diff options
Diffstat (limited to 'drivers/usb/musb/musb_host.c')
-rw-r--r-- | drivers/usb/musb/musb_host.c | 93 |
1 files changed, 58 insertions, 35 deletions
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index a035ceccf950..6dbbd0786a6a 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb) static struct musb_qh * musb_giveback(struct musb_qh *qh, struct urb *urb, int status) { - int is_in; struct musb_hw_ep *ep = qh->hw_ep; struct musb *musb = ep->musb; + int is_in = usb_pipein(urb->pipe); int ready = qh->is_ready; - if (ep->is_shared_fifo) - is_in = 1; - else - is_in = usb_pipein(urb->pipe); - /* save toggle eagerly, for paranoia */ switch (qh->type) { case USB_ENDPOINT_XFER_BULK: @@ -432,7 +427,7 @@ musb_advance_schedule(struct musb *musb, struct urb *urb, else qh = musb_giveback(qh, urb, urb->status); - if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) { + if (qh != NULL && qh->is_ready) { DBG(4, "... next ep%d %cX urb %p\n", hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh)); @@ -942,8 +937,8 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) switch (musb->ep0_stage) { case MUSB_EP0_IN: fifo_dest = urb->transfer_buffer + urb->actual_length; - fifo_count = min(len, ((u16) (urb->transfer_buffer_length - - urb->actual_length))); + fifo_count = min_t(size_t, len, urb->transfer_buffer_length - + urb->actual_length); if (fifo_count < len) urb->status = -EOVERFLOW; @@ -976,10 +971,9 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) } /* FALLTHROUGH */ case MUSB_EP0_OUT: - fifo_count = min(qh->maxpacket, ((u16) - (urb->transfer_buffer_length - - urb->actual_length))); - + fifo_count = min_t(size_t, qh->maxpacket, + urb->transfer_buffer_length - + urb->actual_length); if (fifo_count) { fifo_dest = (u8 *) (urb->transfer_buffer + urb->actual_length); @@ -1161,7 +1155,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; void __iomem *epio = hw_ep->regs; - struct musb_qh *qh = hw_ep->out_qh; + struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh + : hw_ep->out_qh; u32 status = 0; void __iomem *mbase = musb->mregs; struct dma_channel *dma; @@ -1308,7 +1303,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) * packets before updating TXCSR ... other docs disagree ... */ /* PIO: start next packet in this URB */ - wLength = min(qh->maxpacket, (u16) wLength); + if (wLength > qh->maxpacket) + wLength = qh->maxpacket; musb_write_fifo(hw_ep, wLength, buf); qh->segsize = wLength; @@ -1867,19 +1863,21 @@ static int musb_urb_enqueue( } qh->type_reg = type_reg; - /* precompute rxinterval/txinterval register */ - interval = min((u8)16, epd->bInterval); /* log encoding */ + /* Precompute RXINTERVAL/TXINTERVAL register */ switch (qh->type) { case USB_ENDPOINT_XFER_INT: - /* fullspeed uses linear encoding */ - if (USB_SPEED_FULL == urb->dev->speed) { - interval = epd->bInterval; - if (!interval) - interval = 1; + /* + * Full/low speeds use the linear encoding, + * high speed uses the logarithmic encoding. + */ + if (urb->dev->speed <= USB_SPEED_FULL) { + interval = max_t(u8, epd->bInterval, 1); + break; } /* FALLTHROUGH */ case USB_ENDPOINT_XFER_ISOC: - /* iso always uses log encoding */ + /* ISO always uses logarithmic encoding */ + interval = min_t(u8, epd->bInterval, 16); break; default: /* REVISIT we actually want to use NAK limits, hinting to the @@ -2037,9 +2035,9 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) goto done; /* Any URB not actively programmed into endpoint hardware can be - * immediately given back. Such an URB must be at the head of its + * immediately given back; that's any URB not at the head of an * endpoint queue, unless someday we get real DMA queues. And even - * then, it might not be known to the hardware... + * if it's at the head, it might not be known to the hardware... * * Otherwise abort current transfer, pending dma, etc.; urb->status * has already been updated. This is a synchronous abort; it'd be @@ -2078,6 +2076,15 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) qh->is_ready = 0; __musb_giveback(musb, urb, 0); qh->is_ready = ready; + + /* If nothing else (usually musb_giveback) is using it + * and its URB list has emptied, recycle this qh. + */ + if (ready && list_empty(&qh->hep->urb_list)) { + qh->hep->hcpriv = NULL; + list_del(&qh->ring); + kfree(qh); + } } else ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); done: @@ -2093,15 +2100,16 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) unsigned long flags; struct musb *musb = hcd_to_musb(hcd); u8 is_in = epnum & USB_DIR_IN; - struct musb_qh *qh = hep->hcpriv; - struct urb *urb, *tmp; + struct musb_qh *qh; + struct urb *urb; struct list_head *sched; - if (!qh) - return; - spin_lock_irqsave(&musb->lock, flags); + qh = hep->hcpriv; + if (qh == NULL) + goto exit; + switch (qh->type) { case USB_ENDPOINT_XFER_CONTROL: sched = &musb->control; @@ -2135,13 +2143,28 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) /* cleanup */ musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); - } else - urb = NULL; - /* then just nuke all the others */ - list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list) - musb_giveback(qh, urb, -ESHUTDOWN); + /* Then nuke all the others ... and advance the + * queue on hw_ep (e.g. bulk ring) when we're done. + */ + while (!list_empty(&hep->urb_list)) { + urb = next_urb(qh); + urb->status = -ESHUTDOWN; + musb_advance_schedule(musb, urb, qh->hw_ep, is_in); + } + } else { + /* Just empty the queue; the hardware is busy with + * other transfers, and since !qh->is_ready nothing + * will activate any of these as it advances. + */ + while (!list_empty(&hep->urb_list)) + __musb_giveback(musb, next_urb(qh), -ESHUTDOWN); + hep->hcpriv = NULL; + list_del(&qh->ring); + kfree(qh); + } +exit: spin_unlock_irqrestore(&musb->lock, flags); } |