock_irqsave(&ehci->lock, flags);
-	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
-	(void)ehci_readl(ehci, &ehci->regs->intr_enable);
-
-	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	spin_unlock_irqrestore(&ehci->lock, flags);
+	bool do_wakeup = device_may_wakeup(dev);
 
-	/* could save FLADJ in case of Vaux power loss
-	 * ... we'd only use it to handle clock skew
-	 */
-
-	return rc;
+	return ehci_suspend(hcd, do_wakeup);
 }
 
 static int ehci_hcd_sead3_drv_resume(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
-	/* maybe restore FLADJ. */
-
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(100);
-
-	/* Mark hardware accessible again as we are out of D3 state by now */
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-
-	/* If CF is still set, we maintained PCI Vaux power.
-	 * Just undo the effect of ehci_pci_suspend().
-	 */
-	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
-		int	mask = INTR_MASK;
-
-		ehci_prepare_ports_for_controller_resume(ehci);
-		if (!hcd->self.root_hub->do_remote_wakeup)
-			mask &= ~STS_PCD;
-		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
-		ehci_readl(ehci, &ehci->regs->intr_enable);
-		return 0;
-	}
-
-	ehci_dbg(ehci, "lost power, restarting\n");
-	usb_root_hub_lost_power(hcd->self.root_hub);
-
-	/* Else reset, to cope with power loss or flush-to-storage
-	 * style "resume" having let BIOS kick in during reboot.
-	 */
-	(void) ehci_halt(ehci);
-	(void) ehci_reset(ehci);
-
-	/* emptying the schedule aborts any urbs */
-	spin_lock_irq(&ehci->lock);
-	if (ehci->reclaim)
-		end_unlink_async(ehci);
-	ehci_work(ehci);
-	spin_unlock_irq(&ehci->lock);
-
-	ehci_writel(ehci, ehci->command, &ehci->regs->command);
-	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
-	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
-
-	/* here we "know" root ports should always stay powered */
-	ehci_port_power(ehci, 1);
-
-	ehci->rh_state = EHCI_RH_SUSPENDED;
 
+	ehci_resume(hcd, false);
 	return 0;
 }
 
diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c
index 37ba8c8d2fd0..7ed533e6cca8 100644
--- a/drivers/usb/host/ehci-spear.c
+++ b/drivers/usb/host/ehci-spear.c
@@ -97,71 +97,16 @@ static const struct hc_driver ehci_spear_hc_driver = {
 static int ehci_spear_drv_suspend(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-	unsigned long flags;
-	int rc = 0;
-
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(10);
-
-	/*
-	 * Root hub was already suspended. Disable irq emission and mark HW
-	 * unaccessible. The PM and USB cores make sure that the root hub is
-	 * either suspended or stopped.
-	 */
-	spin_lock_irqsave(&ehci->lock, flags);
-	ehci_prepare_ports_for_controller_suspend(ehci, device_may_wakeup(dev));
-	ehci_writel(ehci, 0, &ehci->regs->intr_enable);
-	ehci_readl(ehci, &ehci->regs->intr_enable);
-	spin_unlock_irqrestore(&ehci->lock, flags);
+	bool do_wakeup = device_may_wakeup(dev);
 
-	return rc;
+	return ehci_suspend(hcd, do_wakeup);
 }
 
 static int ehci_spear_drv_resume(struct device *dev)
 {
 	struct usb_hcd *hcd = dev_get_drvdata(dev);
-	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
-
-	if (time_before(jiffies, ehci->next_statechange))
-		msleep(100);
-
-	if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
-		int mask = INTR_MASK;
-
-		ehci_prepare_ports_for_controller_resume(ehci);
-
-		if (!hcd->self.root_hub->do_remote_wakeup)
-			mask &= ~STS_PCD;
-
-		ehci_writel(ehci, mask, &ehci->regs->intr_enable);
-		ehci_readl(ehci, &ehci->regs->intr_enable);
-		return 0;
-	}
-
-	usb_root_hub_lost_power(hcd->self.root_hub);
-
-	/*
-	 * Else reset, to cope with power loss or flush-to-storage style
-	 * "resume" having let BIOS kick in during reboot.
-	 */
-	ehci_halt(ehci);
-	ehci_reset(ehci);
-
-	/* emptying the schedule aborts any urbs */
-	spin_lock_irq(&ehci->lock);
-	if (ehci->reclaim)
-		end_unlink_async(ehci);
-
-	ehci_work(ehci);
-	spin_unlock_irq(&ehci->lock);
-
-	ehci_writel(ehci, ehci->command, &ehci->regs->command);
-	ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
-	ehci_readl(ehci, &ehci->regs->command);	/* unblock posted writes */
 
-	/* here we "know" root ports should always stay powered */
-	ehci_port_power(ehci, 1);
+	ehci_resume(hcd, false);
 	return 0;
 }
 #endif /* CONFIG_PM */